Multifold 30 - Free Instruction Manuals · 2016. 4. 11. · MF30-13/2 Contents Pack No. 2 panel...
Transcript of Multifold 30 - Free Instruction Manuals · 2016. 4. 11. · MF30-13/2 Contents Pack No. 2 panel...
Issue 2 DATA sHeeT D40 Product improvement is a continuous process. Please check specification at time of purchase.
ApplicationSuitable for residential and light commercial folding partitions.
Panels can be either end folding or centre folding.
Panels can fold to one or both sides of the opening.
Pivot hardware enables an end folding internal partition to be designed using standard width door panels with no need to reduce the width of the panel adjacent to the jamb.
Door SpecificationMultifold 30
2400mm30kg650mm19mm
Contents 2 panel track set include - 1300mm top track, top pivot assembly, bottom pivot, wall bracket, hanger, bumper, spanner, 3 x hinges, all screws and fitting instructions.
Track System:For Individual Panels:Max Panel HeightMax Panel WeightMax Panel WidthMin Panel Thickness
The folding unit is not hinged to a jamb, but is pivoted in the track and on theadjustable jamb bracket.End folding units of two, four, six or eight panels can be pivoted to each side ofthe opening.Centre folding units of one, three, five or seven full width panels and one “half”width panel can be pivoted to each side of the opening.A guide system across the floor must be used on end folding units of four panelsor more in excess of 450mm wide or 15kg per panel.Instructions on panel width calculation is shown overpanel. Door panels shouldbe constructed to provide secure fitting for the pivots, hangers, hinges andguides and can be either flush, panelled or of louvre construction.
Multifold 30 For Top Hung Interior Folding Partitions. Max 30kg Each
Standard Fitting Packs and Sets
60Aluminium, Mill2000mm, 3000mm, 4000mm and 6000mm
60Ds Rubber and steel, zinc dichromated818 Zinc dichromated steel and nylon802 Zinc dichromated steel and nylon805 Zinc dichromated steel and nylon806 Zinc dichromated steel and nylon605 Zinc dichromated steel and nylon body
822Z Steel, in zinc dichromate, non mortice hinge805-SPN Steel, in zinc dichromate finish91
92, 130 and 801
401360
Hardware SpecificationTrack MaterialStandard Lengths
BumperTop Pivot Assembly:Bottom Pivot:Floor Bracket - adjustable:Wall Bracket - adjustable:Hanger: The hanger is fitted with four nylon tyred ballrace wheels. The adjustment bolt isattached to the top plate and secured in place with a locking clip which allowseasy installation.Hinges:Spanner:Bracket:Bracket made from stainless steel and supplied with matching fasteners. Available singularly or in pack of 5, reference 91/5.Threshold and Guide:92 & 130 threshold, aluminium, available in the same lengths as 60 track801 guide – spring loaded – in nylon and zinc dichromate steel.Accessories:Flush Pull - with deep gripFlush Bolt - with flat shoot
Set No. MF30-13/2
Contents 2 panel pack4 panel pack6 panel packAdd-on 2 panel pack includes - one hanger, six hinges and all screws. For each folding unit, select one MF30-2PK basic pack, sufficient MF30-APK add-on fitting packs and a suitable length of 60 track (see below) to cover the width of the opening.
Pack No. MF30-2PKMF30-4PKMF30-6PKMF30-APK
No. 91 BRACKET
No. 605 HANGER
No. 818 TOP PIVOT
No. 805-SPN SPANNER
No. 802 BOTTOM PIVOT
No. 805 FLOOR BRACKET
No. 806 WALL BRACKET
No. 822Z HINGE
No. 60DS DOOR STOP
No. 92 THRESHOLD
No. 130 THRESHOLD
No. 801 GUIDE
No. 91 BRACKET
No. 605 HANGER
No. 818 TOP PIVOT
No. 805-SPN SPANNER
No. 802 BOTTOM PIVOT
No. 805 FLOOR BRACKET
No. 806 WALL BRACKET
No. 822Z HINGE
No. 60DS DOOR STOP
No. 92 THRESHOLD
No. 130 THRESHOLD
No. 801 GUIDE
®
Basic packs include - top pivot assembly, bottom pivot, wall bracket, hanger(s), bumper, spanner, set of hinges, all screws and fitting instructions.
DATA sHeeT D40B
Multifold 30 For Top Hung Interior Folding Partitions. Max 30kg Each
32
28
43 to 49
No. 605HANGER
ALTERNATIVE BOTTOM GUIDE & PIVOT SYSTEMS
6 1 1 1 6
BOLTS AND PULLS BOLTS AND PULLS
6 1 1 1 1 6
4 LEAF UNITEND FOLDING
5 LEAF UNITCENTRE FOLDING
½
D40B
ALTERNATIVE HEADDETAIL
BRACKET QUANTITYREQUIRED FOR TRACKLENGTHS:
LENGTH
90012501700210025003000380551056000
QUANTITY
4578
1012151923
No. 91 BRACKET
No. 60DS DOOR STOP
43 to 49
32
28
No. 818TOP PIVOTASSEMBLY
DOORHEIGHTEQUALSFINISHEDOPENING
HEIGHTLESS 54
MIN
SECTIONSCALE 1:1
11 MIN.NO GUIDE
No. 802BOTTOMPIVOT
19 MIN.
No. 805 FLOOR BRACKET
No. 805 FLOOR BRACKET
9
No. 802BOTTOMPIVOT
16 MIN.WITH GUIDE
No. 801 GUIDE-SPRING LOADED
No. 92THRESHOLD
*25
NOTE: SYSTEMS USING 801 GUIDEWITH DOOR WIDTH LESS THAN 22mm*25 MUST BE 28mm.
No. 282 HINGE
No. 60TRACK No. 282 HINGE No. 605 HANGER
No. 818 TOP PIVOTASSEMBLY
6 25
650 MAX.
EQUAL EQUAL625
VIEW FROM INSIDE CENTRE FOLDING DOOR VIEW FROM INSIDE ENDFOLDING DOOR
No. 60DSDOOR STOP
No. 802 BOTTOM PIVOTNo. 806 WALL BRACKET (SUPPLIED IN PACKS & KITS)
Ø11
33
13 11
Brio is a division of RMD Industries brio.com.au
®