MPAP_MU16069_en sifter.pdf
-
Upload
adlan-albi-siregar -
Category
Documents
-
view
223 -
download
0
Transcript of MPAP_MU16069_en sifter.pdf
-
7/25/2019 MPAP_MU16069_en sifter.pdf
1/8
MPAP
Plansifter
-
7/25/2019 MPAP_MU16069_en sifter.pdf
2/8
Application
This plansifter has been designed for the sifting
of granular and floury products as well as for the
sorting of differentproducts in wheat, rye, corn (maize)
and buckwheat mills. In addition, the plansifter is
applied as control sifter in flour storage systems ahead
of bagging and bulk loadout.
Features
Maximum 84m2net sieve area
High sifting capacity; the clearance abovethe sieves is adjusted to suit the product volume
by using different frame heights and
intermediate frames
Sturdy, simple drive
Up to 26 sieves per compartment
Sieve frames of synthetic-resing-coated wood
Excellent sanitation
Easy access for cleaning
Minimized maintenance
Drive with built-in motor
The sturdy drive ensures trouble-free operation of the
plansifter. The adjustability of the centrifugal weights allows
the throw of the sifter to be set to the optimum value
The centrifugal weights are supported by sturdy
self-aligning roller bearings with grease lubrication,
resulting in low maintenance
Range of models
The plansifter is available with 4, 6 or 8 compartments
all of the same height accommodating max. 26 sieves.
Excellent sifting.
End products of top quality.
Plansifter MPAP. Large sifting area
in a minimum space.
2
Dismantling for shipping.After
shipping the three box sections can
quickly and easily be bolted together.
-
7/25/2019 MPAP_MU16069_en sifter.pdf
3/8
Higher sifting capacity.
Minimum space.
3
Plansifter MPAP.
Efficient sifting thanks to dynamic forces.
-
7/25/2019 MPAP_MU16069_en sifter.pdf
4/8
Trouble-free operation.
Less maintenance.
4
Compartments
The inside of the sieve compartments is of simple design.
The continuous door retains the sieve stack in place by
means of robust locks. The product-carrying channels
are easily accessible and can therefore be cleaned with
minimum effort. The sieve frames are easy to install and
remove.
The sieve stack can be easily and securely clamped with
an easy-to-operate clamping device.
-
7/25/2019 MPAP_MU16069_en sifter.pdf
5/8
NOVA sieve.
Type B (wide).
NOVA sieve.
Type N (normal).
NOVA sieves features
Higher sifting capacity in a given space
Combined NOVA cleaners for the sieve cover and
the sieve tray
Wood sieve frames coated with synthetic resin without
corrugated wire mesh
Wear-resistant metal insert frames
Sieve covers glued onto metal insert frames
Direct access to the cleaners without the need for tools
Minimum maintenance for cleaning the sieves
Sieve cleaners
The mult i-arm cleaner constructed of special synthetic
material travels on its center foot across the entire sieve tray.
From here, the cleaner tips to the outer feet and the sieve
is cleaned in all corners. The arms located on the opposite
cleaner side tap against the sieve cover cleaning it.
More sifting area
Efficient sieve cleaning
Consistentsifting capacity
Optimum spaceutilization
5
Sieve generation NOVA.
Outstanding sifting efficiency.
The two sieve frame types N (normal) and B (wide) allow
optimum adjustment of the sifting area to the amount of
stock and to the number of separations.
NOVA sieve with combined NOVA cleaners.
-
7/25/2019 MPAP_MU16069_en sifter.pdf
6/8
6
Examples of sifter schemes
show the stock flows:
awith normal frame type N, horizontally
divided
bwith wide frame type B, twin flow
on primary sieves
c combined with wide frame (B) and
normal frame (N), horizontally divided
Working principle
The stock to be sifted is fed through one
or more inlets via the inlet frame to the sieve
stack. Different sieve frame types allow
up to seven separations. The individual
fractions are directed via channels in
the sieve housing and in the sieve frames to
the outlet frame. This frame directs the
collected stock to the spouts in the bottom
plate. Inspection spouts under the plansifter
allow the stock to be inspected with ease.
Example of sorted stock after
the plansifter:
Coarse break stocks
Fine break stocks
Semolina
Middlings
Flour
Break stocksfrom
the roller mill ahead of
the plansifter.
2
1
3
4
5
-
7/25/2019 MPAP_MU16069_en sifter.pdf
7/8
A B C D E F G H J K L M N O P Q R
2300 3420 1741 2593 3457 3648 2793 1938 808 876 856 430 1900 735 470 280 1000MPAP
min.
MPAP-426 4 26 34.3 42.0 5.5 3700 4450 4800 18.5
MPAP-626 6 26 51.5 63.0 7.5 4700 5500 6000 25.6
MPAP-826 8 26 68.6 84.0 11 5720 6600 7220 32.7
Higher sifting capacity.
Minimum space.
7
min.
Tecnical data
Dimensions in mm
Type
Approx. weights in kg
(including motor)
Volume of
seaworthy
packing
in m3
Type
net gross by sea
Motor
kW
Max. Net sieve area
in m2
Sieve type N Sieve type B
Numberof sieve
compart-ments
Max.Numberof sievesper com-partment
-
7/25/2019 MPAP_MU16069_en sifter.pdf
8/8
Bhler AG
CH-9240 Uzwil, Switzerland
T+41 71 955 11 11
F +41 71 955 66 11
www.buhlergroup.com
MU
160690620092000en