Xxxx Xxxxxx

MOTORCYCLE & MIRROR MOUNT Help Desk Guide

RIDE DRIVE LIFERUN

Anatomy of motorcycle dashboard

Hi/low beamheadlight switch

Turn signalswitch

Clutchlever Horn button

Triple clamp

Speedometer

Tachometer

Handlebar riser

Kill switch

Hazard light switch

Throttle

Front brake leverStarter switch

The image on the left shows the approximate location and name of the various parts of a motorcycle dashboard.

Every motorcycle (or scooter) will have a different layout but this is a rough guide to where things will likely be.

Anatomy of the Motorcycle Mount

Countersunk screw

Top cap

Locking lever

Locking lever spring

Mount index base

Cap head screw

Motorcycle mount index base - male

Motorcycle mount clamp Spacer - 28mm

Spacer - 25mm

Spacer - 22mm

Motorcycle mount arm

Anatomy of the Mirror Mount

Countersunk screw

Mount cap

Locking lever

Locking lever spring

Mount index base - female

Cap head screw

Mirror Mount index base - screw

Mirror Mount clamp Spacer - 14mm

Spacer - 12mm

Spacer - 10mm

Identifying the type of bike

Sport BikesPopular models: Kawasaki Ninja / Suzuki Hayabusa / Ducati / Yamaha YZF

Sport bikes have a very busy and condensed handle bar setup.

The moto-mount is recommend but is unlikely to fit most Sport Bike setups.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

25mm

60mm

Naked BikesPopular models: Triumph / Yamaha MT / Suzuki SV / KTM Duke

(also known as Standards or Roasters)

Naked bikes have a very varied handlebar setup across different models and brands

The moto-mount or mirror mount is recommended depending on space constraints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment Requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Naked bikes have a very varied handlebar setup across different models and brands

The moto-mount or mirror mount is recommended depending on space constraints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment Requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Touring Bikes

Popular models: BMW K 1600 / Honda Gold Wing / Indian Roadmaster

Touring bikes have a very varied handlebar setup across different models and brands

The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space con-straints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Touring bikes have a very varied handlebar setup across different models and brands

The moto-mount or mirror mount (The mirror mount can even fit on some cross bars) is recommended depending on space con-straints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Cruiser/ChopperPopular models: Harley Davidson / Triumph Rocket / Kawasaki VN2000

Most Cruiser and Chopper bikes have lot’s of space on the handle bars and usually have round bar mirrors

The moto-mount or mirror mount is recommended depending on space constraints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Off Road/Trail/Dual Sport/EnduroPopular models: KTM 690 / HONDA XR / HUSQVARNA

Most Off road/Trail/Dual Sport/Enduro bikes have cross bars and usually have round bar mirrors

The moto-mount or mirror mount is recommended depending on space constraints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

ScootersPopular models: Vespa / Piaggio / Yamaha Mio

(Also known as Mopeds and Underbones)

Scooter usually have solid and no bar to secure a mount to.

The Mirror Mount is recommended for scooter mirrors provided the mirror bars are round.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Tricycles/QuadsPopular models: Kawasaki / Harley / Yamaha

(Also known as Trikes, 3 Wheelers/4-Wheelers)

Tricycle and Quad Bikes can come in various styles such as cruis-er/offroad/scooter/chopper/sport therefore having varying bar and mirror set ups.

The moto-mount or mirror mount is recommended depending on space constraints and personal preference.

Motorcycle Mount fitment requirements:25mm length bar space is recommend

60mm clearance required for to screw clamp together.

Mirror Mount fitment requirements:Round mirror bar (10-16mm diameter)

Check size of phone indented for mounting does not obstruct use of motorcycle or block vision

Naked/Standard/Roadster

Off Road/Trail/Dual Sport/Enduro

Cruiser/Chopper

Scooter/Moped/Underbones

Touring Bikes

Tricycle/Quad/3 Wheeler/4 Wheeler

Sports Bikes

There are a huge range of motorcycles and scooters but they can generally be gathered into one of the categories shown on this page.

Our recommended mount for each of these categories can be found on the following pages. However, because of the variety of bikes our suggestion might not be compatible with all bikes. For example, not all Tricycle/Quads have rear view mirrors.

Naked/Standard/Roadster

Naked/Standard/Roadster bikes have a very varied handlebar setup across different models and brands.

This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

60m

m

25m

m

Mirror Mount Motorcycle Mount(shown with and without

mounting arm)

Off Road/Trail/Dual Sport/Enduro

Most of this kind of bike have cross bars and usually have round mirror stems.

This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

Mirror Mount

60m

m

25m

m

Motorcycle Mount(shown with and without

mounting arm)

Cruiser/Chopper

Most Cruisers and Chopper bikes have lots of space on the handle bar and usually have round mirror stems.

This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

60mm

25m

m

Mirror Mount Motorcycle Mount(shown with and without

mounting arm)

Scooter/Moped/Underbones

Scooters usually have a solid dashboard and no handlebar to secure a mount to.

The Mirror Mount is recommended for this type of bike, as long as the mirror stems are round.

Whilst the mount might attach to other shapes of mirror stem we can’t guarantee a secure fit on anything other than a round stem.

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

Mirror Mount

Tricycle/Quad/3 Wheeler/4 Wheeler

Trikes and Quad bikes can come in various styles such as Cruiser/Off Road/Scooter/Chopper/Sport and therefore have a varying bar and mirror set ups.

This kind of bike can often fit both the Motorcycle Mount or the Mirror Mount.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

60m

m

25m

m

Mirror Mount Motorcycle Mount(shown with and without

mounting arm)

Touring Bikes

Touring bikes have a very varied handlebar set up across different models and brands.

Motorcycle Mount or Mirror Mount is recommended depending on space constraints and personal preference.

The Mirror Mount can even fit on some cross bars, if present.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

Mirror MountFits round mirror stemsSuits bar sizes Ø3/8” (10mm), 1/2” (12mm), and 9/16” (14mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

60m

m

25m

m

Mirror Mount Motorcycle Mount(shown with and without

mounting arm)

Sport Bike

Sports bikes generally have very busy and condensed handlebar set up.

We recommend the Motorcycle Mount but it is unlikely to fit most Sports bikes.

Motorcycle MountFits round handle barsSuits bar sizes Ø7/8” (22mm), 1” (25mm), 1-1/8” (28mm) and 1-1/4” (32mm)

ImportantEnsure the mount and phone do not obstruct movement of handlebars or block vision.

60mm

25mm

Motorcycle Mount(shown with and without

mounting arm)