MyklasshipMyklasshipMyklasshipMyklasshipGUIDEGUIDEGUIDEGUIDETM Ver.0

SHIPS OPERATION

1 | P a g e

TYPICAL SHIPYARD STANDARD

LOAD LINE MARKS

Title STANDARD DIMENSION MARKS FOR SHIP’S NAME, PORT OF REGISTRY, OFFICIAL NO., IMO NO. , DRAFT AND LOAD LINE

Issue No 2012/01 Date of Issue 10October 2012 Issued by KYUZRI Verified by RAMLI ADAM

MyklasshipMyklasshipMyklasshipMyklasshipGUIDEGUIDEGUIDEGUIDETM Ver.0

SHIPS OPERATION

2 | P a g e

FLAG ADMINISTRATION CARVING AND MARKING

Malaysia

IMO No = Not less than 200mm Height

Singapore

Name, POR, Official No and IMO No: Height not less than 100mm, Width = 75-80% of Height

Malta

Name and POR = not less than 10cm length and of proportionate breadth

Draft mark = not less than 15cm length

Mauritius

Name and POR = not less than 10cm length and of proportionate breadth

Draft mark fwd and aft: Ship’s built after 1May 1998 = 20cm interval and letters not less than 10cm length

Ship’s built before 1May 1998= 15cm in height

Indian

Name and POR = shall be not less than one decimeter or four inches in height and 1.3 centimeters or half an inch in breadth

PROPOSAL

Name Min. Length or Height = 100mm, Min. breadth or width = 80mm

A POR

Official No

IMO No Min. Heigth = 200mm Min. breadth=160mm

Draft mark Min. Length or Height =150mm Min Breadth or Width = 120mm Interval = 200mm

8

6

150

80

120

200

100