MULTI-POINT CLOSURES FOR SLIDING SYSTEMS MULTIP 2154-GB.pdf · 2 closing points, with anti-lifting...
15
MULTI-POINT CLOSURES FOR SLIDING SYSTEMS Multi-point closures for sliding systems Stainless and galvanized steel versions Backset of 7.5 mm and 15 mm Wide range of heights Versions with pre-assembled anti-lifting device and security against false operation Closures in galvanized steel tested in salt spray and classified in digit 4 (480 hours)
Transcript of MULTI-POINT CLOSURES FOR SLIDING SYSTEMS MULTIP 2154-GB.pdf · 2 closing points, with anti-lifting...
MU
LTI-
PO
INT C
LO
SU
RE
S
FO
R S
LID
ING
SY
STE
MS
Multi-point closures for sliding systemsStainless and galvanized steel versionsBackset of 7.5 mm and 15 mmWide range of heightsVersions with pre-assembled anti-lifting device and security against false operationClosures in galvanized steel tested in salt spray and classified in digit 4 (480 hours)
New multipoint closures: security slides quickly and easily
Versatility ischild’s play.
The new rollers for sliding doors and windows are suitable for both non-thermal and thermal break profiles.Smooth enough for effortless opening of every sliding door or window.Strong enough for weight capacity of up to 200 Kg for 25,000 cycles.
Technical features:• Adjustment in millimetre increments with stainless steel locking screw.• Fixing on profile with pre-assembled grub screws.• Tested for 25,000 cycles in compliance with EN 13126-15: 2008.• Weight capacity of up to 220 kg per leaf.• Suitable for both non-thermal and thermal break profiles.
General featuresGeneral features01 02
New, heavy-duty rollers.
More points, more securityMulti-point locking systems boost security of doors and windows and throughout the home.
Versatility is its strength New system physically andaesthetically suitable to each profile. Latter with cylinder vailable in stainless or galvanised steel.
Smart lockStainless and galvanized steel versionsare factory-fitted with mishandling device, which prevents unintentional damage if you turn the cockspur handle when the sliding door/window is open.
Locking system for sliding doors and windows: multi-point locks,
more security, in a wide range of options.
Application scheme on sliding window
Applications 04Applications03
Application scheme on sliding window
1
2
3
4
56
2154.7/302154.7/30X2154.7/602154.7/60X2154.7/1002154.7/100X2154.7/1802154.7/180X2154.801/..2154.802/..2154.803/..2154.804/..2154.811/..866.3/7866.4/7874.3/7874.4/71610/7
2154.15/302154.15/30X2154.15/602154.15/60X2154.15/1002154.15/100X2154.15/1802154.15/180X2154.751/180
2061
2203.1/22203.51/1202203.51/1802203.52/1202203.52/180
7 2150.12151.12152.12156.1A29624300
2
5
2
7
7
13
7
7
6
4
Items 06Technical features05
Double rollersnylon shell
adjustment slide in zamak with
cataphoresis painting
steel roller bearings
stainless steel adjustment screw
nylon wheels
nylon friction
steel pins
cover and support in zamak with cataphoresis painting
nylon shell
steel roller bearing
nylon wheel
Single rollers
grub screw for fixing on profiles
grub screw for fixing on
profiles
Item Description Pcs. Finishes
2154.7/30 Multi-point closure for sliding systems in galvanized steel, 1 closing point, with anti-lifting device, backset of 7.5 mm. Length of 300 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.7/30X Multi-point closure for sliding systems in stainless steel, 2 closing points, backset of 7.5 mm. Length of 300 mm.
6
Item Description Pcs. Finishes
2154.7/60 Multi-point closure for sliding systems in galvanized steel, 2 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 600 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.7/60X Multi-point closure for sliding systems in stainless steel, 2 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 600 mm.
6
Item Description Pcs. Finishes
2154.7/100 Multi-point closure for sliding systems in galvanized steel, 2 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 1000 mm. Tested 480 hours in salt spray.
6
Multi-point closures
Multi-point closures
Item Description Pcs. Finishes
2154.7/100X Multi-point closure for sliding systems in stainless steel, 2 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 1000 mm.
6
Item Description Pcs. Finishes
2154.7/180 Multi-point closure for sliding systems in galvanized steel, 3 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 1800 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.7/180X Multi-point closure for sliding systems in stainless steel, 4 closing points, with anti-lifting device and security against false operation, backset of 7.5 mm. Length of 1800 mm.
6
Item Description Pcs. Finishes
2154.15/30 Multi-point closure for sliding systems in galvanized steel, 1 closing point, with anti-lifting device, backset of 15 mm. Length of 300 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.15/30X Multi-point closure for sliding systems in stainless steel, 2 closing points, backset of 15 mm. Length of 300 mm.
6
Items 08Items07
Multi-point closures
Item Description Pcs. Finishes
2154.15/60 Multi-point closure for sliding systems in galvanized steel, 2 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 600 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.15/60X Multi-point closure for sliding systems in stainless steel, 2 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 600 mm.
6
Item Description Pcs. Finishes
2154.15/100 Multi-point closure for sliding systems in galvanized steel, 2 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 1000 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.15/100X Multi-point closure for sliding systems in stainless steel, 2 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 1000 mm.
6
Item Description Pcs. Finishes
2154.15/180 Multi-point closure for sliding systems in galvanized steel, 3 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 1800 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
2154.15/180X Multi-point closure for sliding systems in stainless steel, 4 closing points, with anti-lifting device and security against false operation, backset of 15 mm. Length of 1800 mm.
6
Item Description Pcs. Finishes
2154.751/180 Multi-point closure for sliding systems preset for cylinder, 3 closing points, in galvanized steel, with anti-lifting device and security against false operation, backset of 15 mm. Length of 1800 mm. Tested 480 hours in salt spray.
6
Item Description Pcs. Finishes
874.3/7
874.4/7
MANON (patented) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 24.5 mm and 2 cap screws M5x35 in galvanized steel.
MANON (patented) Handle with handle in die-cast metal, base and cap in zamak, distance between centres of 43 mm, 7 mm square spindle with projecting part of 52 mm and 2 cap screws M5x60 in galvanized steel.
5
5
1013, 1015, 1035, 7032, 7035, 8019, 9001, 9005, 9010, B.MA, B.SA, BL10, BR5, BR801, C, GR217, GR51, GR606, GREY, PVD H, PVD X, SILV
1013, 1015, 8019, 9001, 9005, 9010, 9016,
B.MA, B.SA, BL10, BR5, BR801, C, GR217, GREY,
PVD H, PVD X, SILV
Item Description Pcs. Finishes
2154.801/30
2154.802/302154.803/302154.804/302154.811/30
Fitting kit for multi-point closures of 300 mm, including: 2 nylon lock shims, 1 nylon spacer, 2 nylon keeper shims, 1 zamak adapter for anti-lifting device, 2 keepers in stainless steel 304, 6 self-drilling countersunk head screws Ø 3.5x19 mm in stainless steel. For NC 60 Int. profiles.
Like 2154.801/30 but for Win 90 S profiles.Like 2154.801/30 but for Domal Slide PA 80 profiles.Like 2154.801/30 but for Triall.co 65 S/65 TT. profilesLike 2154.801/30 but for Skeit 60/Export 60 S profiles.
12
12121212
Items 10Items09
Multi-point closure fitting kitMulti-point closures
Handles
Item Description Pcs. Finishes
2154.801/60
2154.802/602154.803/602154.804/602154.811/60
Fitting kit for multi-point closures of 600 mm, including: 6 nylon lock shims, 1 nylon spacer, 3 nylon keeper shims, 1 zamak adapter for anti-lifting device, 1 nylon shim for security against false operation, 2 keepers in stainless steel 304, 12 self-drilling countersunk head screws Ø 3.5x19 mm in stainless steel. For NC 60 Int. profiles.
Like 2154.801/60 but for Win 90 S profiles.Like 2154.801/60 but for Domal Slide PA 80 profiles.Like 2154.801/60 but for Triall.co 65 S/65 TT profiles.Like 2154.801/60 but for Skeit 60/Export 60 S profiles.
12
6121212
Item Description Pcs. Finishes
2154.801/100
2154.802/1002154.803/1002154.804/1002154.811/100
Fitting kit for multi-point closures of 1000 mm, including: 7 nylon lock shims, 1 nylon spacer, 3 nylon keeper shims, 1 zamak adapter for anti-lifting device, 1 nylon shim for security against false operation, 2 keepers in stainless steel 304, 13 self-drilling countersunk head screws Ø 3.5x19 mm in stainless steel. For NC 60 Int. profiles.
Like 2154.801/100 but for Win 90 S profiles.Like 2154.801/100 but for Domal Slide PA 80 profiles.Like 2154.801/100 but for Triall.co 65 S/65 TT profiles.Like 2154.801/100 but for Skeit 60/Export 60 S profiles.
12
6121212
Item Description Pcs. Finishes
2154.801/180
2154.802/1802154.803/1802154.804/1802154.811/180
Fitting kit for multi-point closures of 1800 mm, including: 11 nylon lock shims, 1 nylon spacer, 5 nylon keeper shims, 1 zamak adapter for anti-lifting device, 1 nylon shim for security against false operation, 4 keepers in stainless steel 304, 19 self-drilling countersunk head screws Ø 3.5x19 mm in stainless steel. For NC 60 Int. profiles.
Like 2154.801/180 but for Win 90 S profiles.Like 2154.801/180 but for Domal Slide PA 80 profiles.Like 2154.801/180 but for Triall.co 65 S/65 TT profiles.Like 2154.801/180 but for Skeit 60/Export 60 S profiles.
2
666
12
Item Description Pcs. Finishes
866.3/7
866.4/7
ARIANNA Handle with handle in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 24.5 mm and 2 cap screws M5x35 in galvanized steel.
ARIANNA Handle with handle in zamak, distance between centres of 43 mm, 7 mm square spindle with a projecting part of 52 mm and 2 cap screws M5x60 in galvanized steel.
5 1013, 8019, 9005, 9010, B.MA, BL10, BR5, C,
GR217, PVD H, PVD X, SILV
1013, 8019, 9005, 9010, B.SA, BL10, BR5, C,
GR217, PVD H, PVD X, SILV
Item Description Pcs. Finishes
2061 Recessed handle with grip and base in zamak, distance between centres of 43 mm, square spindle of 7 mm, 2 countersunk head screws M5x50 in stainless steel and 1 nylon cover machining cap.
20 9005, 9010, SILV
Rollers and kit for sliding systemsItem Description Pcs. Finishes
1610/7 Handle with grip in aluminium, 7 mm square spindle with a projecting part of 38 mm and 2 countersunk head screws M5x45 in galvanized steel.
25 9005, 9016, F, U
2150.1
2151.1
40
40
Adjustable double roller in zamak varnished in cataphoresis and nylon, steel roller bearings, stainless steel screws. Weight capacity: max 180 Kg/leaf.For Export 60 S, NC 60 Int. and Skeit 60 profiles.
Like 2150.1 but with polymer roller bearings and weight capacity max 120 Kg/leaf.
Item Description Pcs. Finishes
Rollers and kit for sliding systems
Items 12Items11
Rollers and kit for sliding systems
2152.1 Adjustable double roller in galvanized steel and nylon, steel ball bearings, stainless steel screws. Weight capacity: max 90 Kg/leaf.For Export 60 S, NC 60 Int. and Skeit 60 profiles.
40
Item Description Pcs. Finishes
2156.1 Adjustable roller in nylon, steel ball bearings, stainless steel screws. Weight capacity: max 50 Kg/leaf.For Export 60 S, NC 60 Int. and Skeit 60.
40
Item Description Pcs. Finishes
2203.1 Kit of 2 nylon anti-dust caps, 4 self-adhesive sealing blocks, 4 cover machining caps, 4 nylon sash-blocking devices, 8 nylon alignment corner cleats, 3 nylon water-drain bushings, 4 self-tapping cap screws Ø4.2x9.5 in stainless steel. For NC 60 Int. profiles.
10
Item Description Pcs. Finishes
2203.2 Kit of 2 nylon anti-dust caps, 4 self-adhesive sealing blocks, 4 cover machining caps, 4 nylon sash-blocking devices, 8 nylon alignment corner cleats, 3 nylon water-drain bushings, 4 self-tapping cap screws Ø4.2x9.5 in stainless steel. For Export 60 S profiles.
10
Item Description Pcs. Finishes
A29624300 Adjustable double roller in zamak varnished in cataphoresis and nylon, steel roller bearings, stainless steel screws. Weight capacity: max 220 Kg/leaf.For Win 90 S and Win 90 S TT.
40
Item Description Pcs. Finishes
2203.51/120
2203.51/180
Sliding kit including: 4 rollers art. 2151.1 (weight capacity max 120 Kg) and 1 sliding kit art. 2203.1. For NC 60 Int. profiles.
Sliding kit including: 4 rollers art. 2150.1 (weight capacity max 180 Kg) and 1 sliding kit art. 2203.1. For NC 60 Int. profiles.
10
10
Item Description Pcs. Finishes
2150.4
2151.4
Adjustable double roller in zamak varnished in cataphoresis and nylon, steel roller bearings, stainless steel screws. Weight capacity: max 220 Kg/leaf.For Triall.co 65/TT and 90/TT profiles.
Like 2150.4 but with polymer roller bearings and weight capacity max 120 Kg/leaf.
40
40
Item Description Pcs. Finishes
2156.4 Adjustable roller in nylon, steel ball bearings, stainless steel screws. Weight capacity: max 50 Kg/leaf.For Triall.co 65/TT and 90/TT profiles.
40
Item Description Pcs. Finishes
2157.4 Nylon roller adjustable in 2 positions, steel roller bearings, stainless steel screws. Weight capacity: max 100 Kg/leaf.For Triall.co 65/TT and 90/TT profiles.
40
Item Description Pcs. Finishes
2203.52/120
2203.52/180
Sliding kit including: 4 rollers art. 2151.1 (weight capacity max 180 Kg) and 1 sliding kit art. 2203.2. For Export 60 S profiles.
Sliding kit including: 4 rollers art. 2150.1 (weight capacity max 180 Kg) and 1 sliding kit art. 2203.2. For Export 60 S profiles.
10
10
Item Description Pcs. Finishes
Technical drawings13
Multi-point closures Multi-point closures
Technical drawings 14
76
19
273
130
68
.5
7
43
M5
Backset 7.5Entrata 7.5
M574
18
13
8
92
95
67
43
7
Entrata Backset
7.5
14
7.5
M5
1919
21
8.5
60
0
19
8
12
62
44
30
0
10
0
22
6
7
43
EntrataBackset
7.5
Entrata Backset
7.5
M5
47
600
152
19
8
7
43
300
18
17
2
180
67
En
tra
ta7.5
70
Backset
15
2154.7/30 2154.7/30X
2154.7/60 2154.7/60X
EntrataBackset
7.5
19
19
50
0
39
84
44
12
610
010
00
M5
43
41
8.5
42
6
7
Entrata Backset
7.5
70
Back
set1
5
18
18
M5
50
0
43
35
2
10
00
7
39
7
47
380
37
2
67
Entr
ata
15
EntrataBackset
7.5
19
1919
M5
43
7
90
0
84
01
26
79
41
00
18
00
95.5
10
3
82
2.5
83
0
Entrata Backset
7.5
70
15
Backse
t
67
Entr
ata
15
18
18
M5
18
18
43
7
900
780
772
180
174
47
1800
797
750
152
198
2154.7/100 2154.7/100X
2154.7/180 2154.7/180X
Technical drawings15
Multi-point closures Multi-point closures
Technical drawings 16
273
7,1
43
M5
Entrata 15
19
80
130
72,5
7,2
43
M5
Entrata 15
30
1
77
141
69,5
18
95
18
2154.15/30 2154.15/30X
Entrata 15
19
226
600 100
198
126
244
19
218.5
7.1
43
M5
Entrata 15
18
18
07
0
M5
7.2
43
17
2.5
60
0 47
.51
52
19
81
8
2154.15/60 2154.15/60X
43
19
10
38
30
82
2.5
95
.5
18
00
10
07
94
84
01
91
26
7.1M
5
Entrata 15
19
18
18
772
174
47.5
1800
152
749.5
797.5
198
18
18
779.5
180
70
7.2
43
M5
Entrata 15
2154.15/180 2154.15/180X
M5
7.1
43
19
42
64
18
.5
10
00
12
6
39
84
44
19
10
0
Entrata 15
Entrata 15
18
37
9.5
37
2
10
00 47
.5 70
18
43
7.2M
5
35
1.5
397
.5
2154.15/100 2154.15/100X
82
2.5
19
83
0
20
.2 52
.56
8.5
16
7
Ø17.2
Ø10.2
7.1
43
M5
Entrata 15
31.5
621.8
10
0
17
7 12
6
22
3
79
4
84
0
19
19
2154.751/180
Fitting kit
Technical drawings 18Technical drawings17
Handles
40
19
22.9
15.3
5.2
25.4
54.3
7.1
12.85.8
4.8
53.580Ø9.3
Ø9.
5
12.5
12.5
6.3
1.6
1.5
35
50
5.7
1.1
1.85
.34
2.2
12
56
.611
.9
10
5.2
29
.8
3.1
10
. 1
Ø9.
5
Ø9.3
Ø4.2
5.2
10
1.6 3
.11
0.1
6.3
1.5
35
50
40
19
22.9
15.3
5.2
25.4
54.3
7.1
12.85.8
4.8
4010
4
55
53.580
12.5
12.5
12
42
.25
.3
1.1
5.7
56
.6
30
11.9
29
.81
.8
2154.801/30 2154.801/60
5
50
34
3
27
M5
13
9
7
2061
124
866.3/7
124
Ø1030
1.5
21.5
43
60
02
7
866.4/7 874.3/7
60.5
52
Ø1030
127
1.5
21.5
43
60
7
874.4/7
Ø9.
5
Ø4.2
Ø9.3
40
19
22.9
15.3
5.2
25.4
54.3
7.1
12.8
5.84.8
4010
4
55
53.580
12.5
12.5
10
12
5.2
42
.2
1.1
56
.611
.9
30
29
.81
.8
5.3
5.7
6.3
1.5
35 50
1.6 3
.11
0.1
40
19
22.9
15.3
5.2
25.4
54.3
7.1
12.8
5.84.8
4010
4
305
5
53.5
Ø9.
5
Ø9.3
Ø4.2
80
12.5
12.5
10
5.2
1.6
6.3
1.5 35 50
3.1
10.1
12
1.8
56
.611
.92
9.8
5.7
1.1
42.2
5.3
2154.801/100 2154.801/180
2911
59.5
Ø9.8
131
38
M5
45
43
65
7
1610/7
Technical drawings 20Technical drawings19
Fitting kitFitting kit
Ø9.3
40
19
38.9
5.2
25.4
54.3
7.1
12.8
5.84.8
53.580
12.5
12.5
Ø9.
5
42
.25
.3
29
.811
.95
6.6
1.1
1.8
5.7
35
50
12
.3
3.1
9.2
6.3
1.5
12
5.2
10
Ø9.
5
5.2
10 9
.2 3.1
12
.3
6.3
12
42
.25
.3
5.7
56
.6
29
.811
.9 30
4
1.1
1.8
1.5 35
50
40
19
25.4
54.3
7.1
4010
55
53.580
12.5
12.5
38.9
5.2
12.85.8
4.8
Ø9.3
Ø4.2
2154.802/30 2154.802/60
25.4
54.3
Ø9.
5
Ø9.3
7.1
53.5
12.5
12.5
5.2
6.3
42
.25
.3
56
.611
.9 10
5.2
29
.8
5.7
1.1
1.8
12
0.8
35
50
3.1
10
.7
1.5
80
40
19
22.9
8
12,8
5.84.8
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.55.2
42
.25
.3
1.1
1.8
56
.611
.9
30
29
.8
5.7
12
6.3
1.5
5.2
10
0.8
35
50
3.1
10
.7
22.9
40
19
12.85.8
4.8
4012.8
4
55
53.580
12.5
8
2154.803/30 2154.803/60
40
19
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
4010
455
53.580
12.5
12.5
38.9
5.2
12.8
5.84.8
5.2
10
6.3
42
.25.3
56.6
30
11.9
29
.8
5.7
1.1
1.8
12
9.2 3.1
35
50
12.3
1.5
40
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
53.5
12.5
12.5
38.9
5.2
12.8
5.84.8
5.2
10
6.3
42
.25
.3
56
.6
30
11.9
29
.8
5.7
1.1
1.8
12
9.2 3.1
35
50
12
.3
1.5
19
4010
4
55
80
2154.802/100 2154.802/180
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.55.2
42.2
5.3
1.1
1.8
56
.611
.9
30
29
.8
5.7
12
6.3
1.5
5.2
10
0.8
35 50
3.1
10.7
22.9
12.85.8
4.8
53.5
12.5
40
19
4010
455
80
8
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.55.2
42
.25
.3
1.1
1.8
56.6
11.9
30
29
.8
5.7
12
6.3
1.5
5.2
10
0.8
35 50
3.1
10
.7
22.9
12.8
5.84.8
53.5
12.5
40
19
4010
455
80
8
2154.803/100 2154.803/180
Fitting kit
Technical drawings 22Technical drawings21
Fitting kit
40
19
31.5
24.6
5.2
25.4
54.3
7.1
12.8
5.8
4.8
53.5
80
12.5
12.5
42
.2
1.1
1.8
5.7
12
5.3
29
.8
56
.611
.9
5.2
10
6.3
1.5 3.6
3.1
35
50
12
.7
Ø9.3
Ø9.
5
40
19
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.8
5.84.8
4010
4
55
53.580
12.5
12.5
31.5
24.6
5.2
5.2
42
.25
.3
1.1
5.7
56
.62
9.8
11.9
30
1.8
6.3
1.5
50
35
12
3.6 3
.11
2.7
10
2154.804/30 2154.804/60
25.4
54.3
Ø9.
5
Ø9.3
5.8
10
53.5
80
12.5
22.7
5.2
42
.25
.3
1.1
5.7
56
.6
29.8
11.9
1.8
6.3
1.5
50
35
12
1.1
3.1
8.2
40
19
7.1
12.8
5,2
4.8
12.5 17.9
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
53.5
12.5
5.2
42
.2
12
5.2
5.3
1.1
5.7
56
.6
29
.811
.9
30
1.8
6.3
1.5
50
35
10
1.1 3
.1
8.2
7.1
12.5
17.9
40
19
12.8
5.84.8
4010
4
55
80
22.7
2154.811/30 2154.811/60
40
19
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.8
5.84.8
4010
4
55
53.5
80
12.5
12.5
31.5
24.6
5.2
5.2
42
.25
.3
1.1
5.7
56
.6
29
.811
.9
30
1.8
6.3
1.5
50
35
12
3.6 3
.11
2.7
10
40
19
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
7.1
12.8
5.84.8
4010
4
55
53.5
80
12.5
12.5
31.5
24.6
5.2
5.2
42.2
5.3
1.1
5.7
56
.6
29.8
11.9
30
1.8
6.3
1.5
50
35
12
3.6 3
.112
.710
2154.804/100 2154.804/180
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
53.5
12.5
5.2
42
.2
12
5.2
5.3
1.1
5.7
56
.6
29.8
11.9
30
1.8
6.3
1.5
50
35
10 1.1 3
.18
.2
7.1
12.5
17.9
12.8
5.84.8
22.7
40
19
4010
4
55
80
25.4
54.3
Ø9.
5
Ø9.3
Ø4.2
53.5
12.5
5.2
42
.2
12
5.2
5.3
1.1
5.7
56
.6
29
.811
.9
30
1.8
6.3
1.5
50
35
10 1
.1 3.1
8.2
7.1
12.5
17.9
12.8
5.84.8
22.7
40
455
80
40
19
10
2154.811/100 2154.811/180
Rollers and kit for sliding systems
Technical drawings 24Technical drawings23
Rollers and kit for sliding systems
2150.1 - 2151.1
A29624300
2156.12152.1
22.4
17.2
133
134
2
17.5
20.5
121.1
2203.1 2203.2
22.4
17.2
133
134
2
17.5
20.5
121.1
2150.4 - 2151.4 2156.4 2157.4
Suitability table of stainless steel multi-point closures (7.5 mm backset)
Applications 26Applications25
Suitability table of galvanized multi-point closures (7.5 mm backset)
Extruder ProfileKit x art.
2154.7/30Kit x art.
2154.7/60Kit x art.
2154.7/100Kit x art.
2154.7/180W
mmExport 60 S 2154.811/30 2154.811/60 2154.811/100 2154.811/180 31Export 65 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32Export 65 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31.5KS 50 2154.801/30 2154.801/60 2154.801/100 2154.801/180 30TRIALL.CO 65 S/TT - 90 S/TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32WOOD S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32
ETA 900 S/S TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32Serie 40000 2154,801/30 2154,801/60 2154,801/100 2154,801/180 32.5Serie 40600 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32TT SC 80 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32Domal 40 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 32DOMAL SLIDE 80/PA 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 31GOLD 650 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32GOLD 650 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32
METRA NC 60 INT 2154.801/30 2154.801/60 2154.801/100 2154.801/180 32SAPA Win90 S 2154.802/30 2154.802/60 2154.802/100 2154.802/180 31.5TO.MA. ATLANTIS 78 S/STT 2154.803/30 2154.803/60 2154.803/100 2154.803/180 31.5TP PROFILATI EKOS 60 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 32PROFILATI PE 60 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 30
Skeit 60 2154.811/30 2154.811/60 2154.811/100 2154.811/180 31.5Skeit 60 Super (anta 32 mm) 2154.811/30 2154.811/60 2154.811/100 2154.811/180 31.5Skeit 60 Super (anta 36 mm) 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31Skeit 60 Super TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31
PASSERINI
ALL.CO
ETNALL
HYDRO
INDINVEST
Suitability table of galvanized multi-point closures (15 mm backset)
Extruder ProfileKit x art.
2154.15/30Kit x art.
2154.15/60Kit x art.
2154.15/100Kit x art.
2154.15/180Kit x art.
2154.751/180W
mmExport 60 S 2154.811/30 2154.811/60 2154.811/100 2154.811/180 / 38.5Export 65 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 / 39.5Export 65 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39KS 50 2154.801/30 2154.801/60 2154.801/100 2154.801/180 / 37.5TRIALL.CO 65 S/90 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 / 39.5TRIALL.CO 65 TT/90 TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5WOOD S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5
ETA 900 S/S TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5Serie 40000 2154,801/30 2154,801/60 2154,801/100 2154,801/180 / 40Serie 40600 2154.804/30 2154.804/60 2154.804/100 2154.804/180 / 39.5TT SC 80 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5Domal 40 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 / 39.5DOMAL SLIDE 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 / 38.5DOMAL SLIDE PA 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 2154.803/180 38.5GOLD 650 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5GOLD 650 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5
METRA NC 60 INT 2154.801/30 2154.801/60 2154.801/100 2154.801/180 / 39.5SAPA Win90 S 2154.802/30 2154.802/60 2154.802/100 2154.802/180 2154.802/180 39TO.MA. ATLANTIS 78 S/STT 2154.803/30 2154.803/60 2154.803/100 2154.803/180 / 39TP PROFILATI EKOS 60 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 39.5PROFILATI PE 60 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 / 37.5
Skeit 60 / / / / / /Skeit 60 Super (anta 32 mm) / / / / / /Skeit 60 Super (anta 36 mm) 2154.804/30 2154.804/60 2154.804/100 2154.804/180 / 38.5Skeit 60 Super TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 2154.804/180 38.5
PASSERINI
ALL.CO
ETNALL
HYDRO
INDINVEST
Extruder ProfileKit x art.
2154.7/30XKit x art.
2154.7/60XKit x art.
2154.7/100XKit x art.
2154.7/180XW
mmExport 60 S 2154.811/30 2154.811/60 2154.811/100 2154.811/180 30Export 65 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31Export 65 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 30.5KS 50 2154.801/30 2154.801/60 2154.801/100 2154.801/180 29TRIALL.CO 65 S/TT - 90 S/TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31WOOD S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31
ETA 900 S/S TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31Serie 40000 2154,801/30 2154,801/60 2154,801/100 2154,801/180 31.5Serie 40600 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31TT SC 80 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31Domal 40 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 31DOMAL SLIDE 80/PA 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 30GOLD 650 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31GOLD 650 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31
METRA NC 60 INT 2154.801/30 2154.801/60 2154.801/100 2154.801/180 31SAPA Win90 S 2154.802/30 2154.802/60 2154.802/100 2154.802/180 30.5TO.MA. ATLANTIS 78 S/STT 2154.803/30 2154.803/60 2154.803/100 2154.803/180 30.5TP PROFILATI EKOS 60 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 31PROFILATI PE 60 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 29
Skeit 60 2154.811/30 2154.811/60 2154.811/100 2154.811/180 30.5Skeit 60 Super (anta 32 mm) 2154.811/30 2154.811/60 2154.811/100 2154.811/180 30.5Skeit 60 Super (anta 36 mm) 2154.804/30 2154.804/60 2154.804/100 2154.804/180 30Skeit 60 Super TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 30
PASSERINI
ALL.CO
ETNALL
HYDRO
INDINVEST
Extruder ProfileKit x art.
2154.15/30XKit x art.
2154.15/60XKit x art.
2154.15/100XKit x art.
2154.15/180XW
mmExport 60 S 2154.811/30 2154.811/60 2154.811/100 2154.811/180 38Export 65 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39Export 65 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 38.5KS 50 2154.801/30 2154.801/60 2154.801/100 2154.801/180 37TRIALL.CO 65 S/90 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39TRIALL.CO 65 TT/90 TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39WOOD S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39
ETA 900 S/S TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39Serie 40000 2154,801/30 2154,801/60 2154,801/100 2154,801/180 39.5Serie 40600 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39TT SC 80 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39Domal 40 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 39DOMAL SLIDE 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 38DOMAL SLIDE PA 80 2154.803/30 2154.803/60 2154.803/100 2154.803/180 38GOLD 650 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39GOLD 650 ST 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39
METRA NC 60 INT 2154.801/30 2154.801/60 2154.801/100 2154.801/180 39SAPA Win90 S 2154.802/30 2154.802/60 2154.802/100 2154.802/180 38.5TO.MA. ATLANTIS 78 S/STT 2154.803/30 2154.803/60 2154.803/100 2154.803/180 38.5TP PROFILATI EKOS 60 S 2154.804/30 2154.804/60 2154.804/100 2154.804/180 39PROFILATI PE 60 S 2154.801/30 2154.801/60 2154.801/100 2154.801/180 37
Skeit 60 / / / / /Skeit 60 Super (anta 32 mm) / / / / /Skeit 60 Super (anta 36 mm) 2154.804/30 2154.804/60 2154.804/100 2154.804/180 38Skeit 60 Super TT 2154.804/30 2154.804/60 2154.804/100 2154.804/180 38
PASSERINI
ALL.CO
ETNALL
HYDRO
INDINVEST
Suitability table of stainless steel multi-point closures (15 mm backset)
Extruder Profile
2150
.121
51.1
2156
.1
2152
.1
2150
.421
51.4
2156
.4
2157
.4
A29
6243
00
ALSISTEM GLOBAL 60 ALL.CO EXPORT 60 S ALL.CO EXPORT 65 S ALL.CO EXPORT 65 ST ALL.CO KS 50 ALL.CO KS 50 T ALL.CO TRIALL.CO 65 S ALL.CO TRIALL.CO 65 TT ALL.CO TRIALL.CO 90 S ALL.CO TRIALL.CO 90 TT ETA 900 S ETA 900 S TT ETA START 410 SCORREVOLE ETNALL SERIE 40000 ETNALL SERIE 40600 ETNALL TSC 80 HYDRO BUILDING SYSTEMS DOMAL 40 S INDINVEST GOLD 650 S INDINVEST GOLD 650 ST METRA NC 60 INT MORELLI MA 8700 PONZIO SLIDING 600 PROFILATI PE 60 S SAPA WIN 90 TP PROFILATI EKOS 60 S TP PROFILATI EKOS 60 STH TRAF. PASSERINI ALLUMINIO SKEIT 60 TRAF. PASSERINI ALLUMINIO SKEIT 60 SUPER TRAF. PASSERINI ALLUMINIO SKEIT 60 SUPER TT
Applications27
Roller range suitability table
Savio S.p.A.Via Torino, 25 (S.S. 25) - 10050 Chiusa S. MIchele (TO)
Tel. +39 011 964 34 64 - Fax +39 011 964 34 74www.savio.it - [email protected]
95
07
.87
6 -
RE
V. 0
- 2
31
01
17
![Proposal for ECE R17-08 Dynamic Backset Option with BioRID IIStatic Backset（HRMD) [mm] D y n a m i c b a c k s e t [m m] Normal Reactive Passive WHIPS Dynamic Backset shows correlation](https://static.fdocuments.in/doc/165x107/5e66ddc71feb642a177ac912/proposal-for-ece-r17-08-dynamic-backset-option-with-biorid-ii-static-backsetihrmd.jpg)
