Multiply Your Surveying Possibilities - WELCOME TO … · Reflectorless Measurement Range New...
Transcript of Multiply Your Surveying Possibilities - WELCOME TO … · Reflectorless Measurement Range New...
POSITIONING INSTRUMENTS
CATALOG 2011
M ul t ip l y Yo u r S u r v e y ing P o s s ib i l i t i e s
2
SRXFlagship Total Stations SRX1X/SRX2X/SRX3X/SRX5XNew Auto-Tracking Technology New Motor Drive Mechanism1000m (3280ft) Reflectorless Measurement
SRX
The New SRX Features Innovative Auto-Tracking and EDM Technologies that Maximize the Robotic Surveying Capability
Extremely Robust Auto-TrackingThe new SRX total stations feature cutting-edge laser technology, optimized optical design, newly-developed motor drive mechanism, and further refined tracking algorithm, to achieve extremely robust Auto-Tracking capability. The new SRX constantly tracks a moving prism even in strong backlight or with repetitive interruptions in the line-of-sight, dramatically reducing possibility of losing a prism lock. Even if the lock is lost, the advanced on-demand remote control system allows the SRX to instantly recover the prism lock, ensuring increased productivity in all robotic surveying and setting-out tasks.
USBWIN-CE
Measuring beam spot size (reflectorless mode)
Distance 10m (33ft.) 40m (131ft.) 100m (328ft.)
Beam spot size(height x width)
7 x 9mm(0.28 x 0.35in.)
14 x 14mm(0.55 x 0.55in.)
29 x 24mm(1.14 x 0.95in.)
1,000m (3,280ft.) Reflectorless Measurement RangeNew RED-tech 800 EDM provides increased accuracy and range in distance measurements with or without reflectors, incorporating the new optical design, the enhanced signal processing algorithm, as well as the ultra-high signal modulation frequencies of up to 468.75MHz. The RED-tech 800 provides measurement accuracy of 1.5mm + 2ppm with 360° prisms or standard prisms, and 2mm + 2ppm without a reflector. It measures up to 6,000m (19,680ft.) distance with a single prism, and up to 800m (2,620ft.) without a reflector. The reflectorless measurements of up to 1,000m (3,280ft.) range is possible when the brightness at object surface is 500 lux or less, regardless of ambient brightness conditions.
SRX1X
3
RC-PR4 RC-Controller• The RC-PR4 RC-Controller further enhances the SRX system. • The RC-PR4 consists of a search beam emitter, directional sensor
and Bluetooth wireless modem.
Tota
l Sta
tions
SRX1X SRX2X SRX3X SRX5X
Measuring range(Average conditions) Reflectorless*1 0.3 to 800m (1 to 2,620ft.) / 0.3 to 1,000m (1 to 3,280ft.)*2
With reflective sheet target 1.3 to 500m (4.3 to 1,640ft.) with RS90N-K (90x90mm) reflective sheet
With ATP1(S) 360° Prism 1.3 to 1,000m (4.3 to 3,280ft.)
With 1 AP prism 1.3 to 5,000m (4.3 to 16,400ft.) / to 6,000m (to 19,680ft.) under good conditions
Distance accuracy(ISO17123-4:2001) Reflectorless*1
(2 + 2ppm x D)mm : 0.3 < D < 200m (1 < D < 650ft.)
(5 + 10ppm x D)mm : 200 < D < 350m (650<D < 1,140ft.)
(10 + 10ppm x D)mm : 350 < D < 1,000m (1,140<D < 3,280ft.)
With reflective sheet target (2 + 2ppm x D)mm
With prism (1.5 + 2ppm x D)mm
Angle display resolutions (selectable) Degree 0.5" / 1" 1" / 5"
Gon 0.0001 / 0.0002gon 0.0002 / 0.001gon
Mil 0.002 / 0.005mil 0.005 / 0.02mil
Angle accuracy(ISO17123-3:2001) H&V 1" / 0.3mgon / 0.005mil 2" / 0.6mgon / 0.01mil 3" / 1mgon / 0.015mil 5" / 1.5mgon / 0.025mil
Auto-Tracking range / Auto-Pointing range
With AP Prism 1,000m (3,280ft.)
With ATP1(S) 360° Prism 600m (1,960ft.)
*1 Kodak Gray Card white side (90% reflective). Reflectorless range/accuracy may vary according to measuring objects, observation situations and environmental conditions.*2 When brightness at object surface is 500 lux or less, regardless of ambient brightness conditions.
ATP1/ATP1SMost Versatile and Accurate Prism System• The high-precision 360° prisms can be mounted at either the
top or bottom of a range pole.• The new, compact 360° Sliding Prism ATP1S slides along the
Pin Pole PP2 to enable quick adjustment of a prism height. • In combination with a pin pole, prism height can be set as low
as 10cm (4in.). The lower prism height improves measurement accuracy by minimizing error caused by tilt of a pole.
ATP1 ATP1S
RC-PR4
Range*1 (slope distance) 2 to 300m (7 to 980ft.)*2
*1 Good conditions. *2 When the height difference between total station and RC-PR4 is within 20m (66ft.).
= =
=
= =
= =
=
4
USBWIN-CE
SET X
The SET X offers the highest in environmental protection IP65 for Windows CE total stations. Furthermore, the SET X maintains its IP65 rating even with the external battery or serial cable connected.
• RED-tech EX EDM uses an ultra-narrow laser beam for reflectorless measurement to ensure pinpoint accuracy. It measures from the industry's shortest distance of 30cm (1ft.) to 500m (1,640ft.).
• Using a single AP prism, it measures distances up to 6,000m (19,680ft.) and 500m (1,640ft.) using reflective sheet targets.
• The unique absolute encoders provide reliable angle measurement. SET1X and SET2X employ the innovative IACS (Independent Angle Calibration System) technology to ensure lifetime dependability.
• The finely balanced trigger key and fine motion screws allow quick sighting and measurement.
Windows CE Reflectorless Total StationsSET1X/SET2X/SET3X/SET5X
SOKKIA CLASSICThe SET X total station is a blend of traditional and advanced engineering. Featuring the latest key technologies, the SET X succeeds in delivering reliability and long-lasting precision.
• License-free Class 1 Bluetooth modem is equipped as standard for wireless communications up to 200m (650ft.).
• Windows CE operating system makes it possible to choose your favorite data collection software.
• SET X has 1MB of internal memory, CF card slot and USB ports. An SD card can also be used with a CF-type adapter.
• The standard BDC58 battery provides power for 14 hours. An optional external battery BDC61 continuously supplies power for 38.5 hours.
Protection against ingress ofsolid foreign objects
Highest level: 6
Protection against ingress of water
Highest level: 8
7 levels: 0 to 6. X: unspecified.
9 levels: 0 to 8. X: unspecified.
Measuring beam spot size (reflectorless mode)
Distance 10m (33ft.) 40m (131ft.) 100m (328ft.)
Beam spot size(height x width)
7 x 9mm(0.28 x 0.35in.)
14 x 14mm(0.55 x 0.55in.)
29 x 24mm(1.14 x 0.95in.)
=
5
*1 With Kodak Gray Card white side (90% reflective).
SET1X SET2X SET3X SET5X
Measuring range(Average conditions)
Reflectorless*1 0.3 to 500m (1 to 1,640ft.)
With reflective sheet target 1.3 to 500m (4.3 to 1,640ft.) with RS90N-K (90x90mm) reflective sheet
With 1 AP prism 1.3 to 5,000m (4.3 to 16,400ft.) / 1.3 < 6,000m (4.3 < 19,680ft.) under good conditions
Distance accuracy(ISO17123-4:2001)
Reflectorless*1 (3 + 2ppm x D)mm : 0.3 < D < 200m (1 < D < 650ft.)
With reflective sheet target (3 + 2ppm x D)mm
With CPS12 high precision prism (1.5 + 2ppm x D)mm —
With prism (2 + 2ppm x D)mm
Angle display resolutions(selectable)
Degree 0.5" / 1" 1" / 5"
Gon 0.0001 / 0.0002gon 0.0002 / 0.001gon
Mil 0.002 / 0.005mil 0.005 / 0.02mil
Angle accuracy (ISO17123-3:2001)
H&V 1" / 0.3mgon / 0.005mil 2" / 0.6mgon / 0.01mil 3" / 1mgon / 0.015mil 5" / 1.5mgon / 0.025mil
Guide Light UnitThe standard Guide Light Unit assists setting-out measurements. Green and red lights are emitted from a single aperture to easily locate a prism on a line-of-sight in a range of 1.3 to 150m (4.3 to 1,640ft.).
Multiple Data InterfacesMultiple data interfaces provide seamless data handling and transmission for a variety of file types.
Weatherproof Multi PortSerial cable or external power can be connected to a single weatherproof port without compromising dust/water protection.
SFXUsing an internet-capable mobile phone or a CompactFlash modem, wireless data transfer can be performed between field and office.
Powerful Onboard SoftwareThe Sokkia data collection software is preinstalled as standard.
SRX and SET X Common Features
USB Type miniB Port
USB Type A Port
CompactFlash Card Slot
Tota
l Sta
tions
=
= == =
6
Reflectorless Total Stations
Featuring enhanced RED-tech II EDM, easy-to-operate alphanumeric keypad, powerful onboard software and market-proven reliability, the Series50RX sets a new standard for reflectorless total stations for all surveying and engineering applications.
• Enhanced RED-tech II EDM features wide reflectorless measuring range from 30cm to 400m.
• Ultra-narrow visible laser beam ensures pinpoint accuracy. The same beam is used as a laser pointer.
• Laser output level is automatically switched to Class 1 specifications in “prism” and “reflective sheet” modes to ensure safety.
• Innovative optics provides ideal light paths both for EDM and telescope.• Sokkia’s advanced coding and digital processing technologies have
given the Series50RX a capability to automatically detect and correct misreading of encoder patterns.
• The 2” model incorporates IACS (Independent Angle Calibration System) to further enhance measurement reliability.
• Fully backlit alphanumeric keys and customizable softkeys allow quick operation in any lighting conditions.
• An optional wireless keyboard SF14 maximizes the operation efficiency (except 6" model).
• Powerful onboard software.• In addition to the 10,000-point internal memory, data can be stored in
SD/SDHC cards and USB memory devices.• Password protection to prevent unauthorized use.• Green/red Guide Light is built into the telescope as a standard feature,
enhancing setting-out work efficiency in a range of 1.3 to 150m.• Complies with the highest in its class IP66 dust and water protection.• Internal Bluetooth module (option) is available for wireless connection
with a data collector.• Built-in laser plummet for quick instrument setting (factory option).• Optional large Ni-MH external batteries are available for 2” model and all
Low Temperature models.• Low Temperature models (2”/3”/5”) operate in broader temperature range
from -30°C to +50°C (-22°F to +122°F).• High Temperature models (2"/3"/5"/6") operate in the heat of up to +60°C
(+140°F) without compromising low temperature range of -20°C (-4°F).
Series50RXReflectorless Total StationsSET250RX/SET350RX/SET550RX/SET650RX
SET250RX SET350RX SET550RX SET650RX
Measuring range(Average conditions)
Reflectorless*1 0.3 to 400m (1 to 1,310ft.)
With reflective sheet target 1.3 to 500m (4.3 to 1,640ft.) with RS90N-K (90x90mm) reflective sheet
With 1 AP prism 1.3 to 4,000m (13,120ft.) / 1.3 to 5,000m (16,400ft.) under good conditions
Distance accuracy(ISO17123-4:2001)
Reflectorless*1 (3 + 2ppm x D)mm : 0.3 to 200m (1 to 650ft.)
With reflective sheet target (3 + 2ppm x D)mm
With prism (2 + 2ppm x D)mm
Angle display resolutions(selectable)
Degree 1" / 5"
Gon 0.0002 / 0.001gon
Mil 0.005 / 0.02mil
Angle accuracy(ISO17123-3:2001)
H&V2"
0.6mgon 0.01mil
3"1mgon
0.015mil
5"1.5mgon0.025mil
6"1.9mgon0.03mil
*1 With Kodak Gray Card white side (90% reflective).
USB
*1 *2
*1 Option for SET250RX/350RX/550RX
*2 Option for all models
+60˚C/+140˚F
SF14 wireless keyboard*1 SET350RX
Measuring beam spot size (reflectorless mode)
Distance 10m (33ft.) 40m (130ft.)
Beam spot size(height x width) 6.5 x 7mm(.26 x .28in.) 19 x 14mm(.75 x .55in.)
7
The Series50X total stations provide exceptionally dependable performance at affordable costs.
Extended measuring range, increased measurement speed, field-proven accuracy, all-weather dependability, easy-to-use powerful onboard software, and a variety of data management capabilities -- all the advanced features are packaged in a tough and compact body.
The Series50X – Ultimate Standard from Sokkia.
• High-speed, long range laser EDM• World-proven, time-tested angle reading system• Highest protection against dust and water• Quick operation in all conditions• Security and data management• Built-in laser plummet (option)• An optional built-in Bluetooth® module for wireless connection with a data collector
Series50XTotal StationsSET250X/SET350X/SET550X/SET650X
*1 Option for SET250X/350X/550X
*1
SET550X
Total Stations
SET250X SET350X SET550X SET650X
Measuring range(Average conditions)
With reflective sheet target 1.3 to 150m (4.3 to 490ft.) with RS90N-K (90x90mm) reflective sheet
With 1 AP prism 1.3 to 3,500m (4.3 to 11,480ft.) / 1.3 to 4,000m (13,120ft.) under good conditions
Distance accuracy(ISO17123-4:2001)
With reflective sheet target (3+2ppm x D)mm
With prism (2+2ppm x D)mm
Angle display resolutions(selectable)
Degree 1" / 5"
Gon 0.0002 / 0.001gon
Mil 0.005 / 0.02mil
Angle accuracy(ISO17123-3:2001) H&V 2" / 0.6mgon / 0.01mil 3" / 1mgon / 0.015mil 5" / 1.5mgon / 0.025mil 6" / 1.9mgon / 0.03mil
SF14 wireless keyboard*1
Reflectorless Total Station UnitSET1X SET2X SET3X SET5X
Measuring range(Average conditions)
Reflectorless*1 0.3 to 500m (1 to 1,640ft.)
With reflective sheet target 1.3 to 500m (4.3 to 1,640ft.) with RS90N-K (90x90mm) reflective sheet
With 1 AP prism 1.3 to 6,000m (4.3 to 19,680ft.)
Distance accuracy(ISO17123-4:2001)
Reflectorless*1 (3 + 2ppm x D)mm : 0.3 to 200m (1 to 650ft.)
With reflective sheet target (3 + 2ppm x D)mm
With prism (2 + 2ppm x D)mm
Angle display resolutions(selectable) Degree 0.5" / 1" 1" / 5"
Gon 0.0001 / 0.0002gon 0.0002 / 0.001gon
Mil 0.002 / 0.005mil 0.005 / 0.02mil
Angle Accuracy(ISO17123-3:2001)
H&V1"
0.3mgon0.005mil
2"0.6mgon 0.01mil
3"1mgon
0.015mil
5"1.5mgon0.025mil
*1 With Kodak Gray Card white side (90% reflective).
Gyro UnitAccuracy of azimuth determination(Standard deviation) ±20" (6mgon, 0.1mil)
Measuring time Approx. 20min.
Weight of gyro unit 3.8kg (8.4lb.)
Gyro StationLocate true north at any time regardless of visibility or weather conditions, even when working underground, and without the need of a reference station. A combination of the GP1 manual gyroscope and reflectorless total station SET X, the GYRO STATION locates true north and determines azimuth with a 20 arc-second (6mgon, 0.1mil) precision. The calculated azimuth is instantly set to the total station’s horizontal angle. The DLC1 3-key remote trigger facilitates Enter key operation during gyro measurement procedures. It also allows distance measurement to be triggered wirelessly.
GP3X
DLC1
Gyro Station
GP1X/GP2X/GP3X/GP5X
Tota
l Sta
tions
Reflective Prisms
Reflective Sheet Targets and Staves
Model
APS11-MAR
APS12-MAR
APS34-MAR
Description
Single tilting prism complete with WA100 tribrach
Single tilting prism complete with coaxial target and WA100 tribrach
Triple tilting prism complete with coaxial target and WA100 tribrach
Prism Sets with detachable tribrach
Range Pole Prisms Mini Prisms
Reflective StavesBRS55 Aluminum RAB-Code Reflective StaffThe BRS55 can be used for distance and height measurement with total stations, as well as for height measurement using SOKKIA digital levels.Front: metric graduation on reflective surface Reverse: RAB-Code 5.0m (16.7ft.), 5 sections, 1.95kg (4.3lb.), metric
2RT500-K Two-Point Target Two reflective targets attached on a narrow pole for 2-distance offset measurements of hidden points with all of the SOKKIA total stations.
RT90C-K Detachable Rotary Target A 90 x 90mm, fully rotatable reflective target to be used on tribrachs or prism poles.
RT50AP-K Reflective Sheet Target for AP Prism Mount A 50 x 50mm sheet target to be used with AP11 Single Tilting Mount of AP Series glass prism.
RT90C-K
2RT500-K
RT50AP-K
Model
RS10N-K
RS15N-K
RS20N-K
RS30N-K
Model
RS50N-K
RS70N-K
RS90N-K
RS00-K
Size (mm)
10 x 10
15 x 15
20 x 20
30 x 30
Size (mm)
50 x 50
70 x 70
90 x 90
230 x 230
Reflective Sheet Targets RS Series Reflective Sheets (self-adhesive type)
8
Tota
l Sta
tions
APS11 APS12 APS34
APS11P APS12P OR1PA+PUS2 OR1PA+PUS2
Data collectorThe SHC250 data collector incorporates the latest Windows Mobile® 6.5 and the Spectrum Survey Field software that fully controls Sokkia GPS/GNSS receivers and total stations with unsurpassed ease and speed.
• User-friendly intuitive operation fully utilizing the Windows Mobile 6.5 and large touch screen display.
• High-speed processor and large memory for maximum speed and productivity.
• Internal Bluetooth module.• IP66 dust/water protection.
9
Data collector
Data
colle
cto
r
SHC250
Data Collection SoftwareFast, powerful, yet user-friendly data collection software.
• Leveraging a large graphical display, the Spectrum Survey Field provides easy-to-use intuitive user interface that minimizes the learning curve.
• Maximizes the productivity in all kinds of surveying, construction setting out and GIS data collection tasks.
• Easily handles multiple surveying instruments using individual configuration files stored for each instrument.
• Superior data management and exchange capability in numerous file formats.
Spectrum Survey Field
OS Windows Mobile Version 6.5
Processor 806 MHz XScale processor
Memory 256 MB SDRAM / 1 GB flash memory
Display 3.7 in., VGA 640 x 480, sunlight-activeTFT color touch-screen display
Dust and water protection IP66 (IEC60529:2001)
Weight w/Battery 720g (1.6lb.)
USB
Data collectorThe advanced data collector SHC2500 integrates full alphanumeric keyboard and a wide array of features in a rugged waterproof body.
• Full 55 keys for the quickest input of attributes, coordinates and other features.
• High-speed processor and large memory for maximum speed and productivity.
• Internal Bluetooth module.• Hot swappable two batteries.• 5MP digital camera.• Rugged shock-proof body.
SHC2500
OS Windows CE.NET Version 5.0
Processor 624 MHz XScale processor
Memory 256 MB SDRAM / 2 GB flash memory
Display 3.5 in., QVGA 320 x 240, sunlight-activeTFT color touch-screen display
Dust and water protection IP67 (IEC60529:2001)
Weight w/Battery 1.1kg (2.3lb.)
Data collectorLightweight, ultra-compact body not only fits in your pocket, but also meets the military standard to withstand extremely rough conditions. The Sokkia SHC25/25A offers the affordable choice for surveying and GIS data collection applications.
• MIL-STD-810G Ruggedness• IP65 Dust/Water Protection• Integrated 20ch GPS Receiver• Built-in 3MP Camera, Compass, and Altimeter (SHC25A)• 2GB Flash Memory• WLAN / Bluetooth® Wireless
• Field-replaceable Li-ion Battery
SHC25/SHC25A
OS Windows Mobile version 6.5
Processor Samsung S3C2450, 533MHz
Memory 256MB SDRAM
Display 3.5 in., VGA 640 x 480, sunlight-active TFT color touch-screen display
Dust and water protection IP65 (IEC 60529:2001)
Weight w/Battery 320g (0.7lb.)
USB
SHC25
GRX1 GNSS ReceiverThe GRX1 brings a new level of versatility and flexibility into precision GNSS positioning applications. Whether it’s used for RTK base or rover, for network RTK rover or even as a static receiver, the GRX1 provides unmatched usability and convenience that increases field work efficiency on every job site.The GRX1 GNSS receiver fully integrates GPS+GLONASS receiver and antenna, digital UHF modem, GSM/GPRS module, Bluetooth module and detachable battery into a compact and rugged magnesium alloy body.
• Fully scalable architecture maximizes your return on investment. It allows you to start with an L1 GPS+GLONASS receiver with a minimal initial cost, which can be upgraded up to 72-channel L1/L2 GPS+GLONASS receiver at any time.
• 72 universal channels are available for GPS, GLONASS and SBAS signals tracking.
• Supports GPS L2C signals.• Triple wireless technologies: All of three commonly-used wireless
technologies can be integrated into GRX1 receiver. 1. Digital UHF Modem (Rx/Tx): for RTK base and rover 2. GSM/GPRS Module: for network RTK 3. Bluetooth Module: for controller and other PC (Class 1 long-
range specifications)* Internal “UHF modem” and “UHF+GSM/GPRS modem” are available as factory options.
Maximum Versatility in RTK ApplicationsUtilizing full wireless connectivity and the Sokkia-invented voice navigation system, the GRX1 dramatically facilitates the use of both RTK and network RTK technologies.
• Built-in GSM/GPRS modem makes the GRX1 an ideal rover receiver for network RTK positioning.
• The GRX1 can be used for both private RTK base and RTK rover using internal digital UHF modem without any extra device.
• Voice messages notify the users when RTK is fixed or lost, or other problems occur, eliminating a need for repeated checks with the controller display.
10
GNSS/GPS System
GN
SS/G
PS S
yste
m
Position accuracy RTK L1+L2 H:10mm + 1ppm, V:15mm + 1ppmStatic L1+L2
L1 onlyH:3mm + 0.5ppm, V:5mm + 0.5ppm H:3mm + 0.8ppm, V:4mm + 1ppm
DGPS <0.5mChannels 72 channelsMemory SD / SDHC cardWireless communication UHF radio*1 410-470MHz, receiver/transmitter
GSM*1 GSM/GPRS module
Bluetooth V.1.1, Class 1
Size Dia. 184 x H 95mm(Dia. 7.24 x 3.74 in.)
Dust and water protection IP67 (IEC60529:2001)Weight GRX1 receiver 1.1kg (2.43 lb.)
BDC58 battery 195g (6.9 oz.)
Internal modems 115 to 230g (4.1 to 8.2 oz.), depending on modem
*1 Internal "UHF modem" or "UHF+GSM modem" available as factory options.
11
MONMOS
MONMOS3D Coordinate Measuring SystemThe MONMOS handles large-scale 3D measurement tasks with unmatched ease and speed, allowing a single operator to instantly acquire precise 3D coordinate values.
MONMOS applications include: • Deformation/displacement monitoring of large structures.• Precise baseline management.• Tunnel, bridge, railroad and power plant constructions.• Manufacturing and maintenance of ships, vehicles, railcars and
aircrafts.
NET1AXAutomated 3D StationThe NET1AX incorporates longer range EDM and a laser beam emitter option designed for tunnelling and general construction applications.
1" angle accuracyLonger-range EDM
• 1mm + 1ppm precision up to 300m (980ft.) range with reflective sheets.
• Extended 400m (1,310ft.) reflectorless range with 2mm + 1ppm accuracy.
• The LSP1 optional laser beam emitter can be built into the telescope. The bright laser beam can be utilized for automatic profile projection on tunnel faces as well as various setting out tasks in underground constructions. Narrow parallel beam reaches up to 700m (2,300ft.).
NET05AX/NET1AX Common Features • Specialized Auto-Pointing algorithm enhances reliability of periodic
monitoring with predetermined prisms.• Constantly tracks a moving prism up to 90km/h at a distance of
100m (56mph at 320ft.).• Built-in target illumination for use in dim lighting conditions.• Robust IP64 dust/water protection.• Long-range Bluetooth module available as an option.
NET05AXAutomated 3D StationFeaturing 0.5" angle accuracy and sub-millimeter EDM, the NET05AX offers maximum precision in a broad range of applications.
0.5" angle accuracySub-millimeter EDM
• Sub-millimeter 0.5mm + 1ppm accuracy using reflective sheets within the range of 200m (650ft.).
• 0.8mm + 1ppm precision with standard prisms up to 3,500m (11,480ft.).
• Reflectorless measurement can be performed with 1mm + 1ppm precision up to 100m (320ft.).
• 0.01mm ultra-fine distance resolution for industrial measurement applications.
3D
Coord
inate
Measurin
g S
yste
m M
ON
MO
S
USB
WIN-CE
NET05AX
NET05AX/NET1AX New Features• 1” auto-pointing accuracy with a standard prism.• Enlarged 3.7 inch LCD with automatic brightness control.• Reflector Prescan* can be used to quickly locate target positions,
dramatically reducing initial setup time for structural monitoring.• Rapid 2D Monitoring* enables fast recognition of vertical and
horizontal movements of targets for real-time subsidence monitoring and alarming applications.
* Available when operating the NET via command operation from an external PC or other devices.
12
NET12003D StationCompact and lightweight body provides maximum mobility, making theNET1200 easy to carry around large-scale sites or in a number of different plants.
• 1" angle accuracy.• 0.6mm + 1ppm precision with reflective sheets in a range of up to
200m (650ft.).• IP66 industry's highest dust/water protection.• Class2 Bluetooth option for wireless connection with control
terminal or data collector.
Application Software for MONMOSContact your local SOKKIA representative for details.
MONMOS
NET05X3D StationEquipped with a variety of innovative features, the NET05X provides ideal solutions for the most demanding surveying and measurement tasks that require the highest in precision.
• 0.5" angle accuracy.• Sub-millimeter EDM with 0.5mm + 1ppm precision with reflective
sheets.• Windows CE.• IP65 dust /water protection.• Long-range Bluetooth module option.
NET05AX NET05X NET1AX NET1200
Angle Display resolutions (Selectable) 0.1" / 0.5", 0.00002 / 0.0001gon, 0.0005 / 0.002mil0.5"/1", 0.0001 / 0.0002gon,
0.002 / 0.005mil
Angle Accuracy (ISO 12857-2:1997) 0.5", 0.15mgon, 0.0025mil 1" / 0.3mgon / 0.005mil
Measuring range With reflective sheet target 1.3 to 200m (4.3 to 650ft.) 1.3 to 300m (4.3 to 980ft.) 1.3 to 200m (4.3 to 650ft.)
Reflectorless*1 0.5 to 100m (1.6 to 320ft.) 0.3 to 100m (1.0 to 320ft.) 0.5 to 400m (1.6 to 1,310ft.) 1.3 to 40m (4.3 to 130ft.)
With 1 AP Prism 1.3 to 3,500m (4.3 to 11,480ft.) 1.3 to 2,000m (4.3 to 6,500ft.)
Minimum distance resolution(selectable) Fine mode
0.00001m (0.01mm)0.0001ft., 1/64in.
0.0001m (0.1mm)0.001ft., 1/16in.
0.0001m / 0.1mm0.001ft., 0.01in.
Distance Accuracy(ISO17123-4:2001)
Reflective sheet target (0.5 + 1ppm x D)mm (1+1ppm x D)mm ± (0.6 + 2ppm x D)mm
Reflectorless*1 (1 + 1ppm x D)mm (2+1ppm x D)mm ± (1 + 2ppm x D)mm
With Prism (0.8 + 1ppm x D)mm (1 + 1ppm x D)mm ± (2 + 2ppm x D)mm
Auto-Pointing range With 1 AP prism 2 to 1,000m (6.6 to 3,280ft.) – 2 to 1,000m (6.6 to 3,280ft.) –
With reflective sheet (RS50N-R) 5 to 50m (16.4 to 160ft.) – 5 to 50m (16.4 to 160ft.) –
Auto-Tracking range With ATP1(S) 360° prism 2 to 600m (6.6 to 1,970ft.) – 2 to 600m (6.6 to 1,970ft.) –
Auto-Pointing Accuracy*2 With Prism 1"(1mm@200m) – 1"(1mm@200m) –
With reflective sheet 1mm@50m – 1mm@50m –
*1 With Kodak Gray Card white side (90% reflective).*2 Auto-pointing accuracy is verified using the methods specified by the ISO 17123-3.
USBWIN-CE
NET05XDLC1
13
The industry's widest variety of reflective targets ensures full functionality of the MONMOS 3D Measuring System.
Targets for MONMOS
3D
Coord
inate
Measurin
g S
yste
m M
ON
MO
S
• Choose from various sizes according to measuring distance.• "T" type sheets feature 0.3mm thin cross lines for higher sighting
accuracy.• The unique "Half" type targets provide further measurement flexibility.
Note: NET1200 can also adopt the "K" type targets for normal total stations.
Reflective SheetsRS Series
Reflective Sheets RS Series
Self-adhesive sheets can be directly attached to the objects to be measured.
• Plastic Targets for long-range measurement.• Rotary Targets provide easy connection of coordinate
systems when instrument position is shifted. • 2-point Target for hidden measurement points,
Detachable Anchor Grip Type Targets, and more. Consult your local SOKKIA agent for further details.
RC100 RC50 RT30G10 RT50G10 RT90G10
RT1ART50M RT90M 2RT310A TK2
Specialized Targets
Half Type Reflective Sheets RS20H-R RS30H-R RS50H-R RS90H-R
Size (mm) 10×20 15×30 25×50 45×90
Number of targets per sheet 200 98 32 8
Cross-line thickness 0.5mm
RS00-R RS10N-R RS15N-R RS20N-R RS30N-R RS50N-R RS70N-R RS90N-R RS05T-R RS10T-R RS15T-R RS20T-R RS30T-R
Size (mm) 230×230 10×10 15×15 20×20 30×30 50×50 70×70 90×90 5×5 10×10 15×15 20×20 30×30
Number of targets per sheet 1 441 196 100 49 16 9 4 1600 441 196 100 49
Cross-line thickness Plain 0.5mm 0.3mm
Reflective Sheets
CPS12 KUS1 RC50 RC100 RT1A RT30G10 RT50G10 RT90G10 RT50M RT90M 2RT310A TK1 TK2
Product name High-Precision
Prism
Magnet Block
Plastic Type TargetsHigh-
Precision Target
Anchor Grip Type Rotary Targets w/10mm male screws
Magnetic Type Rotary Targets
Two-Point Target
Corner Half Target
Surface Half Target
Target size and/orconfiguration
w/tribrach 6 pcs. 50×50mm 100×100mm90x90mm w/tribrach
30×30mm 50×50mm 90×90mm 50×50mm 90×90mmw/magnet
arm
3pcs., 25x50mm
w/case
5pcs., 25x50mm,
w/case
DT940DT240
14
Beam spot diameter Focused beam 2.1mm@20m, 10.3mm@100m, 15.5mm@150m
Parallel beam 15.1mm@20m, 15.3mm@100m, 15.5mm@150m
Laser output 1.0 to 4.5mW (variable)
Telescope magnification 30x
Display resolutions 1"/5", 0.2/1mg, 0.005/0.02mil
Angle accuracy (ISO17123-3:2001) 5"/1.5mg / 0.025mil
Continuous use witha standard rechargeable battery 13.5 hours (laser output 1mW)
12.5 hours (laser output 4.5mW)
DT240 DT540 DT740 DT940 DT540L DT740L DT940L
Standard Model Laser Model
Laser visible range Daylight / Indoor – 50m (160ft.) / 200m (660ft.)
Telescope Magnification 30x 26x 30x 26x
Display resolutions (selectable)1" / 5"
0.2 / 1mgon5" / 10"
1 / 2mgon10" / 20"2 / 5mgon
1" / 5"0.2 / 1mgon
5" / 10"1 / 2mgon
10" / 20"2 / 5mgon
Angle Accuracy 2" 5" 7" 9" 5" 7" 9"
Automatic compensator Working range ±3'(±55mgon) – – ±3'(±55mgon) – –
Control panel layout On both faces On single face On both faces On single face
Weight w/batteries 4.1kg (9.0lb.) 3.5kg (7.7lb.) 4.2 kg (9.3lb.) 3.6kg (7.9lb.)
Battery LR6/AA batteries x 4 LR6/AA batteries x 4
Operating time with alkaline batteries(approximate)
Theodolite onlyLaser only
Theodolite + laser
100hours 140hours 150hours 170hours 140hours 150hours 170hours
– 80hours
– 45hours
LDT520Laser Digital TheodoliteThe LDT520 emits a red laser beam along the telescope's line of sight for direction control or positioning in tunnel, underground or building constructions.
• Emits both "focused beam" and "parallel beam" without a need for attachments or accessories.• Variable laser output from 1.0 to 4.5mW.• Focused beam reaches over 600m (1,960ft.) while parallel beam up to 200m (650ft.).• Superior dust and water protection IP66.
Theodolites
Theodolite
s
DT240/DT540/DT740/DT940/DT540L /DT740L /DT940LDigital Theodolites Quality, Performance, and Affordability that Ensure Maximum Profitability
• Superior Performance and Durability All models feature superior optics, mechanics, advanced absolute encoder systems, proven tilt compensators, and the industry's highest IP66 protection grade.
• Power-Saving Technology Saves Battery Costs Four AA alkaline batteries provide extra-long operating time from 100 to 170 hours, saving costs for replacement batteries. The DT Series instruments operate for two to five weeks without changing batteries*.
* When used for seven hours a day, five days a week, excluding the use of laser pointers.
• Laser Pointer to Increase Construction Work Efficiency (Laser models) (The laser models incorporate built-in coaxial
laser pointers that maximize construction work efficiency. • The applications include:- Layout (Setting-Out)- Horizontal/Vertical Alignment- Leveling- Grading- Squaring
DT540L
Saving Measurement Time by up to 40%• The combination of advanced “Auto Focus” and “View Finder”
reduce the total measurement time by up to 40% compared to manual focus digital levels.
Intelligent Auto Focus• The SDL1X automatically focuses exclusively on the RAB-Code
staff, eliminating false focusing on undesirable objects.• Auto Focus eliminates the incomplete focusing that often causes
inaccurate measurement with digital levels.• Seamless switching between Auto Focus and manual focusing.
Measurement and Recording Programs• Onboard software supports height difference measurement and
data recording in the following procedures: BF, BFFB, BBFF, BFBF, aBF, aBFFB, aFBBF (B: Backsight, F: Foresight, a: alternating)
• Measurement tolerance can be set in each route for on-site accuracy checks.
World's Highest 0.2mm Precision• The SDL1X achieves the highest in precision when combined with
the New Super-Invar RAB-Code Staff BIS30A that boasts the industry's lowest linear expansion coefficient ±0.1ppm/°C.
• Ideal for first-order leveling as well as sub-millimeter height and subsidence measurement applications.
Eight innovative features never before available in the industry:* 1. 0.2mm precision (ISO17123-2) 2. Auto Focus for high-end digital level 3. View Finder for quick sighting 4. Remote Trigger for wireless operation 5. Dual-axis Tilt Sensor that ensures precision 6. SD card slot for data storage 7. 100m (320ft.) Bluetooth wireless communication 8. BIS30A staff with ±0.1ppm/ºC linear expansion coefficient
* As of Dec. 1, 2010
SDL1XDigital Level The SDL1X is designed to achieve the highest precision and productivity in leveling and height measurement applications. From Intelligent Auto Focus to wireless operation, a number of innovative technologies are implemented for unmatched reliability. The SDL1X sets the ultimate benchmark for the precision digital levels.
Height accuracy* 1
(with RAB-Code staffs)
0.2mm (0.008in.)*2 (with New Super-Invar BIS30A)0.3mm (0.012in.) (with Invar BIS20/30)
1.0mm (0.04in.) (with Fiberglass BGS40/50/50G3)Distance accuracy(with RAB-Code staffs)
Up to 10m (33ft.) : Within ± 10mm (± 0.4in.), 10 to 50m (33 to 160ft.) : Within ± 0.1% x D (D=measuring distance)
Measuring range (with RAB-Code staffs) 1.6 to 100m (5.3 to 328ft.)
Minimum display(with RAB-Code staffs)
Height : 0.00001 / 0.0001 / 0.001m (0.0001 / 0.001 / 0.01ft.)Distance: 0.001 / 0.01 / 0.1m (0.01 / 0.1 / 1ft.)
Measuring time Single mode: < 2.5s, Rapid-repeat: < 1s
Auto Focus Range 1.6 to 100m (5.3 to 328ft.)
Telescope magnification 32x
Compensator Type: Pendulum compensator with magnetic damping system, Working Range: ± 12'
Horizontal circle Graduation: 1º (1gon)
Data storage 10,000 points
Weight w/battery 3.5kg (7.7 lb.)
*1 ISO 17123-2 (Standard deviation for 1km double-run leveling.)*2 Conditions for the highest accuracy: Low level of atmospheric turbulence, stable ambient
temperature, no direct sunlight on instrument and staff.
BIS30A New Super-Invar Staff• The BIS30A boasts the industry's lowest linear
expansion coefficient of ±0.1ppm/°C.• Its expansion/shrinkage value is less than 1/10 of
ordinary invar staffs in the market today. • The BIS30A ensures the world's highest leveling
precision in combination with the SDL1X digital level.
15
RAB-Code StaffsThe RAB-Code is one of the Sokkia's breakthrough technologies. Since its first introduction in 1998, the RAB-Code technology has been providing exceptional reliability in a wide variety of environmental conditions. Whether it's sunny or rainy, hot or cold, you can take measurement with maximum confidence.
Material Model Length Section Weight Reverse side graduation
New Super-Invar BIS30A 3m (9.84ft.) 1 5.5kg (12.1lb.) –
Invar BIS20 2m (6.56ft.) 1 4.3kg (9.5lb.) –
BIS30 3m (9.84ft.) 1 5.5kg (12.1lb.) –
Fiberglass BGS40 4m (13.12ft.) 3 2.4kg (5.3lb.) Metric
BGS50 5m (16.40ft.) 4 3.0kg (6.6lb.) Metric
BGS50G3 5m (16.40ft.) 4 3.2kg (7.1lb.) feet/10th/100th
Aluminum BAS55 5m (16.40ft.) 5 1.9kg (4.2lb.) Metric
BRS55 5m (16.40ft.) 5 1.95kg (4.3lb.) Metric:reflective surface
Digital Levels
Levels
BIS30A
SDL1XDLC1
BIS30/20 Invar Staffs• 1ppm/°C linear expansion.• Provides 0.3mm precision with the SDL1X and 0.6mm with SDL30.
BGS Fiberglass Staffs• Standard for the popular SDL30 and SDL50 models.
BAS/BRS Aluminum Staffs• Affordable and lightweight staffs.
Height accuracy* (with RAB-Code staves)
Distance accuracy (with RAB-Code staves)
Measuring range (with RAB-Code staves)
Minimum display (Single, Repeat, Average)
Measuring time
Telescope magnification
Compensator
Horizontal circle
Data storage
Weight w/battery
0.4mm (0.016in.) (with Invar BIS30A), 0.6mm (0.03in.) (with Invar BIS20/30),
1.0mm (0.04in.) (with Fiberglass BGS40/50/50G3)
Up to 10m (33ft.) : Within ± 10mm (± 0.4in.), 10 to 50m (33 to 160ft.) : Within ± 0.1% x D (D=measuring distance)
1.6 to 100m (5.3 to 320ft.)
Height : 0.0001m / 0.001m, 0.001ft. / 0.01ft. or 1/8in., Distance: 0.01m (0.1ft. or 1in.)
Single mode: < 3s, Tracking: < 1s
Type: Pendulum compensator with magnetic damping system, Working Range: ± 15'
Graduation: 1º (1gon)
2,000 points in max. 20 job files, (Job name user-definable)
2.4kg (5.3lb.)
0.6mm (0.024in.) (with Invar BIS30A),1.5mm (0.06in.) (with Fiberglass BGS40/50/50G3)
SDL30
SDL50
32x
28x
B20/B30/B40Automatic LevelsSOKKIA provides a wide range of automatic levels to suit your specific needs. All models incorporate exclusively designed precision compensators that employ a magnetic damping system for outstanding accuracy and dependability.IPX6 compliant water resistant.
B20 B40B30
GS1Super Invar StaffThe GS1 is specially designed for the most precise leveling tasks. GS1's thermal expansion is theoretically "zero".
B20 B30 B40
Telescope Objective aperture 42mm (1.7in.) 36mm (1.4in.) 32mm (1.3in.)
Magnification 32x 28x 24x
Minimum focus 0.2m (7.9in.) from end of telescope, 0.3m (1.0ft.) from instrument center
Accuracy* Without micrometer 0.7mm (0.03in.) 1.5mm (0.06in.) 2.0mm (0.08in.)
With micrometer 0.5mm (0.02in.) –
Compensator Type 4 wire pendulum compensator with magnetic damping system
Working range ±15'
Horizontal circle graduation 1º (1gon)
Water protection IPX6 (IEC60529)
Weight 1.85kg (4.1lb.) 1.7kg (3.7lb.)
* Standard deviation for 1km double-run leveling.
16
Levels Digital Levels
SDL30/SDL50Digital LevelsSimply focus on the RAB-Code staff and press a button. The measurement results of both height and distance are displayed on the screen in 3 seconds. The SDL30 and SDL50 digital levels minimize human error and maximize the ease of leveling work, allowing an increased productivity.
• The SDL30/SDL50 automatically calculate height difference and elevation.• Setting-out for cut/fill can be easily performed.• Internal memory stores 2,000 points of data in 20 job files.• Measured data can be exported in CSV format using “SDL TOOL” software.
• The innovative "Wave-and-Read" technology provides automatic detection of the least value of staff reading while the staff is waved back and forth.
SDL30• A high performance digital level with 0.6mm precision using Invar RAB-Code staffs.• 1.0mm accuracy with using standard fiberglass RAB-Code staffs.
SDL50• A digital level with 1.5mm height precision.• Provides convenience and functionality of digital technology at an affordable cost.
Automatic Levels Super Invar Staff
SDL30
SDL50
Wave-and-Read
* ISO17123-2 (Standard deviation for 1km double-run leveling.)
17
Constru
ctio
n L
ase
r Instru
ments
Construction Laser Instruments
LP410 LP415
LP415S LR200
LP410/LP415/LP415SLeveling LaserA Compact and Rugged Self-leveling Laser Offering Superior Reliability at an Affordable Cost.
• Simply press the button and the LP410/415/415S quickly levels itself and start rotating.
• With a visible laser, a flashing red light in the laser-emission window makes laser projection clearly noticeable even at a distance.
• The LP410 provides a 500m (1,640ft.) working range in diameter with its one-instrument setup to enhance productivity in large-scale construction applications.
• The LP415 and LP415S provide a 300m (1,000ft.) working range in diameter, more than enough for most construction and interior/exterior work.
• The LP415S generates a single-grade laser plane with a range of ±8.7% (±5°).
• The LR200 advanced detector features Triple Guides for laser detection: LCD on both sides, 3-color LEDs, and a buzzer.
• The LCD provides 9 levels of grade display and out-of-range information.
LP410 LP415 LP415S
Horizontal accuracy 10" (1.5mm/30m)(0.06in./100ft.)
15" (2.2mm/30m)(0.09in./100ft.)
Operating range in diameter 500m (1,640ft.) 300m (1,000ft.)
Self-leveling range ±3° ±3° ±5° (at 0% grade setting)
Grade range* – ±8.7% (Single grade)
Rotation speed 600rpm
Weight w/battery Approx. 2kg (4.4lb.)
* Maximum grade range depends on the tilt of an instrument.
Beam accuracy
Operating range
Beam spot diameter (at emission)
Weight w/battery
Upward: ±5", Downward: ±1'
Upward: 100m (330ft.), Downward: 5m (16ft.)
Upward: 7mm (9/32in.), Downward: 2mm (1/12in.)
2.5kg (5.5lb.)
LV1Precision Laser PlummetThe LV1 offers a high level of plumb precision. The laser beams directed both up and down to easily locate points that are vertically above and directly below a given reference point.
SDG1Dual-Grade LaserThe SDG1 creates the wide range of dual-grade laser plane for road construction, land preparation, etc.
• The laser plane can be sloped in X and Y perpendicular directions.• Controls the tilt of rotating axis with a revolutionary encoding system.• 800m (2,620ft.) working range.• All operations can be performed with LRC6 standard wireless
remote controller within a 300m (1,000ft.) range.• Advanced laser detector LR200 has LCD on both faces, 3-color
LEDs for easy recognition at a distance, HI alert and battery level detections.
Repeatability ±5"
Horizontal accuracy 10" (1.5mm@30m)
Operating range in diameter 800m (2,620ft.)
Grade range X -10 to +10% (0.001% increments)
Y -5 to +25% (0.001% increments)
Self-leveling range ±5°
Rotation speed 300 / 600 / 900 rpm, selectable
Weight w/battery 3.6kg (7.9lb.)
SDG1LRC6 LR200
18
LX32/LX34Multi-Crossline LasersThanks to the remarkable leveling speed, wide operating area and certified SOKKIA quality, the LX32 and LX34 greatly increase work efficiency in leveling, plumbing, alignment and layout applications.
• High-intensity laser diodes and advanced optical technologies provide extremely bright laser lines from an easy-to-use Class 2 laser.
• Self-levels in 3 seconds. The magnetic damper ensures line stability.• The standard detector LD601 expands the operating range up to 40m
(130ft.) for exterior applications.• Compact body weighs only 900g (2lb.).• Fits into tight spaces by retracting the legs.
Construction Laser Instruments
Constru
ctio
n L
ase
r Instru
ments
SP1Pipe LaserThe SP1 Pipe Laser boosts the pipe laying efficiency.
• Sloped red laser beam is emitted for pipe laying guidance.• Grade setting is precisely controlled with an absolute rotary encoder.• Tough cast aluminum housing withstands harsh environments.• Completely waterproof body will survive an accidental submersion
in water.• Remote controller SPRC1 works in a range of 200m (660ft.).• The detachable battery can be easily swapped without disturbing
set-up.
Horizontal accuracy 10" (1.5mm@30m)
Grade range -15 to +40% (0.001% increments)
Self-leveling range Beam axis: ±10%
Cross axis: ±4°
Water protection At a depth of 5m (16.4ft.) for a minimum of 24 hours (far exceeding IPX7 specification)
Weight w/handle and battery 3.8kg (8.4lb.)
SPRC1 SP1
LX442Full-Crossline LaserFeaturing Full-Crossline and Swift Self-Leveling, the LX442 ensuresgreater productivity in leveling, plumbing, alignment and layout, in both interior and exterior applications.
• Full-line capability minimizes the need for changes of instrument setup.• Electronic self-leveling mechanism provides more stable lines than
pendulum-or gimbal-type lasers, even in sites subject to vibration.• Just turn off the self-leveling and set the LX442 to the desired angle
to project slope lines.• Standard wireless controller allows remote selection of horizontal
and vertical lines, line-lock and detector mode.• The LD601 detector is included as standard.
Laser projection angle H: 360° / V: 120° x 4 lines
Line accuracy H&V ±1 mm@10 m (±0.04in.@33ft.) / ±20 arc seconds
Self-leveling type/range Electronic / ±3°
Operating range 20 m (66ft.) with detector
Power supplyR6 (AA) alkaline batteries x 3
AC 100 to 240V (with the standard AC adapter)Operating time with alkaline batteries 1V + 4H Approx. 10 hours
4V + 4H Approx. 6 hours
LX32 LX34
Laser projection angle H: 120° / V: 120° x 3 lines
Line accuracy H&V±1mm@10m
(±0.04in.@33ft.)/ ±20 arc seconds
±2mm@10m(±0.08in.@33ft.)/ ±40 arc seconds
Self-leveling range 2.5°±0.5°
Operating range 40m (130ft.) with detector
Power supply R6 (AA) batteries x 3
Operating time with alkaline batteries More than 5 hours
LD601
LD601
LX442
LX32 LX34
19
Main Unit
Distance of optical path 27cm
Magnification Swing-in Magnifier: 1.8x,
BN3 Binocular: 3x, BN8A Binocular: 8x
Field of view of stereoscope 18 x 23cm
Field of view of binocular BN3: 70mm, BN8A: 27mm
Range of eye-span 55 to 75mm
Weight 4.0kg (8.8lb.)
PB1 Parallax Measuring Bar
Minimum graduation / Estimation 0.05mm / 0.01mm
Measurement range 0 to 50mm
Length / Weight 39.5cm / 0.5kg (1.1lb.)
TRA2 Tracking Device (option)*
Size of photographs Up to 45 x 45cm
Range of displacement Latitudinal: 550mm / Longitudinal: 450mm
* The TRA2 cannot be used together with the LA3 Illumination Unit.
MS27Mirror StereoscopeThe MS27 offers unmatched precision and ease of use for viewing and interpreting aerial photographs.
• The distance between the stereo pairs is 27cm, and the field of view is a generous 18 x 23cm.
• TRA2 tracking device (option) allows for accurate stereoscopic
observation over entire overlapped portions of photographs.
• Illumination unit LA3 is provided as an optional accessory.
BB KH1 BK3
Length 200mm 170mm 200mm
Magnification 5x — 5x
Stadia multiplication constant 100 — 100
Vertical reading — 1º
Vernier reading — 10'
BB KH1 BK3
OS1Optical Square• Two pentaprisms are precisely
located on either side of a parallel plate.
• Three points can be located by sighting through the optical square.
Model
PFW1
PFA1
PFA1L
PSA1
PSA1L
Material
Hardwood
Aluminum
Aluminum
Aluminum
Aluminum
Head
Flat
Flat
Flat
Domed
Domed
Head Screw
ø 5/8in.
ø 5/8in.
ø 5/8in.
ø 5/8in.
ø 5/8in.
Clamp
Screw
Screw
Lever
Screw
Lever
6.3kg (13.9lb.)
4.4kg (9.7lb.)
4.6kg (10.2lb.)
4.3kg (9.5lb.)
4.6kg (10.2lb.)
Weight
PFW1 PFA1 PSA1PFA1L
TripodsAn extensive range of tripods is available from SOKKIA to suit specific instrument types.
For GNSS/GPS Antennas, Total Stations and Theodolites
For Levels and Leveling Lasers
PS4A/PS2A Pocket Stereoscopes• Handy lens-type
stereoscopes.• Distance between
lenses is adjustable from 56mm to 75mm.
• Two magnifications available, 4x (PS4A) and 2x (PS2A).
PS2A PS4A
MS16Small Mirror Stereoscope• Compact yet practical
mirror stereoscope.• 16cm optical path provides
a wide field of view.
Distance of optical path 16cm
Magnification 1.5x
Field of view 10 x 10cm
Weight 0.7kg (1.5lb.)
MS27+ TRA2
BB/KH1/BK3Hand Levels
Survey Equipment
Surv
ey E
quip
ment
Continuously tracks the prism, updating distance and angle values in real-time.
Automatically sights and measures the target.
Survey-grade reflectorless distance measurement.
Possible to perform measurements using reflective sheet targets.
Equipped with a high-visibility guide light to aid in setting-out operations.
Windows CE based operating system installed.
Supports a CompactFlash memory card for data storage and handling.
Supports an SD memory card and a large capacity SDHC card for data storage and handling.
USB port for data storage and/or connection with a PC.
Low Temperature models available.
High Temperature models available.
Protection against ingress ofsolid foreign objects
Protection against ingress of water
Icons used in this catalog
+60˚C/+140˚F
Laser Class: IEC 60825-1Amd.2:2001 / FDA CDRH 21 CFR Part1040.10 and 1040.11 (Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No.50, dated July 26, 2001.)
All weights are approximate. Due to printing processes, the colors of the products printed in this catalog may vary slightly from those of actual products.Certain products in this catalog may not be available in specific market areas. Please consult with your nearest SOKKIA representative for details.Designs and specifications are subject to change without notice.Product names mentioned in this brochure are trademarks of their respective holders.The Bluetooth ® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
© 2
011
TOPC
ON C
ORPO
RATI
ON. A
ll rig
hts
rese
rved
. SOK
KIA
is a
trad
emar
k of
SOK
KIA
TOPC
ON C
O., L
TD.
2011 01 P-25-4 Printed in Singapore
SOKKIA SINGAPORE POSITIONING SALES PTE LTD60 ALEXANDRA TERRACE, #08-27 THE COMTECH SINGAPORE 118502PHONE : +65 6479 3966 FAX : +65 6479 4966 WEBSITE : www.sokkia.com.sgCOMPANY REG. NO. : 201007531Z