MULTI-MILLION DOLLAR 3-DAY AUCTION Schrade...DENISON 1-TON MULTI PRESSES DAY ONE - October 26, 2004...

SALE SITE:

ELLENVILLE, NY

SALE DATES:TUESDAY, WEDNESDAY, THURSDAYOCTOBER 26, 27, 28, 2004

@10:00 AM (EST)

LARGEST OFFERING OF KNIFE AND TOOL MANUFACTURING EQUIPMENT IN AUCTION HISTORY!

MULTI-MILLION DOLLAR 3-DAY AUCTION

Under Management:

2414 Boston Post Rd.Guilford, CT 06437

Phone: (203) 458-0709 Fax: (203) 458-0727

www.thomasauction.com

HAAS VMC (2) VF-2; (2) VF-3; (6) "MINIMILLS"

New 200210 AVAILABLE

(14) HEINZ BERGER GRINDERSBEVEL-HOLLOW-ROTARY-GLAZING-CENTERLESS

New 2003

( 2 ) ROSLER FULLY AUTOMATED FINISHING SYSTEMS

New 1997

MITSUBISHI CNC WIRE EDM # FX-10K

New 1998

FEINTOOL CNC FINEBLANKING PRESSES

New 1998

(23) SIEPMANN GRINDERSFLAT/TAPER-SERRATION-HOLLOW-BACK EDGE PROFILE

New 19991 of 3

®

14 AVAILABLE

23 AVAILABLE

S A L E U N D E R M A N A G E M E N T O F : T H O M A S I N D U S T R I E S , I N C .

A U C T I O N B R O C H U R E C AT E G O R Y I N D E X

2

DAY 1CNC MACHINING CENTERS

EDMFEINTOOL FINEBLANKINGSTAMPING/ PRESS DEPT

TOOLROOMDRILLINGASSEMBLYWELDINGCAFETERIA

PLANT SUPPORT

DAY 2SIEPMANN CNC GRINDERS

BERGER CNC GRINDERSBLADE GRINDERS MISC

ROSLER FINISHING SYSTEMSPOLISHING

BELT SANDERSBUFFING/POLISHING

HEAT TREATINGMARKING/ENGRAVING

PLANT SUPPORTOFFICE-EQUIPMENT/FURNITURETRUCKS/VEHICLES/TRACTORS

DAY 3ANTIQUE KNIFE COLLECTION

WORLD RENOWNED IMPERIALSCHRADE PRODUCT LINES,INTELLECTUAL PROPERTY,

WORK-IN-PROGRESS,FINISHED GOODS INVENTORY ARE PRESENTLY AVAILABLE BY

PRIVATE NEGOTIATION.

IF NOT SOLD PRIOR TO OCTOBER15TH, ANY REMAINING PRODUCTLINES, WORK-IN-PROGRESS, AND

FINISHED GOODS INVENTORY WILLBE OFFERED AT THE AUCTION ONAUCTION DAY 1, OCTOBER 26TH AT 10:00 AM (EST). CHECK WITH

AUCTIONEER’S OFFICE FOR PRODUCT LINE INFORMATION,

TERMS AND CONDITIONS.

CATEGORY......................................................PAGE

AIR COMPRESSORS/AIR DRYERS..............16

ASSEMBLY/ORBITAL & STANDARD RIVETMACHINES ..............................................8

AUTOMATIC CUTTING &SPLICING MACHINE.............................15

BACKHOE ..................................................16

BALERS .......................................................16

BAR CODING EQUIPMENT ........................16

BERGER AUTOMATICSORTING SYSTEM .................................12

BERGER GRINDERS ....................................12

BLADE GRINDERS - MISC. .........................11

BLISTER PACKAGING.................................15

CAFETERIA ...................................................8

CENTRIFUGAL DRYER ................................15

CHILLERS/TEMPERATURE CONTROLLERS.....9

CNC MACHINING CENTERS -VERTICAL ................................................3

CUTTING & SPLICING MACHINES.............15

DIE CUTTERS...............................................15

DRILL PRESSES - RADIAL..............................7

DRILLING HORIZONTAL ...............................7

DUST COLLECTORS ......................................5

ELECTRIC DISCHARGE MACHINES .............3

FEINTOOL FINEBLANKING PRESSES .........13

FINISHING AUTO BUFFING ........................13

FINISHING BARRELS...................................13

FINISHING BUFFING/SANDING ................13

FINISHING SYSTEMS ..................................13

FINISHING SYSTEMS ROSLER.....................16

FLOOR SWEEPERS ......................................16

FORKLIFTS/SCISSOR LIFT - PALLET ...............5

FURNACE ELECTRIC.....................................7

GARDNER VERTICAL ROTARYDISC GRINDER......................................11

GRINDER TOOL & CUTTER ...........................7

GRINDERS DRILL POINT ...............................7

CATEGORY......................................................PAGE

GRINDERS - MISC........................................7

GRINDERS SURFACE ....................................7

HOT STAMPING - HEAT TREATING ............15

IMPERIAL SCHRADEKNIFE COLLECTION ..............................18

INDUCTION HEATERS ................................14

INJECTION MOLDING DEPARTMENT ........14

INSPECTION.................................................8

LATHES .........................................................6

MARKING/ENGRAVING ...........................14

MILLING MACHINES....................................6

OFFICE EQUIPMENT/OFFICE FURNITURE................................17

OVENS HEAT TREATING...............................9

PACKAGING MACHINE ............................15

PLANT SUPPORT.........................................17

PLASMA CUTTING SYSTEMS ........................6

PRESSES CLICKER ........................................9

PRESSES DROP HAMMERS...........................5

PRESSES HYDRAULIC ...................................5

PRESSES & OBI; S.S.S.C............................4, 5

PRESSES - MISC ...........................................5

PRODUCT LINES -IMPERIAL SCHRADE ...........................2, 8

ROBOT ABB .................................................8

SAWS............................................................6

SEWING MACHINES ....................................9

SHRINK WRAPPING MACHINES ................15

SIEPMANN CNC GRINDERS ................10, 11

SILK SCREEN ................................................9

STEP FEEDER SYSTEM .................................15

STRAIGHTENERS/UNCOILERS ......................4

STRETCH WRAPPER ....................................16

THERMOFORMING MACHINES .................14

TRUCKS & VEHICLES - TRACTORS .............15

ULTRASONIC WELDERS ..............................15

WELDERS ......................................................6

PRODUCT LINE INFORMATION

(6) HAAS "MINIMILL" VERTICAL MACHINING CENTERS(3) FEINTOOL

FINEBLANKING PRESSES -(NEW 1997-1998)

FEINTOOL FINEBLANKING PRESS, # MFA-2500CNC, 275 TON(2500KN), HYDRAULICCOUNTERWEIGHT (UPPER & LOWERTABLE) 30-1250 KN (3 TON-140 TON)POWER OF DRIVE MOTOR 30 KW (40. HP), NUMBER OF STROKES OF RAM20-80N/MIN-1, MAX MATERIAL THICKNESS10-12 mm (.39-.47), STROKE OF THE RAM64-67mm (2.5"-2.6"), S/N 982399 (1998)(SEE PHOTO)

(2) FEINTOOL FINEBLANKING PRESSES,# MFA-1600 CNC,175 TON(1600KN)HYDRAULIC COUNTERWEIGHT(UPPER &LOWER TABLE) 20-800 KN (2-90 TON),POWER OF DRIVE MOTOR 19.2 KW(25HP), NUMBER OF STROKES OF THERAM 20-80 N/MIN-1, MAX MATERIALTHICKNESS 6-8 mm (.24"-.32") 60 MM(2.4") STROKE, S/N 972388, 982397 (1997) (SEE PHOTO)

LARGE ASSORTMENT OF FEINTOOLSTAMPING TOOLING AND DIES FORPRODUCT LINES.

(10) CNC MACHININGCENTERS – VERTICAL

(NEW 1995-2001)(2) HAAS VERTICAL MACHINING CENTERS,

MODEL VF-3, 20 HP, 20 POS.ATC,TRAVELSX=40,Y=20, Z=25, CAT 40 SPINDLE,S/N 12322 (1997), 20 HP VECTOR DRIVE,710 IPM, S/N 6364 (1995), 15 HP HIGHTORQUE (SEE PHOTOS)

(2) HAAS CNC VERTICAL MACHINING CENTERS, MODEL VF-2, 20 POS.ATC,TRAVELS X=30,Y=16, Z-20, CAT 40 SPINDLE, S/N 18013 (1999), 20 HP VECTOR DRIVE, 710 IPM, S/N 4396(1995), 10 HP (SEE PHOTOS)

(6) 2000-2001 HAAS VERTICAL MACHININGCENTERS, MODEL MINIMILL, HAAS 4THAXIS ROTARY TABLE, 10 POS.ATC, RIGIDTAP, X=16,Y=10, 40 TAPER, 7.5 HP., 500IPM, 36" X 12" TABLE, S/N’S 22872, 22873 ,23937, 23938, 25239, 25261 (SEE PHOTOS)

FEINTOOL FINEBLANKING PRESS # MFA-1600-175 TON

A U C T I O N I N F O R M AT I O N : ( 2 0 3 ) 4 5 8 - 0 7 0 9 • E M A I L : g a v e l @ t h o m a s a u c t i o n . c o m

FEINTOOL CNC FINEBLANKING PRESSES # MFA -2500-275 TON

HAAS CNC VERTICAL MACHINING CENTER # VF-2

HAAS VERTICAL MACHINING CENTER # VF-3

D AY O N E - O c t o b e r 2 6 , 2 0 0 4 • S t a r t s a t 1 0 a m ( E S T )

3

New1998

New1995

1 of 2

1 of 2

1 of 2

New 1998

New 1997

New 2002

11-HAAS VMC

New2001

HAAS VERTICAL MACHINING CENTER # “MINIMILL”

New2001

1 of 6

HAAS 4TH AXISROTARYTABLE

COOPER & WEYMOUTH STRAIGHTENER

1 of 15

(31) PRESSES - OBIFEDERAL 100 TON OBI PUNCH PRESS, MODEL F-8, 2" STROKE, 28" X 36" BED,AC,W/ RAPID AIR FEED UNIT,

S/N 8-233 (1966) (SEE PHOTO)PERKINS 75 TON OBI PRESS,MODEL 700-B,2 1/2" STROKE,W/ SERVOMAX II FEED UNIT,AC,S/N 44819 (1980)

(SEE PHOTO)PERKINS 75 TON OBI PUNCH PRESS, MODEL 700-B, 2 1/2" STROKE,W/ RAPIDAIR FEED UNIT,AC, S/N 32158

(1964)FEDERAL 70 TON OBI PUNCH PRESS, 5" STROKE,W/ RAPID AIR FEED UNIT, S/N 6-638 (1965) FEDERAL 70 TON OBI PRESS, MODEL F6, 1.5" STROKE, 14.25" DIE SPACE, 75, SPM, AIR CLUTCH, S/N 6-615

(1965) (SEE PHOTO)FEDERAL 70 TON OBI PRESS, MODEL F6, 2" STROKE, 13" DIE SPACE, 75 SPM,AIR CLUTCH, S/N 6-605 (1962)FEDERAL 65 TON OBI PUNCH PRESS, MODEL 6, S/N 6-532 (1954) FEDERAL 37 TON OBI PUNCH PRESS, MODEL 4, 2" STROKE, S/N 4-1604 (1955) (2) BLISS 35 TON OBI PUNCH PRESSES, S/N H58220 (1967), S/N H59267 W/ RAPID AIR FEED UNIT FEDERAL 26 TON OBI PUNCH PRESS, REBUILT, LIKE NEW, S/N 3-1559 (SEE PHOTO)BLISS 25 TON OBI PUNCH PRESS, MODEL 21,W/ RAPID AIR FEED UNIT, S/N H20182BLISS 60 TON OBI PUNCH PRESS, MODEL 28 1/2M, S/N H-33447 (1951) BLISS 22 TON OBI PUNCH PRESS, MODEL C-22, S/N H-51494 (1962), 2 1/2" STROKE, DUAL PALM BUTTONS,

AC (SEE PHOTO)BLISS 22 TON OBI PUNCH PRESS, MODEL C-22, S/N H-46475,ACBLISS 10 TON PUNCH PRESS, S/N 2-687 BLISS 20 TON OBI PRESS, MODEL 19 BLISS 10 TON OBI PUNCH PRESS, MODEL 18BLISS 10 TON OBI PUNCH PRESS, MODEL 18MBLISS 10 TON OBI PRESS,MODEL 18-C,1.75" SLIDE ADJUSTMENT,1" STROKE,8.25" SHUT HEIGHT,AIR CLUTCH(2) PERKINS 15 TON PUNCH PRESSES, MODEL 300-B, 1.5" STROKE, AC, S/N’S 45395 & 45396 (1982) (SEE

PHOTO)(2) PERKINS OBI PUNCH PRESSES, MODEL 450, S/N 21113 & 2205 ROUSELLE 15 TON OBI PUNCH PRESS, MODEL 2,W/ ISB LIGHT CURTAINS,AC, S/N P-32024 (SEE PHOTO)V & O 12 TON OBI PUNCH PRESS, MODEL V-012V & O # 2 OBI PUNCH PRESS, S/N 201-8 (2) ALVA-ALLEN 12 TON OBI PUNCH PRESSES, MODEL BT-12, S/N K65J8041 & 113058040 STANDARD MACHINERY OBI PUNCH PRESS, MODEL 235 RACINE OBI PRESS, MODEL 516, HART COUNTER

FEDERAL 100 TON OBI PUNCHPRESS, # F-8, A.C.

PERKINS 75 TON OBI PRESS# 700-B A.C.

FEDERAL 70 TON OBIPRESS # F-6, A.C.

FEDERAL 26 TON OBI PRESS

BLISS 22 TON OBI PRESS # C-22 PERKINS 15 TON PRESS # 300-B ROUSELLE 15 TON OBI PRESS # 2

BLISS PUNCH PRESS # 24


4 S A L E U N D E R M A N A G E M E N T O F : T H O M A S I N D U S T R I E S , I N C .

LITTELL COIL FEED AND STRAIGHTENER # 412-7PD

(28) STRAIGHTENERS /UNCOILERS

(2) DURANT COIL FEED ANDSTRAIGHTENER, MODEL HDCC-6010, S/N 19812145 (1998); 89711978 (1999)

DURANT TOOL COIL FEED STRAIGHT-ENER, MODEL MD-10, S/N 870-58-8

DURANT UNCOILER, MODEL DMSC-1, S/N 1823

ROWE COIL FEED AND STRAIGHTEN-ER, MODEL B20-C4000J, .105"MAX THICKNESS, S/N 13837

ROWE COIL FEED STRAIGHTENER,MODEL B-15C2000, S/N 12544

ROWE COIL FEED STRAIGHTENER,MODEL B-10-C2000, S/N 5172

ROWE COIL FEED AND STRAIGHTEN-ING, MODEL A10-C2000, S/N 5550

LITTELL STRAIGHTENING MACHINE,MODEL 412-5PD, S/N 45661-51

LITTELL COIL FEED AND STRAIGHTEN-ER, MODEL 412-7PD, 125" CAP.,S/N 72973-63 (SEE PHOTO)

LITTELL STRAIGHTENING MACHINE,MODEL 408-C20, S/N 42815-50

(2) LITTELL PORTABLE UNCOILERS,1,000 LB CAP.

(15) COOPER & WEYMOUTHSTRAIGHTENER & UNCOILERUNITS (SEE PHOTO)

New1980

DENISON 1-TON MULTI PRESSES


5

1 of 10

MITSUBISHIWIRE EDM# DWC90C

MITSUBISHICNC WIREEDMMACHINE# FX-10K

AGIE EDM # MONDO-20

New 1998

New1993

New 1998


(4) EDM MACHINESMITSUBISHI CNC WIRE EDM MACHINE,

MODEL FX-10K, W/ CHILLER,S/N 58K10251 (1998) (SEE PHOTO)

MITSUBISHI WIRE EDM, MODEL DWC90C,MITSUBISHI CONTROLS, S/N 039D1152(1993) (SEE PHOTO)

ELOX-AGIE EDM, MODEL MONDO-20,FUTURA III CONTROL,S/N M20-THK-001041 (1998) (SEE PHOTO)

ELOX WIRE EDM, FANUC 200C CONTROL,S/N C-181095 (1981)

COOLEY ELECTRIC FURNACE # HS-1

(16) PRESSES – HYDRAULIC(3) DENISON 1-TON MULTI PRESSES, MODEL

WVA-1TR (SEE PHOTO)(2) DENISON 1-TON MULTI PRESSES, MODEL

W3A-1, S/N M-3898-2 (1993); M-3898-1(1993)

(2) DENISON 1 TON MULTI PRESSES, MODELWUPA-1TR, 3" STROKE, S/N 5593 & 6028,

DENISON 1-TON MULTI PRESS, MODEL WUA-1TR, S/N 30192

(2) DENISON 1-TON MULTI PRESSES, MODELA, S/N’S 2597 & 2363

CLIFTON 400 TON, HYDRAULIC PRESS,MODEL 400H, 11" X 14" PLATEN, S/N 0733(1965)

WATERBURY FARRELL 4-POST HYDRAULICPRESS

RODGERS 100 TON HYDRAULIC PRESS,MODEL 4S-100, S/N 342896

(2) STARION HYDRAULIC ASSEMBLY PRESSES,MODEL PRN-2000, S/N’S S-7582; S-7583

SOMANLE INTERNATIONAL HYDRAULICPRESS, MODEL MX-5X231FFAS

(17) PRESSES - S.S.S.C.(7) BLISS S.S.S.C PRESSES, MODEL 22,

S/N’S 29249, 29248, 33473, 33472,28803, 5569

BLISS S.S.S.C. MODEL 23A PUNCH PRESSBLISS S.S.S.C. PUNCH PRESS, MODEL 24,

S/N 33530 (SEE PHOTO)BLISS S.S.S.C PRESS, MODEL 505 (3) STANDARD MACHINERY S.S.S.C. PUNCH

PRESSES (2) LUNDWALL MACHINES, MODEL 5J-AC

S.S.S.C PRESSES, W/ RAPID AIR FEED UNIT,AC, S/N’S 425, 426

EMILLINDE S.S.S.C. PRESS, MODEL D88,S/N 12261

FURNACE – ELECTRICK.H. HUPPERT OVEN, MODEL ST, SLIDING

DOOR, S/N 1508COOLEY ELECTRIC FURNACE, MODEL HS-1,

W/ CONTROLS, S/N A-974 (SEE PHOTO)COOLEY ELECTRIC FURNACE, MODEL HS-2,

W/ CONTROLS (2) ELECTRIC OVENS

PRESS - HORNFERRACUTE HORN PRESS, MODEL P-3

(18) PRESSES - DROP HAMMERS

(5) PNEUMATIC DROP HAMMERS, MODEL D,S/N 586R, 199, 769,449, 444, W/ ELECTRONIC FEED CONVEYORS

(3) PNEUMATIC DROP HAMMERS, S/N’S 553,670, 630

(7) STANDARD MACHINERY BELT LIFT HAMMERS, MODEL NO. 1/2

(3) STANDARD MACHINERY BELT LIFT HAMMERS, MODEL NO. 1

(90) PRESSES – MISC(32) STANDARD MACHINERY ASSEMBLY

PRESSES, MODEL 0(10) STANDARD MACHINERY #0 PRESSESBEE COMPANY COATED FILM PRESS, MODEL

70, S/N 63 PEERLESS HOT PLATEN FILM PRESS, MODEL

3000-7T, S/N 113E LEMPCO 40 TON H-FRAME PRESS, MODEL

500A, 32" BETWEEN UPRIGHTS, S/N 2191FERRACUTE PRESS, MODEL E-53(40) KICK PRESSES, VARIOUS

MANUFACTURERS: EXCELSIOR,STANDARD, EDDY & WATERBURY FARRELL

(4) CUSTOM MANUFACTURED STAMPINGPRESSES, PNEUMATIC CONTROLLED W/ COUNTER

(12) MILLING MACHINES -VERTICAL

(3) BRIDGEPORT SERIES I MILLING MACHINES, 2 HP, 9" X 48" TABLE, DRO,POWER FEED, S/N’S 298901, 298844 &216313 (SEE PHOTO’S)

(2) BRIDGEPORT SERIES I MILLINGMACHINES, 2 HP, 9" X 42" TABLE, DRO,POWER FEED, S/N’S 271076 & 204495

BRIDGEPORT MILLING MACHINE, 1.5 HP,9" X 48" TABLE, POWER FEED, S/N 181600

BRIDGEPORT MILLING MACHINE, 1 HP,9" X 48" TABLE, S/N 42969

BRIDGEPORT MILLING MACHINE, 1 HP,9" X 36" TABLE, S/N 64135

BRIDGEPORT 1 HP ROUND ARM VERTICALMILLING MACHINE, ANILAM DRO,9" X 36" POWER FEED TABLE, VISE,S/N 24532

ENCO MILLING AND DRILLING MACHINE,MODEL 91034, S/N BU-16-0244

ENCO MODEL 105 MILLING MACHINE,S/N 137916

JET 3 HP VERTICAL MILLING MACHINE,9" X 42" TABLE, S/N K3V972318,

(8) MILLING MACHINES -HORIZONTAL

(2) KENT OWENS HORIZONTAL MILLINGMACHINES, MODEL 1-14, 1609, POWERFEED TABLE

CINCINNATI HORIZONTAL MILLINGMACHINE, MODEL 2MH, W/ VISE,S/N 5A2P1L-641

(2) NICHOLS HAND MILLS, S/N 8F-8238 & N/A

PRATT & WHITNEY HORIZONTAL MILLINGMACHINE

STANDARD HORIZONTAL MILLING MACHINE, MODEL 1 1/2

VAN NORMAN HORIZONTAL MILLER,MODEL 22-L

SCREW MACHINE - AUTOMATIC

BROWN & SHARPE AUTOMATIC SCREWMACHINE, MODEL 00G, S/N 4213

(6) SAWS - CUT-OFF(3) CUSTOM MANUFACTURED DUAL

SPINDLE CUT-OFF MACHINES, PNEUMATICCONTROLLED

(3) CUSTOM MANUFACTURED CUT-OFFMACHINES, PNEUMATIC CONTROLLED

PORTER-MCLEOD CUT-OFF SAW

SAWS - VERTICAL BANDPOWERMATIC VERTICAL BAND SAW, MODEL

89, 19" THROAT, W/ GRIND AND WELDATTACHMENT, S/N 089047

DO-ALL VERTICAL BANDSAW, MODEL ML,S/N 5115854

DELTA VERTICAL BANDSAW ROCKWELL VERTICAL BANDSAW

(7) WELDERSMILLER WELDER, MODEL SR-300-32, S/N 70-

547733 (3) LINCOLN IDEAL ARC WELDERS, MODEL

250, W/ WIRE FEED MILLER WELDER, MODEL DIALARC HF-P CENTURY WIRE FEED MIG WELDER, MODEL

117-037, 200 AMPLINDE WELDER, MODEL 230

PLASMA CUTTING SYSTEMSSIP PLASMA CUTTING SYSTEM, MODEL 15 HYPERTHERM CUTTING TORCH SYSTEM,

MODEL POWERMAX 350,

SAWS - HORIZONTAL BANDCLAUSING STARTRITE HORIZONTAL BAND-

SAW, MODEL HB-250M, S/N 133580 (SEE PHOTO)

ROCKWELL DELTA HORIZONTAL BANDSAW,MODEL 20-916, S/N 1780159

KALAMAZOO HORIZONTAL BANDSAW,MODEL 9AW, S/N 5564

LATHE - TURRETCOSEN HAND TURRET LATHE, MODEL

LHT-25B, S/N 2591318 (1994)

(12) LATHESLEBLOND 15" X 54" ENGINE LATHE, MODEL

12C, W/ DRO, S/N 12C-1400 (SEE PHOTO)NARDINI 17" X 80" ENGINE LATHE, MODEL

ND-1585E, S/N 014015020 (SEE PHOTO)KERN 22" X 60" ENGINE LATHE, MODEL

DS-22AL, S/N 3200CAZENEUVE 15" X 48" LATHE, MODEL 360

HBX, 4-JAW CHUCK, TOOLPOST,S/N 983V12

WILTON 12" X 36" LATHE, MODEL 7L-1236-1,THREADING, S/N 9002005 (SEE PHOTO)

SOUTHBEND 14" X 50" LATHE, MODEL CL-1450, S/N 15383T

SOUTHBEND 10" X 36" BENCH LATHE,MODEL CL8187RB, S/N 23116R

SOUTHBEND 10" X 30" BENCH LATHE,S/N 14064RKX16

SOUTHBEND 10" X 20" BENCH LATHE,S/N 34RKL

HARDINGE BENCH LATHE TRUMP-ACER 12" X 33" LATHE, MODEL 1233,

S/N 4164615 (1993)



WILTON 12" X36" LATHE

NARDINI 17" X 80" ENGINE LATHE

LEBLOND 15" X 54" ENGINE LATHE

BRIDGEPORT SERIES I MILLING MACHINE, 2 HP

New 1996


7

HERCULES-FAVRETTO HYDRAULIC SURFACE GRINDER, 20” X 28” CAP

CHEVALIER HYDRAULIC SURFACE GRINDER # FS6-1224-AD

ORBITFORM DUAL ASSEMBLY PRESS, # B-250, W/ COMCO 6-POSITION

ROTARY TABLE

TAUMEL ORBITAL RIVETING ASSEMBLY PRESSES, # T-251

New1998

New1997

1 of 4


GRINDER - TOOL & CUTTERK.O. LEE TOOL & CUTTER GRINDER, MODEL BA-960-BB, S/N 17331,

W/ MOTORIZED WORK HEAD AND TOOLING

GRINDERS - DRILL POINTBLACK DIAMOND DRILL GRINDER, MODEL KC-994, S/N 16209 GHA DRILL POINT GRINDER

(11) GRINDERS – MISCFORTUNA GRINDING MACHINE, MODEL FOR-V50K, S/N 69937 (2) HARDCORE ABRASIVE GRINDING MACHINES (2) 15" GRINDING MACHINES, W/ COOLANT, PNEUMATIC FIXTURES(3) CUSTOM MANUFACTURED TURRET GRINDERS, 12-POSITION

TURRET, 1.5/2 HP(3) CUSTOM BUILT GRINDERS, W/ TROL-BAR AUTO START SYSTEMS,

(NEW 2003)

(28) GRINDERS - SURFACECHEVALIER HYDRAULIC SURFACE GRINDER, MODEL FS6-1224AD,

W/ 12" X 24" MAGNETIC CHUCK, COOLANT SYSTEM, PAPER FILTRATION SYSTEM, S/N F-186C001 (1997) (SEE PHOTO)

ACER SURFACE GRINDER, MODEL AGS-1020AH, W/ 10" X 18"CHUCK, AND COOLANT SYSTEM, S/N 308352 (1993) (SEE PHOTO)

ACER SURFACE GRINDER, MODEL AGS-618, W/ 6 X 18" MAGNETICCHUCK, S/N 9222-160 (1992)

HARIG SURFACE GRINDER, MODEL 618W, MAGNETIC CHUCK,COOLANT SYSTEM, S/N 4644-W

BROWN & SHARPE SURFACE GRINDER, MODEL 510, W/ 5" X 10"MAGNETIC CHUCK, S/N 523-510-1376

DO-ALL HYDRAULIC SURFACE GRINDER, MODEL D-8, 8" X 24"CHUCK, COOLANT SYSTEM, S/N 38-54545

REID SURFACE GRINDER, 6" X 18" BROWN & SHARPE PERMANENTMAGNETIC CHUCK

(13) NORTON 6" X 18" SURFACE GRINDERS, AUTO FEED TABLEGARDNER SURFACE GRINDER, S/N 861-6, 10" X 16", W/ MAGNETIC

CHUCK HARTFORD SURFACE GRINDER, WALKER 6" X 18", W/ PERMANENT

MAGNETIC CHUCK THOMPSON 6" X 18" SURFACE GRINDER, MAGNETIC CHUCK,

COOLANT SYSTEM ABRASIVE SURFACE GRINDER, 6" X 12" CHUCKABRASIVE #1 1/2 SURFACE GRINDER, 6" X 18" CHUCKGARDNER #1 1/2 SURFACE GRINDER, W/ 10" X 16" CHUCKHERCULES-FAVRETTO HYDRAULIC SURFACE GRINDER, MODEL TB-70,

20" X 28" MAGNETIC CHUCK, COOLANT SYSTEM, S/N 731-3(1967) (SEE PHOTO)

DO-ALL HYDRAULIC SURFACE GRINDER, MODEL G-10, W/ 8" X 24"CHUCK, COOLANT SYSTEM

DRILLING - HORIZONTAL(6) CUSTOM MANUFACTURED DUAL SPINDLE HORIZONTAL DRILLING

MACHINES, PNEUMATIC FIXTURE

DRILL - RADIAL ARMCINCINNATI BICKFORD 3' X 9" RADIAL ARM DRILL, BOX TABLE,

S/N SR-40

(55) DRILL PRESSES(15) CLAUSING #15 DRILL PRESSES, MODELS: 1765, 1759, 1757, 1735,

1660, 1621 & 1614 (NEW 1990’S) (22) ROCKWELL/DELTA DRILL PRESSES, MODELS: 15-081, 15-665,

17-600, 15-080, 45-665, 14-070(3) LINCOLN DRILL PRESSES, MODEL RL88-DP333J, BENCH TYPE(4) MANHATTAN DRILL PRESSES, MODEL 951215, BENCH TYPE(2) YUASA DRILL PRESSES, MODEL AX-14, BENCH TYPE, S/N 521466,

521516 HAMMER HIGH SPEED DRILL PRESS, MODEL R53, S/N A34530 ORBIT DRILL PRESS, MODEL OR-1412, 5-SPEED, BENCH TYPE, S/N 186SOUTHBEND 4-SPINDLE PRODUCTION DRILL PRESS, MODEL

R014F3AC PACKARD DRILL PRESS, MODEL HD-9S, MULTI SPINDLE DRILLING

ATTACHMENT (1977)PACKARD PRECISION PEDESTAL DRILL PRESS, MODEL 120F-IND, MULTI

SPINDLE DRILL PACKARD PRECISION DRILL PRESS, MODEL HD-9S,S/N 98137 (1977)

DURACRAFT PEDESTAL DRILL PRESS, MODEL FM-1617 (1979)AMERICAN DRILL PRESS, MODEL 660, S/N 007145 WALKER TURNER DRILL PRESS, MODEL 12

THOMAS INDUSTRIES APPRAISAL DIVISIONAccurate appraisals supported by over 55 years of conductingworldwide auctions and liquidation’s. Call Thomas Gagliardi, III

ASA at (203) 458-0709 for a confidential appraisal of your assets.One piece Of equipment or an entire plant.

ROCKWELL DIGITAL HARDNESSTESTER # 3YR


8

ROBOT – ABB ABB ROBOT, W/ CONTROLS AND ENCLOSURE,

S/N 206487 (NEW 2002) (SEE PHOTO)

(70+) ASSEMBLY/ORBITAL & STANDARDRIVET MACHINES

(4) AFT RIVETING MACHINES, MODEL P250-P, W/ VIBRATORY BOWLFEEDERS

AFT ASSEMBLY MACHINE, MODEL P250-B, W/ VIBRATORY BOWLFEEDERS, DIGITAL COUNTER

(12) AFT DUAL RIVET ASSEMBLY MACHINES, MODEL P125,W/ VIBRATORY BOWL FEEDERS (SEE PHOTO)

AFT DUAL HEAD ASSEMBLY PRESS, MODEL ISC300, W/ COMCO 6-POSITION ROTARY TABLE (SEE PHOTO)

AFT ASSEMBLY PRESS, MODEL ISC400, W/ COMCO 6-POSITIONROTARY TABLE, S/N 701002

VSI MULTIHEAD ASSEMBLY STATION, MODEL 470T, 4 HEAD, PC CONTROL, 6 POSITION TABLE

VSI MULTIHEAD ASSEMBLY STATION, MODEL CH18, 6 HEAD,8 POSITION TABLE, VSI ORBITAL HEAD, MERLIN SAFETY EYE

VSI ASSEMBLY PRESS, MODEL TM-20, DIGITAL COUNTER (1998)(18) VSI AUTOMATION ORBITAL RIVETING MACHINES, MODEL TM-10,

MID 80’S TO LATE 90’S (SEE PHOTO)SPINNOMATIC ORBITAL RIVETING MACHINE, MODEL TM-10,ORBITFORM DUAL ASSEMBLY PRESS, MODEL B-250, W/ COMCO

6-POSITION ROTARY (1998) (SEE PHOTO)(3) WEBER ORBITAL RIVITERS, CUSTOM, 1/3 HP DAYTON, DIGITAL

COUNTERBLACK & WEBSTER RIVETING MACHINE, MODEL SAF-6(4) TAUMEL ORBITAL RIVETING ASSEMBLY PRESSES, MODEL T-251

(SEE PHOTO)(3) MILFORD DUAL POSITION RIVET, MACHINES MODEL 55-DP(3) MILFORD DUAL POSITION RIVET, MACHINES MODEL S-91 MILFORD DUAL RIVET MACHINE, W/ (2) SYNTRON PARTS FEEDERSVISUMATIC SCREWDRIVING MACHINE, MODEL 94 W/ CLECO

COOPER ARM, PARTS FEED BOWL (2001)TOWNSEND DUAL POSITION RIVET MACHINE, MODEL 133S

OVER (30) VARIOUS, RIVET AND ASSEMBLY MACHINES,CUSTOM MANUFACTURED

INSPECTIONROCKWELL DIGITAL HARDNESS TESTER, SERIES 2000, MODEL 3YR,

INSTRON HEAD, W/CABINET & PRINTOUT, S/N 2001T-C3151 (NEW 2001) (SEE PHOTO)

ROCKWELL HARDNESS TESTER, MODEL 3YR, S/N 484 (NEW 2002)

CAFETERIACOMMERCIAL GRADE CAFETERIA EQUIPMENT INCLUDING:

(2) GARLAND 4-BURNER/OVENS, 3-COMPARTMENT S.S. SINK, S.S.COFFEE POTS, APPROX. (40) TABLES AND CHAIRS, EMERSONMICROWAVE, FRIGIDAIRE REFRIGERATOR, MICROWAVES,WHIRLPOOL REFRIGERATOR, S.S. 3-DOOR REACHIN REFRIGERATOR, ETC.

PRODUCT LINES IMPERIAL SCHRADE

PLEASE NOTE ALL OF THE PRODUCT LINES, IMPERIAL SCHRADENAME, INTELLECTUAL PROPERTIES AND INVENTORY, TOOLING,

DIES, JIGS AND FIXTURES ARE AVAILABLE FOR PRIVATENEGOTIATION. IF NOT SOLD BY OCTOBER 15, 2004 THESE ITEMS

WILL BE OFFERED AT THE AUCTION ON DAY 1 (OCT 26TH) ASTHE FIRST LOTS STARTING AT 10:00 AM (EST). CHECK WITH

AUCTIONEER’S OFFICE FOR AVAILABILITY, DETAILED LISTING,TERMS AND CONDITIONS.


AFT DUALRIVET ASSEMBLYMACHINE # P125

VSI AUTOMATION ORBITAL RIVETING MACHINES # TM-10

AFT DUALHEAD

ASSEMBLYPRESS

# ISC300, W/ COMCO

6-POSITIONROTARY INDEX

TABLE

1 of 12

1 of 18 New2001

New2002

DURKOPP-ADLER SEWING MACHINES JUKI SEWING MACHINES

D AY T W O - O c t o b e r 2 7 , 2 0 0 4 • S t a r t s a t 1 0 a m ( E S T )

9

1 of 15 1 of 2


CHILLERS/TEMPERATURECONTROLLERS

PROCESS COOLING WATER CIRCULATIONCHILLER

BUDZAR CLOSED LOOP WATER CHILLER,PORTABLE

BUDZAR MOLD CHILLER AEC TEMP CONTROLLER, MODEL

TDC-1C-Q, S/N 861114

DRYER/TEMPERATURE CONTOLLERS

THORESON MCCOSH DESICCANT DRYER,MODEL TD-40, W/ HOPPER AND VACU-UM LOADER, S/N 91-05-258, (SEE PHOTO)

AEC TEMPERATURE CONTROLLER,MODEL TDC-1C-Q, S/N 86114

SILK SCREEN - DRYING OVENS

AMERICAN UV DRYER, MODEL C38/300 A & M CONVEYOR DRYING OVEN LAWSON PRO CURE OVEN

SILK SCREEN - EXPOSURE UNIT

NUARC MERCURY EXPOSURE UNIT, # 32-1K

(16) OVENS - HEAT TREATING

C.I. HAYES ELECTRIC BELT TYPE FURNACE,MODEL BAC, 1800 DEGREES F, 150 KWS/N 16846 (SEE PHOTO)

CAN-ENG BELT TYPE FURNACE, QUENCHAND WASH, 1800 DEGREES, 440/3/60,S/N 94714-5-6 (NEW 1994) (SEE PHOTO)

C.I. HAYES ELECTRIC BELT TYPE FURNACE,MODEL BACM, TEMP 2100 DEGREES F,170 KW, S/N 13126

IPSEN GAS FIRED OVEN, MODEL T-400-AEM,W/ HONEYWELL TRU-LINE, UPDATED CONTROLS, S/N 13902

(2) IPSEN GENERATORS, MODEL G-1500-E,S/N’S 58313 & 58337 (1980),(1800 DEGREES F) (SEE PHOTO)

LEEDS-NORTHRUP HOMO FURNACE,S/N 416975

(3) WESTINGHOUSE HOMO FURNACES,W/ STEEL PLATFORM

WESTINGHOUSE ELECTRIC FURNACE, MODELSHAKER HEARTH, (1700 DEGREES F),S/N PV-64430-F1

WESTINGHOUSE ELECTRIC FURNACE MODELA2-152, S/N PV694301, 25 KW, 220/1/60

(2) GENERAL ELECTRIC AIR DRAW FUR-NACES, 25 KW, 1200 DEGREES,S/N’S 40X651872 & 5364772-G1

JOHNSON GAS OVEN, S/N 70B

(20) SEWING MACHINES (15) JUKI SEWING MACHINES, VARIOUS

MODELS: DNU-241HS, DNU-241H-7,DLN-5410-7, LK-1852C DDL-5600N-7,LH-3178, LK-1900, DNU-241-5 & DDL-55ON (SEE PHOTO)

(2) DURKOPP-ADLER SEWING MACHINES,MODEL K504-437564 (SEE PHOTO)

(2) SINGER SEWING MACHINES,VARIOUS MODELS

PRESSES - CLICKER(3) FREEMAN CLICKER PRESSES, MODEL

SE20C, S/N’S 21A073476; 21A073302,21A073601 (SEE PHOTO)

SILK SCREEN - PRINTERSPRINTEK 6/C SILK SCREEN PAD PRINTER,

MODEL PK66VT (1993) (SEE PHOTO)PRINTEK AUTOMATIC SCREENING 4/C

SILK SCREEN PAD PRINTER,MODEL 604AT (1992)

A & M 6-POSITION SILK SCREEN MACHINE,S/N 1185

THORESON MCCOSH DESICCANT DRYER # TD-40

C.I. HAYES ELECTRIC BELT TYPE FURNACE # BAC, 1800°

FREEMAN CLICKER PRESSES # SE20C

1 of 3

PRINTEK 6/C SILK SCREEN PADPRINTER # PK66VT

New1993

IPSEN GENERATOR # G-1500-E

1 of 2

CAN-ENG BELT TYPE FURNACE, QUENCH AND WASH, 1800°

New1994

(8) SIEPMANN – CNC FLAT & TAPER GRINDERS (NEW 1991-1999)SIEPMANN CNC FLAT & TAPER GRINDING MACHINES, MODEL GM-3, MAX GRINDING LENGTH 360 mm ( 14"), CROSS TRAVEL 25 mm (1"),

15-30 HP, S/N 3258 (1999) (SEE PHOTO)SIEPMANN DUAL PLC FLAT & TAPER GRINDING MACHINE, MODEL GM2-H8-B1, MAX GRINDING LENGTH 200 mm (8"), CROSS TRAVEL 25

MM (1"), 7.5 -15 HP W/ (2) SYSTEM LAUER CNC CONTROLS, CENTRAL ROBOTIC TRANSFER, S/N 3113 (1996) (SEE PHOTO)SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE, MODEL GM3-CNC, MAX GRINDING LENGTH 360 mm ( 14"), CROSS TRAVEL

25 mm (1"), 15-30 HP (2) SIEMENS SINUMERIK CNC CONTROLS, S/N 3096 (1996) (SEE PHOTO)SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE, MODEL GM2-CNC-BA-433, MAX GRINDING LENGTH 200 mm (8"), CROSS

TRAVEL 25 mm (1" ), 7.5 -15 HP W/ (2) SIEMENS SINUMERIK CNC CONTROLS, (1) CENTRAL ROBOTIC TRANSFER SYSTEM,S/N 3076-1 (1995) (SEE PHOTO)

SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE, MODEL GM2-CNC-BA-43-S, MAX GRINDING LENGTH 200 mm (8"), CROSSTRAVEL 25 mm (1"), 7.5 -15 HP., S/N 3076-2, (2) SIEMENS SINUMERIK CNC CONTROLS, CENTRAL ROBOTIC TRANSFER SYSTEM,S/N 3076-2 (1995)

SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE, MODEL GM3-CNC-BA43, MAX GRINDING LENGTH 360 mm ( 14"), CROSS TRAV-EL 25 mm (1"), 15-30 HP(2) SIEMENS SINUMERIK CNC CONTROLS, CENTRAL ROBOTIC TRANSFER SYSTEM, S/N 3029 (1994) (SEE PHOTO)

SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE, MODEL GM3-CNC, MAX GRINDING LENGTH 360 mm ( 14"), CROSS TRAVEL25 mm (1"), 15-30 HP(2) SIEMENS SINUMERIK CNC CONTROL, S/N 2994 (1993)

SIEPMANN DUAL PLC FLAT & TAPER CNC GRINDING MACHINE, MODEL GM3-H-B1, MAX GRINDING LENGTH 360 mm ( 14"),CROSS TRAVEL 25 mm (1"), 15-30 HP., LAUER PLC CONTROLS, CENTRAL ROBOTIC TRANSFER SYSTEM, S/N 2907 (1991)

(5) SIEPMANN – CNC SERRATION AND PROFILE GRINDERS (NEW 1996-1998)(4) SIEPMANN CNC SERRATION AND PROFILE GRINDING MACHINES, MODEL WS-2-CNC, MAX GRINDING WIDTH 210 mm (8"), GRINDING

DRIVE 10 HP, L= 1500 mm X 3300 mm X 2100 ( 59" X 130" X 83" ), SIEMENS SINUMERIK CNC CONTROL, S/N’S 3204-2, 3204-1 (1998),S/N 3164 (1997) (SEE PHOTO), S/N 3130 (1996)

SIEPMANN CNC SERRATION & PROFILE GRINDING MACHINE, MODEL WS-2-CNC, MAX GRINDING WIDTH 210 mm (8"), GRINDING DRIVE10 HP, L= 1500 mm X 3300 mm X 2100 ( 59" X 130" X 83" ), SIEMENS SINUMERIK CNC CONTROL, VERTICAL AXIS, RECONDITIONED ANDUPGRADED 2001, S/N 3167 (1997)

SIEPMANN DUAL CNC GRINDINGMACHINE # GM3-CNC

SIEPMANN DUAL PLC GRINDING MACHINE # GM2-H8-B1

(23) SIEPMANN GRINDERS FLAT/TAPER-SERRATION-HOLLOW-BACK EDGE PROFILE

SIEPMANN CNC SERRATION & PROFILEGRINDER # WS-2-CNC

SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE # GM3-CNC-BA43

SIEPMANN DUAL CNC FLAT & TAPER GRINDING MACHINE # GM2-CNC-BA-433


10

New1996

New1995

New1996

New1997

New1994

New 1999

1 of 23


(5) SIEPMANN – CNC HOLLOW GRINDERS (NEW 1992-1998)

(2) SIEPMANN CNC HOLLOW GRINDINGMACHINES, MODEL HS1-CNC, MAXGRINDING LENGTH 150 mm (6"), MAXVERTICAL STROKE 100 (4") 7.5 -10 HP,SIEMENS SINUMERIK CNC CONTROL,S/N 3205 (1998) (SEE PHOTO), S/N 3193(1997)

(3) SIEPMANN CNC HOLLOW GRINDINGMACHINES, MODEL HS-25-10, SYSTEMLAUER CONTROL, S/N 3033 (1994), S/N 3012(1993), S/N 2948 (1992) (SEE PHOTO)

(6) SIEPMANN – CNC BACK EDGE &

PROFILE GRINDERS (NEW 1992-1996)

(2) SIEPMANN CNC BACK EDGE & PROFILEGRINDING MACHINES, MODEL RS-1-CNC, SIEMENS SINUMERIK CNC CON-TROL (CRT), S/N 3112 (1996) (SEEPHOTO), S/N 2990 (1993) (SEE PHOTO)

(4) SIEPMANN CNC BACK EDGE & PROFILEGRINDING MACHINES, MODEL RS-2-CNC, SIEMENS SINUMERIK CNC CON-TROL (CRT), S/N 3107 (1996), 3045 (1994) (SEE PHOTO), 2986, 2937 (1992)

INTERAMCO/HEINZ BERGER CNC SIDE BEVEL GRINDER# BG-1-CNC-DA-R

SIEPMANN CNC BACK EDGE & PROFILE GRINDER # RS-2-CNC

SIEPMANN CNC BACK EDGE & PROFILE GRINDER # RS-1-CNC

SIEPMANN CNC HOLLOW GRINDER # HS-25-10 SIEPMANN CNC HOLLOW GRINDER # HS-1-CNC


11

New1998

New1993

New1994

New2000

New1993

GARDNER VERTICALROTARY DISC GRINDER

(2) GARDNER VERTICAL DISC GRINDERS,MODEL 2V18-24, S/N 877-23 (1997), (1994) (SEEPHOTO)

(124) BLADE GRINDERS -MISC

(56) HEMMINGS BLADE GRINDERS, POWERFEED, COOLANT, 7.5 HP

(5) HEMMINGS BLADE GRINDERS, OPTIMATEDIGITAL CONTROL, COOLANT, 7.5 HPMOTOR

(4) NICHOLAS BLADE GRINDERS, MODELHG, S/N 411-655-16, N/A

(6) HEMMINGS BLADE GRINDERS, W/ ALLENBRADLEY DIGITAL CONTROL, POWERFEED, COOLANT, 7.5 HP

(5) HEMMINGS BLADE GRINDERS, OPTIMATEDIGITAL CONTROL, POWER FEED,COOLANT, 7.5 HP

KUGEL MULLER VERTICAL DISC GRINDER (11) CUSTOM MANUFACTURED CENTERLESS

BLADE GRINDERS, (2) 1.5 HP MOTORS(6) CUSTOM MANUFACTURED SERRATING

GRINDERS, W/ PNEUMATIC FEED FIXTURE,COOLANT

(10) CUSTOM MANUFACTURED 1.5"-6"GRINDING STATIONS

(20) CUSTOM MANUFACTURED 1" GRIND-ING STATIONS


(2) GARDNER VERTICAL ROTARY DISC GRINDER

New1994

1 of 2

THE LARGESTOFFERING OF

SIEPMANNAND BERGER

GRINDERSEVER OFFERED

AT PUBLICAUCTION

(3) BERGER – CNC SIDEBEVEL GRINDERS (NEW 1998-2000)

(2) INTERAMCO/HEINZ BERGER CNC SIDEBEVEL GRINDERS, MODEL BG-3,S/N’S 4706-71 (2000), 4706-70 (2000),4-AXIS GRINDING CARRIAGE,16.9",MAX SPINDLE SPEED 164 FT/S, 650MMGRINDING LENGTH, ROLLER BEARINGGUIDEWAYS W/LINEAR MEASURINGSYSTEM, DIGITAL SENSOR FOR WHEELWEAR, AUTO LUBRICATION SYSTEM,REMOTE CONTROL CAPABILITY VIAMODEM, INTERNAL CAD SYSTEM,WINDOWS CONTROL INTERFACE,INTEGRATED SERRATION STATION (SEE PHOTO)

INTERAMCO/HEINZ BERGER CNC SIDE BEVEL GRINDER, MODEL BG-1-CNC-DA-R, S/N 4758-110 (2000)4-AXIS GRINDING CARRIAGE, ROLLERBEARING GUIDEWAYS W/LINEAR MEASURING SYSTEM, DIGITAL SENSOR FOR WHEEL WEAR, AUTOLUBRICATION SYSTEM, REMOTE CONTROL CAPABILITY VIA MODEM,INTERNAL CAD SYSTEM, WINDOWSCONTROL INTERFACE, INTEGRATEDSERRATION STATION (SEE PHOTO)

BERGER AUTOMATIC ROTARY GRINDER,MODEL DRS1/RV2, TWIN 36" CHUCKS,S/N 4668/259 (1998) (SEE PHOTO)

(4) BERGER – CNC HOLLOW GRINDERS (NEW 1999-2003)

HEINZ BERGER CNC HOLLOW GRINDER,MODEL HG2-FPV, MAX GRINDINGLENGTH 17", MAX SPINDLE SPEED147.6 FT/S, GRINDING WHEEL DIA. 4.9"-7.9", S/N 4836/103 (2003) (SEE PHOTO)

BERGER CNC HOLLOW GRINDER,MODEL HG2, BERGER ANDRONICCNC CONTROL, ROBOTIC FEED ARM,S/N 4707/100 (1999)

(2) INTERAMCO/HEINZ BERGER CNC HOLLOW GRINDERS, MODEL HG2-CNC, S/N 4658-101, 4707-100(1999) (SEE PHOTO)

(4) BERGER – CNC ROTARY GRINDERS(NEW 1996-2000)

(2) INTERAMCO/HEINZ BERGER CNCDUAL CHUCK ROTARY GRINDINGMACHINES, MODEL DRG-1, 31.5"ELECTRO-MAGNETIC CHUCK,147 FT/S MAX SPINDLE SPEED,GRINDING WHEEL DIA. 17.7",S/N’S 4756/304 (2000), 4705-301(1999)

(2) BERGER ROTARY SURFACE GRINDERS,MODEL RTS-1, S/N’S 4639/75 (1997)(SEE PHOTO) 4601/71 (1996)

BERGER – CNC KNIFEGLAZING MACHINE

INTERAMCO/HEINZ BERGER DUAL KNIFEGLAZING MACHINE, MODEL PLM2-CNCR, MAX GLAZING LENGTH17", MAX SPINDLE SPEED 85 FT/S,GLAZING WHEEL DIA. 17.7",S/N 4724-100 4724-101 (1999) (SEE PHOTO)

BERGER – CNC CENTERLESS BLADE

GRINDERS(2) BERGER AUTOMATIC CENTERLESS

BLADE GRINDERS

BERGER – AUTOMATICSORTING SYSTEM

HEINZ BERGER AUTOMATIC SORTING SYSTEM, W/ FESTO UNIT, S/N TB5-TBB01V

INTERAMCO/HEINZ BERGER CNC HOLLOW GRINDER # HG-2-CNC

(14) HEINZ BERGER GRINDERSBEVEL-HOLLOW-ROTARY-GLAZING-CENTERLESS

BERGER “TWIN” ROTARY TABLE GRINDER # DRS-1-RV2

INTERAMCO/HEINZ BERGER DUAL KNIFE GLAZINGMACHINE # PLM-2-CNCR

BERGER ROTARY SURFACE GRINDER # RTS-1 BERGER DOUBLE ROTARY TABLE GRINDER # DRG-1-CNC 4


12

New1998

New2000

1 of 14

New1997

New1999

New1999


(24) FINISHING – BARRELS(10) BAIRD MOTORIZED TUMBLERS, VARIOUS

SIZES & HP(8) GLOBE "BARREL TYPE" TUMBLERS,

VARIOUS SIZES & HP (SEE PHOTO)(5) VIBRATORY HORIZONTAL FINISHING

BARRELS, 3 HPELLIOTT VIBRASLIDER FINISHING BARREL,

MODEL 52, S/N 6610191

FINISHING - BUFFINGMACHINES

G & P BUFFING MACHINE, MODEL VS-300,S/N C-4693

HISEY-WOLF BUFFING MACHINE,S/N 9030, W/ BUFFING JACKS AND DUST COLLECTOR

(8) CUSTOM MANUFACTURED 12" BUFFINGJACKS, CUTLER HAMMER CONTROL

ALSO OFFERING OVER (50) BUFFING JACKS,VARIOUS CONFIGURATIONS TO CHOOSE

FROM!!

(163) FINISHING - BELTSANDERS

TIMESAVER BELT SANDER, MODEL 113-1HPM75, S/N 28760 (NEW 2001) (SEE PHOTO)

(3) BURR KING CONTINUOUS BELT SANDERS,MODEL 760 W/ SPEED CONTROLS

(4) PORTER CABLE 4" CONTINUOUS BELTSANDERS, MODEL C4

(8) SUNDSTRAND CONTINUOUS BELTSANDERS, 1" TO 6"

OLYMPIC 2" CONTINUOUS BELT SANDER, 2 HP(2) KARRY 1" CONTINUOUS BELT SANDERS ENGELBERG 1" CONTINUOUS BELT SANDER,

S/N 112 WILTON 2" CONTINUOUS BELT SANDER,

3/4 HPBOLSTER GLAZING MACHINE, DUAL

SANDER, CUSTOM MFG, W/ FEED,PNEUMATIC FIXTURE

(20) CUSTOM MANUFACTURED 4" CONTINUOUS BELT SANDERS, W/ PNEU-MATIC ANGLE CONTROL, 5 TO 20 HP (SEE PHOTO)

(15) CUSTOM MANUFACTURED DUAL STA-TION 2" CONTINUOUS BELT SANDERS, W/PNEUMATIC ANGLE CONTROL 5 TO 20 HP

(8) DUAL POSITION 2 1/2" CONTINUOUS BELTSANDERS, PNEUMATIC ANGLE CONTROL

ALSO OFFERING OVER (100) BELT SANDERS,VARIOUS CONFIGURATIONS TO CHOOSE

FROM!!

(15) FINISHING -AUTO BUFFING

(15) CLAIR AUTOMATIC SURFACE FINISHINGMACHINES, MODEL 7302 (SEE PHOTO)

DUAL 40" WHEEL AUTOMATIC BUFFINGWHEEL, 10 HP, ALLEN BRADLEY CONTROL

FINISHING – CURING/DRYING OVENS

FOSTORIA EVEN-RAY INFRARED 12-SPINDLEDRYING OVEN, SLIDING ROTARY SYSTEM

FOSTORIA EVEN-RAY INFRARED 8-SPINDLEDRYING OVEN, MODEL BB421BB, 500WATT, SLIDING ROTARY SYSTEM,S/N C-216-37

KLEIBER & SCHULZ LIQUID ABRASIVE SYSTEM

( 2 ) ROSLER FULLY AUTOMATED FINISHING SYSTEMS 54" VIBRATORY BARRELS

CLAIR AUTOMATIC SURFACE FINISHING MACHINES

TIMESAVER BELT SANDER GUYSON AIRLESS FINISHING SYSTEM


13

New2001

New1996

New 1997

1 of 15

1 of 2

New1997


(2) FINISHING SYSTEMS –ROSLER (NEW 1997)

(2) ROSLER VIBRATORY FINISHING LINES:LINE 1 CONSISTS OF: (8) ROSLER 54"VIBRATORY FINISHING BARRELS, AND LINE 2 CONSISTS OF (4) ROSLER 54"VIBRATORY FINISHING BARRELS, BOTHLINES W/MEDIA STORAGE CONTAINERS,ROTARY DRYER, SOUNDPROOFING LIDS,MAGNETIC SEPARATOR, TRANSPORTCONVEYOR, CENTRAL CONTROL, AUTOVIBRATORY FLUID PROCESSING SYSTEMW/CONTROLS, ( 1997) (SEE PHOTO)

FINISHING SYSTEMS(2) KLEIBER & SCHULZ LIQUID ABRASIVE SYSTEMS, S.S. FEED CONVEYOR, S/N 159(1996), 164 (1997) (SEE PHOTO)

GUYSON AIRLESS FINISHING SYSTEM,MODEL L90, W/ GUYSON DIGITALCONTROLS, AUTO PALLET LOADER,DUST COLLECTOR, S/N CM20196 (1996)(SEE PHOTO)

(2) INTERAMCO/HEINZ BERGER CNC SIDE BEVEL GRINDERS, # BG-3 CNC

New2000

GLOBE "BARREL

TYPE" TUMBLERS

1 of 8

HERMES ENGRAVING MACHINE # F-3000

1 of 2


14

NEW HERMES ENGRAVER# IS-6000

EPILOG LASER MARKING MACHINE # LEGEND-32EX/6000

New2001

New2003


INDUCTION HEATERS (NEW 1999-2000)

AMERITHERM INDUCTION HEATER, MODELXP-7.5, W/ CHILLER, S/N 9907-0424-0220(1999)

AMERITHERM INDUCTION HEATER, MODELV1-05, S/N 2-0405-0009 (2000)

(3) AMERITHERM INDUCTION HEATERS,VARIOUS CAPACITIES (SEE PHOTO)

THERMOFORMINGMACHINES

JOHN BROWN THERMOFORMING MACHINE,MODEL C-3030,HEATING/FORMING/SEALING, ALLENBRADLEY CONTROL PANEL, TC-4 TEMPERATURE CONTROL UNIT, S/N 13358(1997) (SEE PHOTO)

TRI-MATIX THERMOFORMING MACHINE,SINGLE STATION, MODEL TSP-2.5X3, ALLENBRADLEY PANEL VIEW 550 CONTROL,S/N 2086A-96 (1996) (SEE PHOTO)

INJECTION MOLDINGMACHINES

SHINWA-SEIKI 150 TON INJECTION MOLD-ING MACHINE, MODEL DL-150-1Q, W/BUDZAR CHILLER UNIT, S/N150095008450743 (SEE PHOTO)

(2) NEWBURY 150 TON INJECTION MOLDINGMACHINES, MODEL H9-150MT, NEWBURYCONTROL, S/N 2-8718-150MS-93; 1-8876-150MS-94 (SEE PHOTO)

NEWBURY 75 TON INJECTION MOLDINGMACHINE, MODEL H4475BRS,S/N 4718275BS-85

NEWBURY 75 TON INJECTION MOLDINGMACHINE, MODEL H475RS,S/N 7178675S68

TOSHIBA 40 TON INJECTION MOLDINGMACHINE, MODEL ISP-40 S/N 712-t01-15

GRANULATORNELMOR GRANULATOR MODEL G810M1,

8" X 10" OPENING, W/ COLLECTION HOPPER AND BLOWER MOTOR,S/N 205176021(SEE PHOTO)

SHEARWYSONG & MILES 6' x 12 GA SHEAR, MODEL

1272 (SEE PHOTO)

MARKING/ENGRAVING(NEW 2001-2003)

EPILOG LASER MARKING MACHINE,MODEL LEGEND-32EX/6000, DUAL HEAD,120 WATT, S/N 6120-02148632EX (2003) (SEE PHOTO)

NEW HERMES ENGRAVER, MODEL IS-6000,INTELLIGENT SYSTEM, BENCH TYPE,S/N 170410 (2001) (SEE PHOTO)

(2) HERMES ENGRAVING MACHINE,MODEL F3000 (SEE PHOTO)

HERMES ENGRAVING MACHINE,S/N MSP69237

ACROMARK MARKING MACHINE, MODEL550-50, S/N 93968

HOWMET MARKING MACHINE, MODEL D,S/N 17

(3) OSILING ETCHING MACHINES,MODEL 500

NELMOR GRANULATOR

NEWBURY 150 TON INJECTION MOLDING MACHINES

SHINWA-SEIKI 150 TON INJECTION MOLDING MACHINE # DL-150-1Q

TRI-MATIX THERMOFORMING MACHINE, SINGLE STATION # TSP-2.5X3

JOHN BROWN THERMOFORMING MACHINE # C-3030

New1997

New1996

1 of 2

AMERITHERMINDUCTION HEATERS

1 of 5

New1995

New1994

DAY 2SIEPMANN CNC GRINDERS

BERGER CNC GRINDERSBLADE GRINDERS MISC

ROSLER FINISHING SYSTEMSPOLISHING

BELT SANDERSBUFFING/POLISHING

HEAT TREATINGMARKING/ENGRAVING

PLANT SUPPORTOFFICE-EQUIPMENT/FURNITURETRUCKS/VEHICLES/TRACTORS

BLISTER PACKAGING(2) KABAR ROTARY BLISTER PACK

MACHINES, MODEL 10000-FS, 4 POSITIONROTARY TABLE, S/N’S 10K/71 & 10-538-65(SEE PHOTO)

KABAR BLISTER PACKAGING MACHINES,W/ HIGH FREQUENCY GENERATOR,SLIDING SHUTTLE TABLE (SEE PHOTO)

SHRINK WRAPPINGMACHINES

AMERIPAK SHRINK WRAP PACKAGINGMACHINE, MODEL 60,

WELDOTRON SHRINK WRAP TUNNEL,W/ WELDOTRON L-SEALER

WELDOTRON HEAT SHRINK TUNNEL

PACKAGING MACHINECOSMOS SEAL PACK MACHINE, MODEL

ARTIO-15000, S/N 1018 (SEE PHOTO)

CENTRIFUGAL DRYER(3) NEW HOLLAND 16" CENTRIFUGAL

DRYERS, S/N’S 898362, 886535, 944291(SEE PHOTO)

AUTOMATIC CUTTING &SPLICING MACHING

AUTOMATIC CUTTING & SPLICINGMACHINE, MODEL USP911, DIGITAL CONTROL

STEP FEEDER SYSTEMKOBERLEIN STEP FEEDER SYSTEM,

W/ FESTO UNIT, S/N 98-1496 (NEW 1998)(SEE PHOTO)

CUTTING & SPLICINGMACHINES

(2) EAGLE STRIP CUTTERS, MICRO CONTROLLED REEL FEED

DIE CUTTERAMPAK ROTOMATIC ACCU-ROLL

DIE CUTTER

HOT STAMPING PRESSESACROMARK HOT STAMPING MACHINE,

MODEL 520-20, S/N 106583 PEERLESS HOT STAMP PRESS, S/N P-459

ULTRASONIC WELDERS(2) BRANSON ULTRASONIC WELDERS,

MODEL 910IW, S/N’S YE30239E,YE403768(SEE PHOTO)

TRUCKS & VEHICLES2001 CHEVROLET IMPALA VIN#

2G1WF52EX19363906, 4-DOOR 1996 FORD WINDSTAR VIN

#2FMDA5146TBB955791993 CHEVROLET VAN-30, WHITE HI-CUBE

VIN #2GCHG31K6P4104800 (SEE PHOTO)1993 CHEVROLET ASTRO VAN,

VIN #1GNEL19W6PB1489931991 PONTIAC SUBURBAN MINI VAN,

VIN #1GMCU06DOMT2239091989 CHEVROLET 3500 DUMP TRUCK

VIN #1GBHV34K2KJ120241 (SEE PHOTO)1981 CHEVROLET SCOTTSDALE 30 STAKE

TRUCK, VIN #1GBGC34T9BV143616GMC 7000 DUMP TRUCK W/ SNOW

PLOW AND SANDER UNIT,VIN #1GDG7D1B5EV548849

1978 GMC 6500 DUMP TRUCK W/PLOWAND SANDER, VIN #TCE678V612797 (SEE PHOTO)

1968 INTERNATIONAL SNOWPLOW TRUCK,VIN #809612G324412G

JEEP GRAND CHEROKEE LIMITED PW, PL, AT,AC, LEATHER, VIN # 1J4GW5BN41C551987(SEE PHOTO)


15

BRANSON ULTRASONICWELDERS # 910IW

COSMOS SEAL PACK MACHINE # ARTIO-15000

KOBERLEIN STEP FEEDER SYSTEM

KABAR BLISTER PACKAGING MACHINEW/ HIGH FREQUENCY GENERATOR,

SLIDING SHUTTLE TABLE

KABAR ROTARY BLISTER PACKMACHINE, # 10000-FS

New1996

1 of 2

1 of 2


NEW HOLLAND 16" CENTRIFUGAL DRYER

1 of 3

VIEW OF VEHICLES

1978 GMC 6500 DUMP TRUCK W/PLOW AND SANDER 1989 CHEVROLET 3500 DUMP TRUCK 1993 CHEVROLET CUBE VAN

INTERNATIONAL BACK HOE FORD #1210 TRACTOR

(12) FORKLIFTSTCM 4300 LB LPG FORKLIFT, MODEL

FCG25T7T, SOLID TIRES, S/N A15603946 TCM 4100 LB LPG FORKLIFT, MODEL

FCG25N6, SOLID TIRES, S/N A48805164 TCM 2350 LB LPG FORKLIFT, MODEL

FCG15T8T, SOLID TIRES, S/N A15W01580 (3) TCM 2300 LB LPG FORKLIFTS,

MODEL FCG15N7, SOLID TIRES,S/N’S 36000125, 36000120, 36000124

TCM 2300 LB LPG FORKLIFT MODELFCG15N77, SOLID TIRES, S/N A44701168

TCM 2000 LB LPG FORKLIFT, MODELFCG10N6, S/N 36000112 (SEE PHOTO)

ALLIS CHALMERS 3000 LB LPG FORKLIFT,MODEL E1B3024PS, SOLID TIRES,S/N 32505000

TOYOTA 2550 LB LPG FORKLIFT,MODEL 423FGCC15, SOLID TIRES,S/N 423FGCC15-12577

CLARK 2500 LB ELECTRIC FORKLIFT,MODEL TW-25, S/N TW-125-348-2200

CLARK 2500 LB LPG FORKLIFT, MODEL TW25,SOLID TIRES, S/N TW1253482200172

BALERSECONOMY BALER, MODEL 6031, S/N 58890 CONSOLIDATED BALING MACHINE, MODEL

STDS-3, S/N 794922

BACKHOEBACK HOE, MODEL 250PH, SERIES A,

S/N 2341278100363-X (1993) (SEE PHOTO)

STRETCH WRAPPERIPM STRETCH WRAP MACHINE

FLOOR SWEEPERSTENNANT ELECTRIC FLOOR SWEEPER,

MODEL 3640-E S/N 80452 (2001) (SEE PHOTO)

TENNANT LPG FLOOR SWEEPER, MODEL 355,S/N 2222

ELGEE BATTERY POWERED SWEEPER W/ CHARGER

SCISSOR LIFTJLG ELECTRIC SCISSOR LIFT, MODEL 2033E,

750 LB CAP., REMOTE (SEE PHOTO)

LAWN TRACTORSFORD 1210 TRACTOR (SEE PHOTO)ACE 46" LAWN TRACTOR, MODEL 16H,

46" CUTMURRAY LAWN TRACTOR, 12.5 HP

AIR COMPRESSORSINGERSOLL RAND 150 HP ROTARY SCREW

AIR COMPRESSOR, MODEL SSR-XFE150-2S, S/N FF1279U97181 (1997) (SEE PHOTO)

(2) GARDNER DENVER ROTARY SCREW AIRCOMPRESSORS, MODEL HAE1053,S/N’S 93308 & 93307

INGERSOLL RAND 20 HP ROTARY SCREW AIRCOMPRESSOR, MODEL SSR-XF20, 20 HPW/ INGERSOLL RAND THERMOMETERDRYER, S/N JX4263401299 (2001) (SEE PHOTO)

DRESSER AIR MAX 5 HP VERTICAL TANK AIRCOMPRESSOR, MODEL 5000CHAMPION 5HP VERTICAL TANK AIR COMPRESSOR

COMPRESSED AIR DRYERINGERSOLL RAND COMPRESSED AIR DRYER,

MODEL TM1900, S/N 97FTM283 (1997)(SEE PHOTO)

BAR CODING EQUIPMENTDATA COLLECTION BARCODE EQUIPMENT

CONSISTING OF: (49) INTERMEC 9560 DATACOLLECTION CLOCKS, (2) INTERMEC 9445TRAKKERS, DOCKING STATIONS ANDCHARGERS, (6) INTERMEC 9154 CONTROLLERS, (5) INTERMEC 9710

BAR CODE WEDGE READER, (7) ADVANCEDBARCODE TECHNOLOGY


16

New1993


INGERSOLL RAND 150 HP ROTARY SCREW AIR COMPRESSOR # SSR-XFE150-2S

New1997

TCM FORKLIFTS

1 of 12

(14) DUST COLLECTORSDUST HOG NATIONAL AIR FILTER DUST COLLECTOR, MODEL

SBD12-3, 6-CARTRIDGE, S/N 60050228 (NEW 2001) (SEE PHOTO)DUST HOG NATIONAL AIR FILTER DUST COLLECTOR, MODEL

SBD8-2, 4-CARTRIDGE, S/N 60050229 (NEW 2001)

(2) TORIT DUST COLLECTORS, MODEL VS-3000, 7.5 HP(2) TORIT DUST COLLECTORS, MODEL MC-1200(2) TORIT DUST COLLECTORS MODEL MC-1000, S/N’S C-5293,

C-5291, B-7581 (2) TORIT DUST COLLECTORS, MODEL 90-219-5 TORIT DUST COLLECTOR, MODEL 84, S/N G6618 TORIT DUST COLLECTOR, MODEL 95-5-CAB, 5 HP, S/N 1G373377 PLYMOVERT DUST COLLECTOR, MODEL MC-800 WOLVERINE DUST COLLECTOR, MODEL 730CC, S/N WD-6507 ALSO AVAILABLE: LARGE SELECTION OF HEAVY DUTY INDUSTRIAL DUST

COLLECTORS INCLUDING: BAG HOUSES, HOPPERS, BLOWERS, ETC.(SEE PHOTO)

COMPUTER EQUIPMENT (MANY NEW 2002-2003)

APPROXIMATELY (100) DESKTOP PCS,AND (25) LAPTOP COMPUTERSCOMPUTER SERVERS INCLUDING: (2) DELL 2400 POWER EDGE

SERVERS, (1) DELL 6400, (15) COMPAC EVO PENTIUM 4 W/ 17"MONITORS, (5) COMPAC DESK PRO PENTIUM III, W/ KDS 17"MONITORS, HP SERVER TC 2120 PENTIUM 4

POWER EDGE SERVER, (1) DIGITAL ALPHA 2100 SERVER, DELL POWEREDGE 300

DESKTOP PUBLISHING SYSTEMS CONSISTING OF: (3) POWER MAC 8100,(1) POWER MAC 4400, (1) COMTADE PENTIUM 90 MHZ, SYSTEMS (3)POWER MAC G4,W/ APPLE STUDIO DISPLAY, 21" MONITORS

LARGE ASSORTMENT OF PRINTERS AND COMPUTER/NETWORK SUPPORTEQUIPMENT

OFFICE EQUIPMENTAT&T MERLIN PHONE SYSTEM, APPROX. (100) PHONE SETS, VOICE

MAIL MODULE, RECENT UPGRADESOFFICE FURNITURE INCLUDING: EXECUTIVE OFFICE SUITES, EXECUTIVE

CONFERNECE ROOMS, PARTITIONED OFFICE CUBICLES, DESKS,CREDENZAS, TABLES, SOFAS, FRAMED PRINTS, COPIERS, FAXS, ETC.(SEE PHOTO)

PLANT SUPPORTARBOR PRESSES - (12) GREENERD BOX STITCHER - (3) INTERLAKE ACME BRIDGE CRANE -CONCO CRANE

APPROX. 50 FT SPAN, W/ ELEC-TRIC CHAIN HOIST

CONVEYORS - (4) DORNER BELTS W/VISUAL POSITIONING CONTROLS

DEGREASING TANKS- (3) GROEN S.S.FANSFILTER - (2) BARNES MAGNETIC SEP-

ARATORS, MODEL 815-50FILTER SYSTEM – FILTRINE, MODEL

PCP750AHFILTRATION SYSTEM - WASTE WIZARD,

MODEL WW-440,S/N 00-1220083-01

GONIOMETER -CATRA LASER, S/N L-3-016

HAND TOOLSHAND TRUCKSLADDERSMELTING POTS - (2) OHM TEMP,

MODEL RH5, S/N 85-733, 84-586 PALLET JACKSPALLET RACKING – APPROX. (195) SECTIONS POWER TOOLSPOWER WASHING MACHINE- PROECO, MODEL PC, S/N 93-127 SCALES- (12) TOLEDO/FAIRBANKS/HOWE PLATFORM: IN-GROUND

& PORTABLE,SLUDGE REMOVAL SYSTEM- FILTERTECH, W/ STEEL TANKS, FILTERS,

PUMPS, ETC.SNOW BLOWER- ARIENS, MODEL ST36, 12 HP (SEE PHOTO)SHOP CART- KARRY-ALL CLUB CAR ELECTRIC, GOLF CART TYPE

(SEE PHOTO)TABLESTAPPING - LASSEY MACHINE, MODEL 1198 TESTING MACHINE - CATRA EDGE SHARPNESS, S/N AET018 TORCH SETS - (2) ACETYLENE W/ CARTS AND GAGES VISESWORK BENCHES

TENNANT ELECTRIC FLOOR SWEEPER # 3640-E

JLG ELECTRICSCISSOR

LIFT

VIEW OF DUST COLLECTORS

INGERSOLLRAND COMPRESSED AIR DRYER # TM1900

INGERSOLL RAND 20 HP ROTARY SCREW AIR COMPRESSOR

# SSR-XF20

(2) DUST HOG DUST COLLECTORS # SBD12-3

VIEW OF OFFICE

VIEW OF CONFERENCE ROOM

KARRY-ALL CLUB CAR ELECTRIC SHOP CART


17

New2001

New1997

New2001

New2001


ARIENS SNOW BLOWER # ST36, 12 HP

®

IMPERIAL SCHRADE KNIFE COLLECTION

OVER 2000 KNIVES ANTIQUES-COLLECTIBLES MAKE

UP THE IMPERIAL SCHRADE KNIFE COLLECTION.

THE COLLECTION COVERS THE 100 YEAR HISTORY OF

THE IMPERIAL SCHRADE KNIVES ALONG WITH

COLLECTIBLES AND ANTIQUES COVERING HUNTING,

FISHING, CUTLERY AND WAR MEMORABLILIA.

THE KNIFE COLLECTION WILL BE OFFERED ON

DAY THREE, OCT. 28TH STARTING AT 10:00 AM (EST).

CONTACT AUCTIONEER’S OFFICE FOR COMPLETE

LISTING, TERMS AND CONDITIONS.

ANTIQUE KNIFE COLLECTION (PARTIAL VIEW)



D AY T H R E E - O c t o b e r 2 8 , 2 0 0 4 • S t a r t s a t 1 0 a m ( E S T )


T H O M A S I N D U S T R I E S S I N C E 1 9 4 7 - N AT I O N W I D E A U C T I O N S

A U C T I O N I N F O R M AT I O N

19

DISCLAIMER

All items offered at this auction will besold "as is, where is" and with all faults.Auctioneer is not responsible for errors,omissions, additions, or deletions. Pleasecheck with the auctioneer's office forthe final listing. Items offered may ormay not necessarily be sold asdescribed and/or photographed.Buyers should verify all aspects of theirpotential purchases during inspection.

ONSITE BIDDER TERMS OF SALE/DEPOSIT/PAYMENT

At time of registration a mandatoryrefundable deposit of $100.00 in theform of cash or check will be requiredin order to receive a bidder’s paddle.A 25% deposit must be maintainedthroughout the day of the auction. If asigned blank check is given as adeposit it will be treated as a runningdeposit. Payment is to be made in fullwithin 24 hours of the auction or priorto the removal of any equipment.Deposit and payment are to be madeby cash, certified check, or cashier’scheck. Company checks will beaccepted only if accompanied by abank letter guaranteeing unqualifiedpayment to Thomas Industries, Inc. Allpurchases are subject to applicablefederal, state and local taxes unlessauctioneer is provided with a validsales tax exemption certificate.Auctioneers’ announcements on theday of sale supersede published infor-mation. Participation in the auctionwill acknowledge that you have readand consented to all of the terms andconditions. We do not accept creditcards from onsite auction buyers. A10% buyer’s premium will apply to allon-site purchases at this sale.

REMOVAL

Buyers are responsible for all shippingand rigging charges. Final removal forall items November 23, 2004

CAN’T ATTEND? – LIVE INTERNET BIDDING AVAILABLE

Internet bidding is in real time. Bid livethrough the Internet from anywhere inthe world. Additional Terms &Conditions apply for Internet bidders,visit www.thomasauction.com fordetails and registration.

PROXY BIDSIf you are unable to physically attendthis auction sale or do not wish to bidover the Internet. Please call (203) 458-0709 for information and a proxy bidform.

AIRPORTSAlbany International (ALB) - 90 Milesfrom Imperial Schrade.Stewart International (SWF) - 44 Milesfrom Imperial Schrade.JFK International (JFK) -110 MilesFrom Imperial SchradeLa Guardia (LGA) – 100 MilesFrom Imperial Schrade

HOTELSNevele Grande Resort1 Nevele RdEllenville, NY 12428Phone: 1-800-647-6000(1.5 miles from the plant)Holiday Inn Middletown68 Crystal Run RoadMiddletown, NY 10941Phone: (845) 343-1474(28 miles from the plant)Hampton Inn201 Crystal Run RoadMiddletown, NY 10941Phone: (845) 692-7600(28 miles from the plant)

AUCTION FINANCING AVAILABLE100% FINANCING AVAILABLE:

INCLUDING BUYER’S PREMIUM,SALES TAX,AND SHIPPING 48-HOUR

APPROVAL WITHOUT FINANCIAL STATEMENTS ON AMOUNTS UP TO$75,000. CONTACT 1-800-438-1470

OR APPLY ON LINE AT www.auctionlease.com

DIRECTIONS

From Boston, MA/ Springfield, MA - TakeI-90 West. Merge onto New York StateThruway West (6.6 miles). Merge ontoNew York State Trwy South/I-87 Southusing the exit- on the left- toward NewYork (43.0 miles). Merge onto NY-28West/Onteora Trl using exit number 19toward RT-28/Kingston/Rhinecliff Bridge(1.3 miles). Merge onto US-209 Southtoward Ellenville (26.3 miles). Plant willbe on your Left.

From New York City, NY - Take I-95South. Take the Palisades Parkway exit-exit number 74 (0.6 miles). Merge ontoPalisades Interstate Parkway North (18.6miles). Merge onto New York StateThruway North/I-87 North using exitnumber 9W toward Albany (24.1 miles).Merge onto NY-17 West using exit num-ber 16 toward Harriman/RT-17 (31.4miles). Merge onto US-209 using exitnumber 113 toward Wurtsboro/Ellenville(13.9 miles). Plant will be on your Right.

From Buffalo/Syracuse, NY - Take I-90East. Merge onto I-690 East using exitnumber 39 toward Syracuse (9.5 miles).Merge onto I-81 S toward Binghamton(76.4 miles). Merge onto NY-17 Eastusing the exit- on the left- toward NewYork (76.6 miles). Take the RT-52 exit- exitnumber 100- toward Liberty (0.2 miles).Turn Left onto NY-52 East (19.8 miles).Turn Left onto US-209/South Main Street(0.5 miles). Plant will be on your Right.

THOMAS INDUSTRIESAPPRAISAL CORPORATION

Accurate appraisals supported by over 56 years of conducting

worldwide auctions and liquidations.

Call (203)458-0709 for a confidential appraisal of

your assets. One piece of equipment or an entire plant.

SALE SITE:

7 SCHRADE COURTELLENVILLE, NEW YORK

SALE DATES:Tues., Wed. & Thurs.OCTOBER 26th, 27th, 28th

@10:00 AM (EST)

INSPECTION DATES: Tues., Wed. & Thurs.October 19th, 20th, 21st, 2004 and Monday, October 25th, 2004, from 8:30 AM - 4:30 PM and Morning of Sale Dates

®

FIRST CLASS MAILFORWARDING SERVICE REQUESTED

PRESORTED FIRSTCLASS MAIL

U.S. POSTAGE

PAIDPermit No. 260Bridgeport, CT

THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310

(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com

Under Management of:

SALE SITE:

7 SCHRADE COURTELLENVILLE, NEW YORK

SALE DATES:TUESDAY, WEDNESDAY, THURSDAYOCTOBER 26th, 27th, 28th, 2004@10:00 AM (EST)

INSPECTION DATES: Tuesday - Thursday, October 19th, 20th, 21st, 2004and Monday, October 25th, 2004,from 8:30 AM - 4:30 PM and morning of sale dates

ABB ROBOT INGERSOLL RAND 150 HP ROTARY

SCREW AIR COMPRESSOR ROUSELLE 15 TON OBIPUNCH PRESS

BRANSON ULTRASONIC

WELDERS

NEW HERMES ENGRAVER

VIEW OF CONFERENCE ROOM

VIEW OF VEHICLESTCM FORKLIFTS

1 of 2

1 of 12

New1997New

2002

New2001

LIVE ON-SITE AND WEBCAST AUCTION

SELLING SEQUENCE:OCTOBER 26-27TH • PRODUCT LINES AND ALL MACHINERY AND EQUIPMENT

OCTOBER 28TH • ANTIQUE KNIFE COLLECTION ONLY

Also Featuring:

InjectionMolding

Department

Thermoforming

Packaging

Heat Treating

(64) Presses -OBI - S.S.S.C. -

Hyd.

Also Featuring:

Toolroom

(70+) RivetingMachines

SewingMachines

Plant Support

(28) SurfaceGrinders

®

MULTI-MILLION DOLLAR 3-DAY AUCTION Schrade...DENISON 1-TON MULTI PRESSES DAY ONE - October 26, 2004...

Documents

Transcript of MULTI-MILLION DOLLAR 3-DAY AUCTION Schrade...DENISON 1-TON MULTI PRESSES DAY ONE - October 26, 2004...