www.myequipauctions.comMyEquipAuctions.comINDUSTRIAL DIVISION

March 26, 2018

www.DIAuctions.com

*3-DAY* ONSITE AUCTION

P.O. Box 569 • Agawam, MA 01001www.DIAuctions.com • 413-363-0857

www.DIAuctions.com

DECOSMO INDUSTRIAL AUCTIONS

Sale in Conjunction

With:

• “FULL 5-AXIS” CNC HORIZONTAL MACHINING CENTERS • “FULL 5-AXIS” CNC VERTICAL MACHINING CENTERS • CNC HORIZONTAL MACHINING CENTERS – “5-AXIS” • CNC VERTICAL MACHINING CENTERS • CNC VERTICAL MACHINING CENTERS – “TWIN SPINDLE”• CNC “MULTI-AXIS” TURNING & MILLING CENTERS • ROBOTIC PICK & PLACE SYSTEM – FREE STANDING • CNC TURNING CENTER • CNC TOOL & CUTTER GRINDERS • CNC GRINDERS (INTERNAL & CYLINDRICAL) • TOOL ROOM – GRINDERS,

SAWS & LATHES (ALL TYPES) • LAPPING, HONING & FINISHING MACHINES (ALL TYPES) • PARTS – DEBURRING & WASHING MACHINES • FORKLIFTS, MATERIAL HANDLING & FLOOR WASHER • INSPECTION – CMM’s, COMPARATORS & MUCH MORE!

• NDT EQUIPMENT & MAGNAFLUX UNITS • INSPECTION EQUIPMENT & TOOLING • TOOLING, MACHINERY & PLANT SUPPORT

AUCTION

EVENT

OF THE

DECADE!

5,000+LOTS

BERKSHIRE INDUSTRIES, INC.LOCATION: 109 APREMONT WAY, WESTFIELD, MA, 01085DATES: APRIL 24TH - APRIL 26TH • 10 AM EST EACH DAYINSPECTION: FRIDAY 4/20 & MONDAY 4/23 - (9:00 AM - 5:00 PM)

Online BiddingPowered by:

2 • March 26, 2018 • www.myequipauctions.com

J&B INDUSTRIAL AUCTIONBUSINESS LIQUIDATION AUCTION - REAL ESTATE & PERSONAL PROPERTY

SATURDAY, APRIL 28th • 9:00 A.M. (CST) 5591 WEST 1000 NORTH • MICHIGAN CITY, INDIANA 46360

DIRECTIONS: Take US 12 East of Michigan City or West of New Buffalo, Michigan to La Porte Co. 1000 North. Auction is at the Corner of US 12 and 1000 North. Watch for LESTINSKY AUCTION SIGNS…

REAL ESTATE4.269 Acres – 7,316 sq. ft. Buildings, Shop, Office - Woods – US 12 FrontageSecure Fenced Lot – Offered in two parcels or entirety This building is currently used as a well maintained industrial & welding fabrication shop however the possibilities are endless, this building could be suitable for other uses as well. There is 6380 Sq. Ft. building that is currently used for the shop. This building has 5 overhead doors, three cranes and an air compressor with air lines throughout the build-ing. There is two office rooms in this building, storage rooms and this building is well lighted and heated throughout. The second building is 936 sg ft. and used for storage. The property is fenced in with gravel parking area. This all sits on 1.179 acres. There is also a 3.090 acre lot with mature shade trees with frontage on US 12. This building and property is a must see to appreciate. TERMS: 10% earnest money down day of auction balance due 30 days or less at closing. Taxes prorated to day of closing. Seller will furnish clear title. Possession of will be given at closing. Property is sold “as-is” and subject to seller confirmation. Property is not being sold subject to financing or inspections. Inspect this property, plan accordingly and bid, as our sellers are motivated to sell.

Call Auction Company for Viewing and additional Terms: Jim Lestinsky 219.608.9615.

BACK-HOE – TRACTORS – FORK LIFTS – TRAILERS Back-Hoe: John Deere 310-A backhoe w/cab, heat, 24” bucket & stationary thumb; 12” back-hoe bucket; Tractors: John Deere M tractor, WF with loader, lights, good rubber; Allis Chalmers WD narrow front, 3 pt. hitch, new tires 13.6-28, lights, (completely over hauled); 7’ 3 pt. grader blade; Forklifts: Clark 6000 lb. gas fork lift dual front tires; Yale 24 volt electric lift truck 2500 lbs. low profile; Raymond electric 24 volt walk behind lift; Trailers: Rice 20’ tandem axle 7,000 lbs. trailer; 12,000 lbs. pole trailer; 16’ tandem axle trailer; Troy Bilt rear tine tiller; log splitter; rear dump dumpster; Winco generator; 22’ aluminum storage container; Honda pressure washer; 2-ton roller; heavy duty yard cart…

MACHINE SHOP EQUIPMENTThe Hendley Machine Co. 3 phase 16” x 48” lathe, 4 jaw chuck, quick change cutting tool; Boyar-Schultz surface grinder w/electric magnet model 612 single phase; turn tables 24, 14 & 8; angle turn table; Bridgeport 3 hp, 3-phase mill w/collars; L&W mill vise; 12” slide table; angle blocks; Presto hydraulic 1000 lb. die cart; Clausing ¾” drill press, 3 phase md. 2224; Bimak 3-phase mill drill; Pratt & Whitney Co. 20 x 72” 3 phase lathe, 4 jaw chuck; Walcott CO. 20” x 100” 3 phase 4 jaw chuck lathe; Stewart Warner Industrial balance machine single phase md. 332140; K.R. Wilson 75 ton hydraulic press md.37F; Miller ac/dc inert gas welder 300 amp, heally arc high frequency, remote control, foot pedal single phase md. 330-A/BP; Belsaw sharpener; 3 set cutting torches; sand blaster w/30 x 48 cabinet with vacuum system; Industrial 8” bench grinder; Pittsburgh compact bender; 70” center Indicator; straightening jig; Bridgeport threader; flat surface stone table 36 x 24; Quincy 2.5 hp, 3 phase air compressor; 17KW Guardian generator; Budget 2-3 ton Bridge cranes w/beams & trolley’s, chain lift; 2 pushers for crane beams; 1 ton crane w/dolly C&M series 626; ½ ton air hoist w/dolly; 2-2 ton chain falls; Sears 6”x12” lathe; black hawk 1 ½ ton bumper jack; Lincoln arc welder; Lincoln power mug 255c aluminum & stainless welder; Hypertherm power max 600 plasma cutter; tire changer machine; 20” steel cut off saw; do all metal master saw; ridged series 300 threader; quick change dyes; 7” band saw w/water cooling; 10 ft. roller table; Lincoln 300 amp portable welder; scaffolding; parts washer; engine/transmission table w/drain; die carts…

FABRICATING METALFlat bar stock; angle stock; round bar; tubing; I beam; round tubing; ¼”-5” bar stock; 20 ft. bar stock; 20 ft. angle; channel; copper; aluminum; stainless pipes; sheet steel 14 ga - 3/8 ga; stainless flat sheet steel various gauges; 2-8” wide flange I beams; reinforcement for metal studs; H beams; various size I beams…

SHOP TOOLS-TOOLSCentral Machinery 12” disc sander; Wilton oscillating spindle sander; 2-10” Sears craftsman radial saws; DeWalt 12” plane; 8” jointer; 10” table saw w/extensions; dual saw double bladed; craftsman 8” radial arm saw; Craftsman 8” miter saw; 2 in 1 contractor series floor nail gun; tool shop biscuit jointer; Campbell Hausfield air stapler; tool shop sabre saw; 4” hand planer; craftsman router; bits; tool shop detail sander; craftsman 4” belt sander; quick grip bar clamps; 1900’s post drill press; tooling tools; mill & drill bits; c-clamps; craftsman ban saws; Craftsman stack-able tool box; sockets; many hand tools; several air tools including: impact, rivets, pop guns, ratchet, air saws, air flow drills, chip & hammer, grinders w/wheels; low buck pipe notcher; sand blaster; skid of sand blast sand; Garco airless paint sprayer; Micrometers 1” to 16”; Interlaken bender; Calipers; Dial indicators; 10-ton Port-a-power; ¾ Milwaukee magnetic drill; Milwaukee power tools…

MISCELLEOUSLife size metal moose; 3 rolls chain link fence; 100 gal. air tank; electric motors; lots of misc. hardware; 2 detour signs; drop wire; heavy duty castors; trailer parts; chain binders; industrial shelving; concrete blocks; 4” drain hose; 1 ¼ water lines; 2 driveway tubes; 30 ft. telephone poles; 6,000 lb. & 1500 lb. axles; 275 gal. Fuel tank; 330 gal plastic totes; approx. 30 5-gal. buckets of asphalt; metal shop stools; steel tables on casters; Poulan chain saws; weed eater blower; Troy Bilt 4 cycle weed eater; 28ft Werner extension ladder; shooting gallery; tool cabinets; out house; 1800 barn beam; Huskee lawn sweep; wheel barrow; winches; trailer hitches & balls; hitch extender; R22 tanks; log tongs; aluminum carousel horse; advertising gas cans including:t Marathon, mobile; Martin & Sinclair; red & white oak ruffed sawed lumber; stainless steel freezer/refrigerator chest; wooden crates; bird houses; wooden office desk; office chairs…TERMS: Cash, Good check, with proper I.D. Credit Cards w/3% fee. Announcements made day of Auction take precedence over printed matter. Not responsible for accidents or articles after sold. All items sold “as-is”.

LESTINSKY AUCTION SERVICEwww.LestinskyAuctions.com

Jim Lestinsky: 219.608.9615Travis Lestinsky: 219.608.8985

AU19300140

PUBLIC AUCTIONUnder the authority in Internal Revenue Code section 6331, the property described below has been seized for nonpayment of internal revenue taxes due from Taxpayer. The property will be sold at public auction as provided by Internal Revenue Code section 6335 and related regulations.

Wednesday, April 11th • 11:00 A.M.SALE LOCATION: 10134 FLORIDA BLVD.

BATON ROUGE, LA 70895Only the right, title, and interest of Taxpayer in and to the property will be offered for sale. If requested, the Internal Revenue Service will furnish information about possible encumbrances, which may be useful in determining the value of the interest being sold.

• STAGE PRODUCTION MACHINERY, EQUIPMENT AND SUPPLIES.

• MINIMUM BID $19,107.00• MAIL IN BIDS ARE NOT ACCEPTED

The complete auction list may be viewed at www.irsauctions.govOpen House :Wednesday, March 28th • 10:00a.m. - 2:00 p.m. at Sale Location

Electrical cables various lengths and power supply panels • misc lot of electric chain hoists various capacities approx 22 (Columbus McKinnon Corp.) • Tool chest with tools • 3-Sajonberg SC-800 hoist control panels • ETC 96K censor rack touring pack SP Series • Misc lot including MAC 2000 lights, test rack and supplies • Misc lot of electric chain hoist various capacities approx 16 (Columbus McKinnon) • Genie Super Tower ST25 • Campbell Hausfeld air compressor 80 gallon 7.5 HP • Misc lot of platforms and plywood deckings • Genie AWP 305 manlift • Kalmar AC Forklift -model C-50 gasoline powered • Misc lot of aluminum columns (various sizes), pedistals, stage stairs, rolling platforms, refrigerator dolly, Aqaufog 3300, cables, span sets, etc. • Spotlight operator chairs (apporx 4), safety cable sets (appox 9) and cable ladders • Lycian Model 1271 Starklite with power supply, & much more!

Do You Want To Be A Marketing

SUPER HERO?

CAN HELP!

CALL: 800-203-9960for information on what we can do to

help your business succeed!

www.myequipauctions.com • March 26,, 2018 • 3

PUBLIC AUCTIONSATURDAY, APRIL 14TH • 10 AM

Phone: 785-243-8775gpaskren@twinvalley.nethttp://kansasauctions.net/5a/

Vehicles & Tractor & Boat, Power & Woodworking Tools,

Tools & Shop Items, Misc. Items

SALE LOCATION: Across the street north of Clyde Home Town Lumber. Turn north 1 block

at the corner of Grant & Washington St. in CLYDE, KANSAS.

WATCH FOR SIGNS.

MACHINERY WANTED!POCAHONTAS CONSIGNMENT AUCTION

Winegarden Auctioneering, LLC

Located: 401 1/2 East Elm • Pocahontas, IA

ATTENTION

The Sale Barn Office: 712-335-3117Rick & Kendra Winegarden: 712-358-0974 Lot Manager/Auctioneer: Jim Malecek 712-358-2754Lot Attendant/Auctioneer: Chad Lynch 515-890-9835salebarn.ncn.net • salebarn@evertek.net

Wednesday, April 11th • 9:00 AM

WE ARE NOW PREPARING THE LISTING FOR THIS UPCOMING SALE.

WE NEED: EQUIPMENT OF ALL TYPES, ESPECIALLYTRACTORS, SKIDLOADERS, COMBINES, HEADS, PLANTERS,

SPRAYERS, SPRING & FALL TILLAGE EQUIPMENT. CONSTRUCTION EQUIPMENT, SEMI’S & SEMI TRAILERS

PLUS OTHER MISC. FARM RELATED ITEMS!ADVERTISING DEADLINE: MONDAY, MARCH 26TH • 12 NOON

LIVE WEBCAST AUCTIONSALE DATE10AM ETAPR 17Sale Date: Tuesday, April 17, 10:00 AM ETLocation: 1296 S. Service Rd. W. Oakville (Toronto Area), Ontario 6L6 5T7Inspection: Monday, April 16, from 8:30 AM to 4:30 PM ET

www.perfectionindustrial.com

FEATURING: PROMA 3PU 21-Stand 48" Complete Rollforming Line; (2) 22-Stand 48" Rollformers w/30,000 Lb Uncoiler/Coil Car; 15-Stand Rollformer w/10,000 Lb Uncoiler, Product Line Tooling; (2) KONE 15-Ton x 73' Bridge Cranes; (1) w/Power Coil Rotator; 30,000 Lb Coil Up-Ender, Additional Uncoilers/Coil Cars; Machine Shop; (6) Forklifts up to 14,450 Lb Capacity; Shunt Tractor; Manlift; Factory Support Equipment; Fall Restraint Systems; Floor Scrubbers; O�ce Equipment; Furniture & More

Auction Contact: Jennifer Reiner | +1 847.545.6374 jennifer@perfectionindustrial.com

����������������������������������������

A Quality Metal Roofing & Panel Manufacturer

Surplus Assets to theOngoing Operations of

COMPLETE LINE

Sale Held in Conjunction With:

(2) AVAILABLE

4 • March 26, 2018 • www.myequipauctions.com

AUCTION CALENDAR

rabin.comSee it all now at...

MATERIAL HANDLING EQUIPMENT

COMPLETE CRAFT BREWERY

R&D, DEVELOPMENT & TESTING LAB

CANDY PEANUT FACILITY

CAN MAKING LINES & MACHINERY

JUICE BLENDING & PACKAGINGAPR 4

APR 17

APR 19

APR 26

APR 26

MAY 31

(2) VONS Distribution Centers

Auction conducted by TCL Asset Group

Black Diamond Brewing

Graftech International

Old Dominion Peanut Co.

Nampak’s Bevcan Operations

Frozen Concentrate Canning Line • Liquid Packaging Lines • Stainless Tanks, Pumps & Pipework • Material Handling Machinery • Plant Support Equipment

Over (200) Forklifts, Reach Trucks, Electric Pallet Jacks & Material Handling Equipment • Maintenance Machinery & Cafeteria Equipment & Much More.

Grain Handling & Milling Equipment • Brewhouse • 12 oz & 24 oz Bottling Line • Keg Cleaning & Filling Machinery • UV Disinfection System & More

Research & Development Lab • Scanners, Analyzers & Test Systems • Lab Mixers, Presses, Coater & Sealers • Lab Furnishings & Other Instruments

Peanut Brittle Production Line • Canning & Bagging Departments • Chocolate Enrobing & Panning • Packaging • Support & Facility Equipment

Complete 2 Piece Beverage Can Line Producing 211/202 x 408 Metal Cans - Approximately 480 Million Annually • Plus Additional Production Equipment

TorontoCanada

Los Angeles

Concord CA

Brooklyn Heights, OH

Norfolk VA

South Africa

+1.415.522.5700 Email: info@rabin.com

www.myequipauctions.com • March 26,, 2018 • 5

http://www.industrialmachinetrader.com/auctions/upcominghttp://www.industrialmachinetrader.com/auctions/upcoming

Auction Calendar

Click Here to Visit the