Multi-Pass Filter Test Rig
2
FEC R World Class Testing Equipments An ISO 9001 Certified Co. Catalogue of Maltipass Test
-
Upload
fec2020 -
Category
Engineering
-
view
237 -
download
2
Transcript of Multi-Pass Filter Test Rig
FECR
World Class Testing EquipmentsAn ISO 9001 Certified Co.
Catalogue of Maltipass Test
The multi pass test stand is mainly used for testing the performance of hydraulic filters according to 4548 - 12 and ISO 16889 standards. These standards describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements are injected with continuous contaminant (tes dust), whereas online particle sensors measure the contamination, thus making the evaluation of filter elements performance possible. This test stand is automatically test report generated through software controlled by a computer chart and all the test parameters can be display on the screen. Data handling and generation of reports according to the standards mentioned above are included.
Multi Pass Test Stand (ISO 4548 - 12)
The test stand is designed as a Multi Pass Test Stand acc. to ISO 4548 - 12 and ISO 16889 as a part of the filter manufacturing and quality monitoring
Following tests can be performed with this test stand:?Determination of filtration performance of a filter elements?Determination of filtration performance of a flat sheet filter media which is optional?Determination of particle retention ability and contamination holding capacity of a filter element?Determination of differential pressure characteristics of a filter elements
www.fecproduct.com
The test stand is designed as a Multi Pass Test Stand acc. to ISO 19438 as a part of the filter manufacturing and quality monitoring center.
Following tests can be performed with this test stand?Determination of filtration performance of a filter element ?Determination of filtration performance of a flat sheet filter media which is opetional?Determination of particle retention ability and contamination holding capacity of a filter element?Determination lf differential pressure characteristics of a element
The multi pass test stand is mainly used for testing the performance of fuel filters according to ISO 19438 standards. These standard describe a method for determining the contaminant capacity, particle removal and differential pressure characteristics of filter elements. In order to determine such characteristics, filter elements are injected with continuous contaminant, whereas online particle sensors measure the contamination, thus making the evaluation of the filter elements performance possible. This test stand is automatically test report generated through
software controlled by a computer chart and all the test parameters can be displayed on the screen.
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990E-mail - [email protected]/ [email protected] Website - www.fecproduct.com
