MONTREUX FLOOR MOUNT CHANNEL B2 - Euroglass · 12 Ø32 10 or 12 Ø50. BALUSTRADE & POOL: MILANO...
Transcript of MONTREUX FLOOR MOUNT CHANNEL B2 - Euroglass · 12 Ø32 10 or 12 Ø50. BALUSTRADE & POOL: MILANO...
MONTREUX FLOOR MOUNT CHANNEL B2 - B3
GENOA FLOOR MOUNT CLAMP B4 - B5
LUGANO FACE FIX CLAMP B6 - B7
MONACO FLOOR MOUNT CLAMP B8 - B9
EUROANCHOR DISCS & SPACERS B10 - B17
MILANO EUROPOSTS B18 - B25
EUROBRACE & MINIPOSTS B26 - B27
HANDRAILS B28
BRACKETS & CLAMPS B29 - B30
VIENNA HYDRAULIC HINGE & LATCH B31 - B32
POOL GATE DOOR PIVOTS B33
BALUSTRADE & POOL:INDEX
catalogue effective 1st june 2015
B1
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MONTREUX
MontReuX Residential Floor Mount ChanneleDc
availaBle finisHes• Mill finish• Silver Pearl powdercoat • Selected powdercoat, lead time applies
tecHnical Details1.25m, 2.5m and 5m stock lengthsSupplied complete with clamping kits and cover platesVertical adjustment up to 15mmOut of plumb adjustment: +/- 50mm @ 1000mm high +/- 60mm @ 1200mm highM10 coach screw at 200mm centres fixing in timberM10 s/s epoxy bolts at 400mm centres fixing in concrete and steelClamping kits no greater than 400mm centresSupporting base channel is anotec powder-coated with 10yr warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassBased on barrier loads from AS/NZS1170.1Viridian 12mm toughened or 13.5mm toughened laminated safety glassVery high wind zone 1.76 kPa or lessMaximum heights above floor level are:
For Residential Occupancies A & C3 of Table 3.3 AS/NZS1170.1 1100mm from finish floor level1200mm with glass corners at the top connected by Euroglass balustrade clamps, or an interlinking handrail at 900mm to 1000mmEnd panels must be connected to the building by clamps or interlinking railSuitable for pool fencing protecting a fall of 1 metre or moreRefer to our website for further details
eDcenDEnd Cap
100mm
89mm
12mm25mm glass clearance
glass cut out Detail
R12.5
25mm
60mm
concrete fixing
B2
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MONTREUX
MontReuX Residential Floor Mount ChanneleDc
steel fixing
timber fixing
B3
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:GENOA
genoa Commercial Floor Mount ClampeYB
availaBle finisHes• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options:• Concrete fix• Steel fix
Suitable for 15mm toughened and 17.5mm laminated glassRecommended installation tools availableEnd caps availableGlass cut out required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass
Based on design loads from AS/NZS 1170.1 and a max. uls wind pressure of2.13 kPa (extra high wind zone), minimum glass thicknesses are:
For commercial occupancies B, E and C3 of Table 3.3 AS/NZS 1170.1:Up to 1100mm high balustrade measured from floor levelViridian ‘Balustrade 100’ 15mm toughened safety glass or 17.5mm laminated toughened glassRefer to our website for further details
glass notch
steel fixing
B4
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:GENOA
genoa Commercial Floor Mount ClampeYB
concrete fixing
single concrete fixing plate
B5
CALL: (09) 624-1180www.euroglass.co.nz
lugano Residential Face Fix Channelefc
availaBle finisHes• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options: • Concrete fix • Steel fix • Bolt through timber fix • Lag screw
Suitable for 12mm toughened and 13.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableNo glass cut outs or holes required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass
Based on barrier loads from AS/NZS 1170.1, Viridian 12mm ‘Balustrade 100’ toughened safety glass or 13.5mm toughened laminated safety glass, maximum height above the channel is:For Residential Occupancy A, B, C3 of Table 3.3 AS/NZS 1170.1 - Very high wind zone 1.76 kPa or less: 1200mm high with glass corners at top edge connected by Euroglass balustrade clamps or with an interlinking rail at 900mm to 1000mmEnd panels must be connected to the building by clamps or interlinking railExtra high wind zone 2.13 kPa or less: 1100mm high without balustrade corner clamps or interlinking railSuitable for pool fencing protecting a fall of one metre or moreRefer to our website for further details
BALUSTRADE & POOL:LUGANO
concrete fixing timber slatted deckbolt-through fixing
B6
CALL: (09) 624-1180www.euroglass.co.nz
lugano Residential Face Fix Channelefc
BALUSTRADE & POOL:LUGANO
600
timber slatted decklag screw fixing
6
timber enclosed decklag screw fixing
steel fixingexternal & internal
steel fixinginternal
B7
CALL: (09) 624-1180www.euroglass.co.nz
Monaco Commercial Face Fix Clampegl
availaBle finisHes• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
tecHnical Details1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options:• Concrete fix• Steel fix • Bolt through timber fix
Suitable for 15mm and 19mm toughened and 17.5mm and 21.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableGlass cut-out required10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass
Based on design loads from Table 3.3 of AS/NZS 1170.1 and a max. uls wind pressure of 3.0 kPa,minimum glass thicknesses and max balustrade heights measured from top of clamp are:
Occupancy B, E & C3‘Viridian Balustrade 100’ 15mm toughened safety glass or 17.5mm toughened laminated safety glass up to 1200mm
Occupancy C1/C2 & D:Viridian ‘Balustrade 100’ 15mm toughened safety glass up to 1100mm with corner connectors, orViridian ‘Balustrade 100’ 19mm toughened safety glass or 21.5mm laminated toughened glass up to 1200mm
Refer to our website for further details
BALUSTRADE & POOL:MONACO
B8
CALL: (09) 624-1180www.euroglass.co.nz
concrete fixing
glass notch
Monaco Commercial Face Fix Clampegl
BALUSTRADE & POOL:MONACO
timber slatted deck
steel fixing
B9
CALL: (09) 624-1180www.euroglass.co.nz
euBfsD50/51 Euroanchor 50mm stepped discEUBFSD50 includes 25mm thick spacer / EUBFSD51 includes 10mm thick spacer
availaBle finisHes• Satin anodised• Polished stainless steel • Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelAnodised to over 20 µmThe substrate material can be concrete, steel or timberIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm dia25mm spacer can be threaded M10 or 10.5mm through hole (specify upon order)Fixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass
euBfsQ Euroanchor 50mm square stepped disc
availaBle finisHes• Polished stainless steel • Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1 PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass
euBfcs Euroanchor 50mm countersunk stepped disc
availaBle finisHes• Polished stainless steel • Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber10mm and 25mm spacers available Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 22mm dia25mm spacer threaded M10M10 x 35 countersunk hex boltFixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass
euBfsQD Euroanchor rectangular stepped disc
availaBle finisHes• Polished stainless steel • Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timberDouble 25mm spacer 10.5mm through holeIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1PS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glass
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
B10
CALL: (09) 624-1180www.euroglass.co.nz
10
euRoancHoR Residential Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
For Residential ccupancies A, B, C3 of Table 3.3 AS/NZS 1170.1Based on 12mm Viridian ‘Balustrade 100’ toughened safety glass, maximum heights of glass above top anchors for residential occupancies A and C3 of Table 3.3 AS/NZS 1170.1 are: - Very high wind zone 1.76 kPa - 1100mm - High wind zone 1.36 kPa - 1200mm with corner connectors or interlinking handrail
Maximum distance from side edge of glass to fixings is 300mm for occupancy A and 200mm for occupancy C3 10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
concrete fixing
timber slatted deckbolt-through fixing
B11
CALL: (09) 624-1180www.euroglass.co.nz
euRoancHoR Residential Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
tapped fixing steelinternal only
steel fixing
B12
CALL: (09) 624-1180www.euroglass.co.nz
euRoancHoR Residential Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
timber lag screwinternal only
Weatherboard, angle spacerenclosed deck only
B13
CALL: (09) 624-1180www.euroglass.co.nz
euRoancHoR Residential Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
timber fix, cavity claddingenclosed deck
timber, lag screw fixingslatted deck
B14
CALL: (09) 624-1180www.euroglass.co.nz
euRoancHoR Commercial Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
For Commercial occupancies B, E, C3 of Table 3.3 AS/NZS 1170.1Based on 15mm Viridian ‘Balustrade 100’ toughened safety glass, maximum heights of glass above top anchors for commercial occupancies B, E, C3 of Table 3.3 AS/NZS 1170.1 are: - Extra high wind zone 2.13 kPa - 1200mm
10 year warrantyPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glass
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
concrete fixing
B15
CALL: (09) 624-1180www.euroglass.co.nz
euRoancHoR Commercial Balustrade SystemEUBFSD550/51 EUBFSQEUBFCSEUBFSQD
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
steel fixing
timber slatted deckbolt-through fixing
B16
CALL: (09) 624-1180www.euroglass.co.nz
sP5025t and sP5025 Spacers
availaBle finisHes• Satin anodised• Polished stainless steel • Satin stainless steel
tecHnical DetailsSP5025T - Threaded M10 holeSP5025 - 10.5mm dia. through hole
sPc5010 Countersunk disc or Spacer
availaBle finisHes• Polished stainless steel • Satin stainless steel
tecHnical DetailsDrilled and countersunkTo suit M10 countersunk hex bolt
sD50M10 Stepped disc
availaBle finisHes• Satin anodised• Polished stainless steel • Satin stainless steel
tecHnical DetailsM10 threaded blind hole
sP505WB Weatherboard shim
availaBle finisHes• Satin anodised• Polished stainless steel • Satin stainless steel
tecHnical Details8 degree angle12mm thick tapered to 5mm10.5mm dia. through hole
sPg3210/12 Gib spacers
availaBle finisHes• Plastic • Aluminium
tecHnical Details10mm thick plastic or aluminum12mm thick plastic or aluminium
BALUSTRADE & POOL:SPACERS & STEPPED DISCS
B17
CALL: (09) 624-1180www.euroglass.co.nz
25
Ø50
Ø50
10
Ø50
12
Ø32
10 or 12
Ø50
BALUSTRADE & POOL:MILANO EUROPOST RESIDENTIAL
Milano Post Semi-Frameless Residential Balustrade PostseRP availaBle finisHes• Silver Pearl powdercoat• Selected powdercoat
tecHnical DetailsBased on design loads from AS/NZS 1170.1 and a max uls wind pressure of 1.76 kPa (very high wind zone)Rated for Residential occupancy A and C3Suited for Viridian ‘Balustrade 100’ 10mm toughened safety glass or 11.5mm toughened laminate glassFixed at 1650mm centresMaximum height 1100mmMaximum glass overhang 500mmPS1 available on request for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details
eRPtTop FixedConcrete or steelSupplied complete with fixing to suit substrateFour fixings per postMinimum edge distance for fixings is 50mm
500mm max.
500mm max.
B18
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST RESIDENTIAL
Milano Post Semi-Frameless Residential Balustrade PostseRPfFace FixedConcrete, steel or bolt through timberMinimum edge distance for fixings is 60mmTwo fixings per post
eRPHConcealed Face FixedSteel or bolt through timberMinimum edge distance for fixings is 30mmTwo fixings per post
B19
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade PostsecPavailaBle finisHes• Silver Pearl powdercoat• Selected powdercoat
tecHnical Details
To suit Commercial occupancy B, E and C3Concrete or bolt through timberSuited for Virdian ‘Balustrade 100’ 10mm toughened safety glass or 11.5mm toughened laminated glassFixed at 1100mm centresMaximum height 1100mmMaximum glass overhang 500mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details
500mm max.
500mm max.
B20
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade PostsecPfcTo suit Commercial occupancy B, E and C3Face fixed to concrete substrate
ecPfBtTo suit Commercial occupancy B, E and C3Face fixed to timber substrate
B21
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade PostsecPtcTo suit Commercial occupancy B, E and C3Top fixed to concrete substrate
B22
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRavailaBle finisHes
Silver Pearl powdercoatSelected powdercoat, lead time applies
tecHnical Details
To suit Commercial occupancy C1, C2, D and C5Concrete, steel or bolt through timberTwo fixings per postSuited for Viridian ‘Balustrade 100’ 15mm toughened safety glass or 17.2mm toughened laminated glassFixed at 1100mm centresMaximum height 1100mmMaximum glass overhang 300mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer to our website for further details
300mm max.
B23
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRBtTo suit Commercial occupancy C1, C2, D and C5Face fixed to timber substrateSubstrate fixings are concealed
ecPRsTo suit Commercial occupancy C1, C2, D and C5Face fixed to steel substrateSubstrate fixings are concealed
B24
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MILANO EUROPOST COMMERCIAL
Milano Post Semi-Frameless Commercial Balustrade Posts (C5)ecPRcTo suit Commercial occupancy C1, C2, D and C5Face fixed to concrete substrateSubstrate fixings are concealed
B25
CALL: (09) 624-1180www.euroglass.co.nz
eB1 Eurobrace
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 40mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details
eB2 Eurobrace, square
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 32mmPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details
BALUSTRADE & POOL:EUROBRACE POSTS
B26
CALL: (09) 624-1180www.euroglass.co.nz
40 50
110
265
110
50
44
260
Glass Cut Out Detail
110
45
50
Ø26
Glass Cut Out Detail
110
45
50
Ø26
fMP250 Miniposts
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 12 and 15mm glassMini posts are set 85mm into concrete (Ø60mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter hole in glass45mm typical clearance from ground surfaceOptional Dress Ring or Cover Plate availablePS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details
fMP350 Miniposts
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsManufactured in 316 grade stainless steelSuitable for 12 and 15mm glass26mm diameter hole in glass45mm typical clearance from ground surfacePosts can be fastened to concrete or wooden surfaces using 2 x M10 bolts/screwsPS1 available for use with Viridian ‘Balustrade 100’ toughened safety glassRefer our website for further details
BALUSTRADE & POOL:MINI POSTS
B27
CALL: (09) 624-1180www.euroglass.co.nz
165
17
250
Ø50
Ø26
65
45
Glass Cut Out Detail
77
Ø26
45
Glass Cut Out Detail
FMP250RING 80mm outside dia.
51mm inside dia.
FMP250COVER 125mm outside dia.
51mm inside dia.(matches FMP350 cover)
50
187
Ø90 PCD4 holes
14
Ø125
BH1 Slimline handrail & end cap
availaBle finisHes• Mill finish• Silver Pearl powdercoat• Selected powdercoat (lead time applies)
tecHnical DetailsMeets AS1288-2006 for handrailing for glass balustrades that are over 1m in height and only fixed to the baseComplies with NZS4203:1992 for handrailsSuitable for 10mm and 12mm glass (specify when ordering)Can be used for both interior and exterior applicationsDesigned for easy fitting, clips directly over the glass: no welding required and can be installed after glass is fitted
euHB50 Handrail bracket
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical Details26mmØ hole in glass for EUHB50Supplied 150mm high for on-site trimming
euHB50sQ Handrail bracket, square
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical Details26mmØ hole in glassSupplied 150mm high for on-site trimming
euHBtf50 Handrail bracket timber fix
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsDesigned for timber fixingSupplied 150mm high for on-site trimming
euHBtf50sQ Handrail bracket timber fix, square
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsDesigned for timber fixingSupplied 150mm high for on-site trimming
BALUSTRADE & POOL:HANDRAILS
B28
CALL: (09) 624-1180www.euroglass.co.nz
BH2End Cap
22mm
30mm
Bci/BcWM/Bc90/Bc135 Balustrade clamps
availaBle finisHes• Polished stainless• Satin stainless
tecHnical DetailsSuitable for 12mm glass316 grade stainless steelSupplied with rubber gasket inserts
BB70/BB70sQ Balustrade brackets, wall mount
availaBle finisHes• Polished stainless• Satin stainless
tecHnical DetailsSuitable for 10 and 12mm glass316 grade stainless steelRound and square options
BBD70/BBD70sQ Balustrade brackets, glass/glass
availaBle finisHes• Polished stainless• Satin stainless
tecHnical DetailsSuitable for 10 and 12mm glass316 grade stainless steelRound and square options
BALUSTRADE & POOL:BRACKETS & CLAMPS
B29
CALL: (09) 624-1180www.euroglass.co.nz
BB70 BB70sQ
BBD70 BBD70sQ
33 20
Ø18 holein glass
45
��
�����
��
��
��
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� ��������
��������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
����
�������
���� ��������������������������
���� �������
�������������������������������������������������������������������������� ������������
��������������������������������������������������������������������������������������������
�������������������������������������������������������������������������
�������������������
�������� ��������
������������������������
���������
�������� ���
��� ������
��������
�����������
�������� ����
����������
����������� ������
������
�����
�����������
�����������������
�������
� �������
� �������
� ������ �� ������������ ���
�
�
�
�����������
�
�
�������������������������������������������������������
�������������������� �����
����������������������������� �����
������������������������������ �����
���������� ���
�����������������������������
������������������
���
��
��
��
���
��
���
���
���
��
���
���
���
�¡
��
��
���
���
���
��
���
���
��
��
���
��
���
����
��
��
�¡�����
��
��
���
��
¡�
��
��
��
�� ��
��
��
�����
�������
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� �������
�������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�����������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
��
��
��
��
�������
��� ����������
��
�����
��
��
��
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� ��������
��������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
����
�������
���� ����������
BciGlass-to-Glass
typical height
Bc9090˚ Corner
BcWMWall Mount
18
BALUSTRADE & POOL:CLAMPS
BcRD6/10, BcfD6/10, BcRs8/10, Bcfs8/10 Glass clamps, post or wall mount
availaBle finisHes• Polished stainless• Satin stainless
tecHnical DetailsOptions for 6, 8, 10 and 12mm glass316 grade stainless steelRound and square profilesFlat back for fixing to square section and wall mounting, or round back to suit 50mm tubular post
45
47
27
Gla
ss8-
10m
m
17
Code No. Item Number Finish
BCFS8PS 8752405 Polished
BCFS8SS 8752406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 8-10mm
8752405
45
49
27
17
Gla
ss8-
10m
m
Code No. Item Number Finish
BCRS8PS 8753405 Polished
BCRS8SS 8753406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 8-10mm
8753405
53
3824
14
Gla
ss6-
8mm
Code No. Item Number Finish
BCRD6PS 8751405 Polished
BCRD6SS 8751406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 6-8mm
8751405
49
38
24
14
Gla
ss6-
8mm
Code No. Item Number Finish
BCFD6PS 8750405 Polished
BCFD6SS 8750406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 6-8mm
8750405
38
53 49
45
49
45
47
54
38
65
54
60
55
60
65
5427
25
Gla
ss10
-12m
m
Code No. Item Number Finish
BCRD10PS 8755405 Polished
BCRD10SS 8755406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 10-12mm
8755405
60
5426
22
Gla
ss10
-12m
m
19
Code No. Item Number Finish
BCFD10PS 8754405 Polished
BCFD10PSS 8754406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 10-12mm
8754405
55
60
19
Gla
ss10
-12m
m
Code No. Item Number Finish
BCRS10PS 8757405 Polished
BCRS10SS 8757406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 02/02/2011
02/02/2011 Balustrade clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 10-12mm
8757405
55
56
31
17
Gla
ss10
-12m
m
Code No. Item Number Finish
BCFS10PS 8756405 Polished
BCFS10SS 8756406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 10-12mm
8756405
BcfD10 Flat back 10-12mm glassBcRD10 Round back 10-12mm glass
Bcfs8 Flat back 8-10mm glassBcRs8 Round back 8-10mm glass
Bcfs10 Flat back 10-12mm glassBcRs10 Round back 10-12mm glass
BcfD6 Flat back 6-8mm glassBcRD6 Round back 6-8mm glass
56
55
B30
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:VIENNA HYDRAULIC HINGES
eH1nHo Glass to wall hydraulic hinge
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical Details
Made from aluminium and stainless steel Hinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
eH1lnHo Glass to wall hydraulic hinge, offset
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical Details
Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
eH2nHo Glass to glass hydraulic hinge
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical Details
Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight; 70kgMaximum recommended door width; 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
B31
CALL: (09) 624-1180www.euroglass.co.nz
78
84
R 13
R 5
50
glass cut-out detail
563
120
909
24
11.5
HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE
This drawing remainsthe property of
Euroglass Systems Ltd
COPYRIGHT 2010
6
563
120
90
9
24
11.5
HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE
This drawing remainsthe property of
Euroglass Systems Ltd
COPYRIGHT 2010
11.55 63
45
120
90
BALUSTRADE & POOL:VIENNA POOL GATE LATCHES(Profile & finish to complement hydraulic hinge)
eHPl1 Gate latch and strike
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical DetailsDesigned for a frameless glass pool gate that closes to a post or wallSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
eHPl1RP Round Post Gate latch and strike
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical DetailsDesigned for a frameless glass pool gate 50mm dia. post mountSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
Made to order only
eHPl2 Gate latch and keeper
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical DetailsDesigned for a frameless glass pool gate and side panelSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
eHPl290 Gate latch and keeper
availaBle finisHes• Polished stainless steel, marine grade 316
tecHnical DetailsDesigned for a frameless glass pool gate that closes to a side panel at 90˚Single action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
B32
CALL: (09) 624-1180www.euroglass.co.nz
Ø12
Gate Panel
Ø12ø16 ø16
Glass Preparation
Glass Preparation
3333
66
5
105mm
Glass Preparation
50mm
Gate Panel
ø1666
33
150 min
Return/Post
8
Gate Panel
ø1666
33
150 min
Return/Post
5
100mm
100mm
38mm
50mm
38mm
100mm
150 min
Side ViewTop View
ø16
66
Glass Preparation
50mm
100mm
BALUSTRADE & POOL:PIVOTS
fPf790 Europool top pivot arm 90˚
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsDesigned for mounting a glass gate to a glass balustradeUsed in conjunction with HPT20/HPT10 top patch fittings that allows them to work as a top pivot setFrameless glass mountingManufactured in 316 stainless steel
HPt20Pg Top fitting to suit pool gate pivots
availaBle finisHes• Polished stainless steel• Satin stainless steel
tecHnical DetailsTop patch fitting suitable for Euroglass pool gate fittings: FPF5/FPF6/FPF7 and FPF790/FPF8Adjustable pivot insertFeatures concealing cover plates
B33
CALL: (09) 624-1180www.euroglass.co.nz
106mm
30mm
FPF790Lleft hand
91mm
167mm
30mm
FPF790Rright hand
167mm
91mm
106mm
161
148
6836 37
2055 R 80
31mm
166mm52mm
ASSSEMBLY (rh)
DOORRETURN PANEL