Multi DomiLED - Dominant Opto Technologies Sdn Bhd · Synonymous with function and performance, the...

1

Features:> High brightness tri-color surface mount LED.> Each color can be individually controlled> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 3.0 x 1.7mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.> Superior Corrosion Resistant.> Compliance to automotive standard; AEC-Q101.

Multi DomiLEDSynonymous with function and performance, the Multi DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness.

DATA SHEET

Multi DomiLEDD6RTB-SKG

© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.All rights reserved. Product specifications are subject to change without notice.

DOMINANTOpto TechnologiesInnovating Illumination

TM

29/09/2017 V2.0

Applications:> Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc.> Signs: full color video> Consumer & Communication: backlighting of LCDs> General Lighting: architectural lighting, decorative lighting

True Green 528nm

D6RTB-SKG-U3V3+W2X+S2T-1

2

Red 625nm

Part OrderingNumber

Color, λdom (nm)

Chip #1 Chip #2 Chip #3

Blue 465nm

Max. (V)Typ. (V)Vf @ If = 20mA Appx. 3.1

Electrical Characteristics at Tj=25˚C

Red

True Green

Blue

2.20

3.00

3.00

2.50

3.30

3.30

Min. (V)

1.90

2.65

2.65

Optical Characteristics at Tj=25˚CLuminous Intensity @ If = 20mA IV (mcd) Appx. 1.1

Chip #1 Chip #2 Chip #3

650.0-1280.0 1400.0-2850.0 224.0-450.0

29/09/2017 V2.0

Unit

Absolute Maximum RatingsMaximum Value

DC forward current

Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)

Reverse voltage

ESD threshold (HBM)

LED junction temperature

Operating temperature

Storage temperature

Thermal resistance (1 chips on)- Real Thermal Resistance Junction / ambient, Rth JA real Red Blue & True Green Junction / solder point, Rth JS real Red Blue & True Green(Mounting on DOMINANT standard PCB)

Red; AlInGaP=50; True Green, Blue; InGaN=50

Red ; AlInGaP=200True Green, Blue; InGaN=200

Red; AlInGaP=12; True Green, Blue; InGaN= 5

2000

125

-40 … +115

-40 … +125

360390

160170

mA

mA

V

V

˚C

˚C

˚C

K/WK/W

K/WK/W

Vr @ Ir = 10uAMin. (V)

12

5

5

D6RTB-SKGDOMINANTOpto TechnologiesInnovating Illumination

TM

3 29/09/2017 V2.0

Group

Wavelength Grouping

Wavelength distribution (nm) Appx. 2.2Color

Red

True Green

Blue

Full

FullABC

FullABC

619 - 629

520 - 535520 - 525525 - 530530 - 535

459 - 471459 - 463463 - 467467 - 471


TM

4

Color

Red

True Green

Blue

Luminous Intensity Appx. 1.1

IV (mcd)

Luminous Intensity Group at Tj=25˚CBrightness Group

U3V3

W2X1X2

S2T1T2

650.0 ... 900.0900.0 ... 1280.0

1400.0 ... 1800.01800.0 ... 2240.02240.0 ... 2850.0

224.0 ... 285.0285.0 ... 355.0355.0 ... 450.0

29/09/2017 V2.0


TM

5 29/09/2017 V2.0

Forward Voltage VF (V)

Forward Current IF (mA)

Forw

ard

Cur

rent

I F (m

A)

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Relative Luminous Intensity Vs Forward Current(Red)

IV/IV(20mA) = f(IF); Tj = 25°C

Forw

ard

Cur

rent

I F (m

A)

Temperature T(°C)

Maximum Current Vs Temperature(Red) IF=f(T)


Forw

ard

Cur

rent

I F (m

A)

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Relative Luminous Intensity Vs Forward Current(Blue & True Green)

IV/IV(20mA) = f(IF); Tj = 25°C


TM


Forw

ard

Cur

rent

I F (m

A)

Temperature T(°C)

Maximum Current Vs Temperature(Blue & True Green) IF=f(T)

Forward Current Vs Forward Voltage(Blue & True Green)IF = f(VF); Tj = 25°C

Forward Current Vs Forward Voltage(Red)

IF = f(VF); Tj = 25°C

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F


Forward Current Vs Forward VoltageIF = f(VF); Tj = 25°C (Red)


0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)

Maximum Current Vs TemperatureIF = f (T) (Red) (1 chip on)

Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts

Ta = Ambient TemperatureTs = Solder Point Temperature

Relative Luminous Intensity Vs Forward CurrentIV/IV(20mA) = f(IF); Tj = 25°C (Red)

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Relative Spectral EmissionIrel = f(λ); Tj = 25°C; IF = 20mA

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50


Relative Luminous Intensity Vs Forward CurrentIV/IV(20mA) = f(IF); Tj = 25°C (Blue & True Green)

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forw

ard

Cur

rent

I F

Forward Current Vs Forward VoltageIF = f(VF); Tj = 25°C (Blue & True Green)


Blue True Green Red

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forw

ard

Cur

rent

I F



Blue True Green Red

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forw

ard

Cur

rent

I FForward Current Vs Forward Voltage

IF = f(VF); Tj = 25°C (Blue & True Green)


Blue True Green Red

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forw

ard

Cur

rent

I FForward Current Vs Forward Voltage

IF = f(VF); Tj = 25°C (Blue & True Green)


Blue True Green Red

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6

Forw

ard

Cur

rent

I F



Blue True Green Red

Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )

Allowable Forward Current Vs Duty Ratio ( Tj = 25°C; tp ≤ 10μs )

Duty Ratio, %

10

100

1000

0.1 1 10 100

Red, True Green & Blue

∆Cx

∆Cy

Forw

ard

Cur

rent

I F(m

A)

Maximum Current Vs TemperatureIF = f (T) (True Green & Blue) (1 chip on)

Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta

True Green & Blue

Ts


6 29/09/2017 V2.0

Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )

Radiation Pattern


Rel

ativ

e W

avel

engt

h λr

el (n

m)

Junction Temperature Tj(°C)

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F (

V)


Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


TM

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Wavelength λ (nm)

0.270°

90°

80°

0

60°

50°

40°

30° 20°

0.6

0.4

1.0

0.8

10° 0°

Duty Ratio, %


Allowable Forward Current Vs Duty Ratio ( Tj = 25°C; tp ≤ 10μs)

Relative Luminous Intensity Vs Junction TemperatureIV/IV(25°C) = f(Tj); IF = 20mA

Relative Forward Voltage Vs Junction Temperature∆VF = VF - VF(25°C) = f(Tj); IF =20mA

0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50

0

10

20

30

40

50

1.8 2.0 2.2 2.4 2.6 2.8

Forw

ard

Cur

rent

I F




0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

350 400 450 500 550 600 650 700 750

Wavelength λ (nm)

Forw

ard

Cur

rent

I F(m

A)


Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta Ts



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel


0.0

0.5

1.0

1.5

2.0

2.5

0 10 20 30 40 50



Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

0

10

20

30

40

50

2.4 2.6 2.8 3.0 3.2 3.4 3.6Fo

rwar

d C

urre

nt I F



Blue True Green Red

Allo

wab

le F

orw

ard

Cur

rent

I F( m

A )

Allowable Forward Current Vs Duty Ratio ( Tj = 25°C; tp ≤ 10μs )

Duty Ratio, %

10

100

1000

0.1 1 10 100

Red, True Green & Blue

∆Cx

∆Cy

Forw

ard

Cur

rent

I F(m

A)

Maximum Current Vs TemperatureIF = f (T) (True Green & Blue) (1 chip on)

Temperature T(°C)

0

10

20

30

40

50

60

0 20 40 60 80 100 120

Ta

True Green & Blue

Ts


-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

-50 -25 0 25 50 75 100 125

True Green

Blue Red

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

-50 -25 0 25 50 75 100 125

Red

True Green

Blue

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)

Relative Forward Voltage Vs Junction Temperature∆VF = VF - VF(25°C) = f(Tj); IF = 20mA

Junction Temperature Tj(°C) Junction Temperature Tj(°C)

-

-

-

-

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

Relative Luminous Intensity Vs Junction TemperatureIV /IV (25°C) = f(Tj); IV = 20mA

Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

-50 -25 0 25 50 75 100 125

Blue20

Red

True Green

Blue 5

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

-50 -25 0 25 50 75 100 125

True GreenBlue 20

Red

Blue 5

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)



-

-

-4

-2

2

4

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)


Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

-0.5

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

0.5

-50 -25 0 25 50 75 100 125

True Green

Blue Red

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

-50 -25 0 25 50 75 100 125

Red

True Green

Blue

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)



-

-

-

-

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)


Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

-0.4

-0.3

-0.2

-0.1

0.0

0.1

0.2

0.3

0.4

-50 -25 0 25 50 75 100 125

Blue20

Red

True Green

Blue 5

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

-50 -25 0 25 50 75 100 125

True GreenBlue 20

Red

Blue 5

Rel

ativ

e Fo

rwar

d Vo

ltage

∆V F

(V)



-

-

-4

-2

2

4

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)


Rel

ativ

e Lu

min

ous

Inte

nsity

I rel

-10.00

-8.00

-6.00

-4.00

-2.00

0.00

2.00

4.00

6.00

8.00

10.00

0 10 20 30 40 50

True Green

Blue

Rel

ativ

e W

avel

engt

h λ r

el(n

m)

Relative Wavelength Shift Vs Forward Currentλdom = f(IF); Tj = 25°C


Relative Wavelength Shift Vs Forward Currentλdom = f(IF); Tj = 25°C


Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

7 29/09/2017 V2.0


TM

Relative Wavelength Vs Junction Temperature∆λdom = λdom - λdom (25°C) = f(Tj); IF =20mA

-8.0

-6.0

-4.0

-2.0

0.0

2.0

4.0

6.0

8.0

-50 -25 0 25 50 75 100 125

Blue

RedTrue Green

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

Relative Wavelength Vs Junction Temperature∆λdom = λdom - λdom (25°C) = f(Tj); IF = 20mA


-8.0

-6.0

-4.0

-2.0

0.0

2.0

4.0

6.0

8.0

-50 -25 0 25 50 75 100 125

Blue 5

True Green

Red

Blue 20

Rel

ativ

e W

avel

engt

h ∆λ

dom

(nm

)

Relative Wavelength Vs Junction Temperature∆λdom = λdom - λdom (25°C) = f(Tj); IF = 20mA


8

Multi DomiLED : D6RTB-SKG Package Outlines

Note: Package is Pb-free.

Materials

Lead Frame

Housing

Encapsulant

Lead-finishing

Materials

Cu Alloy with NipdAu Plating

High temperature resistant plastic, PPA

SIlicone

NipdAu Plating

29/09/2017 V2.0

Note : Primary thermal path is through Cathode lead of LED package for Red, Anode lead for Blue and True Green.


TM

9

Recommended Solder Pad

29/09/2017 V2.0


TM

10

Taping and orientation

• Reels come in quantity of 1000 units.• Reel diameter is 180 mm.

29/09/2017 V2.0


TM

10

Taping and orientation

• Reels come in quantity of 1000 units.• Reel diameter is 180 mm.

22/05/2017 V1.0


TM

11

Packaging Specification

29/09/2017 V2.0


TM

28/10/2010 V8.010


AllnGaP : DDx-xRSDOMINANTOpto TechnologiesInnovating Illumination

TM

12 29/09/2017 V2.0


Average 1pc Multi DomiLED 1 completed bag (1000pcs)

0.034 190 ± 10Weight (gram)

CardboardBox

Dimensions (mm) Empty BoxWeight (kg)

Super Small

Small

Medium

Large

For Multi DomiLED

Reel / BoxCardboard BoxSize

Weight (gram) 0.034 240 ± 10

DOMINANT TM

Moisture sensitivity level

Moisture absorbent material +Moisture indicator

The reel, moisture absorbent material and moisture indicator aresealed inside the moisture proof foil bag

Reel

Barcode label

Label

(L) Lot No : lotno

(P) Part No : partno

(C) Cust No : partno

(G) Grouping : group

(Q) Quantity : quantity

(D) D/C : date code

(S) S/N : serial no

DOMINANT Opto TechnologiesML TEMP2 260˚CRoHS Compliant

Made in Malaysia

325 x 225 x 190

325 x 225 x 280

570 x 440 x 230

570 x 440 x 460

0.38

0.54

1.46

1.92

7 reels MAX

11 reels MAX

48 reels MAX

96 reels MAX


TM

13

Time (sec)0 50 100 150 200

300

250

225

200

175

150

125

100

75

50

25

275

Tem

pera

ture

(˚C

)Classification Reflow Profile (JEDEC J-STD-020C)

Ramp-up3˚C/sec max.

255-260˚C10-30s

60-150s

Ramp-down

6˚C/secmax.

Preheat 60-180s

480s max

217˚C

Recommended Pb-free Soldering Profile

29/09/2017 V2.0


TM

14 29/09/2017 V2.0

Appendix

1) Brightness:1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).

2) Color:2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3).2.2 DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3).

3) Voltage:3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3).


TM

Revision History

NOTE

All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT

Opto Technologies does not assume any liability arising out of the application or use of any product described herein.

DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function

or design.

DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems

without the express written approval from the Managing Director of DOMINANT Opto Technologies.

Page

-

5, 6, 7

Subjects

Initial Release

Update Graph

Date of Modification

22 May 2017

29 Sep 2017

15 29/09/2017 V2.0


TM

About Us

DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manu-facturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More in-formation about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com.

Please contact us for more information:

DOMINANT Opto Technologies Sdn. Bhd.Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, MalaysiaTel: (606) 283 3566 Fax: (606) 283 0566E-mail: [email protected]


TM

Multi DomiLED - Dominant Opto Technologies Sdn Bhd · Synonymous with function and performance, the...

Documents

Transcript of Multi DomiLED - Dominant Opto Technologies Sdn Bhd · Synonymous with function and performance, the...