Monthly Notifications Register - IPQ...National Ref : SIST EN 1304:2014/oA101:2014 Title : Clay...
Transcript of Monthly Notifications Register - IPQ...National Ref : SIST EN 1304:2014/oA101:2014 Title : Clay...
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Register issued on : 2014-05-05
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector A : SERVICES
Register issued on : 2014-05-05
Page 3Subsector A03: POSTAL SERVICES
Subsector : A03 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 25901105/0001 Project EstablishedICS : 03.240National Ref : prPN-T-85007Title : Definitive stampsScope : This standard specifies technical requirements concerning definitive stamps, particularly
these which enable automatic letter sorting machines to recognize stamps. It provides formats of stamps, type and dimensions of perforation. It specifies requirements related to grammage of paper with glue coating and its form (sheet, roll) used to produce stamps. It provides requirements for paper relevant to whiteness, smoothness, fluorescence, water and ink absorptivity and breaking strength. It specifies all elements, which inscription consists of, its dimensions and technology of production. It provides tests procedure, methods and scope of acceptance control. It lists shortcomings causing discard of stamps before start of tests. It also provides a way of packing and marking definitive stamps
Relatedness :National : New
** End of Subsector **
Subsector A08: FUNERAL SERVICES
Subsector : A08 Registration Date : 2014-04-24Organization : UNMZCountry : Czech RepublicProject ID : 493160-1/0001 Draft for public enquiryICS :National Ref :Title : Coffins - Part 1: General and mechanical requirements and marking
Relatedness :National : New
Subsector : A08 Registration Date : 2014-04-24Organization : UNMZCountry : Czech RepublicProject ID : 493160-2/0001 Draft for public enquiryICS :National Ref :Title : Coffins - Part 2: Specific requirements for cremation coffins
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2014-04-30Organization : UNICountry : Italy
Page 4
Project ID : 8300A090/0001 Project EstablishedICS : 03.040National Ref : U8300A090Title : Non-regulated professions - Loss adjusters for all activities pertaining to surveys,
evaluation and/or settlement of damages arising from claims - Knowledge, skill and competence requirements
Scope : The aim of this codification activity is to define the qualifications necessary to the loss-adjustment profession, i.e. the professional activities of certification, estimation and/or settlement of damages carried out by experts. These qualifications, which are necessary for the aforementioned tasks and specific activities, are based on expertise, ability and competence, in accordance with the European Qualifications Framework (EQF) and are explained in such a way as to facilitate assessment procedures and provide recognition for learning outcomes. The code excludes: - Damage from traffic, fire and theft of vehicles and crafts; Note: subject to the rules outlined in Article X of the Insurance Code - Evaluation of physical and biological damage to persons.
Relatedness :National : New
Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst11921/0002 Project EstablishedICS : 03.080.30, 43.140National Ref :Title : Authorized services - Rules for motorcycleScope : This standard includes the rules of authorized services of motorcycles about structural
feature, management, technical equipment, properties of staff and certification.
Relatedness :National : New
Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst12870/0002 Project EstablishedICS : 03.080.30National Ref :Title : Competent services rules for compressorsScope : This standard includes rules for operating, structural feature, technical equipment,
personnel specifications and certification of competent services of compressors.
Relatedness :National : New
Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst93687/0001 Project EstablishedICS : 13.030.50
Page 5
National Ref :Title : Workplaces-Rules for tires of life completed recovery facilitiesScope : This standard includes rules for structural characteristics, operating, personal, technical
equipment and safety of tires of life completed recovery facilities
Relatedness :National : New
Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96257/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services rules for pneumatic machinesScope : This standard includes rules for operating, structural feature, technical equipment,
personnel specifications and certification of Authorized services of pneumatic machines.
Relatedness :National : New
Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96259/0001 Project EstablishedICS : 03.080.30, 43.150National Ref :Title : Authorized services - Rules for bicycleScope : This standard includes the rules of authorized services of bicycles about structural feature,
management, technical equipment, properties of staff and certification.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 6
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2014-05-05
Page 7Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2014-04-09Organization : ISSCountry : Serbia Latest Date for Comments : 2014-06-03Project ID : 00048565/0001 Draft for public enquiryICS : 13.220.10National Ref : SRPS Z.C4.051:2014Title : Hatchet for firefighters with protective coverScope : This standard applies to hatchet for firefighters, defined in clause 3, and their protective
cover . Hatchet for firefighters with protective cover is personal equipment for firefighters of the fire service
Relatedness :National : NewInternational : Identical to DIN 14924:2003
Subsector : B01 Registration Date : 2014-04-28Organization : BSI Draft Issue Date : 2014-04-22Country : United Kingdom Latest Date for Comments : 2014-06-30Project ID : 01201181/0001 Draft for public enquiryICS :National Ref : PD 7974-5Title : PD 7974-5. Application of fire safety engineering principles to the design of
buildings. Part 5. Fire and rescue service intervention (Sub-system 5)
Relatedness :National : New
Subsector : B01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 03100805/0001 Project EstablishedICS : 13.220.10National Ref : DIN 14555-12Title : Vehicles carrying tools and gears - Part 12: Hazardous material (HAZMAT) vehicle GW-
G
Relatedness :National : New
Subsector : B01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 03100952/0001 Project EstablishedICS :National Ref : 03100952Title : Ceiling hook
Relatedness :National : New
Subsector : B01 Registration Date : 2014-04-01
Page 8
Organization : AENORCountry : SpainProject ID : P0042871/0001 Project EstablishedICS :National Ref : PNE 23121Title : Installation and maintenance of fire blankets.Scope : This standard specifies the general requirements for the installation and maintenance of
fire blankets.
Relatedness :National : New
Subsector : B01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12250/0002 Project EstablishedICS : 13.220.20National Ref :Title : Evaluation guide for crash/fire/rescue services(Stanag 3929)Scope : The content of this standard is to standardize the methods used to evaluated the
effectivenes of military fire services
Relatedness :National : NewInternational : Modified STANAG 3929 ED6:2011
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2014-04-28Organization : BSI Draft Issue Date : 2014-04-23Country : United Kingdom Latest Date for Comments : 2014-06-23Project ID : 01400696/0001 Draft for public enquiryICS :National Ref : NA to BS EN 1991-1-7Title : NA to BS EN 1991-1-7. National Annex to BS EN 1991-1-7:2006+A1:2014. Eurocode
1: Actions on structures. Part 1-7. Accidental actions. Amendment
Relatedness :National : New
Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401053/0001 Project EstablishedICS :National Ref : NA to BS EN 1993-1-1:2005Title : UK National Annex to Eurocode 3. Design of steel structures General rules and
rules for buildings. NA to BS EN 1993-1-1. Amendment
Relatedness :National : New
Page 9
Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401065/0001 Project EstablishedICS :National Ref : BS 8002Title : Code of practice for earth retaining structures
Relatedness :National : New
Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401066/0001 Project EstablishedICS :National Ref : BS 8004Title : Code of practice for foundations (Formerly CP 2004)
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2014-04-17Organization : MSZTCountry : HungaryProject ID : 34810703/0001 Project EstablishedICS : 91.100, 91.100.30National Ref : MSZ 4798:2014Title : Concrete. Specification, performance, production, conformity, and rules of application of
MSZ EN 206 in Hungary
Relatedness :National : REV/AMD MSZ 4798-1:2004
Subsector : B03 (Secondary Subsector)
Registration Date : 2014-04-17
Organization : MSZTCountry : HungaryProject ID : 34810703/0001 Project EstablishedICS : 91.100, 91.100.30National Ref : MSZ 4798:2014Title : Concrete. Specification, performance, production, conformity, and rules of application of
MSZ EN 206 in Hungary
Relatedness :National : REV/AMD MSZ 4798-1:2004
Subsector : B03 Registration Date : 2014-04-01Organization : AENOR
Page 10
Country : SpainProject ID : P0042821/0001 Project EstablishedICS :National Ref : PNE 180201Title : Formwork. General Design, performance requirements and verificationsScope : This standard specifies performance requirements, (structural and general) design methods
and verifications for formworks. The requirements given are applicable to different types of formwork normally used in construction. In addition, requirements for special types are established. This standard does not apply to the specific requirements of those elements that can be incorporated into the formwork in production or work phase on construction sites and are established in other National or European standards.
Relatedness :National : New
Subsector : B03 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042834/0001 Project EstablishedICS :National Ref : PNE 83987Title : Concrete durability. Test methods. Measurement of chloride diffusion coefficient in
hardened concrete. Multiregime method.Scope : This draft standard revises the previous version updating some technical issues.
Relatedness :National : REV/AMD UNE 83987:2009
Subsector : B03 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042975/0001 Project EstablishedICS :National Ref : PNE 83607Title : Sprayed concrete. General recommendations.Scope : This standard updates the current version, taking into account the corresponding product
european standards, and providing general rules for the classification, intended uses, execution, transport etc of sprayed concrete
Relatedness :National : REV/AMD UNE 83607:1994 IN
** End of Subsector **
Subsector B07: GLASS
Subsector : B07 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12245/0001 Project EstablishedICS : 95.020National Ref :Title : Eye protection for the individual Soldier-Ballistic protection (Stanag 4296)
Page 11
Scope : This standard covers th general rules of the for the individual soldier ballistic protection.
Relatedness :National : NewInternational : Modified STANAG 4296 ED1:1997
** End of Subsector **
Subsector B10: TIMBER STRUCTURES
Subsector : B10 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00517125/0001 Project EstablishedICS :National Ref : 00517125Title : Application of construction products in structures - Part 6: Dowel-type fasteners and
connectors
Relatedness :National : New
** End of Subsector **
Subsector B12: MASONRY
Subsector : B12 Registration Date : 2014-04-11Organization : SIST Draft Issue Date : 2014-09-01Country : Slovenia Latest Date for Comments : 2014-07-11Project ID : 00005479/0001 Project EstablishedICS :National Ref : SIST EN 1304:2014/oA101:2014Title : Clay roofing tiles and fittings – Products definitions and specifications Scope : The document specifies levels of frost resistance and number of cycles applicable in
different countries.
Relatedness :National : New
** End of Subsector **
Subsector B14: GEOTECHNICS
Subsector : B14 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00517118/0001 Project EstablishedICS :National Ref : 00517118Title : Design of ground improvement - Jet grouting, deep mixing or grouting; Amendment 1
Relatedness :National : New
Subsector : B14 Registration Date : 2014-04-30Organization : MSZT
Page 12
Country : HungaryProject ID : 34812602/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-1:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 1: Determination
of water content (ISO/TS 17892-1:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-1:2006
Subsector : B14 (Secondary Subsector)
Registration Date : 2014-04-30
Organization : MSZTCountry : HungaryProject ID : 34812602/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-1:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 1: Determination
of water content (ISO/TS 17892-1:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-1:2006
Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812603/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-2:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 2: Determination
of density of fine-grained soil (ISO/TS 17892-2:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-2:2006
Subsector : B14 (Secondary Subsector)
Registration Date : 2014-04-30
Organization : MSZTCountry : HungaryProject ID : 34812603/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-2:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 2: Determination
of density of fine-grained soil (ISO/TS 17892-2:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-2:2006
Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812604/0001 Project Established
Page 13
ICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-3:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 3: Determination
of particle density. Pycnometer method (ISO/TS 17892-3:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-3:2006
Subsector : B14 (Secondary Subsector)
Registration Date : 2014-04-30
Organization : MSZTCountry : HungaryProject ID : 34812604/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-3:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 3: Determination
of particle density. Pycnometer method (ISO/TS 17892-3:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-3:2006
Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812605/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-4:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 4: Determination
of particle size distribution (ISO/TS 17892-4:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-4:2006
Subsector : B14 (Secondary Subsector)
Registration Date : 2014-04-30
Organization : MSZTCountry : HungaryProject ID : 34812605/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-4:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 4: Determination
of particle size distribution (ISO/TS 17892-4:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-4:2006
Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812606/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-12:2014
Page 14
Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-12:2006
Subsector : B14 (Secondary Subsector)
Registration Date : 2014-04-30
Organization : MSZTCountry : HungaryProject ID : 34812606/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-12:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 12: Determination
of Atterberg limits (ISO/TS 17892-12:2004)
Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-12:2006
** End of Subsector **
Subsector B15: SANITARY APPLIANCES
Subsector : B15 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042820/0001 Project EstablishedICS :National Ref : PNE 67001Title : Ceramic sanitary ware. Technical specificationsScope : This standard establishes the test methods and requirements of ceramics sanitary
appliances under no harmonized standard for use in sanitary rooms, kitchens and laundry rooms. It updates the current edition (2008).
Relatedness :National : REV/AMD UNE 67001:2008
** End of Subsector **
Subsector B18: SCAFFOLDING
Subsector : B18 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst11508/0001 Project EstablishedICS : 53.020.01National Ref :Title : Materials handling equipmentScope : This standard covers the properties of materials handling equipment.
Relatedness :National : NewInternational : Modified STANAG 2829 ED4:2011
** End of Subsector **
Page 15Subsector B19: CERAMIC TILES
Subsector : B19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042865/0001 Project EstablishedICS :National Ref : PNE 136021Title : Finit Element Calculation Method for the determination of the thermal transmittance of
masonry built from clay masonry units.Scope : It establishes the finit element calculation method for the determination of the thermal
transmittance of masonry built from clay masonry units.
Relatedness :National : New
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT
Subsector : B20 Registration Date : 2014-04-08Organization : NBN Draft Issue Date : 2014-04-08Country : Belgium Latest Date for Comments : 2014-09-07Project ID : BE059587/0001 Draft for public enquiryICS : 93.030National Ref : NBN B 34-001, ed 1Title : Investigation and assessment of drain and sewer systems outside buildings - Visual
inspection coding system - National supplement to NBN EN 13508-2+A1:2011
Relatedness :National : NewEuropean : Not Equivalent to EN 13508-2+A1:2011
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001882/0001 Project EstablishedICS : 93.030National Ref : NEN 7067:2014 nlTitle : Gullies - Definition, nominal dimensions (functional) requirements and test methodsScope : NEN 7067 gives definitions and general requirements for gullies as well as the basis for
additional requirements with regard to material and product in specific product standards. This standard applies to street gullies, pavement gullies and combined street-pavement gullies irrespective of the materials used. The standard is meant to be applied in combination with the specific standards.
Relatedness :National : New
Subsector : B26 Registration Date : 2014-04-17Organization : SNV Draft Issue Date : 2014-04-17Country : Switzerland Latest Date for Comments : 2014-05-22
Page 16
Project ID : CH140008/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640580Title : Unbound foundation layers; Design and requirements for the built-in layers
Relatedness :National : REV/AMD SN 640580 (2002)
** End of Subsector **
Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst00799/0001 Project EstablishedICS : 91.140.70National Ref :Title : Squatting WC-Bowls (Made of Ceramic and Cast Iron)Scope : This standard specifies the classification, proporties, sampling, testing and marking of
ceramic and cast iron sguatiting WC-bowls.
Relatedness :National : New
** End of Subsector **
Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to NEN 2990:2012
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
Page 17
Scope : industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to NEN 2991:2012
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to NEN 5896:2003
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to SC 510:2011
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
industry, the hazards and the negative effects on human health and caused diseases of
Page 18
Scope : asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to SC 530:2011
Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in
industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.
Relatedness :National : NewEuropean : Not Equivalent to SC 540:2007
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026117/0001 Project EstablishedICS : 03.100.01National Ref : ÖNORM A 2063Title : Exchange of data concerning service description, tender, offer, works contract and final
settlement in electronic formScope : This Austrian Standard regulates the development of data which is exchanged automatically
between all stakeholders, such as LB editors, EC-Publisher, designers, clients, bidders or contractors in tender phases, contracting and billing (AVA). The following areas are covered: service description, element catalogue, specifications, accounting.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 19
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2014-05-05
Page 20Subsector C01: Food products
Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 00001100/0001 Project EstablishedICS :National Ref : SM 1100Title : Importation, processing and storage of flour - RequirementsScope : Standardization for the importation, processing and storage of flour.
Relatedness :National : New
Subsector : C01 (Secondary Subsector)
Registration Date : 2014-04-24
Organization : MCCAACountry : MaltaProject ID : 00001100/0001 Project EstablishedICS :National Ref : SM 1100Title : Importation, processing and storage of flour - RequirementsScope : Standardization for the importation, processing and storage of flour.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-23Organization : MCCAACountry : MaltaProject ID : 00003200/0001 Project EstablishedICS : 03.080.99, 03.080.99National Ref : SM 3200Title : Cash and Valuables-In-Transit ServicesScope : Standardization for Cash and Valuables-In-Transit Services
Relatedness :National : New
Subsector : C01 (Secondary Subsector)
Registration Date : 2014-04-23
Organization : MCCAACountry : MaltaProject ID : 00003200/0001 Project EstablishedICS : 03.080.99, 03.080.99National Ref : SM 3200Title : Cash and Valuables-In-Transit ServicesScope : Standardization for Cash and Valuables-In-Transit Services
Relatedness :National : New
Page 21
Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 00005100/0001 Project EstablishedICS :National Ref : SM 5100Title : Photo-voltaic Installations - Requirements for safety installationsScope : Standardization for the safety installations of Photovoltaic panels
Relatedness :National : New
Subsector : C01 (Secondary Subsector)
Registration Date : 2014-04-24
Organization : MCCAACountry : MaltaProject ID : 00005100/0001 Project EstablishedICS :National Ref : SM 5100Title : Photo-voltaic Installations - Requirements for safety installationsScope : Standardization for the safety installations of Photovoltaic panels
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 006000-1/0001 Project EstablishedICS : 97.220.01, 97.220.01National Ref : SM 6000-1Title : Combat Sport – General Requirements for BoxingScope : Standardization of coaching and competition/exhibition-staging facilities and the operation
thereof in respect of combat sports (boxing) practised by minors.
Relatedness :National : New
Subsector : C01 (Secondary Subsector)
Registration Date : 2014-04-24
Organization : MCCAACountry : MaltaProject ID : 006000-1/0001 Project EstablishedICS : 97.220.01, 97.220.01National Ref : SM 6000-1Title : Combat Sport – General Requirements for BoxingScope : Standardization of coaching and competition/exhibition-staging facilities and the operation
thereof in respect of combat sports (boxing) practised by minors.
Relatedness :National : New
Page 22
Subsector : C01 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042777/0001 Project EstablishedICS :National Ref : PNE 34803Title : Spices and condiments. Determination by spectrophotometry of safranal from saffron
stigmata(Crocus sativus L.)Scope : This UNE standard describes a method for the determination of safranl in saffron by means
of a measurement of the absorbance with a spectrophotometre.
Relatedness :National : REV/AMD UNE 34803:2011
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : t1000311/0001 Project EstablishedICS : 67.200.20National Ref :Title : Sesame seedScope : This standard includes sesame seed. It does not apply to certificated sesame seed kept for
sowing and also physically or chemically processed sesame seeds
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1001469/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Artichokes Scope : This standard applies to canned artichokes
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1001864/0001 Project EstablishedICS : 67.100.10National Ref :Title : Cream and kaymakScope : This standard specifies the cream which is defined in caluse 0.2.1. It does not cover Afyon
kaymak and foam
Relatedness :National : New
Page 23
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002666/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Fried Green PeppersScope : This standard applies to canned fried green peppers which is defined in caluse 0.2.1.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002667/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Stuffed Green Peppers (With Vegetable Oil)Scope : This standard applies to cenned stuffed green peppers (with vegetable oil).
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002668/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Stuffed Eggplant With Vegetable OilScope : This standard applies to canned stuffed eggplant with vegetable oil.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : t1003411/0001 Project EstablishedICS : 67.080.10National Ref :Title : Seedless raisin Scope : This standard applies to seedless raisins. It does not apply other raisins which their seeds are
mechanically taken and also do not apply to blackberries.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSE
Page 24
Country : TurkeyProject ID : t1003984/0001 Project EstablishedICS : 67.160.20National Ref :Title : Strawberry NectarScope : This standard comprise strawberry nectar.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1003985/0001 Project EstablishedICS : 67.160.20National Ref :Title : Plum NectarScope : This standard comprise plum nectar.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007360/0001 Project EstablishedICS : 67.080.01National Ref :Title : Fruits, Vegetables and Derived Products-Qualitative Method for the Detection of Sulphur
Dioxide Scope : This standard the method is applicable to products having contents of 2 mg or more per
kilogram. It consists in acidification of a test portion and decolourizing by the liberated gas of a starch indicator paper previously coloured blue by a trace of iodine vapour.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007573/0001 Project EstablishedICS : 67.080.01National Ref :Title : Fruits, Vegetables and Derived Products-Determination of Zinc Content-Atomic
Absorption Spectrometric Method Scope : This standard covers the method consists is decomposing of organic matter by a dry or wet
method and determing of the Zn+ cation by a suitable spectrometer. For some liquid samples the determination may be carried out directly, without previous decomposition.
Relatedness :National : New
Page 25
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007897/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Mixed Vegetables With Vegetable OilScope : This standard applies to canned mixed vegetables with vegetable oil.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007898/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Imambayıldı (Stewed Egg-Plant) With Vegetable Oil-Ready to serveScope : This standard applies to canned imambayıldı (stewed egg-plant) with vegetable oil which is
ready to serve
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1010582/0001 Project EstablishedICS : 67.180.20National Ref :Title : Gullac- Special Turkish sweetScope : This standard applies to güllaç
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1010938/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut PureeScope : This standard covers the hazelnut puree
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSE
Page 26
Country : TurkeyProject ID : t1011345/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned-Potatoes With Meat-Ready to ServeScope : This Standard covers the canned potatoes with meat which is ready to serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012383/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned TomatoesScope : This standard applies to Canned tomatoes
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012395/0001 Project EstablishedICS : 67.160.20National Ref :Title : Pineapple Nectar
Scope : This standard comprise pineapple nectar.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012480/0001 Project EstablishedICS : 67.160.20National Ref :Title : Raspberry NectarScope : This standard comprise raspberry nectar.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012914/0001 Project Established
Page 27
ICS : 67.160.20National Ref :Title : Pear NectarScope : This standard comprise pear nectar.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013358/0001 Project EstablishedICS : 67.100.30National Ref :Title : Lor cheeseScope : This standard specified lor cheese.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013384/0001 Project EstablishedICS : 67.100.99National Ref :Title : Special Turkish Sweets (prepared by adding milk) Ready to serve-powderScope : This standard contains Special Turkish Sweets (prepared by adding milk) Ready to serve-
powder . It does not contain Special Turkish Sweets ready to eat.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013568/0001 Project EstablishedICS : 67.160.20National Ref :Title : BeveragesScope : This standard specifies beverages.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2002284/0001 Project EstablishedICS : 67.060National Ref :
Page 28
Title : Boiled and pounded wheatScope : This standard covers boiled and pounded wheat
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2002590/0001 Project EstablishedICS : 67.180.10National Ref :Title : Tahini HalvaScope : This standard covers tahini halvah (Special Turkish Delight)
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2010937/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut MealScope : This standard covers the hazelnut meal.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2012929/0001 Project EstablishedICS : 67.140.10National Ref :Title : Black tea in fusion bagScope : This standard specifies black tea in infusion bag, produced to be used in cup, tea pot, etc.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t3001620/0001 Project EstablishedICS : 67.060National Ref :Title : MakaroniScope : This standard covers macaroni.
Relatedness :
Page 29
National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t3004500/0001 Project EstablishedICS : 67.060National Ref :Title : Wheat Flour Scope :
This standard specifies by indivicually wheat floor which is prepared or mixing of triticum aestivum, triticum compactum and tritium drum wheat.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t4012691/0001 Project EstablishedICS : 67.140.10National Ref :Title : Green TeaScope : This standard specifies the green tea.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst01814/0001 Project EstablishedICS : 67.080.20National Ref :Title : DillScope : This standard applies to dill described in clause 0.2 and to be supplied to the consumer as
fresh.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06160/0001 Project EstablishedICS : 67.120.10National Ref :Title : Meat-Rules for Refrigerating, Freezing, Storage Transporting and ThawingScope : This standard applies to the rules conserning to cold air systems, precooling, cooling,
freezing and storage in chilled or frozen forms, transportation, tawing of red meats. It does not apply to the rules concerning to, red meat products.
Page 30
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst09984/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds-Concentrated Fattening Cattle FeedScope : This standard applies to concentrated fattening catte feeds. It does not apply to the other
kind of concentrated feeds.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst10053/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Milk Feeds for Dairy CowsScope : This standard applies to feeds used for dairy cows. It does not apply to the other kind of
cattle feeds and milk feeds.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10435/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds-Goad Kid FeedScope : This standard applies to goat kid feeds. It does not apply to the other kind of goat feeds.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst10746/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Concentrated Dairy Cattle FeedScope : This standard applies to concenrated dairy cattle feeds. It does not apply to the other kind
of concentrated feeds.
Page 31
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst10749/0001 Project EstablishedICS : 65.060.50National Ref :Title : Agricultural Machinery - Pick - Up Straw MachineScope : This standard applies to straw stalks pick-up machines starting by a tractor tail pin, pick up
the stalks, cutting stalks to the straw, loading straws to tractor by obligatory air current.
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst11107/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Pregnant Sheep FeedScope : This standard applies to compound feeds of pregnant sheep. It Does not apply to the other
type of compound feeds manifactured for sheep
Relatedness :National : New
Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst11108/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Pregnant Cow FeedScope : This standard applies to Compound feeds of Pregnant compound feeds manifactured For
Cows
Relatedness :National : New
** End of Subsector **
Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042776/0001 Project EstablishedICS :
Page 32
National Ref : PNE 48103Title : Paints and varnishes. Standardized colours.Scope : This standard selects a collection of standard colors for uniformuly coloured, hiding, non-
metallized and non-louminous paints.
Relatedness :National : REV/AMD UNE 48103:2002
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0042595/0002 Draft for public enquiryICS :National Ref : PNE 84105Title : Cosmetic raw materials. Sunscreens. 2-Hydroxy-4-methoxybenzophenone-5-sulfonic
acid (Sulisobenzone).Scope : This standard determines the specifications required by the 2-Hydroxy-4-
methoxybenzophenone-5-sulfonic acid.
Relatedness :National : REV/AMD UNE 84105:2007
** End of Subsector **
Subsector C11: TOBACCO
Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00042964/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P2.009/1Title : Reconstituted tobacco - folio of tobacco – Specification and test methods – Amendment
1Scope : This amendment relates to the standard SRPS E.P2.009:2004, clause 5.
Relatedness :National : New
Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00047844/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P1.113/1Title : Unfermented tobacco in leaf – Burley type of tobacco – Specification – Amendment 1Scope : This amendment relates to the standard SRPS E.P1.113:2004, clauses 4.3, 4.3.1, 4.4.1 and 4.6.
Relatedness :National : New
Page 33
Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00047848/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P1.114/1Title : Unfermented tobacco in leaf – Virginia type of tobacco – Specification – Amendment 1Scope : This amendment relates to the standard SRPS E.P1.113:2004, clauses 4.4.1 and 4.6. of the.
Relatedness :National : New
** End of Subsector **
Subsector C20: EXPLOSIVES AND FIREWORKS
Subsector : C20 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst02788/0001 Project EstablishedICS : 71.100.30National Ref :Title : Trinitrotoluene (TNT)Scope : This standard covers the trinitrotoluene (TNT) used for producing the explosive matter and
ammunition.
Relatedness :National : New
Subsector : C20 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst02870/0001 Project EstablishedICS : 71.100.30National Ref :Title : Black PowderScope : This standard covers the black powder for military use.
Relatedness :National : NewInternational : Modified MIL-P-223 B(3)NOT2:1991
** End of Subsector **
Subsector C21: COSMETICS
Subsector : C21 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0039819/0002 Draft for public enquiryICS :National Ref : PNE 84686Title : Cosmetic raw materials. Sunscreens. 3-(4-Methylbenzylidene) camphor.Scope : This standard includes the specifications required by the 3-(4-Methylbenzylidene) camphor
, in cosmetic uses.
Page 34
Relatedness :National : REV/AMD UNE 84686:2005
Subsector : C21 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0039821/0002 Draft for public enquiryICS :National Ref : PNE 84687Title : Cosmetic raw materials. Sunscreens. 3,3,5-Trimethylcyclohexyl salicylate (Homosalate).Scope : This standard includes the specifications required by the 3.3.5-Trimethylcyclohexyl
salicylate (Homosalate), in cosmetic uses.
Relatedness :National : REV/AMD UNE 84687:2005
** End of Subsector **
** End of Sector **
Information procedure Page 35
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2014-05-05
Page 36Subsector F07: DOCUMENTATION AND INFORMATION
Subsector : F07 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00900104/0001 Project EstablishedICS :National Ref : 00900104Title : Basic requirements for the planning and design of archive and library buildings
Relatedness :National : New
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL
Subsector : F15 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst04770/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test methods for electrical and electronic component parts for military purpose, -Test
method for measuring insulation resistanceScope : This standard covers the test method for moisture resistance resistance of electrical and
electronic component parts for military purpose.
Relatedness :National : NewInternational : Modified MIL-STD-202 G (2):2013
Subsector : F15 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst05313/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test methods for electrical and electronic componenets and parts for military purpose -
Test method for capacitanceScope : This standard covers the test method for measuring capacitance of electrical and electronic
components and parts for military purpose.
Relatedness :National : NewInternational : Modified MIL-STD-202 G (2):2013
** End of Subsector **
Subsector F19: OPTICS
Subsector : F19 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 02702676/0001 Project EstablishedICS : 37.020National Ref : DIN 58756-1
Page 37
Title : Production in optical engineering - Small lenses - Carriages and supporting mounts
Relatedness :National : New
** End of Subsector **
Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK
Subsector : F21 Registration Date : 2014-04-01Organization : MSZTCountry : HungaryProject ID : 03482581/0001 Project EstablishedICS :National Ref : MSZ 13073:2014 Kockázatkezelés. SzakszótárTitle : Risk management. Vocabulary
Relatedness :National : REV/AMD MSZ 13073:2014
Subsector : F21 (Secondary Subsector)
Registration Date : 2014-04-01
Organization : MSZTCountry : HungaryProject ID : 03482581/0001 Project EstablishedICS :National Ref : MSZ 13073:2014 Kockázatkezelés. SzakszótárTitle : Risk management. Vocabulary
Relatedness :National : REV/AMD MSZ 13073:2014
** End of Subsector **
Subsector F99: UNDETERMINED
Subsector : F99 Registration Date : 2014-04-28Organization : SIS Draft Issue Date : 2014-04-25Country : Sweden Latest Date for Comments : 2014-06-25Project ID : 00626000/0001 Project EstablishedICS :National Ref : 626000Title : Spill safetyScope : Spill Safety is a standard, addressing methods and technical solutions in order to prevent,
limit and take care of oil- and chemical spillage during accident or daily operation - from smallscale, industrial leakage to large maritime accidents. The readiness for spill includes both stationary and mobile workplaces, as well as transports - both ashore and at sea
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 38
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2014-05-05
Page 39Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)
Subsector : H33 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042981/0001 Project EstablishedICS :National Ref : PNE 59537Title : Footwear. Test methods for soles, heels and rigid platforms. Fatigue resistance.Scope : This standard establishes a method for determining the fatigue resistance of rigid
components in the lower parts of footwear (heels, platforms, etc.).
Relatedness :National : REV/AMD UNE 59537:2007
Subsector : H33 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042982/0001 Project EstablishedICS :National Ref : PNE 59536Title : Footwear. Test methods for soles. Compression fatigue resistance of cellular materials.Scope : This standard establishes a procedure for performing the compression fatigue test
Templating cellular polymer material or sheet material for this application.
Relatedness :National : REV/AMD UNE 59536:2007
** End of Subsector **
** End of Sector **
Information procedure Page 40
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector I : MECHANICAL ENGINEERING
Register issued on : 2014-05-05
Page 41Subsector I02: FASTENERS
Subsector : I02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01400944/0001 Project EstablishedICS :National Ref : BS 3643-2:2007 CorrigendumTitle : ISO metric screw threads. Part 2: Specification for selected limits of size.
Corrigendum
Relatedness :National : New
Subsector : I02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06702100/0001 Project EstablishedICS :National Ref : 06702100Title : Stud bolts - Part 2: Metric interference thread MFS
Relatedness :National : New
Subsector : I02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06702101/0001 Project EstablishedICS :National Ref : 06702101Title : Stud bolts - Part 1: Metric thread
Relatedness :National : New
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01704/0001 Project EstablishedICS : 21.060.10National Ref :Title : Bolts For Watthour MetersScope : This standard covers metric bolts for watthour meters to fisc covers, stampable with lead.
Relatedness :National : NewEuropean : Modified DIN 43854:1979
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01704/0001 Project Established
Page 42
ICS : 21.060.10National Ref :Title : Bolts For Watthour MetersScope : This standard covers metric bolts for watthour meters to fisc covers, stampable with lead.
Relatedness :National : NewInternational : Modified ISO 17672:2010
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01993/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fixing Bolts With Metric Thread for Electric MetersScope : This standard covers metric bolts and their nuts for electric watthour meters
Relatedness :National : NewEuropean : Modified DIN 267-2:1984
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01993/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fixing Bolts With Metric Thread for Electric MetersScope : This standard covers metric bolts and their nuts for electric watthour meters
Relatedness :National : NewEuropean : Modified DIN 46300:1980
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01993/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fixing Bolts With Metric Thread for Electric MetersScope : This standard covers metric bolts and their nuts for electric watthour meters
Relatedness :National : NewInternational : Modified ISO/TR 4026:2003
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric Thread
Page 43
Scope : This standard covers tommy screws with clamping bolts, with metric thread.
Relatedness :National : NewEuropean : Modified DIN 267-3:1967
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric ThreadScope : This standard covers tommy screws with clamping bolts, with metric thread.
Relatedness :National : NewEuropean : Modified DIN 6304:2002
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric ThreadScope : This standard covers tommy screws with clamping bolts, with metric thread.
Relatedness :National : NewEuropean : Modified DIN 6306:2002
Subsector : I02 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02339/0001 Project EstablishedICS : 21.060.50National Ref :Title : Split pinsScope : This standard, covers defination, classification, sampling, requirements, inspention, testing
and delivering to market of split pins
Relatedness :National : NewEuropean : Modified DIN 4000-163:2009
Subsector : I02 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02339/0001 Project EstablishedICS : 21.060.50National Ref :Title : Split pinsScope : This standard, covers defination, classification, sampling, requirements, inspention, testing
and delivering to market of split pins
Page 44
Relatedness :National : NewEuropean : Modified DIN 48063-1:1978
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
equipment.
Relatedness :National : NewEuropean : Modified DIN 11014:1969
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
equipment.
Relatedness :National : NewEuropean : Modified DIN 267-1:1967
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
equipment.
Relatedness :National : NewEuropean : Modified DIN 76-1:2004
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
Page 45
Scope : equipment.
Relatedness :National : NewEuropean : Modified DIN 78:2013
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
equipment.
Relatedness :National : NewInternational : Modified ISO 4753:2011
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural
equipment.
Relatedness :National : NewInternational : Modified ISO 898-1:2013
Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst079-4/0001 Project EstablishedICS : 21.060.30National Ref :Title : Washers-Part 4:Tab washersScope : This standard specifies defination, classification requirements, sampling, testing and
packaging for tap washers
Relatedness :National : NewEuropean : Modified DIN 462:1973
** End of Subsector **
Subsector I08: AGRICULTURAL MACHINES
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst04891/0001 Project Established
Page 46
ICS : 65.060.20National Ref :Title : Sugar Beet HarvestersScope : This standard applies to sugar beet harvesters.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst05243/0001 Project EstablishedICS : 65.060.40National Ref :Title : Agricultural Machinery - Garden Sprayers With EngineScope : This standard, covers garden sprayers with engine. It doesnt cover engine driven portable
atomizers and self propelled engine sprayers
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05295/0001 Project EstablishedICS : 65.060.20National Ref :Title : Disc-HarrowsScope : This standard applies to disc-harrows for seed bed preparation.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05296/0001 Project EstablishedICS : 65.060.20National Ref :Title : Goble-DiscsScope : This standard applies to goble-discs for seed bed preparation stuble mulch operation
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05690/0001 Project EstablishedICS : 65.060.30National Ref :
Page 47
Title : Seed Drills for Sowing In Lines (Tractor Drawn)Scope : This standard applies to tractor drawn seed drills for sowing in lines.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst06426/0001 Project EstablishedICS : 65.060.20National Ref :Title : Hoeing Machines for TractorScope : This standard applies to tractor drawn hoeing machines. It doesn't apply to horse drawn,
engine powered, hand operated and tractor drawn rotary hoeing machines.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst06428/0001 Project EstablishedICS : 65.060.50National Ref :Title : Potato HarvestersScope : This standard applies to self propelled, tractor drawn and tractor mounted potato
harvesters.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst06736/0001 Project EstablishedICS : 65.060.20National Ref :Title : Rotary Hoeing Machines for TractorsScope : This standard applies to rotary hoeing machines for tractors. It doesn't apply engine
powered hand operated rotary hoeing machines.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst11216/0001 Project EstablishedICS : 65.060.50National Ref :
Page 48
Title : Agricultural Machinery-Knife Type MowersScope : This standard applies to knife type mowers.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst11943/0001 Project EstablishedICS : 65.060.50National Ref :Title : Agricultural-Machinery-Flail MulcherScope : This standard applies to flail mulcher machines pulled by tractors. It does not apply to the
machines cut plant parts under the soil cutter for fresh feed hay chopper silage and stone grimder and also stalk cutter works in vertical position.
Relatedness :National : New
Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst95300/0001 Project EstablishedICS : 65.060.20National Ref :Title : Ploughs used for agricultural machineryScope : This standard applies to ploughs used with agricultural tractors
Relatedness :National : New
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102475/0001 Project EstablishedICS :National Ref : 12102475Title : Cold-forming taps - Technical delivery conditions for high-speed steel cold-forming taps
Relatedness :National : New
Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102476/0001 Project EstablishedICS :
Page 49
National Ref : 12102476Title : Cold-forming taps - Technical delivery conditions for carbide cold-forming taps
Relatedness :National : New
Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102479/0001 Project EstablishedICS :National Ref : 12102479Title : Taps and cold forming taps - Part 1: Long type; General plan of dimensions
Relatedness :National : New
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
mining works.
Relatedness :National : NewEuropean : Not Equivalent to BS 3388:2004
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20120:1990
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
Page 50
Scope : mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20121:1990
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20123:1990
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20124:1990
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and
mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20125:1990
Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and Handles
Page 51
Scope : This standard covers shovels, spades and its handles using in agricultural, construction and mining works.
Relatedness :National : NewEuropean : Not Equivalent to DIN 20129:1990
Subsector : I09 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02338/0001 Project EstablishedICS : 25.140.30National Ref :Title : PunchesScope : This standard covers punches for metal working using handle
Relatedness :National : NewEuropean : Modified BS 3066:1995
Subsector : I09 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02338/0001 Project EstablishedICS : 25.140.30National Ref :Title : PunchesScope : This standard covers punches for metal working using handle
Relatedness :National : NewEuropean : Modified DIN 6451:2012
Subsector : I09 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02338/0001 Project EstablishedICS : 25.140.30National Ref :Title : PunchesScope : This standard covers punches for metal working using handle
Relatedness :National : NewEuropean : Modified DIN 6453:2012
Subsector : I09 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02338/0001 Project EstablishedICS : 25.140.30National Ref :Title : PunchesScope : This standard covers punches for metal working using handle
Relatedness :
Page 52
National : NewEuropean : Modified DIN 6455:1984
** End of Subsector **
Subsector I16: INTERNAL COMBUSTION ENGINES
Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst04252/0001 Project EstablishedICS : 29.160.40National Ref :Title : Generator Sets, Engine Driven Methods of Tests-Fuel Consumption TestScope : This standard covers the engine driven methods of tests for fuel consumption test in
generator sets.
Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011
Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst05733/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military, engine driven geretaor sets voltage modulation testScope : This standard covers the voltage modulation test methods for engine driven in generator
for military purpose.
Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011
Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06824/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military engine driven generator sets, line to line voltage unbalance
with unbalanced load testScope : This standard covers the military engine driven generator sets which can be loaded
unbalance with line to line voltage
Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011
Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06825/0001 Project EstablishedICS : 29.160.40National Ref :
Page 53
Title : Test Methods for Military, Engine Driven Generator Sets, Unbalanced Load Heating Test
Scope : This standard covers the unbalanced load heating test in engine driven generator sets for military uses.
Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011
Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06939/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military engine driven generator sets, valtage with unbalanced load
test (Line to neutral load)Scope : This standard covers the voltage with ınbalanced load test for military engine driven
generator sets.
Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011
** End of Subsector **
Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)
Subsector : I17 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12205/0001 Project EstablishedICS : 53.100National Ref :Title : Road RollersScope : This standard, includes the road rollers.
Relatedness :National : NewInternational : Not Equivalent to ISO 5502:1988
** End of Subsector **
Subsector I18: MINING
Subsector : I18 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 27501105/0001 Project EstablishedICS : 73.020National Ref : prPN-G-15022Title : Yielding arch roof support made of roof support arches -- Open arches -- Requirements
and testsScope : Specifies requirements and site tests of yielding roof support arches intent to use in
underground mines with and without bumps hazard
Relatedness :National : New
Page 54
Subsector : I18 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 27501106/0001 Project EstablishedICS : 01.080.30, 73.020National Ref : prPN-G-09010Title : Mine maps -- Different conventional geological marksScope : Specifies conventional marks concerning stratigraphy and tectonics of rocks mass,
hydrogeological phenomena, degrees recognition of rock-deposits and other geological phenomena, used on mining maps
Relatedness :National : New
** End of Subsector **
Subsector I19: NUCLEAR ENERGY
Subsector : I19 Registration Date : 2014-04-18Organization : ASI Draft Issue Date : 2014-04-15Country : AustriaProject ID : 00020977/0002 Project EstablishedICS : 11.020, 17.240National Ref : ÖNORM S 5234-4Title : Clinical dosimetry - Part 4: Method for dosimetry of small photon fieldsScope : Die vorliegende ÖNORM gilt für kleine Bestrahlungsfelder, die bei fluenzmodulierter
Strahlentherapie (IMRT), bei stereotaktischer Bestrahlung sowie bei fluenzmodulierter Strahlentherapie mit Bewegung der Gantry (IMAT) mit dem Elektronenbeschleuniger verwendet werden. Dies gilt sowohl für Beschleuniger mit als auch ohne Ausgleichsfilter. Die in dieser ÖNORM beschriebene Methode ist eine Anschlussmessung mit für die Dosimetrie kleiner Felder verwendbaren Strahlungsdetektoren zu Ionisationskammern, die gemäß ÖNORM S 5234-3 verwendet wer-den.
Relatedness :National : New
Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175069/0001 Project EstablishedICS :National Ref : PR NF P18-364Title : Admixtures for concretes, mortars and grouts. Routine grouts for prestressing ducts.
Capillary water absorption test.
Relatedness :National : REV/AMD P18-364:198507 (P18-364)
Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175078/0001 Project EstablishedICS :
Page 55
National Ref : PR XP S72-600Title : Helmets for parachuting
Relatedness :National : New
Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175249/0001 Project EstablishedICS :National Ref : PR NF A81-303Title : Covered electrodes for manual metal arc welding - Procedure for the deposition of weld
metal - Hardness tests
Relatedness :National : REV/AMD NF A81-303:200312 (A81-303)
Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175251/0001 Project EstablishedICS :National Ref : PR NF X06-039-4Title : Statistical techniques and methodology for use in validation of measurement methods
and assays - Part 4 : other statistical techniques
Relatedness :National : New
Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042838/0001 Project EstablishedICS :National Ref : PNE 73320-1Title : Standard method for the determination of environmental radioactivity. Sampling. Part 1:
SoilScope : This standard establishes the sampling method for the superficial layer of any type of soil to
obtain information about its background and analyse its evolution.
Relatedness :National : REV/AMD UNE 73311-1:2002
Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042839/0001 Project EstablishedICS :National Ref : PNE 73340-1Title : Standard method for the determination of environmental radioactivity. Analytical
Methods. Part 1: Gross beta activity index in water by gas flow proportional counter
Page 56
Scope : This standard establishes the test method for the measurement of gross beta activity in any type of water containing non-volatile beta emitting radionuclides with energies higher than 0,1 MeV
Relatedness :National : REV/AMD UNE 73311-4:2002
Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042840/0001 Project EstablishedICS :National Ref : PNE 73330-1Title : Standard method for the determination of environmental radioactivity. Preservation and
preparation of samples. Part 1: SoilScope : This standard establishes the method for the preservation and preparation of any type of
soil samples to guarantee that the physical-chemical characteristics of those samples will remain stable
Relatedness :National : REV/AMD UNE 73311-5:2002
Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042841/0001 Project EstablishedICS :National Ref : PNE 73320-2Title : Standard method for the determination of environmental radioactivity. Sampling. Part 2:
SedimentsScope : This standard establishes the sampling method for any type of sediments to obtain
information about its background values and analyse its evolution
Relatedness :National : REV/AMD UNE 73320-2:2004
Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042848/0001 Project EstablishedICS :National Ref : PNE 73340-2Title : Standard method for the determination of environmental radioactivity. Analytical
Methods. Part 2: Residual beta activity index in water by gas flow proportional counterScope : This standard establishes the test method for the measurement of residual beta activity in
any type of water containing non-volatile beta emitting radionuclides with energies higher than 0,1 MeV
Relatedness :National : REV/AMD UNE 73340-2:2003
Subsector : I19 Registration Date : 2014-04-01
Page 57
Organization : AENORCountry : SpainProject ID : P0042849/0001 Project EstablishedICS :National Ref : PNE 73340-3Title : Standard method for the determination of environmental radioactivity. Analytical
Methods. Part 3: 89Sr and 90Sr activity concentration in soil and sedimentsScope : This standard establishes the test method for the measurement of 89Sr and 90Sr in any type
of soil and sediments of environmental origin, proposing different analytical methods
Relatedness :National : REV/AMD UNE 73340-3:2004
** End of Subsector **
Subsector I27: EARTH MOVING AND CONSTRUCTION EQUIPMENT
Subsector : I27 (Secondary Subsector)
Registration Date : 2014-04-28
Organization : TSECountry : TurkeyProject ID : tst12205/0001 Project EstablishedICS : 53.100National Ref :Title : Road RollersScope : This standard, includes the road rollers.
Relatedness :National : NewInternational : Not Equivalent to ISO 5502:1988
** End of Subsector **
** End of Sector **
Information procedure Page 58
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector M : METALLIC MATERIALS
Register issued on : 2014-05-05
Page 59Subsector M10: METALLIC COATINGS
Subsector : M10 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst04922/0001 Project EstablishedICS : 25.220.40National Ref :Title : Anodic Oxidation Coatings On Aluminium and Wrought Aluminium AlloysScope : This standard covers extrusion profiles flat products bar profile and tubes which are made
from aluminium and wrought aluminium alloys that are coated by anodic oxidation.
Relatedness :National : NewEuropean : Modified BS 3987:1991
Subsector : M10 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst04922/0001 Project EstablishedICS : 25.220.40National Ref :Title : Anodic Oxidation Coatings On Aluminium and Wrought Aluminium AlloysScope : This standard covers extrusion profiles flat products bar profile and tubes which are made
from aluminium and wrought aluminium alloys that are coated by anodic oxidation.
Relatedness :National : NewEuropean : Modified DIN 17611:2011
** End of Subsector **
** End of Sector **
Information procedure Page 60
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector N : NON-METALLIC MATERIALS
Register issued on : 2014-05-05
Page 61Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2014-04-01Organization : MSZT Draft Issue Date : 2014-04-02Country : Hungary Latest Date for Comments : 2014-07-02Project ID : 34870615/0001 Project EstablishedICS : 75.160.20National Ref :Title : Light fuel oil for poer station (LFO-P). Requirements and test methods
Relatedness :National : REV/AMD MSZ 11717
Subsector : N03 Registration Date : 2014-04-17Organization : MSZT Draft Issue Date : 2014-04-18Country : Hungary Latest Date for Comments : 2014-07-18Project ID : 34870616/0001 Project EstablishedICS : 75.160.30National Ref :Title : Liquefied petroleum gases. Propane, butane and their mixtures as fuel. Requirements
and test methods
Relatedness :National : REV/AMD MSZ 1601
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06234271/0001 Project EstablishedICS : 59.080.20National Ref : DIN 53829-1Title : Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of
the force and extension on the running yarn, principles
Relatedness :National : New
Subsector : N05 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02994/0001 Project EstablishedICS : 59.080.30National Ref :Title : Textiles - Cotton and Cotton - Polyester Woven Sheet, Quiltcase and PillowcaseScope : This standard covers the specifications of woven sheet, quiltcase and pillowcase made of
cotton or cotton-polyester blend.
Relatedness :National : NewInternational : Modified ASTM D 5431:2008
Page 62
Subsector : N05 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst09692/0001 Project EstablishedICS : 61.020National Ref :Title : Textiles-BathrobeScope : This standard covers the specifications of bathrobes made of woven or knitted fabrics.
Relatedness :National : NewInternational : Modified ASTM D 7021:2005
** End of Subsector **
Subsector N06: RUBBER
Subsector : N06 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10979/0001 Project EstablishedICS : 23.040.20, 23.040.45National Ref :Title : Plastics Ring or Tubular - Determination of Apparent Tensile Strength Split Disk MethodScope : This standard scopes plastics Ring or Tubular - Determination of Apparent Tensile Strength
Split Disk Method
Relatedness :National : NewInternational : Modified ASTM D 2290:2012
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026139/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 1887Title : Textile glass - Determination of combustible-matter contentScope : This International Standard specifies a method for the determination of the combustible-
matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped Strands, milled fibres, fabrics, and continuous-filament mats and other glass reinforcements.
Relatedness :National : New
Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026140/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 3374
Page 63
Title : Reinforcement products - Mats and fabrics - Determination of mass per unit areaScope : This International Standard specifies a method for determining the mass per unit area of
mats or fabrics which may be manufactured with glass or carbon or aramid yarns.
Relatedness :National : New
Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026141/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 3375Title : Textile glass - Determination of stiffness of rovingsScope : This International Standard specifies a method for the determination of the stiffness of
textile glass rovings.
Relatedness :National : New
Subsector : N09 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042800/0001 Project EstablishedICS :National Ref : PNE 53934Title : Plastics. Elemental analysis in polymeric materials by X-ray fluorescence methodScope : This standard specifies a method of X-ray fluorescence for identification and quantification
of different elements in polymeric materials
Relatedness :National : New
Subsector : N09 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10887/0001 Project EstablishedICS : 83.080.20National Ref :Title : Plastics-Poliycarbonate (PC) and polycarbonate copolymer-Unfilled and reinforcedScope : This standard specifies Plastics-Poliycarbonate (PC) and polycarbonate copolymer
Relatedness :National : NewInternational : Modified ASTM D 3935:2009
Subsector : N09 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10887/0001 Project EstablishedICS : 83.080.20National Ref :
Page 64
Title : Plastics-Poliycarbonate (PC) and polycarbonate copolymer-Unfilled and reinforcedScope : This standard specifies Plastics-Poliycarbonate (PC) and polycarbonate copolymer
Relatedness :National : NewInternational : Modified ISO 7391:2006
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026134/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 8521Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test
methods for the determination of the apparent initial circumferential tensile strengthScope : This Standard specifies six test methods for the determination of the initial circumferential
tensile wall strength per unit of length of glass-reinforced thermosetting plastics (GRP) pipes.
Relatedness :National : New
Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026135/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 12512Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes -
Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe
Scope : This Standard specifies methods for determining the initial specific ring stiffness and resistance to initial ring deflection of pipes having a nominal size of DN 2000 or larger, using segment test pieces cut from a glass-reinforced thermosetting plastics (GRP) pipe. Two methods are given for determining initial specific ring stiffness, and within the specified deflection limits each is equally valid and may be used for any diameter.
Relatedness :National : New
Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026137/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 18851Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and
fittings - Test method to prove the structural design of fittingsScope : This Standard specifies methods of test for fittings of any form i.e. bends, branches, tapers
intended to be used in plastics piping systems for pressure and non-pressure drainage and sewerage or water supply, made of glass-reinforced thermosetting plastics (GRP). This
Page 65
Scope : International Standard is to prove the structural design of the fitting and not any connecting joint system, so it will, for example, include the connection of an integral flange but not a coupling on a spigot ended fitting. It assumes that the fitting either is or is not intended to be subject to the effects of hydrostatic end thrust.
Relatedness :National : New
Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026138/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 7685Title : Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes --
Determination of initial specific ring stiffnessScope : This Standard specifies methods for determining the initial specific ring stiffness of glass-
reinforced thermosetting plastics (GRP) pipes. Two methods are given, and within the specified deflection limits each is equally valid and may be used for any diameter.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 66
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2014-05-05
Page 67Subsector S02: TRANSFUSION EQUIPMENT
Subsector : S02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301636/0001 Project EstablishedICS :National Ref : 06301636Title : Catheter for medical use - Part 7: Determination of the x-ray attenuation of catheters;
requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT
Subsector : S04 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01400982/0001 Project EstablishedICS :National Ref : BS 8610Title : Personal fall equipment. Structural anchors and anchor systems not covered by
BS EN 795
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 11903842/0001 Project EstablishedICS :National Ref : 11903842Title : Dam plants - Part 13: Weirs
Relatedness :National : New
Subsector : S09 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042835/0001 Project EstablishedICS :National Ref : PNE 149201Title : Water supply. Sizing of installations inside buildings conveying water.Scope : The document develops a procedure to measure up the water installations inside of
buildings. The technical specifications are applicable to design new systems or to make alterations or restorations.
Page 68
Relatedness :National : REV/AMD UNE 149201:2008
** End of Subsector **
Subsector S15: SURGICAL INSTRUMENTS
Subsector : S15 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301637/0001 Project EstablishedICS :National Ref : 06301637Title : External introducer cannulae for suprapubic catheter systems for single use -
Requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector S16: AIDS FOR THE DISABLED
Subsector : S16 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 05300378/0001 Project EstablishedICS : 11.180.10National Ref : DIN 13000Title : Vehicles for transport in horizontal position - Motor vehicles for the transportation of
handicapped persons only capable of lying
Relatedness :National : New
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001881/0001 Project EstablishedICS : 13.030.01National Ref : NEN 6952:2014 Concept nlTitle : Leaching characteristics of solid earthy and stony building and waste materials -
Umbrella standard for the determination of selected elements in solid earthy-, stony building materials, wastes and eluates
Scope : In this umbrellastandard matrix indications for the determination of selected elements in solid earthy and stony building and waste materials, and in eluates obtained according NEN 7340. The application of the specific standards for which elements and in which situations is specified.
Relatedness :National : New
Page 69** End of Subsector **
Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS
Subsector : S27 (Secondary Subsector)
Registration Date : 2014-04-08
Organization : NENCountry : NetherlandsProject ID : 50001881/0001 Project EstablishedICS : 13.030.01National Ref : NEN 6952:2014 Concept nlTitle : Leaching characteristics of solid earthy and stony building and waste materials -
Umbrella standard for the determination of selected elements in solid earthy-, stony building materials, wastes and eluates
Scope : In this umbrellastandard matrix indications for the determination of selected elements in solid earthy and stony building and waste materials, and in eluates obtained according NEN 7340. The application of the specific standards for which elements and in which situations is specified.
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301595/0001 Project EstablishedICS : 11.180.20National Ref : DIN 13222Title : Absorption capacity of absorbent incontinence aids until leakage - Test method for
measuring the suction capacity by use of a test torso
Relatedness :National : New
Subsector : S99 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001880/0001 Project EstablishedICS : 11.140National Ref : NTA 8096 Concept nlTitle : Matrasses used for beds in health care institutionsScope : NTA 8096 is an a stage of inventarisation. Aspects which are investigated are among other
things: - quality aspects; - life span; - fire safety, microbiology; - user friendliness; - mechanical aspects; - specifications concerning control; - specifications concerning maintenance; - specifications concerning microbiology.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 70
Monthly Notifications Register
Notifications registered at CCMC from 2014-04-01 to 2014-04-30
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2014-05-05
Page 71Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202598/0001 Project EstablishedICS :National Ref : 13202598Title : Heavy hinged doors on ships - Part 1: Weathertigth (ISO-type) classification, technical
delivery conditions
Relatedness :National : New
Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202599/0001 Project EstablishedICS :National Ref : 13202599Title : Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details
Relatedness :National : New
Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202600/0001 Project EstablishedICS :National Ref : 13202600Title : Heavy hinged doors on ships - Part 3: Weathertight (ISO-type) installation
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401064/0001 Project EstablishedICS :National Ref : BS SP 66 and 67:1955+A2:2012 CorrigendumTitle : Specifications for Cable thimbles for aircraft. Corrigendum
Relatedness :National : New
Subsector : T02 Registration Date : 2014-04-10Organization : DIN
Page 72
Country : GermanyProject ID : 13115216/0001 Project EstablishedICS :National Ref : 13115216Title : Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two
lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
Relatedness :National : New
Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115217/0001 Project EstablishedICS :National Ref : 13115217Title : Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single
lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C
Relatedness :National : New
Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115218/0001 Project EstablishedICS :National Ref : 13115218Title : Aerospace - Nuts, hexagon with MJ thread, captive washer and counterbore, self-
locking, corrosion-resistant steel - Class: 1100 MPa/315 °C/425 °C; Text in German and English
Relatedness :National : New
Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115303/0001 Project EstablishedICS :National Ref : 13115303Title : Aerospace - Alternative materials for fasteners - Solid rivets; Amendment A1; Inactive
for new design
Relatedness :National : New
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2014-04-30Organization : AENORCountry : Spain
Page 73
Project ID : P0042957/0001 Project EstablishedICS :National Ref : PNE 53942Title : Plastics. Plastics bags reuse of polyethylene (PE) for the transport of products
distributed by retail. Requirements and test methodsScope : This standard specifies the features that should have reusable shopping bags made of
polyethylene (PE), intended nothings transport distributed retail products as well as their environmental criteria and test methods for determining such features, for a minimum number of 15 laps under normal conditions of use
Relatedness :National : REV/AMD UNE 53942:2012
** End of Subsector **
Subsector T18: ELEVATING PLATFORMS
Subsector : T18 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401119/0001 Project EstablishedICS :National Ref : BS 7980:2003+A1:2012 CorrigendumTitle : Vehicle lifts. Installation, maintenance, thorough examination and safe use.
Code of practice. Corrigendum
Relatedness :National : New
** End of Subsector **
Subsector T19: ROAD SAFETY
Subsector : T19 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0042328/0002 Draft for public enquiryICS :National Ref : PNE 135313Title : Vertical signs. Plates of galvanized steel sheet. Characteristics and tests methodsScope : This standard specifies the characteristics and test methods for the galvanized steel sheet
plates used for the vertical signs.
Relatedness :National : REV/AMD UNE 135310:2008, UNE 135313:2008
** End of Subsector **
Subsector T20: TRAM- AND RAILWAY ENGINEERING
Subsector : T20 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 08701148/0001 Project EstablishedICS :National Ref : 08701148
Page 74
Title : Ahesive bonding of railway vehicles and parts - Part 2: Qualification of manufacturer of adhesive bonded materials
Relatedness :National : New
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR