MTG Track Gate Datasheet
2
Vehicle Access - Sliding Gates MTG Track Gate The MTG Track Slide Gate system is ideal for industrial and high usage applications with very large gate openings. Utilising ground tracks, the MTG Track Gate can accomodate a clear opening of up to 20 metres. This track gate is designed to operate at variable speeds dependant on the type of drive technology used. Safety Devices Standard safety devices include PE beams, inductive loop detectors and signage for use on automatic gate systems. Optional safety devices include flashing lights, audible alarms, safety edge strips, safety light curtains and polycarbonate clear safety screens. Drive System The construction of the MTG gate system allows for a variety of motors and controllers to be used dependant on the required duty cycle of the gate. A typical motor drive supplied by Magnetic Automation is the MSL20. Please contact your local Magnetic Automation office for further details. Construction Fully welded Australian made RHS steel is used in the gate frame, back runner and support posts, with 25 x 25mm RHS uprights. All fabricated steel is hot dipped galvanized for total protection and maximum life span. The MTG Sliding gate allows for single leaf spans of up to 20 metres. Powder coating is optional from a wide selection of powder coating colours. All rollers are supplied with sealed ball bearings which are designed to exceed gate loads and are capable of 100% duty cycle. Accessories A variety of accessories are available such as climb protection - spikes, barbed wire and pressed spears; uninterrupted power supply, steel cladding and chain wire mesh. Bi-parting gates can also be applied to wide roadways. Security & Safety Solutions for your Perimeter Protection DS_MTG_10/13 | Subject to change without prior written notice. www.magneticautomation.com.au National Sales & Service - 1300 364 864 Swing Cantilever Track
-
Upload
magnetic-automation-pty-ltd -
Category
Documents
-
view
268 -
download
3
description
Ideal for industrial and high usage applications with very large gate openings.
Transcript of MTG Track Gate Datasheet
Vehicle Access - Sliding Gates
MTG Track Gate
The MTG Track Slide Gate system is ideal for industrial and high usage applications with very large gate openings. Utilising ground tracks, the MTG Track Gate can accomodate a clear opening of up to 20 metres. This track gate is designed to operate at variable speeds dependant on the type of drive technology used.
Safety Devices
Standard safety devices include PE beams, inductive loop detectors and signage for use on automatic gate systems. Optional safety devices include flashing lights, audible alarms, safety edge strips, safety light curtains and polycarbonate clear safety screens.
Drive System
The construction of the MTG gate system allows for a variety of motors and controllers to be used dependant on the required duty cycle of the gate. A typical motor drive supplied by Magnetic Automation is the MSL20. Please contact your local Magnetic Automation office for further details.
Construction
Fully welded Australian made RHS steel is used in the gate frame, back runner and support posts, with 25 x 25mm RHS uprights. All fabricated steel is hot dipped galvanized for total protection and maximum life span. The MTG Sliding gate allows for single leaf spans of up to 20 metres. Powder coating is optional from a wide selection of powder coating colours. All rollers are supplied with sealed ball bearings which are designed to exceed gate loads and are capable of 100% duty cycle.
Accessories
A variety of accessories are available such as climb protection - spikes, barbed wire and pressed spears; uninterrupted power supply, steel cladding and chain wire mesh. Bi-parting gates can also be applied to wide roadways.
Security & SafetySolutions for your
Perimeter Protection
DS_
MTG
_10/
13 |
Subj
ect t
o ch
ange
with
out p
rior w
ritte
n no
tice.
www.magneticautomation.com.auNational Sales & Service - 1300 364 864
Swin
gCa
ntile
ver
Trac
k
www.magneticautomation.com.au
DS_
MTG
_10/
13 |
Subj
ect t
o ch
ange
with
out p
rior w
ritte
n no
tice.
National Sales & Service1 3 0 0 3 6 4 8 6 4
Technical Data Type MTG
Maximum Gate Opening Length mm 20,000
Standard Gate Height (custom heights available) mm 2,150
Warranty 1 year
Diagrams provided for information purposes only
±0.5°
Mag PNo:A2240-03
TRACK GATE 6.0MRIGHT HAND LAYOUT
?
NTS
A3
L G
18-10-06
MILD STEEL
HOT DIP GAL
0.50.20.1
1 OF 1
