msian-std-list.pdf

7/27/2019 msian-std-list.pdf

1/7

LIST OF MALAYSIAN STANDARDS RELATED TOTIMBER & TIMBER PRODUCTS PUBLICATIONS

No. MALAYSIAN STANDARDS TITLE SELLINGPRICE(RM)

1 MS 228: 1991 Specification For Plywood 70

2 MS 229: 1988 Nomenclature And Uses Of Commercial Timbers In (under revision)Malaysia

20

3 MS 289: 1987 Specification For Aluminium Finishing Paint For Wood And Metal Surfaces 10

4 MS 360: 1991 Specification For Treatment Of Timber With Wood Copper/ (under revision) Chromel/ Arsenic Preservatives

20

5 MS 432: 1976 Specification For Single Pact Varnishes For Wooden Panelling 20

6 MS 471: Part 1: 2001 Glossary Of Terms Relating To Timber And Wood-based Panel Products.Part 1: Characteristics and properties of Timber (First Revision)

50

7 MS 471: Part 2 : 2003 Glossary Of Terms Relating To Timber And Wood-based Panel Products.Part 2: Wood-based Panel Products

30

8 MS 471: Part 3: 2003 Glossary Of Terms Relating To Timber And Wood-based Panel ProductsPart 3: Carpenty, Joinely And Furniture

40

9 MS 483: 1976 Vocabulary Of Terms Relating To Pallets 20

10 MS 544: 2001 : Part 1 Code Of Practice For The Structural Use Of Timber Part 1: General 20

11 MS 544: 2001 : Part 2 Code Of Practice For The Structural Use Of Timber Part 2: Permissible stressdesign of solid timber

70


2/7

12 MS 544: 2001 : Part 3 Code Of Practice For The Structural Use Of Timber Part 3: Permissible stressdesign of glued laminated timber

40

13 MS 544: 2001 : Part 4 : Section 1 Code Of Practice For The Structural Use Of Timber Part 4: Timber panelproducts. Section 1: Structural plywood

20

14 MS 544: 2001 : Part 4 : Section 2 Code Of Practice For The Structural Use Of Timber Part 4 : Timber panelproducts. Section 2 : Marine plywood

10

15 MS 544: 2001 : Part 4 : Section3 Code Of Practice For The Structural Use Of Timber Part 4 : Timber panelproducts. Section 3 : Cement bonded particleboard

20

16 MS 544: 2001 : Part 4 : Section 4 Code Of Practice For The Structural Use Of Timber Part 4 : Timber panelproducts. Section 4 : Oriented strand board

20

17 MS 544: 2001 : Part 5 Code Of Practice For The Structural Use Of Timber Part 5: Timber joints 50

18 MS 544: 2001 : Part 6 Code Of Practice For The Structural Use Of Timber Part 6: Workmanship,inspection and maintenance

20

19 MS 544: 2001 : Part 7 Code Of Practice For The Structural Use Of Timber Part 7: Testing 10

20 MS 544: 2001 : Part 9 : Section 1 Code Of Practice For The Structural Use Of Timber Part 9: Fire resistance oftimber structures. Section 1 : Method of calculating fire resistance oftimber members

20

21 MS 544: 2001 : Part 10 Code Of Practice For The Structural Use Of Timber Part 10: Preservative

treatment of structural timbers

30

22 MS 544: 2001 : Part 11 : Section 1 Code Of Practice For The Structural Use Of T imber Part 11:Recommendation for the calculation basis for span tablesSection 1 : Domestic floor joists

30

23 MS 544: 2001 : Part 11: Section 2 Code Of Practice For The Structural Use Of Timber Part 11:Recommendation for the calculation basis for span tables. Section 2 :Ceiling joists

30


3/7

24 MS 544: 2001 : Part 11 : Section 3 Code Of Practice For The Structural Use Of T imber Part 11:Recommendation for the calculation basis for span tablesSection 3 : Ceiling binders

30

25 MS 491: 1977 Code Of Practice For Guarding And Safe Use Of Wood (under revision)working Machinery

50

26 MS 652:1980 Specification For Pentachlorophenol For Use In The Preservation OfTimber

10

27 MS 695: 1981 Specification For Nitro-Cellulose Lacquer For The Use In Wood, Indoors 20

28 MS 697: 1981 Guide To The Choice, Use And Application Of Wood Preservatives 20

29 MS 733: 1992 Specification For Copper/Chrome/Arsenic Wood Preservatives (First

revision)

20

30 MS 734: 1981 Specification For Wood Preservation By Means Of Pressure Creosoting 20

31 MS 758: 2001 Glued laminated timber Performance requirements and minimumproduction requirements

50

32 MS 821: 1994 Methods For The Quantitative Analysis Of Copper/Chrome/ArsenicPreservative Formulations And Treated Timber

20

33 MS 822: 1983 Specification For Sawn Timber Foundation Piles 20

34 MS 833: 1984 Method For The Qualitative Analysis Of Wood Preservatives And TreatedTimber

20

35 MS 834: 1984 Method For The Quantitative Analysis Of Copper Naphthenate AndTreated Timber

20

36 MS 835: 1984 Method For Quantitative Analysis Of BIS (Tri-butyltin) Oxide PreservativeFormulations And Treated Timber :Determination Of Total Tin

20


4/7

37 MS 836:1984 Specification For Tri Butyltin Oxide Wood Preservatives 10

38 MS 837: 1985 Method For The Determination Of Moisture Content Of (under revision)

Timber

20

39 MS 878: 1984 Specification For Copper Naphthenate Wood Preservative 40

40 MS 908: 1984 Specification For Synthetic Resin Adhesives (Phenolic And Aminoplastic)For Plywood

20

41 MS 934: 1986 Specification For Wood Cement Boards 30

42 MS 995: 1986 Specification For Boron Timber Preservatives 20

43 MS 1002:1986 Specification For Surface Brush-On Preservative Stains For Wood 20

44 MS 1030: 1986 Glossary Of Terms Used In Wood Preservation 20

45 MS 1036: 1986 Specification For Wood Chipboard And Method Of Test (under revision)For Particleboard

60

46 MS 1043: 1986 Method For Quantitative Analysis Of Preservative Solutions And TreatedTimber PCP and PCPL

10

47 MS 1123: 1988 Specification For Blockboard And Laminboard 30

48 MS 1170: 2000 Specification For Double-deck Flat Wooden Pallets For Through Transit OfGoods

10

49 MS 1174: 2000 Specification For Large Wooden Pallets For Through Transit Of Good 10

50 MS 1215: 1991 : Part 1 Method Of Test For Finishes For Wooden Furniture :-Part 1: Assessment of glare by measurement of specular gloss 60C &85C

10


5/7

51 MS 1215 : 1991 : Part 2 Part 2: Assessment of surface resistance to wet heat 20

52 MS 1215 : 1991 : Part 3 Part 3: Assessment of surface resistance to dry heat 20

53 MS 1215 : 1991 : Part 4 Part 4: Assessment of surface resistance to liquids 20

54 MS 1215 : 1991 : Part 5 Part 5: Assessment of surface resistance to cold oils and liquids 10

55 MS 1215 : 1991 : Part 6 Part 6: Assessment of surface resistance to mechanical damage 30

56 MS 1246 : 1993 : Part 2 Part 2: Method for determination of stability of chairs and stools 20

57 MS 1246 : 1993 : Part 3 Part 3: Method for determination of strength of settees 30

58 MS 1246: 1993 : Part 4 Part 4: Method for determination of stability of settees 10

59 MS 1246: 1993: Part 5 Part 5: Method for determination of strength of tables and trolleys 20

60 MS 1246: 1993 : Part 6 Part 6: Method for determination of stability of tables and trolleys 10

61 MS 1581 Part 1 : 2003 Furniture. Storage Units. Part 1: Safety requirements and test method 20

62 MS 1581 Part 2 : 2003 Furniture. Storage Unit s Part 2: Method for determination of strength anddurability 30

63 MS 1581 Part 3 : 2003 Furniture. Storage Units Part 3: Method for determination of stability 20

64 MS 1300: 1993 Specification For Tributylin Naphthenate Wood Preservative 10

65 MS 1301: 1993 Specification For Single Packed Polyurethane Modified Alkyd Varnish For Wooden Floors

20

66 MS 1302: 1993 Specification For Light Organic Solvent Preservative (LOSP) Treatment OfTimber

20


6/7

67 MS 1379: 1995 Method For Analysis Of Treated Wood And Treating Solutions By X-raySpectroscopy

30

68 MS 1401: 1996 Grading Rule For Dressed Timber, Door Jambs And General Mouldings 40

69 MS 1429: 1998 Specification For Medium Density Fibreboards(MDF) (under revision)

50

70 MS 1446: 1998 Code Of Practice For The Operation Of Timber Treatment Plants 20

71 MS 1506: 2000 Specification For Wooden Door 50

72 MS 1714: 2003 Specification For Visual Strength Grading Of Tropical Hardwood Timber 40

73 MS 1786: 2005 Wood-based panels Fireboard, particleboard and oriented strand

board Terminology

10

74 MS 1787: Part 1: 2005 Wood-based panels Part 1: Determination of dimensions of panels 10

75 MS 1787: Part 2: 2005 Wood-based panels Part 2: Sampling and cutting of test pieces 10

76 MS 1787: Part 3: 2005 Wood-based panels Part 3: Determination of dimensions of test pieces 10

77 MS 1787: Part 4: 2005 Wood-based panels Part 4: Determination of moisture content 10

78 MS 1787: Part 5: 2005 Wood-based panels Part 5: Determination of density 10

79 MS 1787: Part 6: 2005 Wood-based panels Part 6: Determination of swelling in thickness after immersion in water

10

80 MS 1787: Part 7: 2005 Wood-based panels Part 7 : Determination o f dimensional changesassociated with changes in relative humidity

20

81 MS 1787: Part 8: 2005 Wood-based panels Part 8: Determination of moisture resistance under cyclic test conditions

10


7/7

82 MS 1787: Part 9: 2005 Wood-based panels Part 9: Determination of surface soundness 20

83 MS 1787: Part 10: 2005 Wood-based panels Part 10: Determination of modulus e lasticity inbending and of bending strength

10

84 MS 1787: Part 11: 2005 Wood-based panels Determination of tensi le strength perpendicular tothe plane of the panel

10

85 MS 1787: Part 12: 2005 Wood-based panels Part 12: Determination of wet bending strength 10

86 MS 1787: Part 13: 2005 Wood-based panels Part 13: Determination of screw holding ability 10

87 MS 1787: Part 14: 2005 Wood-based panels Part 14: Determination of formaldehyde contentby perforator method

20

88 MS 1787: Part 15: 2005 Wood-based panels Part 15: Determination of formaldehyde emission Dessicator method

20

msian-std-list.pdf

Documents

Transcript of msian-std-list.pdf