WET TOWEL DISPENSER

Contents1. Introduction2. Safety Warnings3. Other Warnings4. Installation5. Before usage6. Connection7. Operation8. Maintenance9. Malfunctioning10. Repair and Replace Spare Parts11. Specification12. Packing List

USER’SMANUAL

[ ]Read this manual thoroughly before installingand using the appliance.Keep for future consultation.This will ensure optimum performanceand safety.

INTRODUCTION

Product characteristics

• This product is an electric appliance which offers a one- off use wettowel, therefore do not use it for other purposes.

• Please read the Safety Warnings carefully before using the product.

• Hygienic: one- off soft towel avoids cross infection.

• Sterilized and disinfected: the dispenser is provided with dual disinfected functions withhigh temperatures and Ag++ which carries disinfectant.

• Practical and useful: towels can come out of the dispenser warm or cool and humidity andlength are adjustable. If the Auto Alarm is activated by lack of water or lack of wet towelroll the dispenser will stop working.

• Environment friendly: wet towels are made from natural fiber, which is spun in laces to cre-ate a paper which can be decomposed in the natural environment.

• Safe and dependable: It has been design to use 12V DC (direct current) safe voltage. Italso has a dual automatic protection for the heater, which assures the security of theappliance.

2

[ ]

SAFETY WARNINGS

Blackoutprohibited

Prohibition

Waterish handprohibited

Force

Moistenprohibited

• Only authorized technicians should repair or alter the machine, or else abnormalproblems may arise.

• Do not use an electrical outlet or adapter which exceeds rating voltage. Theappliance requires 110V- 240V AC (alternating current) or 12 V DC auto storagebattery. If the rating voltage is out of the above said range, the appliance couldcatch fire or malfunction may occur by heat.

• Do not touch the electrical outlet with wet hands or else you could receive an elec-tric shock or cause a short circuit.

• Please clear away the plug’s dust and dirt periodically as if it is full of dust or withhumidity, insulation can be damaged and catch fire. Pull out the pin and clean itwith a dry cloth.

• Do not moisten the machine or let it get wet, otherwise it could catch fire and youcould receive an electric shock or cause a short circuit.

• In the safety warnings, we use “WARNING” and “NOTE” to distinguish the degree ofdanger or damage. All of them are relevant for your safety, make sure you read them all.

Sample Picture

Warning

WARNING

FORCE

PROHIBITION

PROHIBITION

FORCE

• Be careful with the top cover otherwise you could get cut or injured, especiallydo not let children under 6 years old use the appliance alone.

• Please use special wet towel rolls, or else malfunction may occur. Please do notwash used wet towels on the wash machine because they can obstruct it.

• Please only put special wet towels in the appliance, or else malfunction may arise.

• Please pull out the plug if the dispenser is not used for a long time and releasethe remaining water in order to avoid contagious infections or receive an electricshock.

Prohibition

3

NOTE

Note Force

4

OTHER WARNIGSAvoid creepage

What is creepage? If the plug or electric device is inserted in the electric outlet and it’s left therepermanently, the two metal sheets of the front would create a slender elec-tric current due to humidity or dust. This could cause a fire which will leadinto a carbonization of the insulation and a reduction of the insulating capa-bility. Little by little more electric current would be produced: If the plug withthe creepage phenomenon is used a short circuit could occur and theappliance could catch fire.

Avoid creepagePlease pull out the plug from the electric outlet periodically and if the color has changed orany distortion happened, please refer it to professional technicians.Please clean the plug regularly to avoid the sediment of dust.Please keep the room fresh, especially in winter. A plug near the window may have highhumidity.Please draw the plug out from the electrical outlet if the appliance it’s not switched on.

For families with petsAvoid using the dispenser in the pet’s room.If you use the dispenser in the pet’s room, please pay attention to the behavior of the pet.Please make sure the plug has been pulled out from the electrical outlet when you go out. The petmay press the switch with its paw.

StoragePlease do not store it in dank places.Please do not store it in places where mouse could live.Mouse could bite the wire and cover the wire with excretions.That could cause a fire. And please do not store it in a place withvermin such as black beetles or else they may cause accidents or even fire.

Out of home Please pull out the power plug when you go out.

Use in autoWhen using the auto power, please pull out the Cigarette Lighter plug before the engine stops.Some car models still have power even if the engine is not operational. If the wire is still con-nected the battery could run out.

To avoid unusualsituations payattention when

storing it.

DustHumidity

Carbonization

[ ]

5

INSTALLATIONHow to open the door and topcover?

1. Press the button onthe door, and the doorwill open a little thenopen it with the hand.

2. Fasten a side of themachine and open thetop cover upward.

Axles

Wet Towel Roll

Top cover

Water tank

Door

Water receiving plate

Towelstateadjustingscrew

Doo

r bu

tton

On/ Offswitch

Heater switch

Adapter AC Wire

Nipper, for taking off wet towel rolls Brush, for cleaningspray pipe.

Cigarette Lighter Wire,connecting wet towel plug with

12V DC auto power.

Wet

Tow

el D

ispe

nser

ControlBoard

BEFORE USING ITIntroducing wet towel roll

1. Fix the axes into the wet towel roll:open up the packing and fix the 2 axes into wettowel roll.

2. Put wet towel roll inside: fix the axes on the appliance and introducethe wet towel roll.

3. Put a little towel under the press towelhandle: pull out a little towel and put it under thepress towel handle.

6

BEFORE USING ITFilling the tank

1. 1. Fill up with water:take out of the water tank, open the screw-on cap and fill it up with water. Please fillup with pure water. Fill it with pure waterto prevent water pollution, therefore themaintenance would be much easier.

2. Screw up the cap: screw the cap properlyor the plastic sealed ring could be left open and asa result the water tank could leak water.

3. Install water tank in the machine: put the water tank downwards in the machine.

4.Close top cover: close top cover carefully to avoidgetting harmed.

7

You can add a fewdrops of perfume

(which must bedissolved in water)to have wet towels

with aroma.

Lid

CONNECTIONUse indoor

1. Connect the AC Wire to the adapter

2. Connect the adapter with the jack on the back of Wet Towel Dispenser,pay attention when connecting the anode and cathode on the proper place.

3. Plug the power plug into an earthed power socket: after the connection theindicator light on the adapter will be on.

8

The back of WetTowel Dispenser

Jack

1

2

3

DC wire

Indicator light

Power plug

AC wire

PREVIO USOUse in auto (DC 12V)

1. Start up the auto engine

2. Connect the Cigarette Lighter with the jack on the back of Wet TowelDispenser, pay attention to connect the anode and cathode on the properplace.

3.Plug the Cigarette Lighter into the auto Cigarette Lighter socket.

• When using the auto power, please pull out the Cigarette Lighter plug before the enginestops working.• Some models of auto can not cut off the power even if the engine is not operational. If thewire is still connected the power accumulator could run out.

9

2

The back of WetTowel Dispenser

Jack

Cigarette Lighter socket in auto

Cigarette Lighter plug

1

3

OPERATIONHow to get wet towels? (Essential for use)

1.Press thepower button:display menu shows“00”. If the dispen-ser is on after thepower is off, it willbe on when thepower is switchedon. If the heater ison after power isoff, it will be on aswell as “Hot” light when power is switched on.

2. Press Getting button: press “Getting” (big switch), one press forone piece of towel. Press “Getting” constantly and set the amount oftowels you want, when the required amount is displayed, loosen the but-ton and the required pieces of towels will come out. It will stop workingif you press “Set” (small button) when the appliance is running. Whentaking several wet towels, the wet towel should be taken away promptly in order to avoidobstructing the device.

3. Press power button after using it.Nothing appears on the menu.

10

2

1

3

OPERATIONHow to get warm wet towels?

(Turn on the heater)

1. Press heaterswitch: when the “Hot” indicator light turns red,the heater starts to warm up. Indicatorlight will turn green when heating is finis-hed. In order to keep the wet towel warm,the dispenser will automatically repeat the process of heating and stop heating.

2. When “Hot” indicator light turns green, please press “Getting” button.The dispenser will release warm wet towels automatically.

Attention! If you use a new dispenser or is the first time you use it, press “Getting”“3-4” times to let the water spray out, then press heater switch to get warm towels.This way you will avoid breaking the heater.

How to add water and wet towel rolls?

• If there is lack of towel roll “Lack towel” light will be on displaying “E0” and the alarm willsound at the same time. Please put a new roll in the unit. (Page 6for reference).

• If there is lack of water “Lack water” light will be on, displaying“E1” and the alarm would sound at the same time. Please addwater in the water tank. (Page 7 for reference).

There is one Wet Towel Roll prepared when you purchase the dis-penser (gift box has additional 6 rolls). You can purchase WetTowel Rolls from the dealer where you bought the dispenser. (See address in page 15) or pur-chase the Wet Towel Rolls that fit in the dispenser if the rolls have already been used.

11

1

2

OPERATIONHow to adjust humidity? (Essential for use)

Press “Set” (small button) to adjust the humidityfrom the least humid “L1” to the most humid “L5”.Press “Set” for 4 seconds, it will show the currenthumidity, then press “Set” to choose the righthumidity from “L1” to “L5” and wait for a whiletill “00” appears, the setting is complete

• The setting is the state of that last time you haveinserted a function.

• If you press “Set” and the heater switch for 3seconds the top cover will open (no gettingtowels before). If “P1” is displayed it will start cle-aning itself. Stop pressing and cleaning will be over.

How to adjust the length of wet towel?

• Open top cover and take out water tank.• When adjusting the towel state adjust the screw clockwise and it will reduce the length of

wet towels. If you adjust it anticlockwise it will increase the length of wet towels.• Please control the length of wet towels in the range

of 17- 20 cm.

12

50 g/m2 Wet Towel Roll is suitable for this WetTowel Dispenser. It has been adjusted in the fac-tory, it is not necessary to adjust the towel’s length.If necessary it can be adjusted a little. Attention!Do not adjust the towel state by adjusting thescrew clockwise too tightly or Wet Towel Rollswould not come out.[ ] Short Long

MAINTENANCEWarning! When maintaining the machine, please make sure you pull out the plug or

Cigarette Lighter from the electric outlet or it may receive an electric shock orget damage.

Spray pipe

• Sometimes there are some substances accumulated in thespray pipe, therefore the sprayed out water is limited.Water tank could be filled up to its higher level howeverhumidity would not be enough. You will need to clean thespray pipe with a brush enclosed in the pack.

1.Draw out the plastic pipe from the spray pipe. (youare drawing it out fine if you are doing it from theleft side)

2. Draw the spray pipe from the left side.3. Clean the inside spray pipe with the brush enclo-

sed in the pack.4. Please reinstall the spray pipe correctly and con-

nect the plastic pipe.

• When restoring the water- receiving plate, please push the plate to the right position toinsert the sides in the groove.

Clean the water fromthe water- receiving plate

• Softly press the water- receiving plate towardsthe inside of the dispenser, it will pop up. Takethe water-receiving plate out of the dispenserand then clean up water in it.

Release remaining waterof the dispenser

• Put the dispenser near a container, spin thedraining screw out from the bottom of thedispenser to release the remaining water.

13

Whenreleasing hotwater, pleasepour it once

the water hasbeen cooled to

avoid gettingscalded.

Water that can not be absorbed will

be stored here. Draining screw

Spraypipe

Plastic pipe

Brush

Hole

Water outlet

MAINTENANCE

MALFUNCTION

14

Rolling device• In order to draw out the spray pipe, the

entire rolling device should be taken out.

Appliance cleaning• On general conditions, please use soft

towels to clean the external part of theappliance.

• If the machine is dirty, please use a towelto wash the machine,

• Please use disinfected alcohol to wash therolling device.

Cause and Approach

Draw out the wet towel and put it under the press towel handle.(Page 6 for reference).

The towel state screw has been screwed too tightly.Please take out wet towels from the rolling device with the enclosednipper and then leave the screw a little loose. (Page 12 for reference)

The water pipeline contains air.Remove the draining screw (let out about 50 ml of water), let theair out along with the water and then screw the bolt tightly.

Cut out the towel by the middle with scissors andthen take out the rolling device, impel the rollingstrap and take off the jammed towel, finally, putthe rolling device back in the inside of themachine.

Phenomena

The wet towel roll has notbeen installed correctly

Towels do not come out

Limited humidity

Towels do not come out,“E2” is displayedand the alarm is sounding.

Wet towel jammed

Rollingdevice

Rollingstrap

Do not use thinner/gasoline/era-dicator/coal oil etc, when maintai-ning the product as it could causedistortion, malfunction, change ofcolor, etc.

REPAIR AND REPLACE SPARE PARTS

SPECIFICATION

• Please request guarantee card from the distributor the day you purchase the dispenser andkeep it.

• Please contact the following address if you need to repair or replace the spare parts.

• If the product has exceeded guarantee date, please contact the following address for repai-ring but this service should be charged.

CAUTIONIf the product can not be used and need to be thrown away, please follow the local rules ofrubbish regulation.

MODEL RLR02-12B

VOLTAGE 100- 240V/50 Hz to DC 12V

VOLUME About 280x210x190 mm3

WEIGHT About 3.2 Kg

MAIN MATERIAL Machine: ABS plastic, stainless steel

Wet Towel Roll: plant fiber

MADE IN CHINA

15

PACKING LIST

16

Please confirm you have everyitem form the table bellow.

Contact the dealer is you lackany of the items.

- Wet Towel Dispenser- Nipper- Brush- Axes- Wet Towel Roll- Adapter- User’s Manual- Quality Certification- Guarantee Card- 6 rolls more for gift package

There are no special notes of smallchanges as the product design andfunctioning would be renewedconstantly.

Code

: VPR

AM

AD

II

<< Distributor’s stamp

<< Sello del distribuidor

<< Timbre du distributeur

<< Verteilersstempel

Model: Serial # :

WET TOWEL DISPENSER