MU 800 TOGGLE GLAZED SYSTEM - Curran Alu...Page : 1.2.06 MU 800 TOGGLE GLAZED SYSTEM Glazing detail...
Transcript of MU 800 TOGGLE GLAZED SYSTEM - Curran Alu...Page : 1.2.06 MU 800 TOGGLE GLAZED SYSTEM Glazing detail...
MU 800 TOGGLE GLAZED SYSTEMMullions and transomsScale NTS
Page : 1.2.01
MU 798MULLION
Revision :
Ixx = 364.11Iyy = 51.9
Ixx = 253.8Iyy = 46.1
Ixx = 138.4Iyy = 38.14
MU 782MULLION
MU 795MULLION
145
125
96
165
145 11
6
55 55 55
Ixx = 355.2Iyy = 51.4
Ixx = 252.6Iyy = 45.6
Ixx = 143.3Iyy = 37.6
MU 799TRANSOM
MU 794TRANSOM
MU 796TRANSOM
154 13
3
105
165 14
5 116
55 55 55
SleevedIxx = 220Iyy = 50.6
Sleeved
Sleeved
Ixx = 425.7Iyy = 60.8
Ixx = 628.6Iyy = 68.1
Page : 1.2.02
Transom sealing/
CWG 014
CWG 010
(MU 893)end gasket
gaskets and accessoriesScale NTS
MU 800 TOGGLE GLAZED SYSTEM
G1550
T 113Transom Jig
Mullion JigT112Stepped drill bit
CWA 030No. 8 x 19 tamper
Drill bit to suittransom screw T 114
CWA 031
proof transom screw
Revision :
Punch press for curtain wall transoms
Heads for punch toolSmall Medium Large
Transom drainedholes for cleats
Mullion drainedholes for cleats
Mullion drainedholes for transomfixing screws(Oval head)
A B C
Punch press
Punch toolA B C
CWATB
24 / 28mm glazing -Transom gasket
24 / 28mm glazing -Mullion gasket
Isolator for28mm Units
MU844
on spans and weights)(optional- dependsTransom cleat
Ixx = 143 cm4
TOG02C17.2mmToggle
MU 830Joint sleeve forMU895/795
Ixx = 62.4 cm4
MU 832Joint sleeve forMU882/782
MU 732Joint sleeve forMU798
Ixx = 227.5 cm4
TOGCLS6Closer section for 6mmglass inside and out
TOG06C1Glass support plate -6/6mm glazing
TOG05C17.2mm halfToggle
TOGCLS8Closer section for 8mmglass inside and out
20
TOG07C1Glass support plate -8/8mm glazing
24
MU 800 TOGGLE GLAZED SYSTEMBracketsScale NTS
Page : 1.2.03Revision :
CWB001 - individual code
CWB002 - individual code
100
25
1140
19 19
25 25 25 25
R4 R6
100
FIXING BRACKET
49189
73
7359
59
90
60
90
145
MU 838 - Bar length code (5.8m)
FIXING BRACKETMU 806 - Bar length code (5.8m)
FIXING BRACKETMU 839 - Bar length code (5.8m)
MU 800 TOGGLE GLAZED SYSTEMIxx values for mullions with sleevescale NTS
Page : 1.2.04Revision :
145
125 96
165
145 11
6
Ixx = 220Iyy = 50.6
Ixx = 425.7Iyy = 60.8
Ixx = 628.6Iyy = 68.1
MU 798 MU 782 MU 795
MU 732
MU 832
MU 830
Transom
G 1516
Mullion
MU 800 TOGGLE GLAZED SYSTEMProfile assemblyScale NTS
Page : 1.2.05
behind transFixing holes
Note: MU 844 cleat to be usedwhen double glazed unitexceeds 100 Kg's and ortransoms spans more that2.5m.
Revision :
Sleeve sectionnotched to allowcorrect fitting ofcill pressings
Sleeve to be screwed intoposition with S/S CSKscrews
Once in correctposition the sleeveis to be fully seamwelded to the plate
TOG03CGlass support plate
Page : 1.2.06
MU 800 TOGGLE GLAZED SYSTEMGlazing detailScale NTS
Revision :
32
21
6
5
36
21
8
5
25 32
3266
21Backing rod byglazing contractor
Glass support byglazing contractor
AMS toggle
Suitable sealant
Notes:• Toggles in 100mm from each corner
and at 300mm C/C thereafter.• Suitable glass packers to be used
and to support both panes of glass.outer pane to have at least 60%support on glass packer and supportplate.
• Glass packet to be of suitablematerial so as not to damage glassand also support glass weight,contact glass supplier for advice onsuitable packers.
Page : 1.2.07
MU 800 TOGGLE GLAZED SYSTEMTypical head/cill detailScale NTS
Revision :
21
DPM glazedinto system
Pressed aluminiumcills
Continuous sealand backing rod
MU 796
Membrane bondedto concrete andglazed into system
Backing rod andsilicone sealant
Closer section withpressing to detail
Internalfinish todetail
MU 796
21
32
32
21
Before fitting lowerglass unit, theCloser profile isscrew fixed totransom. Then theOuter pressing isfitted to the closer
36
32
When installing 6/6mmglazing use closer profileTOG06C1
When installing 8/8mmglazing use closer profileTOG07C1
Page: 1.2.08
MU 800 TOGGLE GLAZED SYSTEMTypical fixing detailScale 1:2
300
min
20
Insulated panel - depthto suit specificationrequirements
MU 796
Revision :
MU 796
2121
Pressed trays fixed tocloser section andtoggle into system
Page: 1.2.09
MU 800 TOGGLE GLAZED SYSTEMTypical fixing detailScale 1:2
Revision :
MU 796
TS6 022Open out, internallybeaded door.
100
140
68
5
MU 796
TS6 024Open in, internallybeaded door
TS6 024
3821
HL 561
100
127
TS6 210
MU 796
CDM 114
CDM 032
CDM 112
24
32
129
46
Commercialdouble swing door
Section 1.2.10
MU 800 TOGGLE GLAZED SYSTEMTypical jamb detailScale 1:2
MU 795
Revision :
MU 795
21
AMS fixingbracket
MU 795
36
32
When installing 6/6mmglazing use closer profileTOG06C1
When installing 8/8mmglazing use closer profileTOG07C1
Section 1.2.11
MU 800 TOGGLE GLAZED SYSTEMTypical door detailsScale 1:2
Revision :
100
140
685
TS6 024Open in, internallybeaded door
TS6
024
3821
HL
561
100
127
TS6
210
Commercialdouble swing door
24
TS6 022Open out, internallybeaded door.
575
Section 1.2.12
MU 800 TOGGLE GLAZED SYSTEMCorner detailScale 1:2
MU 795
Revision :
MU 795
MU 795
MU 795
36
32
When installing 6/6mmglazing use closer profileTOG06C1
When installing 8/8mmglazing use closer profileTOG07C1