MY PORTFOLIO

Industrial & Graphic Designer

Resting place for the bag after brewing

The spoon is used to add sugar if wanted. Ends up on the floor occasionally since it wobbles on the saucer along with the cup.After the tea is brewed it is often used as

a tong to get the last drops of tea out with the help of the tea string and fingers.

From 27 people observed at Gallery Espresso 9 had to fish the string out of the hot water.

The label adds weight and prevents the string to fall in the

hot water, but from those 27 teas only 12 had the label when they

were served.

The ProblemDrinking tea requires FOUR SEPARATE items

11

2

2

3

3

4

4

3 1/4 - 3 3/4

6 3/4 - 8 3/4

43 1/4

?

Existing productsThey each address one or two problems but not all of the ones found in tea drinking

PROS

CONS

There is no direct contact when squeezing the tea after brewed

Doesn’t solve the string, or transportation problem and it is adding one more item to it.

PROS

CONS

Anchores the tea string to the cupsimple and elegant.

Doesn’t solve the transportationissue, not adaptable you need touse only this cup.

Attaches the string to the cup and works as a tong to squeezethe last tea drops.Doesn’t solve the transportationissue, when squeezing the tea bagyou do get water on your fingers.

Attaches the string to the cup Looks fun and clever.

Only works on when buying thatbrand, doesn’t target any trans-portation issue.

Attaches the string to the spoon

Spoon is not attached to thecup, makes transportationeven harder, you need to squeezethe tea bag the traditional way.

Attaches the string to the cup to prevent from falling in the hot water.

Doesn’t solve the transportation ofthe spoon problem, it is bulky and you do not need two to attach one bag.

Prevents string from falling in thehot water, no direct contact when squeezing the tea after brewing.Metal alterates the flavor of the tea, it can’t be used as a spoon,doesn’t solve transportation.

Attaches the string to the cup, nodirect contact when squeezing the tea after brewing.Doesnt’ solve transportation and it’s big and bulky.

ACCESORY LINE

CB2 Mission Pillow

CB2 is a modern destination from Crate and Barrel that first opened in Chicago in the year 2000.

The ClientDesigning for CB2 stores

Who they are & where they stand

MODERN

categories

AFFORDABLE

COMMUNITY

CLEVER

DETAILS

SHARING

FUN

DINING LINE

POSITIONING OFTHE TEA BAG HOLDER

outdoorfurniturelighting

accesoriesrugs/pillowsdining

officestorage

bed/bathnovogratz

gifts

3.1 inch tall to fit any cup.

Ideation

The SolutionAttaching all the items to the cup for easier transportation

Metal stampingStainless steel spoon

Injection moldingNylon tag / tong

Over moldingSilicone holder

Making it easier to identify your cup ona tea party.

Comes in sets of 6 different colors

With a swift turn of the tea spoonthe holder becomes a tong tosqueeze the last drops of tea without using your hands.

Double spoon support on holder

Research AnalysisMain issues to consider when designing a stroller

Sense of security

StorageSpace

Retractable

Wheels

HandlesAdjustable handlesfor different heights

Feet should neverhit the parent’s feet

Easy to fold and unfold.

A place to put thediaper bag

Lightweight

Sun & Rain Hood

PARENT

BABY

TouchTextures

Colors

Increases when feeling boundaries around them

Playing

Sound

To place them facing theparent in the stroller

Sight

ERGONOMICS

SpineDevelopment

Stress fromlaying horizontally

PhysicalNeeds

EmotionalNeeds

At birth the spine of an infant is C-shaped

Can be a major contributing factor inner ear infections in infants.

First Several Months strong neck muscles help an infant hold up their head.

Six Months - up the lower back curve and his muscles develop so that he can stand upright.

Laying infants flat on their back stretches the c-curved spine into a straight line, against their natural shape.

Laying flat can stress the baby’s skull, decrease muscle tone, and be stressful on their hips and spine.

Boy

Girl

Male

Female

Safety&

Transportation

NEEDEDfeatures

Anthropometrics

Age 20 and over

HEIGHT

Measurements in cm and kg

150.7 162.7 169.9WEIGHT 56.1 70.7 101.8

HEIGHT 168.4 176.3 186

Sylvia cares for her comfort and her baby’ safety when it comes to picking a stroller. She is a modern

and working mom who spends most of her day inthe car; so easy transportation is key, specially

with her baby’s items.

“ I am a mom first and then a woman...”

WEIGHT 62.2 85.6 111.5

50th 95th5th

Percentile

From birth - 8 months

HEIGHT 45.68 - 74WEIGHT 3.2 - 8.2 5.4 - 10

HEIGHT 45.81 - 128WEIGHT 3.5 - 8.4 6 - 9.9

50th 95th5th

TargetFor babies under 8 monthsFor parents of babies under 8 months

PersonasSylvia Hunter36 years oldmother of 2

William is a happy and outgoing baby that is veryattached to his mom. His dad works, but spends

a lot of time taking care of the kids. On week daysit is mom who pushes William’s stroller, but onweekends when dad is there, he is the one in

charge of little William.

New spaces and experiences put William understress, this is why his parents always put him in hisstroller facing them and little William gains instant

confidence. A safe baby, is a happy baby.

William Douglas3.5 months old

the youngest of 2

The ConceptIdeation, Design, Ergonomics, Mechanisms...

Ideation Color proposals

Front View Side View

Top View

Retractable StructureEasy to foldand unfold

The seat of the stroller becomes the car seat andthe structure completely folds to store while not

using and easily unfolds when needed again.

Folding pieceHinge (mechanism)Scale 1:6mm.By pulling the stopper that keeps the structure unfolded, the top tube fallsand the hinge allows it to easy transportand store the stroller.

The top snaps out when taking the seatoff the stroller.


Top View

Folding Mechanism

Stearing Mechanism

Exploded views

Research AnalysisTypes of research and what to consider when designing for kids

Design Briefing

Passive observationContextualResearchON-SITE

Designer’sKnowledge

OnlineResearch 3rd Person

PerspectiveInterviews

Redesigning a playground in Chacao, Caracas, Venezuela.The project consisted in redesigning an existing playground to make a more interesting one. It had to have at least three different games or playground stations.

The social area at the existing site is bigger than the actual playground area.The fountain provides water for the whole playground, including the water fountains.Behind the fountain there is a back room where the filter, motors and pumps for the fountains and plaza are located.The ages of the kids who come and play frequently at the part are between 3 and 10 years old.

Av. Mohedano, frente a la plaza Bolivar de Chaco, Urb. Poblacion Chacao

Current playground

Kids favorite play station

What adults want

Survey Analysis

SafetyBenches

PalmTrees

KeepFountain

SwingsSlide See-Saw

The area is 24.84m long by 9.30m weight andit is currently supplied with two small woodenplay stations. It is not close to been enough for the amount of kids that come on a daily base to the park.

Where the play stations are the floor is sand,when it rains it becomes a real issue becauseof the puddle formation (specially at the endof the slide and the swings)

The park has two good size trash cans, but they are located too close to the where thekids play. Finally there is not enough roombetween the wall and the wooden playgroundfor the kids to play without hitting themselvesagainst the walls.

ORIGINALPLAYGROUND

Trash Can

Fountain

Bench

24.84

6.3

Light Post

ORIGINALPLAYGROUND

Chacao

Area: 208.32 m2

100 people on site (64 kids and 36 adults)

Parque Justicia y Paz

Area to redesign

TargetFor kids from 5-12 and their parents

Anthropometrics

AGE AGE KIDS

5 5

6

7

8

9

10

11

12

1

2

9

15

9

19

5

4

5

6

6

7

7

8

8

HEIGHT

Measurements in cm and kgKid’s population

Numbers taken from passive observation

112.2WEIGHT 20.5

HEIGHT 114.4WEIGHT 22.1







Mean AGE

9

9

10

10

11

11

12

12









Mean

64

SafetyLaws and regulations

OTHER

SlideSee-Saw

CANNOT be higher than 2.5mAccess by ladder, platform...

A

A Starting or access sectionB Sliding sectionC Exit section

Starting sections needs to be AT LEAST 350mm long and with a 0-5 degree angle.MANDATORY railings if there is a fall higherthan 1m.There has to be a free 2.5 m space after the exit section of the slide.

There HAS to be at least 230mm free spacefrom point 1 to ground The highest point 2 can get is 1.5mCANNOT reach a greater angle than 32°Maximun range of movement 600mm.Has to have hand support and they are reco-mmended to be 30mm top.

The handles of a playground should notbe thicker or wider than 45mm.The floor of the playground needs to be soft and absorb impact.There can be any aggressive corners that could cut of injure the kid.Any entrance or open tunnel needs to be bigger than 500mm.Any transversal section should not bebigger tha 60mm.

THERE HAS TO BE A MINIMUN DISTANCE OF 1.5m BETWEEN ALL ELEMENTS OR AREAS IN THE PLAYGROUND.

B

C 1

2

The proposalA playground actually design for kids and by kids requests

1m

100% of the adults in thesurvey said they “loved”

the fountain and thewater sounds.

Therefore the fountainis kept in the new

proposal.

Supplied with fun seats withdifferent heights for both parents and smaller kids.Located at the entrance ofthe park to make sure the kidsdo not run to the busy street.

Leads to Av. Mohedanoa busy street in Chacao.

Fountain

3 different stations & 4 play areas: 1 slide, 3 see-saws and 6 climbers

Parent’s area

Floor Lamps

Open Gate

Slide

Climber

Climber

See-saw

Slide


Top View

See-Saw

Exploded View


Top View

Designed to make a fun station for a veryreduced space. Kids will sit and climb, to make this game even more interesting it wasmade into a group game, where 3 kids willrace against each other to the top.


Cut C-D

Exploded view

Mechanism

Top View

Climber

Front & Side View

Top View Front View Side View

Exploded view

Top View

Totems and trash can

Pushed away from the play stations

Design Briefing

Competition

To design the brand for a food store or company, I chose an organic juice store.Design the logo, uniform, transportationand packaging and it has to be presentedas a Corporate Identity Manual displayed as posters on 3 mdf boards.

Preliminary ResearchExisting products and companies with similar characteristics as the design briefing

Selected

Final

Ideation

Alimentos orgánicos C.A.



Construction

Logo & Application

Ingredientes: Concentrado de piña orgánica, fuctosa (ázucar de frutas) y ácido cítrico.

uva:Una de las enzimas más importantes de piñas es bromelaína y lleva a cabo un papel muy importante para la buena salud. La Piña fresca está llena de estos compuestos con azufre, pro-teinicos digestivos.Se ha encontrado que la a bromelaína es un

cción de la hinchazón y la ayuda al tratamiento de condiciones tales como sinusitis aguda, gar-ganta dolorida, artritis y gota. La piña es también una fuente e xcelente de manganeso, un mineral esencial en algunas de las enzimas necesarias en el cuerpo para la pro-ducción energética. También tiene cantidades muy buenas de tiamina (vitamina B1) que sea también importante en estas enzimas de la pro-ducción de energía.


Naranja:Una de las enzimas más importantes de piñas es bromelaína y lleva a cabo un papel muy importante para la buena salud. La Piña fresca está llena de estos compuestos con azufre, pro-teinicos digestivos.Se ha encontrado que la a bromelaína es un



Patilla:Una de las enzimas más importantes de piñas es bromelaína y lleva a cabo un papel muy importante para la buena salud. La Piña fresca está llena de estos compuestos con azufre, pro-teinicos digestivos.Se ha encontrado que la a bromelaína es un



Manzana:Una de las enzimas más importantes de piñas es bromelaína y lleva a cabo un papel muy importante para la buena salud. La Piña fresca está llena de estos compuestos con azufre, pro-teinicos digestivos.Se ha encontrado que la a bromelaína es un


X1/4 X

X

X

Brand Book

(305) 333-3296

[email protected]/anae.oropezad.anaoropeza.prosite.com

MY PORTFOLIO

Documents

Transcript of MY PORTFOLIO