Motorbikes /Quads - BEROILberoil.be/sites/default/files/book/d6c201ccd5e1d22c9b92c1a3b005bd2... ·...

SADAPS BARDAHLAdditives & Lubricants

ZI Tournai Ouest II - Rue du Mont des Carliers 37522 TOURNAI (BELGIUM)

Tel.: +32 69 59 03 60www.bardahl.be 01

/201

1

Motorbikes /Quads

Manufacturer since 1939

Champions of innovation:More than 70 years of technological evolution

Research and development. Today, innovation is the major asset of competitive

industrial companies. BARDAHL laboratories have been developing solutions for 70 years which meet the ever more

strict technological requirements. This permanent research is based on laboratory tests, engine trials, OEM approvals, etc.

A different approach.Our strategy is orientated towards a widened vision of the future where the balance between the company growth, people’s well-being and the planet’s health must be achieved.The ISO 14001 certification of our plant in Tournai plus the development of more ecological products and the use of inert propellant gas protect the environment and truly reflect our will to succeed.To go further, we have embarked on a patronage programme with the French Forest National Office (Office National des Forêts) and have started a

voluntary three-year programme to reforest state-owned woods in Retz in the Aisne (France).

We contribute therefore to carbon dioxide sequestration and the reduction of greenhouse gases.

A trademark present all around the world.

Today, BARDAHL trademark is present on the 5 continents and its products are sold in more than 90 countries.

We owe this “Success Story” to the unique formula originated by Ole Bardahl but also to a permanent research of our BARDAHL engineers who innovate and contribute to offer you a world without friction.

14001

The ISO 9001 certification by the AFAQ crowns our policy towards the perfect quality.

The ISO 14001 certification proves our permanent commitment to reduce

the impact of our activity and our production

on the environment.

Production sites

“Aerosols” production unit

Top secret innovation.In the 30’s Ole Bardahl emigrated from Norway and through his racing involvement developed a revolutionary lubricating concept based on the reversal of polar attraction in oil molecules. No matter the mechanical system Polar Plus leaves an anti-friction, anti-wear and extreme pressure film on all the moving metal

components. The product was so miraculous that the American army decided to classify it as top secret until the end of the Second World War. BARDAHL products

appeared in France in 1954 where they are now developed for industrial, automobile, agricultural and do-it-yourself use.

The manufacturerguarantee.

Established on two production sites, SADAPS BARDAHL controls its processes from the conception of the formulas to the distribution of finished products, with a constant will to improve the quality. This achievement can be seen in continuous industrial investments and rigorous controls throughout the manufacturing chain.

EXCLUSIVEPOLAR PLUSF O R M U L A

EXCLUSIVEFULLERENEF O R M U L A

The use of lubricants is necessary to:• Facilitate sliding between two moving machine parts. • Avoid seizure even under heavy loads.

• Reduce and avoid premature wear of equipment. • Protect machine parts from oxidation and corrosion.

• Avoid overheating and eliminate excess heat generated by friction. • Improve water proofing and protection from other external pollutants.

The BARDAHL “POLAR PLUS” principleBardahl lubricants are formulated from “polar active” agents. Those components behave like micro-magnets. They are attracted by metal surfaces on which they adhere to form an extremely resistant lubricating film.This molecular film prevents damage generated by the ‘rough surfaces’ on metal parts which cause early wear and seizure.

Without BARDAHL

Moving metal surface


Friction pointsFriction points

Metal parts come into contact with each other through the ‘rough peaks’ on their

surfaces and it’s these peaks that bear all the load and pressure which in turn

causes undue wear and eventual seizure.

The lubricating film formed by the “POLAR PLUS” active agents avoids contact between peaks and therefore reduces wear

and seizure risks.

Curative treatment: BARDAHL reduces wear

Preventive treatment: BARDAHL avoids wearWith BARDAHL


Without friction pointsWithout friction points


The “friction meter“, our mobile demo machine, allows us to demonstrate this molecular

lubricating film and to illustrate the protection offered to

machined surfaces.

The FULLERENE C60 principleBARDAHL has been the first company in the world to apply the Fullerene chemistry to the lubricants field. We used the fact that Fullerene spheres act like extremely stable micro-bearings: coming between surfaces in contact, they assist lubricity and reduce friction.The BARDAHL formula is particularly efficient in difficult lubricating conditions:• Cold starts (mainly responsible for wear)• Difficult working conditionsLaboratory tests have shown that the BARDAHL FULLERENE formula can reduce friction and wear by up to 70 % at ‘start up’ and by up to 34 % while running at normal temperature.

The BARDAHL formula is efficient as a result of its triple protection against wear, friction and deposit reduction.• This formula creates a thick lubricating layer on the surface that needs protection.• The “POLAR PLUS” molecules form a line of second defence to protect from wear, because they reduce friction and deposits.• Moreover, Bardahl has used C60 Fullerene in its formula: Fullerene molecules act like spherical micro-cushions giving final protection to the engine.

The FullereneC60 molecule

BARDAHL PRINCIPLES

BARDAHLPROOFS

BARDAHLMOTORBIKES OILS

Controlled efficiencyThe efficiency of a lubricant can be established by many performance tests.

Among them, the 4 ball test which shows best the “extreme pressure” and “anti-wear” performance.

The results of BARDAHL lubricants are always exceptional thanks to the BARDAHL “POLAR PLUS” film and the “FULLERENE C60” principle.

4 BALL EXTREME PRESSURE TEST 4 BALL ANTI-WEAR TEST

+0%

5000 N

+10% +20%

Weld load in Newton

ISO 220 gear oil + BARDAHL active components (%)

2700 N

4250 N

+0%

1250 N

3100 N

5000 N

+10% +20%

Weld load in Newton

ISO 46 hydraulic oil + BARDAHL active components (%)

+0%

0,26

0,05

0,01+10% +20%

Wear mark in mm2 Wear mark in mm2

ISO 220 gear oil + BARDAHL active components (%)

+0%

0,4

0,15

0,05

+10% +20%

ISO 46 hydraulic oil + BARDAHL active components (%)

WithBARDAHL

WithoutBARDAHL

All of our lubricants are formulated and controlled in laboratories.Spacing out the lubrication periodicity, they help to protect the environment.

This test shows the lubricant capacity to prevent wear and protect material thereby increasing lifespan under the

most difficult working conditions.Wear is reduced by a factor

of eight thanks to the BARDAHL molecular film.

This test shows the lubricant capacity to avoid seizing during increased loads.

BARDAHL lubricants avoid material damage.The load required to effect seizure is

4 times higher when BARDAHL additives are present.

54

NOBEL PRIZE WINNER FOR CHEMISTRY in 1996

Up to 90 % less friction Up to 70 % less wear The best mechanical protectionUp to 5 % more power and torqueImproved engine accelerationReduced fuel consumptionEngine protection at high temperature Perfect protection, even in case of oil or coolant shortage

BARDAHLXTC C60

andXT4 C60

A first step in thecompetition world

BARDAHL lubricants do not contain toxic or harmful additives, such as graphite, ceramics, chlorinated paraffin, PTFE, Teflon ®, lead, etc.

BARDAHL C60RACING OILS

CLUTCH PERFORMANCE TECHNOLOGY

7

BARDAHL XT – XTCMOTORBIKE RACING OILS

BARDAHL XT-4 C60RACING

Premium performance lubricant, especially developed for 4-stroke hypersport, sport-touring, on/off-road powerful motorcycles, both multi-cylinder and monocylinder types, with or without oil-bath clutch. Thanks to its fully synthetic formula and the addition of particular polymers with a high shearing strength, BARDAHL C60 lubricants give excellent performance in terms of resistance to thermal deterioration due to oxidation and strengthen the lubricating oil film, even under the most severe working conditions. Thanks to its special additives, the effectiveness of its Fullerene Polar Plus formula and the Clutch Performance Technology intended for 4-stroke motorcycles with motor-integrated gear shift and oil-bath clutch, XTC C60 MOTO OILS enhances the transmission and engine performance, thus improving better acceleration as well.

BARDAHL XT4 C60 Racing is a special lubricant for high sporting use, formulated for 4 stroke road motorbikes, with high potential performance, with or without oil bath clutches, air or water-cooled. Formulated with a synthetic base and special HIGH SHEAR STABILITY polymers, BARDAHL XT4 C60 Racing maintain the viscosity of the oil and guarantees a perfect lubrication in all extreme conditions and even in high & low temperatures.

BARDAHL Advanced Technology combined with POLAR PLUS & FULLERENE C60 FORMULAS and the CLUTCH PERFORMANCE TECHNOLOGY (special additive for 4 stroke engines equipped with an oil bath clutch) guarantee an efficient lubrication of the engine & clutch, and give your engine a high potential and better accelerations.

For 70 years, BARDAHL has been involved in many different types of MOTORSPORTS around the World: car races, Formula 1, motorbikes, Go-Karts, boat races, Jet ski, All Terrain Vehicles (ATV) and other engine powered sports.For 70 years, Racing Teams have been using BARDAHL Lubricants to become champions in all types of races worldwide.Bardahl C60 Racing Oils are used by many different Motorbike Racing Teams. BARDAHL is the official oil supplier in Europe for Beta Moto, Bimota, Moto Morini, Honda Italy (cars),Suzuki GB Youth Team MX and Vespa.

BARDAHL 4 STROKE Moto lubricants are formulated to meet the severe technical requirements of modern engines and the demanding needs of motoriders who want better accelerations and maximum performance in total safety and reliability.

Thrusters with more specific power and higher speed (often associated with a transmission system with integrated gear and clutch in oil bath) require technologically advanced lubricants, formulated ad hoc to allow a total lubrication of the engine, clutch and gearbox.

The so-called Clutch Performance Technology used by BARDAHL to formulate our range of 4 stroke allows for:

• maximum protection and lubrication of gearbox and clutch • an optimal transfer of torque transmission • maximum acceleration and greater driving comfort

Thanks to the exclusive Polar Plus – Fullerene formulas and the Clutch Performance Technology, BARDAHL manufactures products that help enhance the efficiency of transmission by ensuring the best protection of engine and gearbox in any driving condition.

In April 2006 the JASO (Japanese Automobile Standards Organization) has revised the JASO T903: 1998 specification related to 4ST Moto lubricants.

The JASO classification is based on the ability of a lubricant to allow proper adhesion between clutch disks so that the torque can be transmitted from the engine gearbox without slippage.

By measuring 3 specifications (DFI-SFI-STI) that assess torque transfer under conditions of dynamic and static friction and the speed of transfer, lubricants can be classified into:

• JASO MA allows for a high friction (suitable for oil bath clutches)• JASO MB allows for a minor friction

BARDAHL C60 Motorbike 4 stroke Oils with Polar Plus & Fullerene :

Ref. 347040 / 24 x 1 Liter

1 Liter50 Liters

200 Liters

XT4 C60 10W-60 Ultra grade • Prevents the oil from burning• Stabilizes the oil viscosity• Offers an efficient lubrication during cold start,

high temperatures and extreme conditions• Reduces friction in the engine and increases

horse power and torque• Reduces wear on camshafts , crankshaft and

gearbox• Makes gear shifting easier100% synthetic.

• API SM / JASO T903:2006 MA-MA2

XT-4 SAE 10W-60

Ref. 347054 / 200 Liters

2 or 3 sizes available

XT-4



O C T A N EB O O S T E R

WORLDCHAMPIONS

EUROPEANCHAMPIONS

NATIONALCHAMPIONS

REGIONALCHAMPIONS

6



You can use all the XTC C60 for your 4 stroke jet-skis, snowmobiles or

boat engines

Wineverywhere

with Bardahl !

BARDAHL XTC C60 Racing Oils are special lubricants for high sporting use, formulated for 4 stroke off road & road motorbikes. They have been developed for high potential performance engines, mono or multi cylinders, with or without oil bath clutches, and water or air cooled.

Formulated from fully synthetic base oil and special HIGH SHEAR STABILITY polymers, BARDAHL XTC C60 Racing Oils maintain the

oil viscosity and guarantee a perfect lubrication in all extreme conditions and even at high temperature.

BARDAHL XTC C60 Racing SAE Moto Oil: • Prevents the oil from burning

• Stabilizes the oil viscosity • Offers an efficient lubrication when cold starting, at high temperatures and

in extreme conditions • Reduces friction in the engine and increases horse power and torque

• Reduces wear on camshafts, crankshaft and gearbox • Makes gear shifting easier

BARDAHL Advanced Technology combined with POLAR PLUS & FULLERENE C60 FORMULAS and the CLUTCH PERFORMANCE TECHNOLOGY (special additive for 4 stroke engines equipped with an oil bath clutch) guarantee an efficient lubrication of the engine & clutch, and give your engine a high potential and better accelerations.

BARDAHL XTC C60COMPETITION OILS

BARDAHL XTC C60COMPETITION OILS

8 9

XTC SAE 15W-50

XTC C60 15W-50 On RoadFor Motorbikes that require high viscosity oil for high temperatures and long races or endurance. Ideal for high performance engines, single or multiple cylinders, Road racing, Superbike, Supermotard etc... A little more time is taken to reach the optimum engine temperature so ideal for use in warm ambient temperatures. 100% synthetic.


XTC SAE 20W-50XTC C60 20W-50 On RoadFor Motorbikes that require high viscosity oil for high temperatures and long races or endurance. Ideal for high performance engines, single or multiple cylinders, Road racing, Superbike, Supermotard etc... A little more time is taken to reach the optimum engine temperature so ideal for use in warm ambient temperatures. 100% synthetic.


XTC C60 10W-30 On RoadFor Motorbikes that require low viscosity lubrication. Excellent for sprint races.Very good for small engines, 1 or 2 cylinders up to 600 cc or more. Winter and Summer use.100% synthetic.


XTC SAE 10W-30

XTC C60 10W-50 On Road For Motorbikes that require high viscosity oil for high temperatures and long races or endurance. Designed for high performance engines with single or multiple cylinders, Road Racing, Superbike, Supermotard etc... Winter and Summer use.100% synthetic.


XTC SAE 10W-50XTC C60 10W-40 On Road For Motorbikes that require low viscosity lubrication. Excellent for sprint races.Very good for small engines, 1 or 2 cylinders up to 600 cc or more. Winter and Summer use.100% synthetic.


XTC SAE 10W-40

XTC C60 5W-40 On Road For use at low temperatures.Engine will raise faster to working temperatures. Excellent for sprint races, trials etc…Better for winter use100% synthetic.


XTC SAE 5W-40

XTCEXCLUSIVEPOLAR PLUSF O R M U L A


Ref. 348140 / 24 x 1 Liter Ref. 348152 / 50 Liters Ref. 348154 / 200 Liters

Ref. 338140 / 24 x 1 Liter Ref. 338152 / 50 Liters Ref. 338154 / 200 LitersRef. 326140 / 24 x 1 Liter Ref. 326152 / 50 Liters Ref. 326154 / 200 Liters


Ref. 341140 / 24 x 1 Liter Ref. 341052 / 50 Liters Ref. 341054 / 200 LitrersRef. 324140 / 24 x 1 Liter Ref. 324152 / 50 Liters Ref. 324154 / 200 Liters

1 Liter 50 Liters200 Liters

All these products are available in 3 sizes:• 1 liter bottle• 50 liter drum• 200 liter drum

BARDAHL XTC C60OFF ROAD SPECIAL

BARDAHL SO-4 STROKESCOOTER OILS

10 11

XTC C60 10W-60 Off roadFor single or multiple cylinder 4 stroke motorbikes used in off road sprint races, excellent for cold & mid temperatures and low & mid grip tracks100% synthetic.

• API SM/JASO T903: 2006 MA-MA 2/



XTC SAE 10W-50

SO-4 Scooter Oil 5W-40Direct lubrication in cold & mid temperatures. For Scooters up to 500 cc or more.100% synthetic.

• API SL / JASO T903:2006 MA /

SO-4 SAE 5W-40

XTC SAE 10W-60



XTC SAE 10W-40




Total protection performance

BARDAHL exclusive POLAR PLUS - FULLERENE FORMULA offers a triple-layer protection:a lubrication film on the surface, a layer of POLAR MOLECULES and additional FULLERENE C60 molecules as a final protection mechanism.

• The POLAR PLUS molecular lubricating film adheres permanently on the engine metal parts by creating a permanent security barrier.

• The FULLERENE C60 molecules act like microballs between metal surfaces and therefore reduce wear, preserving the engine and transmission.

The POLAR PLUS and FULLERENE C60 formula ensures a level of performance far superior to conventional lubricants.

Properties :The use of high quality synthetic bases and special high shear stability polymers allows for outstanding performance in terms of resistance to thermal degradation and oxidation, and effectiveness of the lubricating oil film even under the most extreme conditions.

Thanks to its special additives, the effectiveness of the Fullerene Polar Plus formula and the Clutch Performance Technology intended for 4-stroke motorcycles with motor-integrated gear shift and oil-bath clutch, BARDAHL XTC C60 off-road enhances the transmission and engine performance, thus improving acceleration as well.

XTC C60 Off-road guarantees the control of deposits, allowing to extend engine life.

XTC C60 Off-road has been specifically formulated to meet the multiple and conflicting lubrication requirements of off-road 4 stroke Moto engines.• Resistance to heat• Excellent lubrication of gearbox and clutch• Prevents the oil from burning• Stabilizes the oil viscosity• Offers an efficient lubrication when cold starting, at high temperatures and in extreme conditions• Reduces friction in the engine and increases horse power and torque• Reduces Wear on camshafts, crankshaft and gearbox• Makes gear shifting easierBARDAHL XTC C60 Off-road is indicated for the following categories of bike:• Cross/Enduro• ATV

XTC SO-4Total protection performance

BARDAHL exclusive POLAR PLUS FORMULA offers a double layer protection: a lubrication film on the surface and a layer of POLAR MOLECULES creating a permanent security barrier in between the metal surfaces of the engine.The extraordinary properties of BARDAHL POLAR PLUS FORMULA reduce wear, preserving the engine and transmission.

BARDAHL formula ensures a level of performance far superior to conventional lubricants.Properties:High performance lubricant for modern scooter 4 stroke engines.The use of high quality synthetic bases and special high shear stability polymers allows for outstanding performance in terms of resistance to thermal degradation, strengthened resistance of the lubricating film at high temperatures, increased fluidity enabling immediate and effective lubrication, including when the engine is cold.

SO-4 SCOOTER operates actively on the control of deposits formed at low temperatures due to the continuous stop and go, and at high temperatures when used at higher speeds. Thanks to the BARDAHL POLAR PLUS formula, SO4 SCOOTER oil always ensures an effective lubrication and gives an increased protection to the engine, even under the most critical operating conditions. Guarantees also a drastic reduction of friction in the engine and increased performance.

SO-4 Scooter Oil 10W-40Direct lubrication in cold & mid temperatures. For Scooters up to 500 cc or more.100% synthetic.

• API SL / JASO T903:2006 MA /

SO-4 SAE 10W-40

Ref. 340152 / 50 Liters Ref. 340154 / 200 Liters

Ref. 345040 / 24 x 1 Liter Ref. 345052 / 50 Liters Ref. 345054 / 200 LitersRef. 346040 / 24 x 1 Liter Ref. 346052 / 50 Liters Ref. 346054 / 200 Liters

Ref. 340140 / 24 x 1 Liter Ref. 352140 / 24 x 1 Liter Ref. 352152 / 50 Liters Ref. 352154 / 200 Liters


BENELLI QUATTRO NOVE 49X - 2 st

roke

AQUABIKE RacingIncreases the Engine Power.Contains the unique additive Bardahl Octane Booster that increases the Petrol octane rate.Maximum engine protection against seizure and wear.Prevents “ RING STICKING “.100% synthetic.

• API TC / JASO FC / TISI / GLOBAL EGD

AQUABIKE RACING

2 STROKE JET SKI


5TIMES WORLD

CHAMPION

Total performance protectionThe exclusive anti friction BARDAHL POLAR PLUS FORMULA forms a molecular lubricating film that creates a permanent security barrier and drastically reduces friction between all engine parts.

BARDAHL lubricants therefore offer a maximum anti seize protection, protect the crankshaft and connecting rod, and give increased power and

efficiency to the engine.

BARDAHL ensures performance far superior to conventional lubricants.

Properties:Premium performance lubricants for high performance 2 stroke motorbikes.

The BARDAHL POLAR PLUS FORMULA gives your bike more power and the best protection, even in the most difficult conditions.

BARDAHL 2 STROKE OILS have been formulated with the innovative chemistry of high molecular mass polisobutene and with low ash contents additives. They therefore reduce fuel venting

through the exhaust (Smokeless technology), ensuring maximum protection and better cleanliness of the engine.

Properties:Lubricants for transmissions of motorcycles with separate lubrication gear. Clutch Performance Technology. BARDAHL exclusive POLAR PLUS – FULLERENE FORMULA offers a triple-layer protection:a lubrication film on the surface, a layer of POLAR MOLECULES and additional FULLERENE C60 molecules as a final protection mechanism. Excellent antiwear protection, high level of lubrication, full protection of mechanical components, even in difficult operating conditions and enhanced performance of transmission allowing soft and precise shifting.

Ref. 258049 / 6 x 4 Liters

PHOTOEN ATTENTE

Ref. 257140 / 24 x 1 Liter

BARDAHL 2 STROKE OILS

BARDAHL GEAR BOX OILSFOR MOTORBIKES - ATV

12 13

KTS Scooter Racing For automatic mixing systems.Contains the unique additive Bardahl Octane Booster that increases the petrol octane rate.The use of special synthetic ester guarantees a higher protection to the engine.100% synthetic.

• API TC/JASO FC/ISO EGD

KTS

KXT Racing Manual or automatic oil mix.Concentrated formula to be used at low dosage rate.Formulated for 2 stroke sports motorcycles.Increases the engine power.Contains low ash contents additives.New generation100% synthetic oils.• API TC/JASO FC/ISO EGD

KXT



SCOOTER RACING

SCOOTER Synt Manual or automatic oil mix.Contains the unique additive Bardahl Octane Booster that increases the petrol octane number.High-performance lubricant high power auto-mixing, specific for 2 stroke scooters. 100% synthetic.

• API TC/JASO FC

SCOOTER SYNT

VBA Synt Manual or automatic oil mix.Perfect for mini bike racing.High lubricity and detergency for maximum engine cleaning.100% synthetic.Protects against mechanical wear and corrosion.

• API TC/JASO FC

VBA SYNT

2 STROKE MOTORCYCLES

2 STROKE SCOOTERS



KGR Injection For automatic mixing systems.Contains the unique additive Bardahl Octane Booster that increases the petrol octane rate. 100% synthetic.


KGR INJECTION

KGR Fuel Mix For manual oil mix.Concentrated formula to be used at low dosage rate.Contains the unique additive Bardahl Octane Booster that increases the petrol octane rate. 100% synthetic.


KGR FUEL MIX


GEAR BOXClutch Performance Technology: improves efficiencyof transmission for maximum accelerationMaximum protection of clutch and gearboxProtective lubrication and cleaning of all gears ofthe transmissionHigher resistance against thermal oxidation anddegradation

• API SG-JASO T903: 2006 BUT-SAE 10W-30

GEAR BOX SAE 10W-30

BARDAHL MARINE 2 STROKE OILSEXCLUSIVEPOLAR PLUSF O R M U L A


2 STROKE OUTBOARD ENGINES

DIRECT Injection• Maximum protection for piston, combustion chamber

and spark plug• Ecological effect against deposits at all temperatures,

prevents ring sticking and unusual wear from ring jacking.• Superior protection against rust , corrosion and wear.• Smokeless technology.• Has NMMA TC – W3 specs for engines with fluor

direct injection.100% synthetic.

• NMMA TC-W3

DIRECT INJECTION










Ref. 227040 / 24 x 1 Liter

Ref. 220040 / 24 x 1 Liter

Ref. 221040 / 24 x 1 Liter

Ref. 201140 / 24 x 1 Liter Ref. 202140 / 24 x 1 Liter

Ref. 206040 / 24 x 1 Liter

Ref. 402040 / 24 x 1 Liter

BARDAHL SPECIALS

15

• Protects new engines against wear (adjust Full Metal after the first oil drain).

• Restores microscopic wear, piston, cylinders, camshafts, etc...

• Restores sealing piston-cylinder.• Protects against oil oxidation. • Improves the engine performance from old

& new motorbikes.• Stabilizes the warm oil viscosity.• Improves gear shifting. • Reduces engine noise.

BSF RACINGOCTANE BOOSTER

BSF Octane Booster is a professional product especially developed for racing engines.• Increases the octane rate by 5 points

(anti-knock power).• Enables a controlled and more uniform

combustion.• Increases the engine performance.• For two- and four-stroke engines.• 1 Litre treats 330 Litres of petrol.

OCTANE BOOSTER MOTORCYCLE

Octane Booster Motorcycle• Increases instantly the octane rating of gasoline of 4-5 points and leads to a controlled uniform combustion.

• Increases the power and engine life.• Anti-0248: deletes the knocking due to pre-ignition and detonation or low octane petrol

• Inhibits the phenomenon of post-ignition caused by deposits in the combustion chamber.

BCS 400 EXTREME PRESSUREDRY LUBRICANT

BCS 400 Dry Lubricant can be used:• To lubricate dry chains (it protects

against dust, sand, mud, water,…).•To protect forks and absorber pistons

against wear, rust and corrosion.•To lubricate gas cables,…

RACING CHAIN LUBE MOTORCYCLE - KARTS

Racing Chain Lube can be used for:• Wet chain lubrication for road use.• High lubrication in cold and warm

temperatures.• Very successful in karting.• For best result, apply a few hours

before riding.





Ref. 100039 / 6 x 1 Liter

Ref. 2812 / 12 x 75 ml

Ref. 104011 / 24 x 150ml

Ref. 191212 x 500 ml - Aerosol


Bardahl XTF Fork oil and Bardahl XTF Shock absorber oil contain components which minimize:• Oil oxidation• Oil foaming• Gum and varnish deposits• Seal hardening• Seal leakage• Wear of components

Bardahl XTF Fork Oil is available in different viscosity grades from SAE 5 up to SAE 20. Use the viscosity of XTF recommended by your fork or shock manufacturer. If you wish to change the suspension performance of your forks, use lower viscosity oils to obtain a "softer" ride and more viscous oils to stiffen ride. Because of the high viscosity index these fork oils can be considered as multigrade fork oils.

Bardahl XTF Racing Shock absorber Oil is a premium quality hydraulic oil / lubricant designed to maximize the performance of

motorcycle and car shocks.

Full Metal Moto is a high technological oil additive for new motorbike engines or old high mileage motorbike engines.

Full Metal Moto is a 7 action oil additive preventive + curative

BSF/OB is a professional product specific for racing engines with high compression ratio.

RECOMMENDED AND APPROVED BY MAJOR MANUFACTURERS

In our Brake Fluid Range we also have DOT 3 and DOT 5 silicone Fluid !

Ask your dealer for more information

ATF Fork Oils are also deliverablein 5, 25, 60 litre. Ask your dealer for more information

BARDAHL BRAKE FLUIDS

BARDAHL FORK & SHOCK ABSORBER OILS

BARDAHL RACING FLUIDS AND OILS

14

Brake fluid with a high boiling point.Suitable for any type of braking system for cars, trucks, buses, karts, etc.100% synthetic.• SAE J 1703• US FMVSS 571.116• DOT 4

Offers perfect stability and performance in any operating condition.Recommended for ABS and Racing systems.100% synthetic.• SAE J 1703• US FMVSS 571.116, DOT 4 e DOT 5.1

DOT 4 RACINGBRAKE FLUID

DOT 5.1 RACINGBRAKE FLUID

FULL METAL MOTOENGINE PROTECTOR + RESTORER

XTF RACINGSHOCK ABSORBER OIL

XTFFORK OIL

Viscosity at - 40°C max. 800 cstViscosity at + 100°C min. 2,2 cstDry boiling (°C) min. 275Wet boiling (°C) min. 185PH 7,542

XTF Fork Oil • Excellent anti foam properties• Superior corrosion protection properties• Superior oxidation resistance• Excellent temperature stability• Formulated to maintain seal pliability

XTF Racing Shock absorber Oil• Excellent anti foam properties• Superior corrosion protection properties• Superior oxidation resistance• Excellent temperature stability• Formulated to maintain seal pliability

Ref. 53551 / 12 x 1 LiterRef. 56504 / 24 x 250 ml Ref. 53651 / 12 x 1 LiterRef. 53602 / 24 x 250 ml

Ref. 56682 / 25 LitersRef. 56655 / 4 x 5 LitersRef. 56651 / 12 x 1 Liter

Ref. 53555 / 4 x 5 Liters Ref. 53655 / 4 x 5 Liters

Ref. 56545 / 20W(40) 24 x 500 mlRef. 56535 / 15W(30) 24 x 500 mlRef. 56525 / 10W(30) 24 x 500 mlRef. 56515 / 7,5W(20) 24 x 500 mlRef. 56505 / 5W(20) 24 x 500 mlRef. 56501 / 2.5W 24 x 500 ml

BARDAHL XTC C60OFF ROAD SPECIAL BARDAHL SPECIALS

10 17

XTCBARDAHL SPECIALS

16

BRO is a penetrating oil with high lubrication propertiesCan be used for:• Chain lubrication (O ring) protects

against all kinds of dust, sand, mud, water, etc...

• Releases bolts and nuts. • Can be used as High penetrating and

High pressure lubricant for all uses.• Protects against rust & corrosion.

SILICONE LUBRICANT can be used:• To improve lubrication for metal and non

metal compounds. • To protect against water , rust and

oxidation.• To form an antistatic film against dust.

BROPENETRATING OIL

SILICONE LUBE DRY EN CLEAN LUBRICATION

POLY S2 MULTIPURPOSE HIGH QUALITY GREASE

CERAMIC PASTE

BD 50 MULTISPRAY

Grease containing micro ceramic components and resisting high temperatures.• Prevents oxidation by contact from

copper en metal.• Prevents cold welding between 2 metals.• Very useful for stainless steel metals RVS. • Useful on small needle cages (piston,

gearbox , etc...).• Resists temperatures up to +900°C. • Can be used as a mounting paste.

BD 50 Multispray with Ester oil and EP additives • Lubricates and penetrates• Repels moisture• Cleans and protects• Fights rust and water• Cleans all metals, plastics etc..• Contains no silicone

100% Synthetic Polymer grease for long life application, general use on motorbikes• For use between -30°C to + 170°C• Very strong against wear and high

pressure • Resists against water, dust, sand, etc..• For slow and fast rotations.• Axles, bearings,etc...

New design Gel Doz, Easy to use, Practical, No Waste, Measuring Pump, Does not drip.

GEL DOZ FF 12Thread Lock

Medium resistance

GEL DOZ FF 40Thread Lock

Strong Resistance

GEL DOZ FC 32Cylinder piece fixingvery high resistance

GEL E 77Sealing of tubes

and pipes

GEL DOZE ANAEROBIC GELS

1CEASY GASKET

High quality universal gasket compound. Easy to work and replaces all types of pre formed gaskets.• For gearboxes,waterpumps,valve

covers,crankcases , etc...• Non Conducting product.• For temperatures from -50°C to +260°C.• Avoid permanent contact with petrol.• Can be used with metal, glass, rubber,

plastics, wood, etc...• Black colour

NCE 3ELECTRICAL CONTACT CLEANER

NCE 3 Electrical Contact cleaner• Cleans electronic and electrical

contacts.• Copper de-oxidant. • Not greasy.• Repels moisture, prevents oxidation.Warning : make sure parts are dry before reconnecting device.

POLY SEALER PS 55

MS-Polymer sealer is a one component, strong elastic adhesive/sealant, cures quickly under influence of air humidity. Paintable after skin forming• Fixing and sealing of metal and plastic parts. • Bodywork metal or plastic.• Vibration suppression between metals,

wood, etc...• You can seal almost everything with

this PS55

DEGREASERBRAKE CLEANER

All purpose degreaser without chlorine , fast drying.• Cleans metal parts, chains, bearings,

brakes.• Degreases before painting.



Ref. 322112 x 500 ml - Aerosol Ref. 1700 / 24 x 400 g

Ref. 1821 / 12 x 200 g

Ref. 1701 / 12 x 200 g Ref. 2060 / 12 x 240 g

Ref. 5042 / 10 x 35 g Ref. 5044 / 10 x 35 g Ref. 5048 / 10 x 35 g Ref. 5046 / 10 x 35 g

Ref. 2059 / 12 x 120 gRef. 1892

12 x 500 ml - Aerosol

Ref. 2068 / 12 x 290 ml blackRef. 2067 / 12 x 290 ml whiteRef. 4451

12 x 500 ml - Aerosol

BARDAHL XTC C60OFF ROAD SPECIAL BARDAHL SPECIALS

10 19

XTCBARDAHL SPECIALS

18

• Cleans all parts on motorbikes (plastics, metal, …)

• Spray product and wait for 5 minutes before cleaning with high pressurized water.

• For hand cleaning: spray product and wait for 5 minutes before cleaning with a soft cloth.

• Cleans grease, oil, paint, tar, etc..• Citrus perfumed.• Leaves a protective film on your hands. • Economical sizeDo not forget to order the corresponding special hand pump and wall holder.

Ref. 3450 / 6 x 500 mlRef. 0051

Pump + wall bracket

UNIVERSALMOTORBIKE CLEANER

HANDCLEANER CLEANS AND PROTECTS YOUR HANDS

INSTEAD OF LEAD LEAD REPLACING ADDITIVE

INJECTOR & CARBURETTOR CLEANER

• Prevents vapor lock (air bubbles in the fuel due to heat).

• Better starting with warm engine (warm fuel).

• Lubricates valves.• 1 bottle (250ml) treats up

to 250L of fuel.

• Cleans injectors and carburettor, valves and combustion chamber from motorbikes.

• Reduces exhaust fumes.• Restores engine performance

and power.• Reduces fuel consumption.• Use every 5000 km.

Ref. 2109 / 24 x 300 ml

Ref. 2219 / 12 x 250 ml

PETROL FUEL TREATMENT

• Special petrol additive to lubricate the upper part of the engine.

• Lubricates valves.• Engine will run cooler. • Better engine accelerations. • 1 can (300ml) treats 80L

of fuel.

Ref. 2009 / 24 x 300 ml

CARBURETTOR BODY & THROTTLE CLEANER

• Cleans throttle & carburettor body.

• Spray product on the carb body en dry with compressed air.

• Spray on the throttle valves while engine is running (short strokes).

• Can also be used for cleaning carbon deposits.

Ref. 1115 E12 x 400 ml - Aerosol

GEARBOX OIL ADDITIVE

• Use only in gearboxes without oil clutch plates (dry clutch).

• Makes gear shifting easier. • Reduces noise and friction.• Reduces wear in the gearbox.• 1 tube treats 1 gearbox.

ENGINE STOP LEAK

• Stops engine oil leaks and reduces exhaust oil fumes due to hard rubber seals.

• Restores rubber seals in the engine and valve steals.

• 1 can treats up to 6L of oil.

Ref. 2913 / 6 x 3 Liters

RADIATOR STOP LEAK

• Stops leaks in the radiator.• Can be used preventively. • Mix in warm coolant or water.• Compatible with all existing

Coolants.• 1 can treats up to 20L

of coolant.

Ref. 4001- 24 x 300 ml

UNIVERSAL

COOLANT

• This universal coolant can be mixed with all existing engine coolants.

• Ready to use -25°C (exists also in -35°C or antifreeze).

• Protects against corrosion.

• Protects against overheating.

Ref. 7313 / 5 Liters

RADIATOR FAST FLUSH

• Cleans the entire coolant system.

• Eliminates rust & lime.• Improves the engine cooling.• Pour 1 can in cooling system,

run the engine for at least 30 minutes and then drain coolant. Flush with fresh water and refill with Bardahl appropriate coolant.

Ref. 4010 / 24 x 300 ml

TIRE STOP LEAK - INFLATOR

• Stops small leaks in tires.• Inflates the tire. • Very useful if you have a flat

tire just before the race starts.• 1 aerosol = 1 treatment.

Ref. 4941 - 13 x 300 ml

DRY AIR FILTER CLEANER + LUBE KIT

• For use with Dry Cotton Air filters.• Prevents that dust, sand and moisture gets

in the engine.• After cleaning the filter spray the product

on the outside of the filter.

Lubricant aerosol onlyRef. 2979 / 12 x 150 ml

AIR FILTER OIL PURPLE FOAM

• For wet foam air filters. • Prevents that dust, sand

and moisture gets in the engine.

• After cleaning the foam filter put the clean filter in the Purple foam liquid.

• Preparation of the product: Mix 2.5 parts Purple foam oil with 1 part Petrol shake and the product is now ready to use.

Ref. 6310 / 12 x 455 ml Ref. 9119 / 6 x 1 kit

Ref. 1201 / 24 x 300 ml Ref. 1045 / 6 x 227 ml

Motorbikes /Quads - BEROILberoil.be/sites/default/files/book/d6c201ccd5e1d22c9b92c1a3b005bd2... ·...

Documents

Transcript of Motorbikes /Quads - BEROILberoil.be/sites/default/files/book/d6c201ccd5e1d22c9b92c1a3b005bd2... ·...