MULTI-APPLICATION GRADES FOR UNIVERSAL MACHINING
Transcript of MULTI-APPLICATION GRADES FOR UNIVERSAL MACHINING
CERATIZIT ist eine Hightech-Engineering-Gruppe, spezialisiert auf Werkzeug- und Hartstofftechnologien.Tooling the Futurewww.ceratizit.com
CERATIZIT is a high-technology engineering group specialized in cutting tools and hard material solutions.
The CTPX710 and the CTPX715 are the first multi-application grades from CERATIZIT. The grades offer outstanding performance when machining steel, stainless steel, super alloys and non-ferrous metals.
MULTI-APPLICATION GRADES FOR UNIVERSAL MACHINING
Welcome!
Local Distribution Partner
Technical Sales Engineer
Dragonskin by CERATIZITThe latest generation of coating technologyDecades of experience coupled to consistent and constant development are in the unique Dragonskin coating technology. Thanks to our innovative design and expertise in powder metallurgy, we – and above all you – achieve an unmatched level of performance in machining.
Like the Dragon‘s invulnerability, Dragonskin Coating Technology offers the highest levels of protection against wear and is designed with its impermeable layer for the most adverse requirements. The result is an extremely hard and durable surface with a satin finish.
The perfect combination of state-of-the-art high-performance substrates and new coating structures enable high cutting speeds and increased process reliability. A proven – up to 80 % – increased performance through the latest Dragonskin coating technology offers you a significant competitive advantage.
Dragonskin Coating
Dragonskin – The coatings for the highest performanceThe product category Dragonskin is intended to help make tools easily recognizable and quick to find using CERATIZIT's high-performance coating technology. All products that are marked with the Dragonskin icon represent unmatchable performance, maximum tool life and maximum process reliability.
CTP X7 10/15
P M SNKUniversal application range
*In the future multiple applications possible: turning | grooving | milling
Main application – material
P SteelM Stainless steelK Cast ironN Light and non-ferrous metalsS Super alloys, titaniumH Hard materialsX Universal application
Application
1 Turning2 Milling3 Grooving4 Drilling5 Thread turning6 Others7 Multiple procedures*
Degree of hardness10 ISO 1015 ISO 15...
Grade description
Our X7 Line impresses with universal application options and a wide range of uses.
Our Dragonskin material technologies creates the perfect combination of state-of-the-art high-performance substrates and advanced coating structures that achieves high cutting speeds and increased process security.
▲ The Dragonskin technology guarantees a revolutionary smooth coating without imperfections, resulting in perfect removal of the chips.
▲ The extreme layer thickness guarantees ultimate precision of shape and dimensional stability in the indexable insert.
CERATIZIT Product Manager
▲ CTPX710 is the first multi-application grade for turning from CERATIZIT. It impresses thanks to outstanding performance in the processing of steel, stainless steel, super alloys and non-ferrous metals.
▲ The AITiN coating revamped with Dragonskin technology in connection with the optimized microstructure and a special fine-grained carbide ensure this grade can be used for a wide range of applications.
▲ From now on, users wanting to process several materials only need one grade: the CTPX710. You not only benefit from the universal application options and the excellent machining characteristics. With this grade, you also avoid incorrect applications and improve the clarity of your tool selection.
X7 Line Benefits
4 ceratizit.com
Overview of inserts
Stee
lSt
ainles
s stee
l Ca
st iro
nNo
n-fer
rous
met
alsHe
at re
sista
nt
Geometry
P M K N S CN.. DN.. SN.. VN.. WN.. TN..
Medium -M34 ● ● ○ ○ ● 6 7 8 9 10 11
Medium
-25P ● ● ○ ● ● 12 13 15 17
-25Q ● ● ○ ● ● 12 13 17
-27 ● ● ○ ● ● 12 13 14 15 16 17
Fine -F05 ● ● ○ ○ ● 18 19
Geometry
CC.. DC.. RC.. SC.. TC.. VC..
Positive
Negative
Overview of inserts 5
Indexable inserts, negative 6–11
Indexable inserts, positive 12–19
Technical InformationCutting Data 20–21
Chip Breaker Types and Grade Overview 22
Premium quality tools for high performance. The premium quality tools from the CERATIZIT Performance product line have been designed for specific applications and are distinguished by their outstanding performance. If you have high demands on the performance of your production and want to achieve the very best results, we recommend the Premium tools in this product line.
Table of contents
Matching tool holders and boring bars can be found in our Turning catalog
Turning ToolsIntroduction
5ceratizit.com
CNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)CNMG 43.. CNMG 1204.. 12.9 (.508) 4.76 (.187) 5.16 (.203) 12.7 (.500) D1
RE
IC
80°
SL
CNMG-M34
CTPX710
MCNMG
NEW
ANSI ISO RE Article no.
75 003 ...mm (in)
431EN 120404EN 0.4 (.016) 7500362800432EN 120408EN 0.8 (.031) 7500363000433EN 120412EN 1.2 (.047) 7500363200434EN 120416EN 1.6 (.063) 7500363400
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts CN..
6 ceratizit.com
DNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)DNMG 43.. DNMG 1504.. 15.5 (.610) 4.76 (.187) 5.16 (.203) 12.7 (.500)DNMG 44.. DNMG 1506.. 15.5 (.610) 6.35 (.250) 5.16 (.203) 12.7 (.500)
RE
D1
55°
L S
IC
DNMG-M34
CTPX710
MDNMG
NEW
ANSI ISO RE Article no.
75 004 ...mm (in)
431EN 150404EN 0.4 (.016) 7500461600432EN 150408EN 0.8 (.031) 7500461800433EN 150412EN 1.2 (.047) 7500462000442EN 150608EN 0.8 (.031) 7500463000443EN 150612EN 1.2 (.047) 7500463200
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts DN..
7ceratizit.com
SNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)SNMG 43.. SNMG 1204.. 12.7 (.500) 4.76 (.187) 5.16 (.203) 12.7 (.500)
RE
L S
D1IC
SNMG-M34
CTPX710
MSNMG
NEW
ANSI ISO RE Article no.
75 005 ...mm (in)
432EN 120408EN 0.8 (.031) 7500561800433EN 120412EN 1.2 (.047) 7500562000
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts SN..
8 ceratizit.com
VNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)VNMG 33.. VNMG 1604.. 16.6 (.654) 4.76 (.187) 3.81 (.150) 9.52 (.375)
D1
35°
L S
IC
RE
VNMG-M34
CTPX710
MVNMG
NEW
ANSI ISO RE Article no.
75 009 ...mm (in)
331EN 160404EN 0.4 (.016) 7500961600332EN 160408EN 0.8 (.031) 7500961800333EN 160412EN 1.2 (.047) 7500962000
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts VN..
9ceratizit.com
WNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)WNMG 43.. WNMG 0804.. 8.6 (.339) 4.76 (.187) 5.16 (.203) 12.7 (.500)
D1
L S
RE
IC
WNMG-M34
CTPX710
MWNMG
NEW
ANSI ISO RE Article no.
75 008 ...mm (in)
432EN 080408EN 0.8 (.031) 7500861800433EN 080412EN 1.2 (.047) 7500862000
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts WN..
10 ceratizit.com
TNMGDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)TNMG 33.. TNMG 1604.. 16.5 (.650) 4.76 (.187) 3.81 (.150) 9.52 (.375)TNMG 43.. TNMG 2204.. 22.0 (.866) 4.76 (.187) 5.16 (.203) 12.70 (.500)
D1
RE
60°
IC
L S
TNMG-M34
CTPX710
MTNMG
NEW
ANSI ISO RE Article no.
75 006 ...mm (in)
332EN 160408EN 0.8 (.031) 7500661800
431EN 220404EN 0.4 (.016) 7500662800432EN 220408EN 0.8 (.031) 7500663000433EN 220416EN 1.6 (.063) 7500663400
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
Turning ToolsNegative inserts TN..
11ceratizit.com
CCGTDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)CCGT 21.5.. CCGT 0602.. 6.4 (.252) 2.38 (.094) 2.8 (.110) 6.35 (.250)CCGT 32.5.. CCGT 09T3.. 9.7 (.382) 3.97 (.156) 4.4 (.173) 9.52 (.375)CCGT 43.. CCGT 1204.. 12.9 (.508) 4.76 (.187) 5.5 (.217) 12.70 (.500) RE
80° 7°
IC
L S
D1
CCGT-27
CTPX715-25Q
CTPX710-25P
CTPX710
M M MCCGT CCGT CCGT
NEW NEW NEW
ANSI ISO RE Article no. Article no. Article no.
70 254 ... 70 248 ... 70 248 ...mm (in)
21.5.5FN 060202FN 0.2 (.008) 7025480200 702487020021.51FN 060204FN 0.4 (.016) 7025480400 7024875400 7024870400
32.5.5FN 09T302FN 0.2 (.008) 7025481400 702487140032.51FN 09T304FN 0.4 (.016) 7025481600 7024876600 702487160032.52FN 09T308FN 0.8 (.031) 7025481800 7024876800 7024871800
43.5FN 120402FN 0.2 (.008) 7025482600431FN 120404FN 0.4 (.016) 7025482800 7024877800 7024872800432FN 120408FN 0.8 (.031) 7025483000 7024878000 7024873000
Steel ● ● ●Stainless steel ● ● ●Cast iron ○ ○ ○Non-ferrous metals ● ● ●Heat resistant alloys ● ● ●
Turning ToolsPositive inserts CC..
12 ceratizit.com
DCGTDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)DCGT 21.5.. DCGT 0702.. 7.75 (.305) 2.38 (.094) 2.8 (.110) 6.35 (.250)DCGT 32.5.. DCGT 11T3.. 11.60 (.457) 3.97 (.156) 4.4 (.173) 9.52 (.375)
RE
D1
55° 7°
L
IC
S
DCGT-27
CTPX715-25Q
CTPX710-25P
CTPX710
M M MDCGT DCGT DCGT
NEW NEW NEW
ANSI ISO RE Article no. Article no. Article no.
70 260 ... 70 263 ... 70 263 ...mm (in)
21.5.5FN 070202FN 0.2 (.008) 7026080200 702637020021.51FN 070204FN 0.4 (.016) 7026080400 7026370400
32.5.5FN 11T302FN 0.2 (.008) 7026081400 702637140032.51FL 11T304FL 0.4 (.016) 702637570032.51FN 11T304FN 0.4 (.016) 7026081600 7026375600 702637160032.51FR 11T304FR 0.4 (.016) 702637580032.52FN 11T308FN 0.8 (.031) 7026081800 7026376000 7026371800
Steel ● ● ●Stainless steel ● ● ●Cast iron ○ ○ ○Non-ferrous metals ● ● ●Heat resistant alloys ● ● ●
Turning ToolsPositive inserts DC..
13ceratizit.com
RCGTDesignationANSI ISO S D1 IC
mm (in) mm (in) mm (in)RCGT 0803.. RCGT 0803.. 3.18 (.125) 3.4 (.134) 8 (.315)RCGT 1003.. RCGT 1003.. 3.18 (.125) 4.0 (.157) 10 (.394)
7°
IC S
D1
RCGT-27
CTPX715
MRCGT
NEW
ANSI ISO RE Article no.
70 266 ...mm (in)
0803MOFN 0803MOFN 4 (.157) 7026680200
1003MOFN 1003MOFN 5 (.197) 7026680400
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ●Heat resistant alloys ●
Turning ToolsPositive inserts RC..
14 ceratizit.com
SCGTDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)SCGT 32.5.. SCGT 09T3.. 9.52 (.375) 3.97 (.156) 4.4 (.173) 9.52 (.375)SCGT 43.. SCGT 1204.. 12.70 (.500) 4.76 (.187) 5.5 (.217) 12.70 (.500)
7°
IC
L
RE
D1
S
SCGT-27
CTPX715-25P
CTPX710
M MSCGT SCGT
NEW NEW
ANSI ISO RE Article no. Article no.
70 270 ... 70 283 ...mm (in)
32.51FN 09T304FN 0.4 (.016) 702708040032.52FN 09T308FN 0.8 (.031) 7027080600
432FN 120408FN 0.8 (.031) 7028371600
Steel ● ●Stainless steel ● ●Cast iron ○ ○Non-ferrous metals ● ●Heat resistant alloys ● ●
Turning ToolsPositive inserts SC..
15ceratizit.com
TCGTDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)TCGT 21.5.. TCGT 1102.. 11.0 (.433) 2.38 (.094) 2.8 (.110) 6.35 (.250)TCGT 32.5.. TCGT 16T3.. 16.5 (.650) 3.97 (.156) 4.4 (.173) 9.52 (.375)
7°
RE
60°
D1IC
L S
TCGT-27
CTPX715
MTCGT
NEW
ANSI ISO RE Article no.
70 276 ...mm (in)
21.51FN 110204FN 0.4 (.016) 7027681600
32.52FN 16T308FN 0.8 (.031) 7027683000
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ●Heat resistant alloys ●
Turning ToolsPositive inserts TC..
16 ceratizit.com
VCGTANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)VCGT 22.. VCGT 1103.. 11.1 (.437) 3.18 (.125) 2.9 (.114) 6.35 (.250)VCGT 33.. VCGT 1604.. 16.6 (.654) 4.76 (.187) 4.4 (.173) 9.52 (.375)VCGT 43.5.. VCGT 2205.. 22.1 (.870) 5.56 (.219) 5.5 (.217) 12.70 (.500)
L S
7°IC
35°
D1
RE
VCGT-27
CTPX715-25P
CTPX710
M MVCGT VCGT
NEW NEW
ANSI ISO RE Article no. Article no.
70 280 ... 70 282 ...mm (in)
22.5FN 110302FN 0.2 (.008) 7028081400 7028271400221FN 110304FN 0.4 (.016) 7028081600 7028271600
331FN 160404FN 0.4 (.016) 7028082800 7028272800332FN 160408FN 0.8 (.031) 7028083000 7028273000333FN 160412FN 1.2 (.047) 7028273200
43.57.5FN 220530FN 3.0 (.118) 7028275000
Steel ● ●Stainless steel ● ●Cast iron ○ ○Non-ferrous metals ● ●Heat resistant alloys ● ●
Turning ToolsPositive inserts VC..
17ceratizit.com
DCET-F05
CTPX710
FDCET
NEW
ANSI ISO RE Article no.
76 254 ...mm (in)
0702005FN 0702005FN 0.05 (.002) 762541020021.5XOFN 070201FN 0.15 (.006) 762541060021.50FN 0702015FN 0.10 (.004) 762541040021.5.5FN 070202FN 0.20 (.008) 7625410800
11T3005FN 11T3005FN 0.05 (.002) 762541140032.5XOFN 11T301FN 0.15 (.006) 762541180032.50FN 11T3015FN 0.10 (.004) 762541160032.5.5FN 11T302FN 0.20 (.008) 762541200032.51N 11T304N 0.40 (.016) 7625412200Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
DCETDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)DCET 21.5.. DCET 0702.. 7.75 (.305) 2.38 (.094) 2.8 (.110) 6.35 (.250)DCET 32.5.. DCET 11T3.. 11.60 (.457) 3.97 (.156) 4.4 (.173) 9.52 (.375)
RE
D1
55° 7°
L
IC
S
18 ceratizit.com
Turning ToolsPositive inserts DC..
VCET -F05CTPX710
FVCET
NEW
ANSI ISO RE Article no.
76 255 ...mm (in)
22XOFN 1103005FN 0.15 (.006) 7625511800220FN 110301FN 0.10 (.004) 76255116001103005FN 1103015FN 0.05 (.002) 762551140022.5FN 110302FN 0.20 (.008) 7625512000221FN 110304FN 0.40 (.016) 7625512200
Steel ●Stainless steel ●Cast iron ○Non-ferrous metals ○Heat resistant alloys ●
VCETDesignationANSI ISO L S D1 IC
mm (in) mm (in) mm (in) mm (in)VCET 22 .. VCET 1103.. 11.1 (.437) 3.18 (.125) 2.8 (.110) 6.35 (.250)
L S
7°IC
35°
D1
RE
19ceratizit.com
Turning ToolsPositive inserts VC..
Index Material Strength Material number Material designation Material
number Material designation Material number Material designation
Hardness BHN
P
1.1 General construction steel 240 1.0402 EN3B1.2 Free cutting steel 240 1.0711 EN1A1.3 Hardened steel, non-alloyed 240 1.0401 EN32C1.4 Alloyed hardened steel 300 1.7325 25 CD41.5 Tempering steel, unalloyed 250 1.5752 EN36 1.0535 EN91.6 Tempering steel, unalloyed 300 1.6582 EN241.7 Tempering steel, alloyed 240 1.7225 EN191.8 Tempering steel, alloyed 380 1.8515 EN40B1.9 Steel castings 250 0.9650 G-X 260 Cr 27 1.6750 GS-20 NiCrMo 3.7 1.6582 GS-34 CrNiMo 61.10 Nitriding steel 300 1.8509 EN41B1.11 Nitriding steel 360 1.1186 EN8 1.1160 EN14A1.12 Roller bearing steel 360 1.3505 534A991.13 Spring steel 360 EN45 EN47 EN431.14 High-speed steel 380 1.3343 M2 1.3249 M341.15 Cold working tool steel 380 1.2379 D2 1.2311 P201.16 Hot working tool steel 380 1.2344 H13
M
2.1 Cast steel and sulphured stainless steel 250 1.4581 3182.2 Stainless steel, ferritic 220 1.4000 4032.3 Stainless steel, martensitic 270 1.4057 EN572.4 Stainless steel, ferritic / martensitic 230 1.4028 EN56B2.5 Stainless steel, austenitic / ferritic 250 1.4542 17-4PH2.6 Stainless steel, austenitic 220 1.4305 303 1.4401 316 1.4301 3042.7 Heat resistant steel 330 1.4876 Incoloy 800
K
3.1 Grey cast iron with lamellar graphite 80-110 0.6015 Grade 150 0.6020 Grade 220 0.6025 Grade 2603.2 Grey cast iron with lamellar graphite 90-150 0.6030 Grade 300 0.6035 Grade 350 0.6040 Grade 4003.3 Gray cast iron with spheroidal graphite 90-150 0.7040 SG 400-12 0.7043 SG 370-17 0.7050 SG 500-73.4 Gray cast iron with spheroidal graphite 150-270 0.7060 SG 600-3 0.7070 SG 700-2 0.7080 SG 800-23.5 White malleable cast iron 90-130 0.8035 GTW-35 0.8045 GTW-453.6 White malleable cast iron 150-190 0.8055 GTW-55 0.8065 GTW-653.7 Black malleable cast iron 90-130 0.8135 GTS-35 0.8145 GTS-453.8 Black malleable cast iron 150-240 0.8155 GTS-55 0.8170 GTS-70
N
4.1 Aluminum (non-alloyed, low alloyed) 110 3.0255 1050 A 3.0275 1070 A 3.0285 1080 A (A8)4.2 Aluminum alloys < 0.5 % Si 150 3.1325 2017 A (AU4G) 3.4335 7005 (AZ5G) 3.4365 7075 (AZ5GU)4.3 Aluminum alloy 0.5–10 % Si 120 3.2315 A- G S1 3.2373 A-S9 G 3.2151 A-S 6 U44.4 Aluminum alloys 10–15 % Si 120 3.2581 A-S12 3.2583 A-S12 U4.5 Aluminum alloys > 15 % Si 120 A-S18 A-S17 U44.6 Copper (non-alloyed, low alloyed) 110 2.0040 Cu-c1 2.0060 Cu-a1 2.0090 Cu-b14.7 Copper wrought alloys 210 2.1247 Cub2 (Berylium Copper) 2.0855 CuN2S (Nickel Copper) 2.1310 CU-Fe2P4.8 Special copper alloys 80 2.0916 Cu-A5 2.1525 Cu-S3 M Ampco 8 (Cu-A6Fe2)4.9 Special copper alloys 90 2.0978 Cu-Al11 Fe5 Ni5) Ampco 18 (Cu- A10 Fe3)4.10 Special copper alloys 90 2.1247 Cu Be2 Ampco M4 4.11 Short-chipping brass, bronze, red bronze 180 2.0331 Cu Zn36 Pb1,5 2.0380 Cu Zn39 Pb2 (Ms 56) 2.0410 Cu Zn44 Pb24.12 Long-chipping brass 180 2.0335 Cu Zn 36 (Ms63) 2.1293 Cu Cr1 Zr4.13 Thermoplastics PE PVC PS Polystyrene Plexiglas4.14 Duroplastics PF Bakelite Pertinax4.15 Fiber-reinforced plastics Carbon Fiber Fibreglass Aramid Fibre (Kevlar)4.16 Magnesium and magnesium alloys 250 3.5812 Mg A7 Z1 3.5662 Mg A9 3.5105 Mg Tr3 Z2 Zn 14.17 Graphite R8500X R8650 Technograph 154.18 Tungsten and tungsten alloys W-Ni Fe (Densimet) W- Ni Cu (Inermet) Denal4.19 Molybdenum and molybdenum alloys TZM MHQ Mo W
S
5.1 Pure nickel 2.4066 Ni99 (Nickel 200) 2.4068 Lc Ni99 (Nickel 201)5.2 Nickel alloys 1.3912 Fe-Ni36 (Invar) 1.3917 Fe -Ni42 (N42) 1.3922 Fe-Ni48 (N48)5.3 Nickel alloys 250 2.4375 Ni Cu30 Al (Monel K500) 2.4360 Ni Cu30Fe (Monel 400) 2.46685.4 Nickel molybdenum alloys 2.4600 Ni Mo30Cr2 (Hastelloy B4) 2.4617 Ni Mo28 (Hastelloy B2) 2.4819 Ni Mo16Cr16 Hastell. C2765.5 Nickel-chromium alloys 380 2.4951 Ni Cr20TiAl (Nimonic 80A) 2.4858 Ni Cr21Mo (Inconel 825) 2.4856 Ni Cr22Mo9Nb Inconel 6255.6 Cobalt Chrome Alloys 380 2.4964 Co Cr20 W15 Ni10 Co Cr20 Ni16 Mo7 Co Cr28 Mo 65.7 Heat resistant alloys 380 1.4718 Z45 C S 9-3 1.4747 Z80 CSN 20-02 1.4845 Z12 CN 25-205.8 Nickel-cobalt-chromium alloys 410 2.4851 Ni Cr23Fe (Inconel 601) 2.4668 Ni Cr19NbMo (Inconel 718) 2.4602 Ni Cr21Mo14 Hastelloy C225.9 Pure titanium 270 3.7025 T35 (Titanium Grade 1) 3.7034 T40 (Titanium Grade 2) 3.7064 T60 (Titanium Grade 4)5.10 Titanium alloys 210 T-A6-Nb7 (367) T-A5-Sn2-Mo4-Cr4 (Ti17) T-A3-V2,5 (Gr18)5.11 Titanium alloys 360 3.7165 T-A6-V4 (Ta6V) T-A4-3V-Mo2-Fe2 (SP700) T-A5-Sn1-Zr1-V1-Mo (Gr32)
H
6.1
Tempered steel
<45 HRC6.2 46-55 HRC6.3 56-60 HRC6.4 61-65 HRC6.5 65-70 HRC
Material examples referring to the cutting data tables
Turning ToolsCutting data
20 ceratizit.com
CTPX710 CTPX710 CTPX710 CTPX715-CF05 -M34 -25P / -25Q -27
Index vc in SFM1.1 400-565 330-495 400-565 330-4951.2 465-660 400-595 465-660 400-5951.3 365-530 300-465 365-530 300-4651.4 300-495 235-430 300-495 330-4951.5 300-495 235-430 265-495 235-4301.6 330-430 300-400 330-430 300-4001.7 265-465 235-430 265-465 235-4301.8 265-430 235-400 265-430 235-4001.9 265-400 235-365 265-400 235-3651.10 265-400 235-365 265-400 235-3651.11 265-465 235-430 265-465 235-4301.12 430-730 365-595 430-730 365-6601.13 265-400 235-365 265-400 235-3651.14 235-430 200-400 235-430 200-4001.15 235-430 200-400 235-430 200-4001.16 235-330 200-400 235-430 200-4002.1 300-860 430-795 300-860 265-7952.2 265-795 430-730 265-795 235-7302.3 235-795 365-730 235-795 200-7302.4 135-730 365-660 135-730 100-6602.5 200-760 330-565 200-760 165-6952.6 135-565 265-495 135-465 100-4952.7 135-530 265-465 135-530 100-4653.1 465-795 400-730 465-795 400-7303.2 330-630 300-595 330-630 300-5953.3 430-860 365-795 430-860 365-7953.4 330-825 300-760 330-825 300-7603.5 530-795 465-730 530-795 465-7303.6 430-660 365-595 430-660 365-5953.7 495-795 430-730 495-795 430-7303.8 465-695 400-630 465-695 400-6304.1 990-10560 990-10560 925-99004.2 660-9240 660-9240 595-85804.3 1320-6600 1060-4950 1320-6600 1255-62704.4 135-6600 1320-4290 1320-6600 1155-62704.5 660-3960 495-2970 660-3960 595-36304.6 825-3300 660-2640 825-3300 760-31354.7 660-3300 530-2475 660-3300 630-31354.8 660-3300 530-2475 660-3300 630-31354.9 660-3300 530-2310 660-3300 630-31354.10 660-3300 530-2310 660-3300 630-31354.11 495-2640 495-1980 495-2640 465-24754.12 495-1650 400-1225 495-1650 465-14854.13 330-825 330-825 300-7954.14 265-660 265-660 235-6304.15 265-730 265-730 235-6954.164.174.18 265-400 165-400 265-400 235-3654.19 330-465 200-400 330-465 300-4305.1 100-465 100-430 100-465 100-4305.2 100-365 100-330 100-365 100-3305.3 100-365 100-330 100-365 100-3305.4 100-365 100-330 100-365 100-3305.5 100-365 100-330 100-365 100-3305.6 100-365 100-330 100-365 100-3305.7 100-365 100-330 100-365 100-3305.8 100-365 100-330 100-365 100-3305.9 100-465 100-430 100-465 100-4305.10 100-465 100-430 100-465 100-4305.11 100-400 100-365 100-400 100-3656.16.26.36.46.5
Cutting data standard values for fine machining (F) (-F05), medium machining (M) (-M34) and aluminum chip breakers (-25P, -25Q, -27)
The cutting data depends extremely on the external conditions, e.g. stability of the tool and tool clamping, material and machine type. The indicated values are possible cutting data which have to be increased or reduced according to the application conditions.
Turning ToolsCutting data
21ceratizit.com
Negative ModelSmooth cut Irregular cutting depth Interrupted cut Sectional illustration
Geom
etry
ap in
f ipr
Main
appl
icatio
ns
supe
r allo
ys
-M34 CTPX710 CTPX710
15° 0,25
CN..DN..SN..VN..WN..TN..
▲ First choice for superalloys ▲ Light cutting geometry ▲ Minimal built-up edge ▲ Low cutting forces
CTPX710 CTPX710
CTPX710 CTPX710
CTPX710 CTPX710 .0315-.1185
.0040-.0120CTPX710 CTPX710
Positive
Main
appl
icatio
n non
-ferro
us m
etals
, se
cond
ary a
pplic
ation
stain
less s
teels,
stee
ls, su
per a
lloys
, cas
t iron
-25P CTPX710 CTPX710
20°
CC..DC..SC..VC..
▲ Sharp cutting edge ▲ Good chip control on soft
aluminum alloys ▲ Low adhesion
CTPX710 CTPX710
CTPX710 CTPX710
CTPX710 CTPX710 CTPX710 .0200-.1775
.0020-.0240CTPX710 CTPX710
-25Q CTPX710 CTPX710
20°
CC..DC..
▲ Wiper geometry ▲ High feed rates ▲ High surface quality ▲ Good chip control on soft
aluminum alloys ▲ Low adhesion
CTPX710 CTPX710
CTPX710 CTPX710
CTPX710 CTPX710 CTPX710 .0020-.2560
.0020-.0240CTPX710 CTPX710
-27 CTPX715 CTPX715
19°–
25°
CC..DC..RC..SC..TC..VC..
▲ The universal Al geometry ▲ Sharp cutting edge ▲ Extremely positive rake
angle ▲ Low adhesion ▲ High feed rates
CTPX715 CTPX715
CTPX715 CTPX715
CTPX715 CTPX715 CTPX715 .0395-.3940
.0040-.0300CTPX715 CTPX715
Main
appl
icatio
n sup
er al
loys
and
stain
less s
teels
, sec
onda
ry ap
plica
tion
steels
and n
on-fe
rrous
meta
ls
-F05
F
CTPX710
18°
DC..VC..
▲ Maximum tolerance class ▲ Outstanding chip control,
even with the smallest cutting depths
▲ Very low cutting forces
CTPX710
CTPX710
CTPX710.0039- .0984
.0010- .0098CTPX710
Standard chip breakers/application tips
M
FM
M
MR
Grade description ▲ Carbide, AlTiN-coated ▲ ISO | P10 | M10 | K10 | N10 | S15 ▲ Universal multi-material grade from the X7 line for
highest machining requirements
▲ Carbide, AlTiN-coated ▲ ISO | P10 | M10 | K10 | N10 | S15 ▲ Universal multi-material grade from the X7 line for
highest machining requirements
CTPX710 CTPX715
Turning ToolsTechnical Information
22 ceratizit.com
23ceratizit.com
UNITED. EXPERIENCED. METAL CUTTING.
The product brand CERATIZIT stands for high-quality indexable insert tools. The products are characterized by their high quality and contain the DNA of many years of experience in the development and production of carbide tools.
SPECIALIST FOR INDEXABLE INSERT TOOLS FOR TURNING, MILLING AND GROOVING
WNT is synonymous with product diversity: solid carbide and HSS rotating tools, tool holders and efficient workholding solutions are all part of this brand.
EXPERTS FOR ROTATING TOOLS, TOOL HOLDERS AND CLAMPING SOLUTIONS
Solid carbide drills specially developed for the aerospace industry bear the product name KLENK. The highly specialized products are specifically designed for machining lightweight materials.
CUTTING TOOLS FOR THE AEROSPACE INDUSTRY
High-precision drilling, reaming, countersinking and boring is a matter of expertise: efficient tooling solutions for drilling and mechatronic tools are therefore part of the KOMET brand name.
THE QUALITY LABEL FOR EFFICIENT BORE PRODUCTION
CERATIZIT USA, Inc.11355 Stephens RoadUS-Warren, MI 48089-1833Toll free +1-800-783-2280T. +1-586-759-2280E. [email protected]
Technical Assistance HotlineToll free +1-888-706-2664E. [email protected]
CERATIZIT Chicago Inc.2050 Mitchell BoulevardUS-Schaumburg, IL 60193-4544Toll free +1-800-656-6381T. +1-847-923-8400E. [email protected]
7003
617