MULTIPATH TURRET SWIVELS AND SWIVEL STACKS€¦ · Development. Swivel Operating Scope Updated to:...
Transcript of MULTIPATH TURRET SWIVELS AND SWIVEL STACKS€¦ · Development. Swivel Operating Scope Updated to:...
MULTIPATH TURRET SWIVELS AND SWIVEL STACKS
Production, gas, hydraulic & utility, chemical injection, single, in-line and multi-path swivels and swivel stacks - developed in accordance with and verified by industry
regulations.
FES provides multipath production, single inline gas import and export, chemical injection and hydraulic swivels as standalone
components, and frequently as part of a tailored swivel stack design, engineered to meet all project requirements and facilitate efficient
operation of vessel fluid transfer operations.
Can comprise a range of hydraulic and chemical
15,000PSI +
MULTIPATH HYDRAULIC/CHEMICAL
Multiple seal arrangement and leak detection system to provide low risk oil & gas export,
PRODUCTION/EXPORT
Typically an in-line swivel mounted on the top of the stack, with primary and secondary sealing arrangement and leak detection system
GAS EXPORT
ATEX/IECEx approval provided as required, IP66 and above rated Electrical Slip Rings provide electrical data transfer
ELECTRICAL & FIBRE OPTIC
The Stator (Inner) section of each Swivel is fixed to the geo-static turntable on the Turret. The Rotor (Outer) sections of the Swivels are fixed to the FPSO / Vessel by Drive Arms, allowing the Rotor to rotate around the central stationary stator. The Swivels are modular in design and can be stacked in order to allow simultaneous fluid paths to be made between the FPSO / Vessel and the Turret.
SWIVEL STACKSTypical stack arrangement
1 2
3 4
1
2
3
4
SCOPE OF SUPPLY
• 6 Production Export Swivels 5,000 PSI Design Pressure• Multi path Hydraulic Swivel 5,000 PSI Design Pressure• Multi path Utility Swivel 5,000 PSI Design Pressure• Multi path Chemical Swivel 5,000 PSI Design Pressure• Electrical Slip Ring
FES TRACK RECORD
BROVIG OFFSHORECRYSTAL OCEANCHESTNUT FIELD DEVELOPMENT
SCOPE OF SUPPLY
FPSO repurposed for redeployment to Basker/ManterDevelopment. Swivel Operating Scope Updated to:•
• Multi path Hydraulic Swivel 7,500 PSI Design Pressure • Multi path Utility Swivel 7,500 PSI Design Pressure• Multi path Chemical Swivel 7,500 PSI Design Pressure• Electrical Slip Ring
FES TRACK RECORD
BROVIG OFFSHORECRYSTAL OCEAN
BASKER/MANTER FIELD DEVELOPMENT
SCOPE OF SUPPLY
• 6 Production Export Swivels 5,000 PSI Design Pressure• 3 Gas Injection Swivels 5,000 PSI Design Pressure• Multi path Hydraulic Swivel 5,000 PSI Design Pressure• Multi path Utility Swivel 5,000 PSI Design Pressure• Multi path Chemical Swivel 5,000 PSI Design Pressure• Electrical Slip Ring
FES TRACK RECORD
VANGUARDFOUR VANGUARD
WOOLLYBUTT DEVELOPMENT
SCOPE OF SUPPLY
• 6 Production Export Swivels 5,000 PSI DesignPressure
• 6 Water Injection Swivels 5,000 PSI Design• 4 Utility Swivel 3,000 PSI Design
FES TRACK RECORD
PETROFAC IKDAM
OUDNA FIELD DEVELOPMENT
SCOPE OF SUPPLY
• 8 Channel Multi path Hydraulic Control Swivel 5,000PSI Design Pressure
• 6 Production Swivels 5,000 PSI Design Pressure• Electrical Slip Ring
FES TRACK RECORD
ECO MV VICE ADM. K.R. WHEELER
VARIOUS DEPLOYMENTS WORLDWIDE
SCOPE OF SUPPLY
•
• 2 off 8 channel Multi path Hydraulic / Chemical Injection Swivels 10,000 PSI Design Pressure
• 1 off 7 channel Multi path Hydraulic / Chemical Injection Swivels 10,000 PSI Design Pressure
• 1 off 6 channel Multi path Utility Swivel 5,000 PSI Design Pressure•
• Electrical Slip Ring
FES TRACK RECORD
HELIX ENERGY HELIX PRODUCER
PHOENIX FIELD DEVELOPMENT
SCOPE OF SUPPLY
• 2 off 6 Production Import Swivels 5,000 PSI DesignPressure
• 4 off 10 channel Multi path Hydraulic Swivels 5,000PSI Design Pressure
• Electrical Slip Ring
FES TRACK RECORD
RUBICON INTREPID
GALOC FIELD DEVELOPMENT
DESIGN & ANALYSISFES International utilise highly qualified technical personnel and the latest software to design and analyse our products
A combination of calculations in accordance with industry standards, sophisticated computer software & the latest FEA programmesare utilised to achieve the necessary design parameters and a first class engineered solution to each client project specification.
MANUFACTURE, ASSEMBLY & TESTING
MANUFACTURE
All components are designed and manufactured by FES International and approved sub suppliers, ensuring that we retain control of product quality and material traceability.
ASSEMBLY & TESTING
In-house assembly and testing facilities ensure all test procedures and inspection & testing plans are strictly adhered to. Tests included Third Party Approved Static / Dynamic Pressure Test, Breakout, Running Torque and Axial Load Testing with Data Logging Capability
Our quality management system has been assessed and accredited
to ISO 9001:2015
QUALITY MANAGEMENTFurther illustrating our commitment to QHSE, our quality management
system has also been assessed and certified to the stringent industry
specification API Q1,.
Our health and safety management system has been assessed and
accredited to OHSAS 45001:2018
HEALTH & SAFETYFES has been assessed and
accredited to ISO 14001 certification for environmental management.
ENVIRONMENTAL
QUALITY, HEALTH & SAFETYFES places quality and safety at the heart of everything we do
KEY FEATURESFES Multipath Turret Swivels and Swivel Stacks
• Multi-path or single In- line swivel systems design to meet with project / client requirements
• Pressure ranges from 0-15,000 PSI
•
• Swivel system sealing system designed to operate with a diverse range of fluid media including live Hydrocarbons incl. Sand and Solids, Stabilized Hydrocarbons, Gas, Hydraulic Oil & Various Chemicals
• Multiple sealing system available to ensure pressure integrity is maintained
• Swivel sealing systems incorporating leak detection / re-cooperation system for constant monitoring of swivel seal performance and condition
• Swivel systems integrated with robust Roller & Composite Bearing systems to achieve maximum required Axial & Radial design loads
• Third party classification society design approved
• Full material trace ability available in accordance with EN 10204 3.1 or 3.2
• Optimised design for maximum weight and cost savings
ContactUs
Phone00 44 (0)1670 524 960
Websitewww.fesinternational.com
Head OfficeMerchant Court,North Seaton Industrial Estate,Ashington,Northumberland,NE63 0YH
Fax00 44 (0)1670 524 970
Other LocationsMenara UOA Bangsar, Unit A-12-1, Block A, No.5,Jalan Bangsar Utama 1, 59000 Kuala Lumpur, Malaysia.
Rua das Marrecas, 39/602Rio de Janeiro RJZIP: 20031-120 Brazil
10 Anson Road#16-10 International PlazaSingapore079903