Municipal Solid Waste management_Eco Health Center
Transcript of Municipal Solid Waste management_Eco Health Center
Sustainable Solution to Municipal Solid Waste (MSW)
MSW & Open Questions
• How do we handle Mixed Nature of Waste?
• What do we do when Plastic is present in the Waste we receive ?
• How to address Environmental Pollution?
• How to manage land for Continuous Waste Dumping?
Can we re-cycle 100% of MSW ?Do we have a process with no Environment issue ?
MSW Recycling & Challenges
• Segregation of mixed waste
• Ever increasing menace of Leachate
• No More Dump Yards available
• Public Protest against most of the Public dump yards due to environmental issues
• Lack of sustainable technical Know-How
• Poor success rate of multiple projects across the country
• Inadequate research and experiments in waste handling & recycling
Eco-Health Centre (E.H.C )- Concept visualized by Sun Tech Industrial Steel Company (SITSCO) along with its consulting wing, BeStar Consulting, Bangalore.
SITSCO is a high-tech enterprise specializing in engineering research & development , since last two decades.
EHC has been innovated after an extensive research and fine turning since 15 years
About E.H.C
Commercial Concept Plant of EHC is operational since last 3 years and already undertaken the Recycling of2500+ Tone of
Mixed Solid Waste
Core Modules
Core Modules consist of :Plastic Separator Bio-Gas Plant Manure processing plant
Scientific Bio-Gas Plant
Bio degradable Slurry will be moved to this module for separating Bio-Methane
This also prevent the foul ordering at site. Bio-Manure for Eco-Farming helps to stay away from Chemical Fertilizer
Optional Modules-Details:
a. Plastic Film Crunching Module: This module is mandatory for processing the waste plastic from MSW. It is used for size reduction of plastic bags separated from the MSW for further processing like using for re-in forcing the Cement & Tar for road tarring.
b. Solid Strip - Casting Module:This module is to convert the separated plastic in to Hard Bars in appropriate size for industrial & Domestic use as per the commercial requirement.
c. Tar- Mixing Module:This is to mix this plastics with Tar for road tarring and the municipality/corporation can use it as much as 30% of plastic (form the waste) and it improves the life of the road.
d. Concrete- Mixing Module: This is to mix this plastics with Concrete for Flore tiles and the municipality/ corporation can use as much as 20% of plastic in concrete. This will re-in force the tiles by 40% extra strength
Dried Bio-Manure
Bio degradable Slurry is collected at slurry tank of APSM
The slurry is converted into bio manure of industrial standards after aerobic/ anaerobic digestion, fine grinding and cleaning.
Why EHC ?
• Proven Ecofriendly & Sustainable Solution
• 100% Recycling solution for Mixed Waste• Mechanical segregation of Mixed waste into bio
degradable and non- degradable waste• Permanent solution to the menace of leachate
• Highest rate of conversion of fresh MSW into compost
• Complete Operation Success Commitment - 100% inline with MSW Rule 2000 (M&H).
• Value added Eco-friendly Products
Most Cost-effective solution as EHC will provide the Machinery and
Operation as part of O&M contract
How EHC Works
The Green Automated Plastic Separation Module
(APSM) separates the fresh garbage into Bio-Degradable and non-bio degradable.
The Bio degradable materials are crushed to make slurry of it, which is further allowed to degenerate in natural way. This process ensures that no foul smell is generated in the whole process.
Non bio-degradable particles-Mainly plastic- is separated by APSM.This allows recovery of plastic in reusable form.
Since the rejects are 100% free of biological particles, the chances of generation of leachate at landfill is practically nil.
The leachate generated at the feeding point is reused in the process. By this it is ensured that no leachate is released out of the plant. This approach solves the issue of leachate generation which the gravest issue in the present process.
The bio degradable slurry is ideal to be fed into bio gas plants. This allows generation of electricity out of waste.
How EHC Works (Cont..)
• 2 Phase Waste Separation
• 3 Stage Processing
• Separated Bio- degradable waste is composting as per Municipal Solid waste Rule 2000 (M&A)
• 99.5 % Certified plastic free Bio-Manure
Certified by Govt: bodies DGS & D and Bureau of Indian Standards
Salient features
• Recycling 99.5 % MSW #• 100% Natural Solution for “Plastic Waste” –
Converts it in to multiple useful products
• NO harmful burning process like Incineration & RDF
• No environmental issues around the plant
# Balance .5 % will be used as fire fuel used for heating
• Bio-Gas (Methane) extraction from waste – Reduce order at site and also insects due to it.
• Protect the environment from greenhouse effect
• This enable to build the plant, even in residential areas
Salient features …
Qualify to achieve carbon Credit and International aids for the project
Started in a Municipality on Public private partnership
Undertaken the MSW recycling contract, since last 4+ years.
Successfully delivered the service of recycling 2500+ Tons of Waste
Case Study-Kodungallur, Kerala
Good Bye to Dumping Yard !! No Landfill !!
EHC- Kodungallur Municipality PlantFirst in the Country with 100% of M.S.W - Mechanically Recycled
Present Model of Windrow composting
Effective conversion rate into compost- 8- 10%
Process time- Minimum 22 days- 21 days for decaying and 1 day for turning in the windrow machine.
Addition of EM solution Generates leachate through out the year,
causing high environmental costRequire land filling.
Comparison
Vs
Windrow shredding/compos
tingEHC
Windrow Model EHC Model
Garbage water Not Treated Gets treatedAddition of process stimulator (EM) yes NoFoul Smell Yes Very Minimal
Land fill Yes
No (In case of complete module only)
Eligibility for assistance from CDM No Yes
Leachate generation Yes No
Process Comparison
Terms of sale-APMS
Plant Capacity
Base Price in INR Lakh*
1 Ton/Hour 282 Ton/Hour 353 Ton/Hour 424 Ton/Hour 495 Ton/Hour 55• The price quoted is exclusive of Taxes
applicable.• Price quoted is that of machine made of
mild steel• Stainless Steel model (Fe304 Grade)
costs 150% more than the rate quoted above
Compulsory Annual Maintenance Contract(AMC) for 10 years
AMC amount- 10% of base price of machine for mild steel model and 5% of the base price for Stainless steel model
Terms of Sale Contd….
For queries and trade Enquiries Contact
Amal.KPh:+91-8277022808E-Mail: [email protected]