Motherboard Layout and Features Memory Support Jumpers ...
1
SUPERMICR R CONTACT INFORMATION MNL-1121-QRG REV . 1.00 • www.supermicro.com (Email: [email protected]) • Manuals: http://www.supermicro.com/support/manuals • Drivers & Utilities: ftp://ftp.supermicro.com • Safety: http://www.supermicro.com/about/policies/safety_information.cfm © 2013 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed. PACKAGE CONTENTS X8DTG-DF QUICK R EFEREN CE GUIDE • One (1) Supermicro Motherboard LED Indicators Connectors DIMM Memory Installation Jumpers, Connectors and LED Indicators Back Panel I/O Connectors Memory Support Motherboard Layout and Features Jumpers Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors, and LED indicators. Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/ motherboard installation instructions. = mounting hole Heatsink Installation Front Panel Control (JF1) JPW2 JPW3 J11 + LE4 SW1 JPW1 FAN4 FAN8 FAN7 FAN3 FAN1 4 1 FAN2 FAN6 FAN5 JLPC80 JPCIE3 JWD1 JPL1 JPG1 LE1 LE2 JBAT1 JL1 JNMI1 JSPK1 J_UID_OW PHY x4 in x16 Slot SBX 2B SBX 1B PCI-E 2.0 SBX 2A IPMB T-SGPIO0 IPMI_LAN USB2/3 SBX 1A P2 DIMM1A P1DIMM3A P2 DIMM1B P1 DIMM2B P2 DIMM2A P1 DIMM2A P2 DIMM2B P1 DIMM1B P2 DIMM3A P1 DIMM1A P2 DIMM3B CLEAR VGA COM1 LAN2 LAN1 USB0/1 CMOS I-SATA1 JPI2C (PWR I2C) CPU1 CPU2 BIOS T-SGPIO1 I-SATA2 I-SATA3 I-SATA4 I-SATA5 I-SATA6 Intel ICH10R (South Bridge) Intel 5520 IOH-36D Intel 82576 LAN CTRL Winbond 450R BMC P1 DIMM3B Front Panel CTRL Battery X8DTG-DF J12 JPCIE1 JPCIE2 Jumper Description Default Setting JBT1 CMOS Clear Pins 1-2 (Reset) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1 LAN1/2 Enable Pins 1-2 (Enabled) J_UID_OW Red LED OW (Pins 7-8 of JF1) Off (Overwrites) JWD1 Watch Dog Pins 1-2 (Reset) Connector Description COM1 COM1 Serial Port FAN 1-8 System/CPU Fan Headers IPMB IPMB (SMB I 2 C) Header (for IPMI) JF1 Front Panel Connector JL1 Chassis Intrusion JLPC80 JLPC80 Connector JNMI1 NMI (Non-Maskable Interrupt) Header JPSK1 Internal Speaker/Buzzer Header JPW1 12V 20-pin Power Connector JPW2/JPW3 12V 8-pin PCI-Exp. Power Connectors LAN1/2 Gigabit Ethernet (RJ45) Ports (IPMI dedicated) LAN LAN (RJ45) Port for IPMI 2.0 PCI-E Slot PCI-Express 2.0 x4 in x 16 slot (JPCIE3) PWR I 2 C (JPI 2 C) Power SMB (System Management Bus) I 2 C Header SATA1 ~ SATA6 (Intel South Bridge) SATA Ports SBX 1A/2A Slots PCI-E slots GPU for (Graphics Processing Unit) support (J11/J12) SBX 1B/2B Slots PCI-E slots for GPU support (JPCIE1/JPCIE2) SW1 T-SGPIO-0/T-SGPIO-1 Serial General Purpose Input/Output Headers USB0/1, USB 2/3 Universal Serial Bus (USB) Ports 0/1, 2/3 VGA Video Port LED Description LE1 Onboard Standby PWR warning LED Indicator LE2 BMC LED Indicator LE4 Power Button OH/Fan Fail/PWR Fail/UID LED 1 Reset Button 2 HDD LED Power LED Reset PWR 3.3V FP UID Switch/3.3V SB 3.3V Ground Ground 19 20 Blue_LED_Cathode (UID)/5V SB Key Ground Key NIC2 (Activity) LED PWR Fail LED NIC2 (Link) LED NIC1(Link) LED NIC1 (Activity) LED No Connection Note: Notch should align with the receptive point on the slot Notch Release Tab Release Tab DIMM DDR3 Notch Memory Population for Optimal Performance -For a motherboard with One CPU (CPU1) installed O Branch 0 Branch 1 Branch 2 3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A 6 DIMMs P1 DIMM1A P1 DIMM1B P1 DIMM2A P1 DIMM2B P1 DIMM3A P1 DIMM3B Memory Population for Optimal Performance -For a motherboard with One CPU (CPU2) installed Branch 0 Branch 1 Branch 2 3 DIMMs P2 DIMM1A P2 DIMM2A P2 DIMM3A 6 DIMMs P2 DIMM1A P2 DIMM1B P2 DIMM2A P2 DIMM2B P2 DIMM3A P2 DIMM3B Memory Population for Optimal Performance -For a motherboard with Two CPUs installed CPU1 CPU2 Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3 6 DIMMs 1A 2A 3A 1A 2A 3A 12 DIMMs 1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B The X8DTG-DF supports up to 96 GB of Registered ECC or up to 24 GB of Unbuffered ECC/Non-ECC DDR3 1333/1066/800 MHz Memory in 12 DIMMs. Note: With Unbuffered ECC/Non-ECC Memory, a maximum of 2 GB of memory is supported per DIMM slot. 3 1 2 4 5 6 7 8 1. USB 0 2. USB 1 3. IPMI_Dedicated LAN 4. LAN 1 5. LAN 2 6. COM Port 1 (Black) 7. VGA (Blue) 8. UID Switch Insert the desired number of DIMMs into the memory slots, starting with P1 DIMM1A. Screw#1 Screw#2 Screw#3 Screw#4 Mounting Hole CPU Installation CPU Keys Socket Key Pin 1 Rev. 1.00
Transcript of Motherboard Layout and Features Memory Support Jumpers ...
SUPERMICR R CONTACT INFORMATION
MN
L-11
21-Q
RG R
EV
. 1.0
0
• www.supermicro.com (Email: [email protected])• Manuals: http://www.supermicro.com/support/manuals• Drivers & Utilities: ftp://ftp.supermicro.com• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2
013
Sup
erm
icro
Com
pute
r In
c.
All
right
s re
serv
ed.
Rep
rodu
ctio
n of
thi
s do
cum
ent
whe
ther
in p
art
or in
who
le is
str
ictly
pro
hibi
ted
with
out
Sup
erm
icro
's w
ritte
n co
nsen
t. A
ll Tr
adem
arks
are
pro
pert
y of
the
ir re
spec
tive
entit
ies.
All
info
rmat
ion
prov
ided
is d
eem
ed a
ccur
ate
at t
he t
ime
of p
rintin
g; h
owev
er,
it is
not
gua
rant
eed.
PACKAGE CONTENTS
X8DTG-DFQUICK REFEREN CE GUIDE
• One (1) Supermicro Motherboard
LED Indicators
Connectors
DIMM Memory Installation
Jumpers, Connectors and LED Indicators
Back Panel I/O Connectors
Memory SupportMotherboard Layout and Features
Jumpers
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors, and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/motherboard installation instructions.
= mounting hole
Heatsink Installation Front Panel Control (JF1)
JPW2
JPW3
J11
+
LE4SW1
JPW1
FAN
4
FAN
8
FAN7
FAN3
FAN1
4
1
FAN2
FAN
6FA
N5
JLPC80
JPCIE3JW
D1
JPL1JPG
1
LE1
LE2
JBAT1
JL1
JNMI1JSPK1
J_UID_OW
PHY
x4 in x16 Slot
SB
X 2B
SB
X 1B
PC
I-E 2.0
SB
X 2A
IPMB
T-SGPIO0
IPMI_LAN
USB2/3
SB
X 1A
P2 D
IMM
1A
P1D
IMM
3A
P2 D
IMM
1B
P1 D
IMM
2B
P2 D
IMM
2A
P1 D
IMM
2A
P2 D
IMM
2B
P1 D
IMM
1B
P2 D
IMM
3A
P1 D
IMM
1A
P2 D
IMM
3B
CLEAR
VGA COM1
LAN2 LAN1 USB0/1
CMOS
I-SATA1
JPI2C (PWR I2C)
CPU1
CPU2
BIOS
T-SGPIO1I-SATA2
I-SATA3I-SATA4
I-SATA5I-SATA6
Intel ICH10R(South Bridge) Intel
5520 IOH-36D
Intel 82576 LAN CTRL
Winbond450RBMC
P1 D
IMM
3B
Front Panel CTRL
Battery
X8DTG-DF
J12
JPCIE1
JPCIE2
Jumper Description Default SettingJBT1 CMOS Clear Pins 1-2 (Reset)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 LAN1/2 Enable Pins 1-2 (Enabled)
J_UID_OW Red LED OW (Pins 7-8 of JF1) Off (Overwrites)
JWD1 Watch Dog Pins 1-2 (Reset)
Connector DescriptionCOM1 COM1 Serial Port
FAN 1-8 System/CPU Fan Headers
IPMB IPMB (SMB I2C) Header (for IPMI)
JF1 Front Panel Connector
JL1 Chassis Intrusion
JLPC80 JLPC80 Connector
JNMI1 NMI (Non-Maskable Interrupt) Header
JPSK1 Internal Speaker/Buzzer Header
JPW1 12V 20-pin Power Connector
JPW2/JPW3 12V 8-pin PCI-Exp. Power Connectors
LAN1/2 Gigabit Ethernet (RJ45) Ports
(IPMI dedicated) LAN LAN (RJ45) Port for IPMI 2.0
PCI-E Slot PCI-Express 2.0 x4 in x 16 slot (JPCIE3)
PWR I2C (JPI2C) Power SMB (System Management Bus) I2C Header
SATA1 ~ SATA6 (Intel South Bridge) SATA Ports
SBX 1A/2A Slots PCI-E slots GPU for (Graphics Processing Unit) support (J11/J12)
SBX 1B/2B Slots PCI-E slots for GPU support (JPCIE1/JPCIE2)
SW1
T-SGPIO-0/T-SGPIO-1 Serial General Purpose Input/Output Headers
USB0/1, USB 2/3 Universal Serial Bus (USB) Ports 0/1, 2/3
VGA Video Port
LED DescriptionLE1 Onboard Standby PWR warning LED Indicator
LE2 BMC LED Indicator
LE4Power Button
OH/Fan Fail/PWRFail/UID LED
1
Reset Button
2
HDD LED
Power LED
Reset
PWR
3.3V
FP UID Switch/3.3V SB
3.3V
Ground
Ground
1920
Blue_LED_Cathode(UID)/5V SB
Key
Ground
Key
NIC2 (Activity) LED
PWR Fail LED
NIC2 (Link) LED
NIC1(Link) LED NIC1 (Activity) LED
No Connection
Note: Notchshould align
with thereceptive point
on the slot
Notch
ReleaseTab
ReleaseTab
DIMM DDR3Notch
Memory Population for Optimal Performance-For a motherboard with One CPU (CPU1) installed
O Branch 0 Branch 1 Branch 2
3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A
6 DIMMs P1 DIMM1A P1 DIMM1B P1 DIMM2A P1 DIMM2B P1 DIMM3A P1 DIMM3B
Memory Population for Optimal Performance-For a motherboard with One CPU (CPU2) installed
Branch 0 Branch 1 Branch 2
3 DIMMs P2 DIMM1A P2 DIMM2A P2 DIMM3A
6 DIMMs P2 DIMM1A P2 DIMM1B P2 DIMM2A P2 DIMM2B P2 DIMM3A P2 DIMM3B
Memory Population for Optimal Performance-For a motherboard with Two CPUs installed
CPU1 CPU2
Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3
6 DIMMs 1A 2A 3A 1A 2A 3A
12 DIMMs
1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B
The X8DTG-DF supports up to 96 GB of Registered ECC or up to 24 GB of Unbuffered ECC/Non-ECC DDR3 1333/1066/800 MHz Memory in 12 DIMMs.
Note: With Unbuffered ECC/Non-ECC Memory, a maximum of 2 GB of memory is supported per DIMM slot.
3
12 4 5 6 7 8
1. USB 0
2. USB 1
3. IPMI_Dedicated LAN
4. LAN 1
5. LAN 2
6. COM Port 1 (Black)
7. VGA (Blue)
8. UID Switch
Insert the desired number of DIMMs into the memory slots, starting with P1 DIMM1A.
Screw#1
Screw#2
Screw#3
Screw#4
Mounting Hole
CPU Installation
CPU Keys
Socket Key
Pin 1
Rev. 1.00
