Motors Stirring and agitating technology...16 Nm 60-600 rpm 1.5 Nm 16 Nm PMO3600 with 1:2...

Price list 01/2019

BASIC motor p.3

ATEX motor p.6

Stainless steel motor p.8

IP68 waterproof motor p.9

Ferrite-free motor p.10

Complete stirring system zone 1 eco-Mix p.18

Laboratory agitator eco-Lab p.24

Accessories eco-Traverse and eco-Cap p.20

Agitator my-eco my-eco p.23

Motor accessories p.11

Complete stirring system zone 0/1 eco-Topmix p.19

Intelligent electic grippers p.25

Order assistance p.12

Stirrer drive eco-Drive p.15

Stirring and agitating technologyMotors

Gripping systems

Gripper accessories p.26

Stirrer motor eco p.13

Stirrer drive eco-TopDrive p.16

Stirrer elements eco-Disc / eco-Cup p.17

Lifting station eco-Station 30 p.21

Lifting station eco-Station 200 p.22

PTM mechatronics GmbHGewerbepark 182281 EgenhofenGermany

Phone: +49 8134 - 25797 - 0Fax: +49 8134 - 25797 - 99

Email: [email protected]: www.ptm-mechatronics.com

© PTM mechatronics GmbH01/2019 subject to modificationsOrders are subject to our General terms & conditions under https://ptm-mechatronics.com/en/general-terms-and-conditions/Prices and conditions shall be effective with written approval after order.

Clamping modules PSM S.27

Drive technology

Rotary drives DA, DAD, HPA S.28

Three-finger-grippers DSG S.30

mailto:[email protected]

http://www.ptm-mechatronics.com/

Air motors overview

For the hygienic use even with aggressive substances, food-safe, IP68

waterproof, clean room classified.

For the easy installation in ordinary production environments

For the use in sensitive environments with magnetic fields like MRI medical

technology.

For the functionally secure use in explosion-endangered areas.

For the use in wet or dusty environments, even permanently

underwater.

Bas

ic m

oto

r

Basic motor Nm Basic price

PMO450 BA 4 520,00€

PMO900 BA 8 575,00€

PMO1800 BA 16 620,00€

PMO3600 BA 32 1.050,00€

Tran

s-

mis

sio

n

Transmission PMO450 BA / PMO900 BA PMO1800 BA / PMO3600 BA

G[1 to 3] [1] 3:1 559,00€ [1] 3:1 595,00€

[2] 9:1 895,00€ [2] 9:1 964,00€

[3] 1:2 559,00€ [3] 1:2 595,00€

Dri

ve s

haf

t

Drive shaft PMO450 BA / PMO900 BA

Standard: shaft Ø 14mm flat with inner thread M4

PMO1800 BA / PMO3600 BA


A[1 to 6] [1] Shaft Ø 19mm smooth 29,00€ [1] Shaft Ø 24mm smooth 34,00€

[2] Shaft Ø 24mm smooth 29,00€ [2] Shaft Ø 32mm smooth 34,00€

[3] Shaft Ø 14mm with groove and tongue 14,00€ [3] Shaft Ø 19mm with groove and tongue 18,00€



[6] Nonstandard shaft up to Ø 30mm

With bearing flange up to Ø 28mm165,00€

[6] Nonstandard shaft up to max. Ø 35


Op

tio

ns

mu

ltip

le s

ele

ctio

n

Options PMO450 BA / PMO900 BA PMO1800 BA / PMO3600 BA

Mounting B[1 to 3] [1] Mounting flange 24,00€ 29,00€ [2] Mounting angle 184,00€ 194,00€[3] Bearing flange 149,00€ 199,00€

ATEX [Ex] [Ex] ATEX-certificate and grounding Ex II 2 G/D c T5 100°C

100,00€ 100,00€

Speed sensor [S] [S] Mounted sensor 185,00€ 195,00€

IP6

8

IP68 PMO450 BA / PMO900 BA

stainless-steel shaft V4A and IP68

PMO1800 BA / PMO3600 BA

stainless-steel shaft V4A and IP68

IP stainless-steel shaft and IP68 250,00€ stainless-steel shaft and IP68 300,00€

BASIC motor (BA) - section 1

• Anodised aluminium housing• IP67 waterproof • Various sealing concepts

available• Version drive shaft selectable• Reversible (left/right)

Seal

ing

Sealing for PMO450 BAStandard sealing: NBR

without transmission with transmission

D[1 to 6] Silicone-free [1]24,00€ [4]24,00€

Viton FPM/FKM (Silicone-free) [2]54,00€ [5]84,00€

Acetone-resistant EPDM PTFE (Silicone-free) [3]109,00€ [6]154,00€

Sealing for PMO 900 BAStandard sealing: NBR















Transmission

Drive shaft Mounting

ATEX

Sensor

Sealing

Example: PMOXXXX BA G[1-3] A[1-6] B[1-3]IP Ex S D[1-6]

IP68

BASIC motor (BA) - section 2

Mounting flange B[1] Mounting angle B[2] Bearing flange B[3]

Overview performance data and basic price

Torque Speed Min. torque Max. torque Motor size Basic price2 Nm 60-600 rpm 1 Nm 2 Nm PMO450 with 1:2transmission €1.069.06

4 Nm 30-300 rpm 2 Nm 4 Nm PMO450 without transmission €520

4 Nm 60-600 rpm 1.5 Nm 4 Nm PMO900 with 1:2 transmission €1 124.06


8 Nm 60-600 rpm 1 Nm 8 Nm PMO1800 with 1:2 transmission €1 208.64



16 Nm 60-600 rpm 1.5 Nm 16 Nm PMO3600 with 1:2 transmission €1 638.64


32 Nm 30-300 rpm 3 Nm 32 Nm PMO3600 without transmission €1 050

36 Nm 3.3-33 rpm 18 Nm 36 Nm PMO450 with 9:1 transmission €1 401.48






Bas

ic m

oto

r


PMO450 ATEX 4 610,00€

PMO900 ATEX 8 665,00€

PMO1800 ATEX 16 720,00€

PMO3600 ATEX 32 1.150,00€

Tran

smis

sio

n

Transmission PMO450 ATEX / PMO900 ATEX PMO1800 ATEX / PMO3600 ATEX

G[1 to 3] [1] 3:1 559,00€ [1] 3:1 595,00€

[2] 9:1 895,00€ [2] 9:1 964,00€

[3] 1:2 559,00€ [3] 1:2 595,00€

Dri

ve s

haf

t

Drive shaft PMO450 ATEX / PMO900 ATEX


PMO1800 ATEX / PMO3600 ATEX


A[1 to 6] [1] Shaft Ø 19mm smooth 29,00€ [1] Shaft Ø 24mm smooth 34,00€ [2] Shaft Ø 24mm smooth 29,00€ [2] Shaft Ø 32mm smooth 34,00€[3] Shaft Ø 14mm with groove and tongue 14,00€ [3] Shaft Ø 19mm with groove and tongue 18,00€[4] Shaft Ø 19mm with groove and tongue 29,00€ [4] Shaft Ø 24mm with groove and tongue 34,00€[5] Shaft Ø 24mm with groove and tongue 29,00€ [5] Shaft Ø 32mm with groove and tongue 34,00€[6] Nonstandard shaft up to Ø 30mm




Op

tio

ns

mu

ltip

le s

ele

ctio

n

Options PMO450 ATEX / PMO900 ATEX PMO1800 ATEX / PMO3600 ATEX

Mounting B[1 to 3] [1] Mounting flange 24,00€ 29,00€

[2] Mounting angle 184,00€ 194,00€

[3] Bearing flange 149,00€ 199,00€

Speed sensor [S] [S] Sensor, mounting incl. 185,00€ 195,00€

IP6

8

IP68 PMO450 ATEX / PMO900 ATEX

Stainless-steel shaft and IP68

PMO1800 ATEX / PMO3600 ATEX


IP Stainless-steel shaft and IP68 250,00€ Stainless-steel shaft and IP68 300,00€

ATEX motor (ATEX) – section 1 ATEX certified Ex II 2 G/D c T5 100°C

• Anodised aluminium housing withgrounding

• IP67 waterproof• Oil-free• Version drive shaft selectable• Reversible (left/right)

Seal

ing

Sealing for PMO450 ATEXStandard sealing: NBR




















ATEX certified Ex II 2 G/D c T5 100°CATEX motor (ATEX) – section 2

Mounting flange B[1] Mounting angle B[2] Bearing flange B[3]

Drive shaft

Transmission Sensor

SealingMounting

Example: PMOXXXX ATEX G[1-3] A[1-6] IP B[1-3] S D[1-6]

IP68

Bas

ic m

oto

r


PMO450 VA 4 1.295€

PMO900 VA 8 1.495€

PMO1800 VA 16 1.895€

PMO3600 VA 32 2.295€

Tran

smis

sio

n Transmission PMO450 VA / PMO900 VA PMO1800 VA / PMO3600 VA

G[1 to 3] [1] 3:1 1.148,00€ [1] 3:1 1.248,00€

[2] 9:1 1.848,00€ [2] 9:1 1.984,00€

[3] 1:2 1.148,00€ [3] 1:2 1.248,00€

Dri

ve s

haf

t

Drive shaft PMO450 VA / PMO900 VA


PMO1800 VA / PMO3600 VA











Stainless steel motor (food-safe, acid resistant)O

pti

on

s m

ult

iple

se

lect

ion

Options PMO450 VA / PMO900 VA PMO1800 VA / PMO3600 VA


[2] Mounting angle 224,00€ 234,00€

[3] Bearing flange 249,00€ 299,00€

ATEX [Ex] [Ex] ATEX certificate and groundingEx II 2 G/D c T5 100°C

100,00€ 100,00€


Clean Room [CR] [CR] DIN ISO 14644-1 200,00€ 200,00€

• Housing stainless steel electropolished• Drive shaft and screws made of stainless steel• Version drive shafts selectable• Sealing made of EPDM• IP68 waterproof • Reversible (left/right)• Optional: ATEX certified Ex II 2 G/D c T5 100°C• Optional: Classified according to DIN 14644 for clean

room class ISO 1

PMOXXXX VA G[1-3] A[1-6] B[1-3] [Ex]

Drive shaft

Transmission Mounting

Example:

ATEX

[S]

Speed sensor

[CR]

Clean Room

Bas

ic m

oto

r


PMO450 IP68 4 722€

PMO900 IP68 8 770€

PMO1800 IP68 16 810€

PMO3600 IP68 32 1.270€

Dri

ve s

haf

t

Drive shaft PMO450 IP68 / PMO900 IP68


PMO 1800IP68 / PMO3600 IP68



[2] Shaft Ø 24mm smooth 39,00€ [2] Shaft Ø 32mm smooth 44,00€[3] Shaft Ø 14mm with groove and tongue 24,00€ [3] Shaft Ø 19mm with groove and tongue 28,00€


[5] Shaft Ø 24mm with groove and tongue 39,00€ [5] Shaft Ø 32mm with groove and tongue 44,00€[6] Nonstandard shaft up to Ø 30mm




Op

tio

ns

mu

ltip

le s

ele

ctio

n

Options PMO450 IP68 / PMO900 IP68 PMO1800 IP68 / PMO3600 IP68


[2] Mounting angle 194,00€ 204,00€

[3] Bearing flange 169,00€ 219,00€

ATEX [Ex] [Ex] ATEX-certificate and groundingEx II 2 G/D c T5 100°C

100,00€ 100,00€


Tran

smis

sio

n

Transmission PMO450 IP68 / PMO900 IP68 PMO1800 IP68 / PMO3600 IP68

G[1 to 3] [1] 3:1 579,00€ [1] 3:1 615,00€

[2] 9:1 915,00€ [2] 9:1 984,00€

[3] 1:2 579,00€ [3] 1:2 615,00€

PMOXXXX IP68 G[1-3] A[1-6] B[1-3] [Ex]

Drive shaft

Transmission Mounting

ATEX

[S]

Sensor

Example:

IP68 waterproof motor (IP68)

• Anodised aluminium housing• IP68 waterproof and seawater-resistant• Version drive shaft selectable• Drive shaft and screws of stainless steel• Reversible (left/right)

Ferrite-free motor (FF)B

asic

mo

tor


PMO450 FF 4 3.738,00€

PMO900 FF 8 5.168,00€

PMO1800 FF 16 On request

PMO3600 FF 32 On request

Dri

ve s

haf

t

Drive shaft PMO450 FF / PMO900 FF


PMO1800 FF / PMO3600 FF











Op

tio

ns

Options PMO 450 FF / PMO 900 FF PMO 1800 FF / PMO 3600 FF


[2] Mounting angle 224,00€ 234,00€

[3] Bearing flange 249,00€ 299,00€

Tran

smis

s

ion

Transmission PMO450 FF / PMO900 FF PMO1800 FF / PMO3600 FF

G[1 to 3] [1] 3:1 3.054,00€ [1] 3:1 On request

[3] 1:2 3.054,00€ [3] 1:2 On request

• Anodised aluminium housing• IP67 waterproof • Version drive shaft selectable• Transmission shaft made of brass• Reversible (left/right)

PMO XXXX FF G[1-3] A[1-6] B[1-3]

Transmission

Drive shaft

Mounting

Example:

Co

nn

ect

or

blo

ck

Connector block(air connection, needle valve, high-performance silencer,overpressure valve, orifice)

PMO450 / PMO900 PMO1800 / PMO3600

AB[1/2] [1] Aluminium

[2] Stainless steel

[3] 90° reversibel aluminium

[4] 90° reversibel stainless steel

86,00€

138,00€

105,00€

165,00€

96,00€

158,00€

125,00€

189,00€

Motor accessories

Motor – maintenance

Co

nn

ect

ion

Connection PMO450 / PMO900 PMO1800 / PMO3600

AN[1 to 5] [1] 45° version 58,00€ 68,00€

[2] 45° version made of stainless steel 165,00€ 185,00€

[3] 90° version 58,00€ 68,00€

[4] 90° version made of stainless steel 165,00€ 185,00€

[5] orifice 5,00€ 8,00€

PMO XXXX XX XX X XX

AB[1-2]

AN[1-5]

Serv

ice

Service kit (incl. pistons and grease) Basic price

KI[1 to 4] [1] PMO 450 119,00€

[2] PMO 900 238,00€

[3] PMO 1800 161,00€

[4] PMO 3600 322,00€

Example:

KI[1-4]

PMO XXXX ATEX+

Order assistance – old order numbers

PMO XXXX FF

PMO XXXX BA

PMO XXXX IP68 PMO XXXX VA

+

[Ex] ATEX certificate and grounding

[S] Sensor

PMOXXXX BA G[1-3] A[1-6] B[1-3]IP Ex S D[1-6]New (example):

Transmission

Sensor

IP68


SealingsATEX

Old:

B[1] Mounting flangeB[2] Mounting angle

B[3] Bearing flange

IP IP68 waterproof

New options:

Bas

ic m

oto

r


eco 450 (PMO450 EX) 4 709€

eco 900 (PMO900 EX) 8 774€

eco 1800 (PMO1800 EX) 16 839€

eco 3600 (PMO3600 EX) 32 1.284€

Tran

smis

sio

n

Transmission eco 450 / eco 900 eco 1800 / eco 3600

G[1 to 3] [1] 3:1 599,00€ [1] 3:1 638,00€

[2] 9:1 935,00€ [2] 9:1 995,00€

[3] 1:2 599,00€ [3] 1:2 638,00€

Dri

ve s

haf

t

Drive shaft eco 450 / eco 900

Standard: shaft Ø 14 flat with inner thread M4

eco 1800 / eco 3600

Standard: shaft Ø 19 flat with inner thread M6

A[1 to 6] [1] Shaft Ø 19 smooth 29,00€ [1] Shaft Ø 24 smooth 34,00€ [2] Shaft Ø 24 smooth 29,00€ [2] Shaft Ø 32 smooth 34,00€[3] Shaft Ø 14 with groove and tongue 14,00€ [3] Shaft Ø 19 with groove and tongue 18,00€[4] Shaft Ø 19 with groove and tongue 29,00€ [4] Shaft Ø 24 with groove and tongue 34,00€[5] Shaft Ø 24 with groove and tongue 29,00€ [5] Shaft Ø 32 with groove and tongue 34,00€

[6] Nonstandard shaft up to max. Ø 30 165,00€ [6] Nonstandard shaft up to max. Ø 35 175,00€

ATEX stirrer motor eco ATEX certificate Ex II 2 G/D c T5 100°CIP

68

Op

tio

n

IP68 eco 450 / eco 900


eco 1800 / eco 3600


IP Stainless-steel shaft and IP68 250,00€ Stainless-steel shaft and IP68 300,00€

• Aluminium housing anodised with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealing made of PTFE• With connector block:

• Air connection• Needle valve for speed setting• High-performance silencers• Overpressure valve for overload protection

• Counterclockwise rotation

Example: eco XXXX G[1-3] A[1-6] IP B[1-3] S R

Mounting flange B[1] Bearing flange B[3] Mounting angle B[2]

ATEX-Zulassung Ex II 2 G/D c T5 100°C

Transmission

Clockwise rotation

IP68


Sensor

ATEX Motor ecoO

pti

on

en

un

d Z

ub

eh

ör

(Me

hrf

ach

ausw

ahl m

ögl

ich

)

Optionen und Zubehör eco 450 / eco 900 eco 1800 / eco 3600


[2] Mounting angle 184,00€ 194,00€

[3] Bearing flange 149,00€ 199,00€

Speed sensor S Sensor incl. mounting 185,00€ 195,00€

Clockwise rotation R Change in clockwise rotation 50,00€ 50,00€

Stainless-steel design E Stirrer motor made of stainless steel on request on request

E

Stainless steel

Speed sensor S

Stirrer drive zone 1 eco-Drivee

co-D

rive

Stirrer drive Nm Basic price

eco-Drive 450 (PMO 450 EX A7 B3 D3) 4 €918,00

eco-Drive 900 (PMO 900 EX A7 B3 D3) 8 €1.038,00



Tran

smis

sio

n

Transmission eco-Drive 450 / eco-Drive 900 eco-Drive 1800 / eco-Drive 3600

G[1 to 3] [1] 3:1 599,00€ [1] 3:1 638,00€

[2] 9:1 935,00€ [2] 9:1 995,00€

[3] 1:2 599,00€ [3] 1:2 638,00€

ATEX certification Ex II 2 G/D c T5 100°C

Example: eco-Drive XXXX G[1-3] S R

Transmission Clockwise rotation

Sensor

Op

tio

ns

Options eco-Drive 450 / eco-Drive 900 eco-Drive 1800 / eco-Drive 3600



Stainless-steel design E Stirrer drive in stainless steel On request On request

E

Stainless steel



• Counterclockwise rotation• Agitator hub stainless steel

Stirrer drive zone 0/1 eco-TopDriveTr

ansm

issi

on

Getriebe eco-TopDrive 450 / eco-TopDrive 900 eco-TopDrive 1800 / eco-TopDrive 3600

G[1 to 3] [1] 3:1 599,00€ [1] 3:1 638,00€

[2] 9:1 935,00€ [2] 9:1 995,00€

[3] 1:2 599,00€ [3] 1:2 638,00€

eco

-To

pD

rive

Stirrer drive Nm Basic price

eco-TopDrive 450 (ECO 450) 4 1.692,00€

eco-TopDrive 900 (ECO 900) 8 1.756,00€

eco-TopDrive 1800 (ECO 1800) 16 1.978,00€

eco-TopDrive 3600 (ECO 3600) 32 2.365,00€

Ex II 1/2 G Ex h IIC T6 Ga/Gb XEx II 1/2 D Ex h IIIC T85°C Da/Db X

Op

tio

ns

Options eco-TopDrive 450 / eco-TopDrive 900 eco-TopDrive 1800 / eco-TopDrive 3600



Stainless-steel design E Stirrer drive in stainless steel On request On request



• Counterclockwise rotation• Agitator hub stainless steel

Example: eco-TopDrive XXXX G[1-3] S R

Transmission Clockwise rotation

Sensor

E

Stainless steel

Stir

rer

ele

me

nt

Stirrer element Diameter in mm Price

eco-CupEC[1 to 6]

[1] sliding hub 16mm diameter 150 €152,00





[6] sliding hub 25mm diameter foldable 500 €467,00

Accessory stirrer elements eco-Cup & eco-DiscSt

irre

re

lem

en

t

Stirrer element Diameter in mm Price

eco-DiscED[1 to 6]






[6] sliding hub 25mm diameter foldable 500 €492,00

Complete stirring system zone 1 eco-Mix

eco-Mix 30 Price

for 30 litre hobbock, torque 4 Nm

Agitator shaft l=346mm d=16mm

eco-Cup D=170 mm sliding hub

Breakthrought hobbock 20mm

Hole circle D67mm 4xd5,5mm or 4xM5

1.289,00€

eco-Mix 60 Price



eco-Cup d=210mm sliding hub



1.389,00€

eco-Mix 100 Price

for 100 litre barrel, torque 8 Nm

Agitator shaft l =726 mm d=20mm


Breakthrought barrel 24 mm


1.589,00€

eco-Mix 200 Price




Breakthrought barrel 24mm


1.789,00€

eco-Mix 1000 Price

for 1 000 litre IBC, torque 32 Nm

Agitator shaft I=780mm d=25mm

eco-Cup d=500mm sliding hub foldable

Breakthrought IBC 30mm


2.289,00€

eco-Mix 600 Price

for 600 litre IBC, torque 32 Nm


eco-Cup d=500mm sliding hub foldable



2.189,00€

ATEX certificate Ex II 2 G/D c T5 100°C

Traverse optional p. 22

Example: eco-Mix XXXX S R E

Clockwise rotation

Sensor

W

Stainless steel

Change stirrer element

Options Price

Speed sensor [S] 170,00€

Clockwise rotation [R] 50,00€

Stainless steel version [E] On request

Change to eco-Disc stirrer element [W] 40,00€

Cutting of agitator shaft [V] 50,00€

• Anodised aluminium housing• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:


• Counterclockwise rotation• With agitator shaft and stirrer element eco-Cup

V

Cutting shaft

eco-Topmix 30 Price



eco-Cup 170 mm sliding hub


Hole circle D85mm 4xd6,5mm

1.989,00€

eco-Topmix 60 Price






2.089,00€

eco-Topmix 100 Price


Agitator shaft l =726 mm d=20mm

eco-Cup d=260mm Sliding hub



2.289,00€




eco-Cup d=320mm Sliding hub



2.489,00€


for 1 000 litre IBC, torque 32 Nm


eco-Cup d=500mm Sliding hub foldable



3.189,00€


for 600 litre IBC, torque 32 Nm


eco-Cup d=500mm Sliding hub foldable



2.989,00€

Complete stirring system zones 0/1 eco-Topmix Ex II 1/2 G Ex h IIC T6 Ga/Gb XEx II 1/2 D Ex h IIIC T85°C Da/Db X

• Anodised aluminium housing• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:


• Counterclockwise rotation• With agitator shaft and stirrer element eco-Cup

Options Price

Speed sensor [S] 170,00€

Clockwise rotation [R] 50,00€

Stainless steel version [E] On request

Change to eco-Disc stirrer element [W] 40,00€

Cutting of agitator shaft [V] 50,00€Example: eco-Mix XXXX S R E

Clockwise rotation

Sensor

W

Stainless steel

Change stirrer element

V

Cutting shaft

Accessories eco-Traverse and eco-CapA

cce

sso

rie

s

Accessories eco-Series

Traverse TR[1 to 3]

[1] Traverse for 30-100 litre hobbock eco-Traverse 500 298,00

[2] Traverse for 200 litre barrel eco-Traverse 600 334,00

[3] Traverse for 600-1000 litre IBC eco-Traverse IBC 348,00

Cover DE[1 to 3]

[1] Cover for 10-20 litre container eco-Cap 10 430,00

[2] Cover with hatch for 30 litre container eco-Cap 30 550,00

[3] Cover with hatch for 100-200 litre container eco-Cap 200 750,00

DE[1] TR[1] DE[2] TR[2] DE[3] TR[3]

Lifting station eco-Station 30with agitator eco-Mix 30

Control panel

optional

Description netto/€

Lifting station eco-Station 30 1 996.50€

for 30 litre hobbock, cover stainless steel 380mm, lift control, automatic agitator switch-off and main air controller.

Technical data:DxWxH: 600 mm x 440 mm x 1335 mmATEX certificate zone 1: Ex II 2G c IIB T6Lifting force max. (without cover): 50 kgLifting height max.: 500 mmLifting speed max.: 100 mm/sIngoing air pressure max.: 0,6 MPa (6 bar)Colour: light greyWithout container

Agitator eco-Mix 30 1 289.00€

Complete stirring system for 30 litre hobbock comprising: Motor eco-Drive 450Agitator shaft: 346mm with 16mm diameterLength: 359mmStirrer element: eco-Cup 170mm sliding hub 16mmNeedle valve for speed setting

Air connection: 6mm pneumatic hose

Technical data: (30-300rpm)ATEX certificate zone 1: Ex II 2 G/D c T5 100°CAluminium housing anodisedOil- and silicone-freeAcetone-resistant sealing made of PTFEIP67 waterproofProtection against overload

amount 3 285.50€

Optional:

Control panel for lifting station Surcharge 384.00€incl. on-/off-switch

Zone separation flange for Atex zone 0/1 Surcharge 720.00€Ex II 1/2 G Ex h IIC T6 Ga/Gb X / Ex II 1/2 D Ex h IIIC T85°C Da/Db X

Lifting station eco-Station 200with agitator eco-Mix 200

Control panel

optional

Description netto/€

Lifting station eco-Station 200 2 385.00€

for 200 litre barrel, cover stainless steel 630mm, lift control, automatic agitator switch-off and main air controller.

Technical data:DxWxH: 800 mm x 700 mm x 2344 mmATEX certificate zone 1: Ex II 2G c IIB T6Lifting force max. (without cover): 80 kgLifting height max.: 1 000 mmLifting speed max.: 100 mm/sIngoing air pressure max.: 0,6 MPa (6 bar)Colour: light greyWithout container

Agitator eco-Mix 200 1 789.00€

Complete stirring system for 200 litre barrel comprising: Motor eco-Drive 1800Agitator shaft: 746mm with 20mm diameterLength: 777mmStirrer element: eco-Cup 320mm sliding hub 20mmNeedle valve for speed setting

Air connection: 8mm pneumatic hose

Technical data: (30-300rpm)ATEX certificate zone 1: Ex II 2 G/D c T5 100°CAluminium housing anodisedOil- and silicone-freeAcetone-resistant sealing made of PTFEIP67 waterproofProtection against overload

amount 4.174,00€

Optional:

Control panel for lifting station Surcharge 384.00€incl. on-/off-switch

Zone separation flange for Atex zone 0/1 Surcharge 720.00€Ex II 1/2 G Ex h IIC T6 Ga/Gb X / Ex II 1/2 D Ex h IIIC T85°C Da/Db X

Agitator my-ecoSt

ep

1

Mo

tor

wit

hfl

ange

solu

tio

n

Zone separation

flange

Zone separation

0/1

Nm Price

eco-TopDrive 450 4 1.692,00€

eco-TopDrive 900 8 1.756,00€

eco-TopDrive 1800 16 1.978,00€

eco-TopDrive 3600 32 2.365,00€

Ex II 1/2 G Ex h IIC T6 Ga/Gb XEx II 1/2 D Ex h IIIC T85°C Da/Db X

Bearing

flange

Zone 1 Nm Price

eco-Drive 450 4 918,00€

eco-Drive 900 8 1.038,00€

eco-Drive 1800 16 1.088,00€

eco-Drive 3600 32 1.534,00€


Ste

p2

Dri

ve s

haf

t

Drive shaft eco-Drive/TopDrive 450/900

diameter 16mmPrice eco-Drive/TopDrive 1800/3600

diameter 20mmPrice

AW[1-2] [1] 0-300 mm 200,00€ 0-300 mm 250,00€

[2] 301-600 mm 300,00€ 301-600 mm 350,00€

[2] 601-1 000 mm 400,00€ 601-1 000 mm 450,00€

Ste

p3

Stir

rer

ele

me

nt

Price

eco-Cup EC[1-6]eco-Disc ED[1-6] See page 17 152,00€-

492,00€

Op

tio

ne

n

Code Bezeichnung Preis

KM Stainless steel nut with PTFE sealing –

pressure-tight (only zone 0/1)

€250

Agi

tato

r Agitator Price

eco-Lab 450 749,00€

eco-Lab 900 809,00€

Laboratory agitator eco-LabTr

ansm

issi

on

Transmission eco-Lab 450 / eco-Lab 900 Price

G[1 to 3] [1] 3:1 559,00€

[2] 9:1 895,00€

[3] 1:2 559,00€


eco-Lab XXXX G[1-3] STExample:

Acc

ess

ori

es

Accessories eco-Lab 450 / eco-Lab 900 Price

Laboratory stand [ST] Laboratory stand 160,00€

EX propeller [ER] EX propeller 240,00€

EX feedthrough ED[1 to 2] [1] EX feedthrough NS29/32 for agitator shaft Ø 8mm 75,00€

[2] EX feedthrough NS29/32 for agitator shaft Ø 10mm 75,00€

ED[1-2]ER

Transmission

Laboratory stand

Propeller

Feedthrough

• Anodised aluminium housing with grounding• Protection class IP67 waterproof• Oil- and silicone-free• Acetone-resistant sealings made of PTFE• With connector block:


• Counterclockwise rotation• quick-action chuck for agitator shaft Ø 0-13mm• mounting bar Ø 12mm

• Interface RS232 or RS485• SG 30:

• 12 volts• 30mm gripping stroke• 30N closing force

• SG 50:• 24 volts• 50mm gripping stroke• 50N closing force

• SG 150:• 24 volts• 100mm gripping stroke• 50N closing force

Intelligent electric grippers

Example:

Ste

p1

Gri

pp

er

Basic gripper Price

SG 30 2.830,00€

SG 50 2.930,00€

SG 150 3.460,00€

Ste

p3

Pic

k &

Pla

ce

Pick & Place function Price

P SG030 Pick & Place (15N) 170,00€

SG050 Pick & Place (25N) 170,00€

SG150 Pick & Place (25N) 170,00€

Ste

p4

IP6

8

IP68 waterproof Price

W IP68 waterproof 300,00€

Ste

p6

Cle

an r

oo

m

Clean room ISO 14644 Price

C [1 to 3] [1] Clean room class ISO 6 250,00€

[2] Clean room class ISO 5 300,00€

[3] Clean room class ISO 1 400,00€

Ste

p5

Safe

tygr

ip

Safetygrip – magnetic brake for SG50/SG150 Price

S [1/2] [1] SG with mounting from above 320,00€

[2] SG with mounting from behind 370,00€

Ste

p2

Inte

rfac

e

Interface

R [1/2] [1] RS 232

[2] RS 485

SG XXX R[1-2] P W

Ste

p4

IP6

8

H²O² sterilizable Price

H IP68 waterproof and H²O² resistant 400,00€

Accessories for electric grippers

Coupling adapter KA

Coupling plate KP

Coupling disc KS[1-5]

Acc

ess

ori

es

Accessories SG30/SG50/SG150

Connector cable ALB [1-4]

[1] 3 metres - socket – straight 35,00€

[2] 3 metres – socket – bent 35,00€

[3] 5 metres – socket – straight 39,00€

[4] 5 metres – socket – bent 39,00€

Connector cable BLS [1-6]

[1] 3 metres – plug – straight 35,00€

[2] 3 metres – plug – bent 35,00€





Coupling plate KP [KP] Coupling plate 125,00€

Coupling adapter KA [KA] Coupling adapter 159,00€

Coupling discKS [1-5]

[1] Coupling disc – standard 78,00€

[2] Coupling disc - D25M4 98,00€

[3] Coupling disc - D31,5M5 98,00€

[4] Coupling disc – D40M6 98,00€

[5] Coupling disc – D50M6 98,00€

SG50/SG150

Gripper jawsGB[1 to 3]

[1] Microplate – straight 390,00€

[2] Microplate – curved 390,00€

[3] Microplate - cropped 390,00€

Basic jaw setGS

Base jaw set 355,00€

Clamping module PSM Price

PSM 0030-030 822,00 €PSM 0050-029 808,00 €PSM 0200-013 872,00 €Surcharge end position control 98,00 €

Clamping modules PSM

Rotary drives DA

Rotary drives DA Price

DA 0200-185 426,00 €DAD 0500-185 1392,00 €Surcharge end position control 108,00 €Surcharge groove and tongue 65,00 €

Hydropneumatic drives HPA

Hydropneumatic drives HPA Price

HPA 0750-185 1.752,00 €Surcharge for end position control 148,00 €Surcharge for hollow shaft 250,00 €

Three finger gripper DSGSt

ep

1D

SG

Three finger gripper DSG Basic price

DSG 450 1.125,00 €

DSG 900 1.185,00 €

DSG 1800 1.265,00 €

DSG 3600 1.725,00 €

Ste

p2

Tran

smis

sio

n

Transmission DSG 450 / DSG 900 DSG 1800 / DSG 3600

G[1 to 3] [1] 3:1 599,00€ [1] 3:1 638,00€

[2] 9:1 935,00€ [2] 9:1 995,00€

[3] 1:2 599,00€ [3] 1:2 638,00€

• Aluminium housing anodised• IP66 waterproof

Ste

p3

Op

tio

ns

Options DSG 450 / DSG 900 DSG 1800 / DSG 3600

Gripping fingersOn request On request

Motors Stirring and agitating technology...16 Nm 60-600 rpm 1.5 Nm 16 Nm PMO3600 with 1:2...

Documents

Transcript of Motors Stirring and agitating technology...16 Nm 60-600 rpm 1.5 Nm 16 Nm PMO3600 with 1:2...