843825 ANDEROL GO24 Hour Emergency N\1mber: 973 -887-741124 Hour ~ Number : 800~424~9300

2/99 THlT 07: 28 FAX 97,ANDEROL CompanySpecj.al"ty Lubricant:s

Approval Date: March 26. 1996 Page: 1 ~

Print Date: Februa.a 07. 1997 MSDS Number: 042710SBL-23 -~

1. CHEMIcAL PRODUCT .AND COMPANY IDENTIFICATION ~R5 ~ ~ ~

Produc~ Name: PQ@ AA 90 Food Grada O~Prod~ct N~ber; 0427105Synopyms : ~eral Oil Based LubricantProduct Use/Class: Food grade lubricant

Suppl ie.r /ManU£acture~ANDEROL Company215 Merry LaneSast. r~anove-r .NJ 07936EnviroDmental and Regula'tory Affairs. In£E)rmati.on Number : 973-"Et~7-7~1n

2. COME'OSITION/~ION ON INGREt)!ENTS

This product does no~ contain any componen~s cons~dered to be heal thhazards UDder the OSBA Hazard C~cation Standard 29 CER 1910.1200 orunder the WHMIS Con~rolled Product Regu1at~ons .in Canada.

3 .HAZARDS I])ENTIFICATION

...EMERGENCY OVERVIEW ...:Low ha~ard £or usual ~dustria1 handling .

POTENTIAL HEALTH EFFEr:xS

Eye Con'ta.ct:No hazatd expec~ed in normal UBe .

Skin Contact:No hazard expected in no~ use

Irih~at.i.on:Brea~g of ~st may cause ~rrita~ion of nasal and resp~ra~ory

passages.

Xnges'tion:No hazard expected in normal use. Aspira~ion of this produc~ into theresp~ra~ory sys~em dur~g ~ges~ion or vomit~g. ~y cause mdld to severe

p~onary injury.

MSDS Continued on Page 2

07/22/99 THU 07:28 FAX 9738843825 ANDEROL CO I(!dUV"/V'

Produc~ Name: ~ AA 90 Food Grade Oil.Approval Da~e: Marcb 26, 1996 Page: 2~rin~ Da~e: Februaa 07. 1997 MSDS Number: 0427105 BL-23 -

4 -FIRST AID HEAStmF.S

FIRST AID

ObtainEye Contact:

In cese 0£ con~ac~ .immediately flush eyes ~ th plenty of water .medical at~en~ion if irr~ tat~on develops or persists .

Skin Contact: ..,..Wash.'With soap 'Snd water.

Inba.1ation:Remove ~o £resh air. I£ not breathing. give GPR. Xf breathing ~d~f£icult. give oxygen. Get ~ed~te medic~ atten~ion.

Ingest;ion:If ~llo~ed. do NOT ~duce v~ting. Give victim a glass of water ormilk .Call a physician or poison con~ol c~ter immediately. Neverg~ve anything by mou~ ~o an unconscious person.

5 .FIP.E FIGHTmG MEASURES

Plash Po~: 380 ep Lgwer ~los.i.ve L:1Ja.1.t: }lo't avail1\blQ

F~ l'omt )fe'thod: J.S!M D92 Uppo. Exp1oD~ve tdmi~: No~ a~able

Other Flammable Properties :Can burn ~ £ire fo~g carbon d~oxide and some carbon monoxide .

Extinguishing Med:La :Use water spray or £og. £oaro. dry dhemic~ or CO2.

Fire Fighting Procedures :As in any fire. wear self-contained posit~ve-pressure breatbingapparatus .(MSHA!NIOSH approv~d or equivalen~) and fu11 p~otective gear .Containers can build up pressure ~f exposed to heat (fire) .Cool withwa~er spray.

6 .ACCIDENTAL RELEASE MEASURES

Steps- To Be Taken In Case Mater~a1 Is Released Or Spilled :Ven~ilate srea. .AbB~rb Bp~l with ~ert material and place ~ a cbemicalwaste container .Obey relevant local , state and federal laws andregula~~ons. Do not contam~n~~e any lakes, streams .ponds. groundwateror soil. Use personal protective eq~pment as described in S.ection 8.

MSDS Continued on Page 3

22/99 THU 07: 28 FAX 973 ~~4. J~~5 ANDEROL GO ~ 0041

~~~~~~ &~~~~ ~ AA ~V bOOd ~rade O~l

7 .HANDLING AND STORAGE

:B:andl.ing:Wash thoroughly a£ter handliDg. Use ~th adequa~e ventilation. Avoidbreathing vapor or mdst. Avo~d contact with eyes. skin attd clothing .

S'torage:Store in a cool, dry pl~ce. Keep container closed When not in use .

8. ~OSURE CONTROLS/PERSONAL PROTEc:rION

This produc~ does not contain any components considered to be healthhazards under ~e OSEA Baz.ard Communication Standard 29 CFR 1910.1200 orunder the WEMIS Controlled Product Regulations in Canada .

Engineering Conttols :

Use adequate ven~~lat~on.

Respiratory Protection :A respiratory pro~ect~on program that meets OSSA 1910.134 and ANSI Z88,2requiremen~s mua~ be followed Whenever ~orkplace cond~tions warrant at'esp~a~orJs use.

This product con'tains Drl.neral oil whi.<;:h when misted has an OSE:A PEL &1dan ACGIH TLV of 5 mg/m3 and an ACGIH STEL of 10 mg/mG .

Eye Protection :Wear safety g1asses with s~de shields .

Skin Pro'tectiQn:Use ~perroeable gloves to m~~i~; ~e skin con~act

Other Prote~tive EquipMeht:To identi£y additional Personal Protectiv~ Equipment (PPE) requiremen~s.i~ is recommended tha~ a hazard assessment in accordance ~tb the OSBAPPE S~andard (29CFR1910 .132) be conducted before using this produc~ .

9. PHYSICAL AND CJmMICAL PROPERTIES

.

:

.

.

.

Vapo~ PressureVapor Den~ity (Air ~ 1

Specific GrarltyBoiling Poin-tpHViscosit:yEvapor:ation Rate

<0.01 Mal Hg @ 300 FIs he.av.i$r than a.ir0.89>450 FNA1100 SUS @ 100 FIs Blower than Butyl Acetate

MSDS Continued on Page 4

Approval Da~e; MSrcb 26. 1996 Page: 3Print DB:t:e: Februa~ 07. 1997 ..MSDS NlJmber: 0427105 BL-23

22/99 THlT 07:29 rAA UlJ ~~4 3825 ANDEROL CO ~005/

Product Name: PQ@. AA 90 Food Grade O~lApprcv~ Date: Marah 26. 1996 Page: 4Pr:in't: Da'te: Februarv 07. 1997 MSDS Number: 042.7105 BL-23 -;--

9. PHYSICAL AND CHEMICAL PROPERTIES (CONTINUED)

Other Properties;Colorless to light yellow. L~quid. ~ld odor. SolUb~ty in wa~er:

Negligible.

10 .STABILITY AND REAaJ!IVrrY

St:8.bll:l.'t:y~This produc1: .is stable under no~l storage conditions .

»SZsrdous Pol~eriza tion :Will not occur under no~ condi~ions .

Cond~~ions To Avo~d:No't. Applicable.

Incompatib.:il~ty Wj,.th O'ther M.ateri8.ls :Oxidizing ~"te.J:j.a1s .

11. To:x:.ICOLOGICAL PROPERTIES

Othe~ To~colog~ca1 Informa~on :No inforJI1a1:ion available .

12 .ECOLOGICAL mE'ORMATION

Ecolog~cal In£ormation:

No information available

13. DISPOSAL CONSIDERATIONS

Disposal Method:Waste MUSt be d~sposed of in accordance with £edera1. state and localregulations .Incinerat~on is the preferred ~ethod. .

14. TRANSPORTATION Im"ORMATION

u. s. DOT Transport Information

Not regulatedProper Sbipping Natile :

MSDS Continued on page 5

15 .BEGULATORY INFORMATION

0.5. Federal Regula~ons

OSBA:This documen~ has been prepared in accordance ~th the MSDS .reqUir~ents0£ the OSEA Hazard COnwn'D~ c~tion S~sndard .

SARA Sec~~on 311/312:

Haz8.t:d Clsssifj.c:a't:.ions : None.

SARA Secrio11 313 :This product con~ains the following substances subj ect to the reportingrequiremeuts of Section 313 0£ Title III. of the Superfund Amendments andReauthor.izatiou Act" 0£ 1986 and 40 CFR Part 372 :

NoneTSCA;,.

This product or ~ ts componen~s are listed in or exewpt £rom the TSCA, inventory requirements -

This product con~ains the follo~g substanc~s subj ect ~o expor~not~£ication under Sect~on.12(b) 0£ TSCA:

None

State Re~ationsC~i£ornia (Proposi t:ion 65) :

Th:is product coDtajn~ the £o~owing substances known to the S~ate 0£California ~o cause cancer =

NoneThis produc't contains the fo1lo~g substances. known 1:0 'the State ofCali%ornia to cause ad~erse reproduc~ive eff~cts:

None

16 .0TImR INFORMATION.,

EMIS Rat~gS: Bealth -O Flammabili~y -1 React~~ty -aRatings Key: 4 = ~ghest hazard. O -Lowest bazazd. .m Chronic Health Hazard

Key ~o abbre~a~ions used :NA Not applicableNAV No't availableNE No~ establishedNJTSR No .New Jersey Trade Secret Reg~eTXy Number

MSriS Continued on Page 6

Approval Da~e: MarCh 26.1996 Page: 5R;..int Da~e: Fe.brua.a 07. 1997 MSDS Number: 0427105 BL-23 ~

Product Name: PQ@ AA 90 Food Grade OilApproval Date: March 26. 1.996 Page; 6FJ;:1.n'tDate.~ Fe.'b:t"Ua;:y 07. 1997 MSDS Number: 0427105 BL-23 .-

16. O'l'EER INFORMATION (CONTINUED)

Registered Trademark owned by or l~cense.d to ...Anderol Company@

fJ'M T~ad~rk owned by or l~cenB~d to Anderol Company

Revis.ion S1JZDary :This ~ the first issue of ~s MBDS in the ANSI Z400.1-1993 format.

The in£orma~ion contained herein has been compiled £rom data publ~shed inthe l~terature. Specific references- are available on reques~. AnderolCompany exprassly disclaims liability £or any injury or loss from theUSe 0£ this informa~ion or the materials dascribed. The data is balievad tobe reliable, but certain values may vary £ram Source ~o source. This datais not to be coDS~rued as absolu~ely completa. It ~s the responsibility oftha user to determine ~e bast p~acaut~ons necessary for his/herappl~cation. This data only re£ers to the specific mater~al designated andnot ~o any co1llbinat~ons .

MSDS last page

07/22/99 THU 07:29

ANDEROL~

Specialty Lubricants

PRODUCT DA T A

ADVANTAGES

PO AA90 and AA 140 offer;

.DESCRIPTION

SAE 90 &' 140 Grade white oil based

lubricants. .designed to provide highperformance where incidental food contact

may occur .

.~ USDA H1 approval

~ Excellent EP properties

pa Food Grade Gear Oils are. fully approved bythe USDA meeting all the requirements at .theFDA regulation 21 CFR 178.3570.

= Exceptionsl anti-wesr properties

=:> Rust and oxidation inhibited

~ Comparable in performance to many

premium non-food grade gear lubricants

APPROVALS

PO Food Grade Lubricants are approved,recommended, and field tested by manyOEM's in the food processing, baking, bottling,canning. meat processing, end pharmaceuticalindustries.

APPliCA TIONS

SAE 90 "and 140 Gear Oils are for all gearboxes where incidental food ~ontact may

occur I such as:

-Worm Gears-Helical Gears-Herringbone Gears-Bevel Gears-Enclosed Gears

Food, bottling and can closing machinery.Any application in fo.o.d contact area.s requiring

a high viscosity lubricant.

For more infonT1ation: 215 Merry Lane U P.O. Box 518 n E. Hanover, NJ 07936 n 973.864.~630 O Fax 973-884-3825

Thig InformatIon is fumi~hed withou1 warranty, ~EJpresentation. j1"1ducemen1, or IIcen.~e 01 any Kind, except Ihal it is accurate to the bea1 OJ ANDEROI.'s knowledgeor obtalnelJ from sou roes belie\(ed by ANDeRoL 10 be accI,JraIQ. ANDEROL Uoc~ not assume any legal responsibility for use or rellancc upon sam$. Te5tS shouldbe carrIed out only by chemists or chemically qI,Jalllied lab tec1lrllcians. Before USIrlg any cnomical. read its label and Material Safety Oata snQQl.

PO Food Grade -Gear Oils

TEST METHOD.. AA90 AA140

ASTM D 2422SAE J30Q

ASTM D 445ASTM D 445

ASTM D 2161ASTM D 2161ASTM D 2270

ASTM D 97ASTM D 92

ASTM D 1 30

22090

207.117.0

1, '0088

1030

380'a

4601-40'

367.627.81 1960132103

03801a

ASTM D 665 BASTM D 1500

ASTM D 3233 8ASTM D 2782ASTM D 2266

Pass1

3,000600.3

Pass1

3,000500.3

JSO GradeSAEGrade .Viscosity @ 40°C,~cst "

Viscosity @ 100°C, cStViscosity @ 100°F , SUS

Viscosity @ 210°F. BUSViscosity IndexPour Point.o FFlash Point,° F, COC"Copper Corrosion, 3 hrs @ 212°F

( , 00°C)Rust TestColorFilm Strength -Falex (min), IbsTimken OK Load, IbsFour.Ball Wear, 1200 rpm, 1 67°F

(75°C), 40 Kg, , hr, mmSpecific Gravity 60DF (15.6°C) ASTM D 1298 0.89 0.89

"Note -the data contained herein are typical: actual results may vary."

HANDLING & STORAGE. PO Food Grede Lubricants generally present little hazard in normalh8ndling if ordinary care is exercised. If spilledl cover with inertl absorbent material andremove. Flush the area with water .Although PO Food Grade Lubricants are not highly flammablel they will bum and should bekept away from open flames. In case of firer use water spray ~ foam, car.bon dioxide, or drychemical. .

pa Food Grade Lubricants should be stored preferably in protected locations to preventcontamination. Do not re-use drums; ilush and send to reconditioner .MATERIAL SAFETY DATA SHEETS. providing additional information on the properties ofSpecialty Lubricants are available from your local distributor, or from Anderol Company I215 Merry Lane, East Hanover I N.J. 07936. Phone 1-B88.ANDEROL.

~Reglstefed U.S. Trademark of Anderol Co.