Monthly Notifications Register - SUTN€¦ · H11 Heater controls 161 58 H12 Ceramic and glass-ware...
Transcript of Monthly Notifications Register - SUTN€¦ · H11 Heater controls 161 58 H12 Ceramic and glass-ware...
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Register issued on : 2010-03-05
2010-02
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180,
373
A11 Security Services / CEN/BT/TF 167;
391; 384; 370;
CEN/WS 044
A12 Consultancy Services / 395; 381
A99 Undetermined / CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277;
346; 349 284; 288; 297; 340;
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371
CEN/BT WG 173 CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229 B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 /
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Technical energy saving 203 CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027
F99 Undetermined / 389
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2
65, 157
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196
378
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383 CEN/WS 019
N03 Petroleum products 28 19; 336 CEN/WS 038
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238
N22 Feather and related materials / 222
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162 CEN/WS 026
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC JWG/AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400 CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS 377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM
CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector A : SERVICES
Register issued on : 2010-03-05
Page 3Subsector A05: MAINTENANCE SERVICES
Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010620/0001 Project EstablishedICS : 03.100.01National Ref : U49010620Title : Maintenance - Guide for audits of the Maintenance System ManagementScope : This standard gives the guidelines and the general criteria to carry out a maintenance audit.
This standard has the primary aim to verify the strategic role of the maintenance function when individual plans have to be defined and when the strategic development and company asset management objectives have to be discovered. The coherence of the maintenance policies with the strategy of the company shall also be evaluated. This standard has the further aim to define the minimum qualification for the qualification of the auditor and the minimum requirements of the company maintenance system (for one-man, small and large companies).
Relatedness :National : REV/AMD
Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010630/0001 Project EstablishedICS : 03.100.01National Ref : U49010630Title : Maintenance - Integration between Design and MaintenanceScope : This standard proposes the criteria to be considered when an item is designed, in order to
duly take into consideration the maintenance needs. It is addressed to designers and manufacturers of goods.
Relatedness :National : REV/AMD
Subsector : A05 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 49010640/0001 Project EstablishedICS : 03.100.30National Ref : U49010640Title : Maintenance - Qualification of maintenance operators and technicians - Additional
indication with reference to CEN TR 15628Scope : This document refers to CEN TR 15628, which reports the current situation to define the
competence and knowledge levels of the maintenance personnel. It considers the typologies of professionality of the maintenance people and the minimum level of qualification in function of each role and industrial sector. Managerial, technical, engineering and operational roles are considered. Skill required for the operator who needs of carry out simple activity of operational maintenance and inspection (automaintenance) is considered as well. In particular levels of competence should be directly related to activities that play professionally trained at institutions operating in the area.
Relatedness :National : REV/AMD
Page 4
Subsector : A05 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167526/0001 Project EstablishedICS :National Ref : NF X60-027Title : Process of maintenance and bonds with the indicators
Relatedness :National : New
** End of Subsector **
Subsector A06: BUILDING AND CONSTRUCTION SERVICES
Subsector : A06 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSI Draft Issue Date : 2010-01-27Country : United Kingdom Latest Date for Comments : 2010-03-31Project ID : 00903054/0001 Draft for public enquiryICS :National Ref : BS 22475-2Title : Geotechnical investigation and testing. Sampling methods and groundwater
measurements. Part 2. Qualification criteria for enterprises and personnel
Relatedness :National : New
Subsector : A06 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10001/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3424Title : Condition survey of construction works - Contents and executionScope : This standard specifies requirements of a condition assessment of construction works (or
parts of it) and can be used for buildings, bridges, tunnels or other construction works. It describes and defines different levels of survey , condition classes and consequence classes.
Relatedness :National : New
Subsector : A06 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10002/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3600Title : Documentation requirements for condition assessment of houses in case of sales Scope : This standard specifies minimum requirements of a condition assessment of houses in case
of a sales situation.
Page 5
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED.
Subsector : A99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000180/0001 Project EstablishedICS :National Ref : BS 8540Title : Service design process. Guide
Relatedness :National : New
Subsector : A99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials
Relatedness :National : New
Subsector : A99 Registration Date : 2010-02-03Organization : NENCountry : NetherlandsProject ID : 50001534/0001 Project EstablishedICS : 03.080.20National Ref : NEN 8380:2010 Concept nlTitle : Customer contract centers - Certification scheme for NEN-EN 15838 Customer Contact
Centres - Requirements for service provisionScope : This standard describes the certification scheme which aknowledged certification bodies
can use by making an agreement with NEN.
Relatedness :National : New
Subsector : A99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 83000700/0001 Project EstablishedICS : 03.080.20, 03.100.10, 03.100.40National Ref : U83000700Title : Project Management - Guidelines to deliver services of project management for public
Page 6
Title : administrationsScope : This standard is intended to provide to central, peripheral and local government and all
organizations subject to similar legislation, a frame of reference and operational advice on all aspects that are related to the evaluation, acquisition and management of the project management services.
Relatedness :National : New
Subsector : A99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 83000720/0001 Project EstablishedICS : 03.080.01, 03.080.30, 03.120.10National Ref : U83000720Title : Services for relationship with the customer, the consumer and the citizen, through
contact centers - Operational requirements for the applicationScope : This standard gives reference indicators of the service requirements given by contact
centers, as per annexes A and B of EN 15838, to grant an objective evaluation of the quality level of the services, regardless model organization or technology. Additional requirements are proposed to apply the general recommendations of EN 15838, where specific indicators have not been defined in that standard. This standard is addressed to the contact centers and can be used by internal or external customers during design, agreement, qualification and verification of the service.
Relatedness :National : REV/AMD UNI 11200:2006
Subsector : A99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 83000730/0001 Project EstablishedICS : 03.060National Ref : U83000730Title : Guidelines to choose a personal financial planner foreseen by UNI ISO 22222Scope : This TR gives a guidance to allow a development of instruments and communication
models that can help the consumers to make a proper choice of a personal financial planner in line with their aims and considering the required service.
Relatedness :National : REV/AMD
** End of Subsector **
** End of Sector **
Information procedure Page 7
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2010-03-05
Page 8Subsector B01: FIRE PROTECTION.
Subsector : B01 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022958/0001 Project EstablishedICS :National Ref : ÖNORM F 3012Title : Electroacoustical alerting systems (SAS)Scope : This ÖNORM defines minimuim requirements for electroacoustical systems (SAS) and
regulates the coaction of all components to a SAS. All single components have to fulfill their relevant standards. To those components, to which no relevant standards exist, has to fulfill the requirments of clause 4. A comletion of the requirements of the individual components does not mean directly that the requirments of this ÖNORM are met when they are connected. The requirements within the scope of this ÖNORM applys on all connections of single components of SAS, which are dedicated, to manage people or to reduce evacuation times by a systematic use of messages within the protected area. Peripheral equipment has to be connected reactionless, if there are no specifications defined in this ÖNORM.
Relatedness :National : New
Subsector : B01 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095115/0001 Project EstablishedICS : 13.220.20, 91.060.50National Ref : prEVS 871Title : Fire safety and emergency exit doors and door hardware - UseScope : This standard specifies requirements for fire safety and emergency exit doors and door
hardware use in buildings.
Relatedness :National : REV/AMD EVS 871:2003
Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100720/0001 Project EstablishedICS :National Ref : 03100720Title : Command and control appliances - Part 2: Command and control car ELW 1
Relatedness :National : New
Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100721/0001 Project EstablishedICS :
Page 9
National Ref : 03100721Title : Command and control appliances - Part 3: Command and control car ELW 2
Relatedness :National : New
Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100722/0001 Project EstablishedICS :National Ref : 03100722Title : Command and control appliances - Part 5: Command car KdoW
Relatedness :National : New
Subsector : B01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 03100725/0001 Project EstablishedICS :National Ref : 03100725Title : Lines for fire-brigades - Requirements, test methods, maintenance; Amendment A1
Relatedness :National : New
Subsector : B01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 70001470/0001 Project EstablishedICS : 13.220.10National Ref : U70001470Title : Fire fighting equipment - Fire extinguishers - MaintenanceScope : This standard specifies the criteria for surveillance, control, revision and testing of fire
extinguishers in order to guarantee their operational efficiency.
Relatedness :National : REV/AMD UNI 9994:2003
Subsector : B01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 70001490/0001 Project EstablishedICS : 13.220.20National Ref : U70001490Title : Initial verification and maintenance of automatic fire detection and fire alarm systemsScope : This standard describes the procedures for initial verification, surveillance, regular control
and maintenance of automatic fire detection and fire alarm systems.
Relatedness :
Page 10
National : REV/AMD UNI 11224:2007
Subsector : B01 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 70001510/0001 Project EstablishedICS : 13.220.20National Ref : U70001510Title : Automatic sprinkler systems - Interpretations related to EN 12845Scope : This technical report provides a collection of interpretations related to the application of
EN 12845.
Relatedness :National : REV/AMD
Subsector : B01 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610946/0001 Draft for public enquiryICS : 13.220.01, 13.220.20National Ref : prNBN S 21-208-2/A1Title : Fire protection in buildings - Design and calculation of smoke and heat extraction
installations - Part 2: Covered car parking buildings
Relatedness :National : REV/AMD NBN S 21-208-2
** End of Subsector **
Subsector B02: STRUCTURES.
Subsector : B02 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00005/0001 Draft for public enquiryICS : 91.060.20National Ref : SIA 232/1Title : Bent roofs
Relatedness :National : REV/AMD SIA 232 (2000)
Subsector : B02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 73032330/0001 Project EstablishedICS : 53.080National Ref : U73032330Title : Metallic storage systems - Design of static steel pallet racks under seismic conditionsScope : This Technical Specification gives rules for the seismic design of steel static pallet racks. In
particular, information are given about the racks specific behaviour under seismic conditions, considering the state of the art of technical knowledge and the development of
Page 11
Scope : still ongoing European researches, in order to guarantee to the final users a well defined safety level.
Relatedness :National : REV/AMD
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2007-09-20Country : Belgium Latest Date for Comments : 2007-12-15Project ID : BE608873/0001 Draft for public enquiryICS : 91.080.40National Ref : prNBN EN 1992-1-1 ANBTitle : Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for
buildings
Relatedness :National : REV/AMD EN 1992-1-1
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610884/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1993-1-3 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-3 : General rules - Supplementary rules
for cold-formed members and sheeting - National annex
Relatedness :National : REV/AMD EN 1993-1-3
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610885/0001 Draft for public enquiryICS : 91.040.01, 91.080.10National Ref : prNBN EN 1993-1-4 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-4 : General rules - Supplementary rules
for stainless steels - National annex
Relatedness :National : REV/AMD EN 1993-1-4
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610886/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-5 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-5 : Plated structural elements - National
annex
Relatedness :National : REV/AMD EN 1993-1-5
Page 12
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610887/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-7 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-7 : Plated structures subject to out of
plane loading - National annex
Relatedness :National : REV/AMD EN 1993-1-7
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610888/0001 Draft for public enquiryICS : 91.010.30, 91.080.10, 93.040National Ref : prNBN EN 1993-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 2 : Steel bridges - National annex
Relatedness :National : REV/AMD EN 1993-2
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610889/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-3-1 ANBTitle : Eurocode 3 - Design of steel structures - Part 3-1 : Towers, masts and chimneys -
Towers and masts - National annex
Relatedness :National : REV/AMD EN 1993-3-1
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610890/0001 Draft for public enquiryICS : 65.040.20, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-1 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-1 : Silos - National annex
Relatedness :National : REV/AMD EN 1993-4-1
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610891/0001 Draft for public enquiry
Page 13
ICS : 23.020.01, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-2 : Tanks - National annex
Relatedness :National : REV/AMD EN 1993-4-2
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610892/0001 Draft for public enquiryICS : 23.040.01, 91.010.30, 91.080.10National Ref : prNBN EN 1993-4-3 ANBTitle : Eurocode 3 - Design of steel structures - Part 4-3 : Pipelines - National annex
Relatedness :National : REV/AMD EN 1993-4-3
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610893/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-5 ANBTitle : Eurocode 3 - Design of steel structures - Part 5 : Pilling - National annex
Relatedness :National : REV/AMD EN 1993-5
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-31Country : Belgium Latest Date for Comments : 2010-06-30
Project ID : BE610894/0001Draft for public
enquiry
ICS :91.010.30, 91.080.10, 91.080.40, 93.040
National Ref : prNBN EN 1994-2 ANBTitle : Eurocode 4 - Design of composite steen and concrete structures - Part 2 : General rules
and rules for bridges - National annex
Relatedness :National : REV/AMD EN 1994-2
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610936/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : prNBN EN 1993-1-6 ANBTitle : Eurocode 3 - Design of steel structures - Part 1-6 : Strength and stability of shell
structures - National annex
Page 14
Relatedness :National : REV/AMD EN 1993-1-6
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610937/0001 Draft for public enquiryICS : 91.010.30, 91.060.40, 91.080.10National Ref : prNBN EN 1993-3-2 ANBTitle : Eurocode 3 - Design of steel structures - Part 3-2 : Towers, matsts and chimneys -
Chimneys - National annex
Relatedness :National : REV/AMD EN 1993-3-2
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-31Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610938/0001 Draft for public enquiryICS : 53.020.20, 91.010.30, 91.080.10National Ref : prNBN EN 1993-6 ANBTitle : Eurocode 3 - Design of steel structures - Part 6 : Crane supporting structures - National
annex
Relatedness :National : REV/AMD EN 1993-5
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610942/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1991-3 ANBTitle : Eurocode 1 - Actions on structures - Part 3 : Actions induced by cranes and machinery -
National annex
Relatedness :National : REV/AMD EN 1991-3
Subsector : B02 Registration Date : 2010-02-09Organization : NBN Draft Issue Date : 2010-01-30Country : Belgium Latest Date for Comments : 2010-06-30Project ID : BE610943/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1991-4 ANBTitle : Eurocode 1 - Actions on structures - Part 4 : Silos and tanks - National annex
Relatedness :National : REV/AMD EN 1991-4
Page 15
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056024/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1990:2003/A1:2006/prNATitle : Eurocode - Basis of structural design - Amendment A1 - National AnnexScope : BDS EN 1990/A1/prNA establishes national determined parameters for design of structures
according BDS EN 1990/A1 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1990:2003/A1:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056025/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-3:2006/prNATitle : Eurocode 1: Actions on structures – Part 1-3: General actions – Snow loads - National
AnnexScope : BDS EN 1991-1-3/prNA establishes national determined parameters for design of structures
according BDS EN 1991-1-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1991-1-3:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056026/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-4:2005/prNATitle : Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions - National
AnnexScope : BDS EN 1991-1-4/prNA establishes national determined parameters for design of structures
according BDS EN 1991-1-4 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1991-1-4:2005
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056027/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-1-7:2006/prNATitle : Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions -
National AnnexScope : BDS EN 1991-1-7/prNA establishes national determined parameters for design of structures
according BDS EN 1991-1-7 in Bulgaria.
Relatedness :
Page 16
National : REV/AMD BDS EN 1991-1-7:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056028/0001 Draft for public enquiryICS : 91.010.30, 93.040National Ref : BDS EN 1991-2:2006/prNATitle : Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges - National AnnexScope : BDS EN 1991-2/prNA establishes national determined parameters for design of structures
according BDS EN 1991-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1991-2:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056029/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-3:2006/prNATitle : Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery -
National AnnexScope : BDS EN 1991-3/prNA establishes national determined parameters for design of structures
according BDS EN 1991-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1991-3:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056030/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1991-4:2006/prNATitle : Eurocode 1 - Actions on structures - Part 4: Silos and tanks - National AnnexScope : BDS EN 1991-4/prNA establishes national determined parameters for design of structures
according BDS EN 1991-4 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1991-4:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056031/0001 Draft for public enquiryICS : 13.220.50, 91.010.30, 91.080.40National Ref : BDS EN 1992-1-2:2005/prNATitle : Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire
design - National AnnexScope : BDS EN 1992-1-2/prNA establishes national determined parameters for design of structures
Page 17
Scope : according BDS EN 1992-1-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1992-1-2:2005
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056032/0001 Draft for public enquiryICS : 91.010.30, 91.080.40, 93.040National Ref : BDS EN 1992-2:2006/prNATitle : Eurocode 2: Design of concrete structures - Part 2: Concrete bridges – Design and
detailing rules - National AnnexScope : BDS EN 1992-2/prNA establishes national determined parameters for design of structures
according BDS EN 1992-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1992-2:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056033/0001 Draft for public enquiryICS : 91.010.30, 91.080.40National Ref : BDS EN 1992-3:2006/prNATitle : Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment
structures - National AnnexScope : BDS EN 1992-3/prNA establishes national determined parameters for design of structures
according BDS EN 1992-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1992-3:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056034/0001 Draft for public enquiryICS : 91.010.30National Ref : BDS EN 1993-1-3:2007/prNATitle : Eurocode 3: Design of steel structures - Part 1-3: General rules – Supplementary rules
for cold-formed members and sheeting - National AnnexScope : BDS EN 1993-1-3/prNA establishes national determined parameters for design of structures
according BDS EN 1993-1-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-1-3:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056035/0001 Draft for public enquiryICS : 91.040.01, 91.080.10
Page 18
National Ref : BDS EN 1993-1-4:2007/prNATitle : Eurocode 3: Design of steel structures – Part 1-4: General rules – Supplementary rules
for stainless steels - National AnnexScope : BDS EN 1993-1-4/prNA establishes national determined parameters for design of structures
according BDS EN 1993-1-4 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-1-4:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056036/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-6:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell
Structures - National AnnexScope : BDS EN 1993-1-6/prNA establishes national determined parameters for design of structures
according BDS EN 1993-1-6 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-1-6:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056037/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-7:2006/prNATitle : Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of
plane loading - National AnnexScope : BDS EN 1993-1-7/prNA establishes national determined parameters for design of structures
according BDS EN 1993-1-7 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-1-7:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056038/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1993-1-12:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of
EN 1993 up to steel grades S 700 - National AnnexScope : BDS EN 1993-1-12/prNA establishes national determined parameters for design of
structures according BDS EN 1993-1-12 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-1-12:2007
Subsector : B02 Registration Date : 2010-02-09
Page 19
Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056039/0001 Draft for public enquiryICS : 91.010.30, 91.080.10, 93.040National Ref : BDS EN 1993-2:2007/prNATitle : Eurocode 3: Design of steel structures - Part 2: Steel bridges - National AnnexScope : BDS EN 1993-2/prNA establishes national determined parameters for design of structures
according BDS EN 1993-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-2:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056040/0001 Draft for public enquiryICS : 65.040.20, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-1:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-1: Silos - National AnnexScope : BDS EN 1993-4-1/prNA establishes national determined parameters for design of structures
according BDS EN 1993-4-1 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-4-1:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056041/0001 Draft for public enquiryICS : 23.020.01, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-2:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-2: Tanks - National AnnexScope : BDS EN 1993-4-2/prNA establishes national determined parameters for design of structures
according BDS EN 1993-4-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-4-2:2007
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056042/0001 Draft for public enquiryICS : 23.020.01, 91.010.30, 91.080.10National Ref : BDS EN 1993-4-3:2007/prNATitle : Eurocode 3 - Design of steel structures - Part 4-3: Pipelines - National AnnexScope : BDS EN 1993-4-3/prNA establishes national determined parameters for design of structures
according BDS EN 1993-4-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1993-4-3:2007
Page 20
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056043/0001 Draft for public enquiryICS : 13.220.50, 91.010.30, 91.080.30National Ref : BDS EN 1996-1-2:2005/prNATitle : Eurocode 6: Design of masonry structures - Part 1-2: General rules – Structural fire
design - National AnnexScope : BDS EN 1996-1-2/prNA establishes national determined parameters for design of structures
according BDS EN 1996-1-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1996-1-2:2005
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056044/0001 Draft for public enquiryICS : 91.010.30, 91.080.30National Ref : BDS EN 1996-2:2006/prNATitle : Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of
materials and execution of masonry - National AnnexScope : BDS EN 1996-2/prNA establishes national determined parameters for design of structures
according BDS EN 1996-2 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1996-2:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056045/0001 Draft for public enquiryICS : 91.010.30, 91.080.30National Ref : BDS EN 1996-3:2006/prNATitle : Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for
unreinforced masonry structures - National AnnexScope : BDS EN 1996-3/prNA establishes national determined parameters for design of structures
according BDS EN 1996-3 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1996-3:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056046/0001 Draft for public enquiryICS : 91.120.25, 93.040National Ref : BDS EN 1998-2:2006/prNATitle : Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National
AnnexScope : BDS EN 1998-2/prNA establishes national determined parameters for design of structures
according BDS EN 1998-2 in Bulgaria.
Relatedness :
Page 21
National : REV/AMD BDS EN 1998-2:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056047/0001 Draft for public enquiryICS : 91.120.25National Ref : BDS EN 1998-4:2006/prNATitle : Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and
pipelines - National AnnexScope : BDS EN 1998-4/prNA establishes national determined parameters for design of structures
according BDS EN 1998-4 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1998-4:2006
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056048/0001 Draft for public enquiryICS : 91.120.25National Ref : BDS EN 1998-6:2005/prNATitle : Eurocode 8: Design of structures for earthquake resistance – Part 6: Towers, masts and
chimneys - National AnnexScope : BDS EN 1998-6/prNA establishes national determined parameters for design of structures
according BDS EN 1998-6 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1998-6:2005
Subsector : B02 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG056049/0001 Draft for public enquiryICS : 91.010.30, 91.080.10National Ref : BDS EN 1999-1-1:2007/prNATitle : Eurocode 9 - Design of aluminium structures - Part 1-1: General structural rules -
National AnnexScope : BDS EN 1999-1-1/prNA establishes national determined parameters for design of structures
according BDS EN 1999-1-1 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 1999-1-1:2007
Subsector : B02 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10003/0001 Project EstablishedICS : 91.010.20National Ref : prNS 8401Title : General conditions of contract for design commissionsScope : The standard has been prepared for use in a contractual relationship between the
Page 22
Scope : contractor and the architect or the engineer who carries out the design of the building
Relatedness :National : New
Subsector : B02 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10004/0001 Project EstablishedICS : 91.010.20National Ref : prNS 8402Title : General conditions for consultancy commissions with remuneration on the basis of
actual time takenScope : The standard has been prepared for use in a contractual relationship between the
contractor and the consultant with remuneration on the basis of actual time taken
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE.
Subsector : B03 Registration Date : 2010-02-11Organization : SUTNCountry : SlovakiaProject ID : 73001010/0001 Project EstablishedICS : 91.200, 93.020National Ref : STN 73 0090Title : Foundations. Geologic investigation for civil engineeringScope : STN 73 0090 is non-contradictory complementary national standard to assist the user in
Slovakia to apply Eurocode 7, Part 2. This standard will be reference document to National Annex to Eurocode 7-2, STN EN 1990/NA. The scope of this standard is to give more detailed information for geotechnical investigation than recommendations in Annex B, EN 1997-2 in accordance with EN 1997.
Relatedness :National : REV/AMD STN 73 0090
Subsector : B03 Registration Date : 2010-02-09Organization : BDSCountry : Bulgaria Latest Date for Comments : 2010-03-31Project ID : BG005003/0001 Draft for public enquiryICS : 91.080.40National Ref : BDS EN 13791:2007/prNATitle : Assessment of in-situ compressive strength in structures and precast concrete
components - National AnnexScope : BDS EN 13791/prNA establishes national determined parameters for assessment of in-situ
compressive strength in structures and precast concrete components according BDS EN 13791 in Bulgaria.
Relatedness :National : REV/AMD BDS EN 13791:2007
Page 23** End of Subsector **
Subsector B09: THERMAL MATTERS.
Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095112/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : prEVS 860Title : Thermal insulation of technical equipment - Insulation of pipes, vessels and equipment -
Application of thermal insulationScope : This standard is one part of "Thermal insulation of technical equipment" series, which is
made for engineers, contructors, but also for customers. Standard describes the application of thermal insulation of round ducts, vessels and equipment, where mineral wool is used as insulating material and metal cladding as covering material.
Relatedness :National : REV/AMD EVS 860:2006
Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095113/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : prEVS 860-6Title : Thermal insulation of technical equipment - Part 6: Insulation of pipes, vessels and
equipment - Cold InsulationScope : This standard is one part of "Thermal insulation of technical equipment" series, which is
made for engineers, contructors, but also for customers.This standard presents the most essential factors to be observed in the design, application of insulation and choice of materials of cold insulations for piping systems, vessels and equipment.
Relatedness :National : REV/AMD EVS 860:2008
Subsector : B09 Registration Date : 2010-02-10Organization : EVSCountry : EstoniaProject ID : 00095114/0001 Project EstablishedICS : 27.220, 91.120.10National Ref : EVS 860-1:2008/prA1Title : Thermal insulation of technical equipment - Part 1: Insulation of pipes, vessels and
equipment - Insulationg materials and elementsScope : This standard is one part of "Thermal insulation of technical equipment" series, which is
made for engineers, contructors, but also for customers.This standard describes the basic information needed for the planning and implementation of insulation.
Relatedness :National : REV/AMD EVS 860-1:2008
** End of Subsector **
Subsector B10: TIMBER STRUCTURES.
Page 24
Subsector : B10 Registration Date : 2010-02-26Organization : NSAICountry : IrelandProject ID : 01078868/0001 Project EstablishedICS : 79.040National Ref : I.S. 127Title : Structural timber - visual strength grading - Sawn softwoods with rectangular cross-
sectionScope : Standard will specify a method of visually strength grading structural softwood timber.
Relatedness :National : REV/AMD I.S. 127
** End of Subsector **
Subsector B12: MASONRY.
Subsector : B12 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167337/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-2/A1Title : Building works - Small mansonry unit walls - Partitions and walls - Part 1-2 : General
criteria for selection of materials
Relatedness :National : New
Subsector : B12 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167338/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P1-1/A1Title : Building works - Small mansonry unit walls - Partitions and walls - Part 1-1 : Contract bill
of technical model clauses
Relatedness :National : New
** End of Subsector **
Subsector B14: GEOTECHNICS.
Subsector : B14 Registration Date : 2010-02-01Organization : BSI Draft Issue Date : 2010-01-27Country : United Kingdom Latest Date for Comments : 2010-03-31Project ID : 00903054/0001 Draft for public enquiryICS :National Ref : BS 22475-2Title : Geotechnical investigation and testing. Sampling methods and groundwater
measurements. Part 2. Qualification criteria for enterprises and personnel
Relatedness :National : New
Page 25
** End of Subsector **
Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY.
Subsector : B17 Registration Date : 2010-02-22Organization : UNI Draft Issue Date : 2010-01-28Country : Italy Latest Date for Comments : 2010-03-11Project ID : 29000400/0001 Project EstablishedICS : 17.180.20National Ref : U29000400Title : Light and lighting - Protocol for the measurement of LED luminaires photometric dataScope : The standard gives the general principles for the measure of characteristic photometric
data of luminaire using the technology to LED and of modules LED.
Relatedness :National : REV/AMD
** End of Subsector **
Subsector B18: SCAFFOLDING.
Subsector : B18 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000129/0001 Project EstablishedICS :National Ref : BS 8539Title : Code of practice for the design and installation of anchors for safety-critical applications
Relatedness :National : New
Subsector : B18 Registration Date : 2010-02-19Organization : MSZTCountry : HungaryProject ID : 34831508/0001 Project EstablishedICS : 91.220National Ref :Title : On-site inspection of scaffolding system used in construction industry
Relatedness :National : REV/AMD MSZ 17177:2010
Subsector : B18 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0034169/0002 Draft for public enquiryICS :National Ref : PNE 180401Title : Load and unload platforms for construction sites. Product specifications and test
methodsScope : This Standard defines platforms, temporally fixed, used in the construction sites to load and
Page 26
Scope : unload materials.
Relatedness :National : New
** End of Subsector **
Subsector B20: DRAINAGE EQUIPMENT.
Subsector : B20 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022994/0001 Project EstablishedICS :National Ref : ÖNORM B 5101/ATitle : Separator systems for light liquids (e.g. oil and petrol) - Supplementary requirements to
ÖNORMEN EN 858-1 and -2, procedure for the proof of conformity - AmendmentScope : The Amendment A contains information which is esteemed to be necessary for drawing
attention upon the fact that the European Biofuel Directive may have influence upon light liquids separation systems. The efficiency of light liquids separation systems conforming to ÖNORM EN 858-1 or the ÖNORM B 5101 respectively may be reduced by the admixture of biofuels.
Relatedness :National : New
Subsector : B20 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167569/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P2Title : Installation of private (independent) sewerage systems - Private duvelling houses
comprising up to 10 rooms - Part 2: Design
Relatedness :National : New
Subsector : B20 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167570/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P1-2Title : Installation of private (independent) sewerage systems - Private duvelling houses
comprising up to 10 rooms - Part 1-2 : general criteria for selecting materials
Relatedness :National : New
Subsector : B20 Registration Date : 2010-02-25Organization : AFNOR
Page 27
Country : FranceProject ID : FA167571/0001 Project EstablishedICS :National Ref : NF DTU 64.1 P1-1Title : Installation of private (independent) sewerage systems - Private duvelling houses
comprising up to 10 rooms - Part 1-1 : contract dill of technical requirements
Relatedness :National : New
** End of Subsector **
Subsector B22: WALLCOVERINGS.
Subsector : B22 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00006/0001 Draft for public enquiryICS : 91.060.10National Ref : SIA 232/2Title : External walls with claddings ventilated at rear
Relatedness :National : REV/AMD SIA 233 (2000)
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT.
Subsector : B25 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01069080/0001 Project EstablishedICS : 23.060.40National Ref : E01069080Title : Gas pressure regulating installations for inlet max pressure of 12 bar for industrial,
similar and domestic use with downstream pressure between 0,04 and 0,5 barScope : The Standard specifies the criteria for the design, construction and testing of gas pressure
regulating and measurement of gas used for industrial use, without restriction of pressure and for civil use with downstream pressure more than 0,04 and not more 0,5 bar.
Relatedness :National : REV/AMD UNI 10619:1997
Subsector : B25 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01069090/0001 Project EstablishedICS : 23.060.40National Ref : E01069090Title : Gas pressure regulating installations for inlet pressure between 0,04 and 12 bar -
Operation and maintenanceScope : The standard specifies the criteria for the operation and maintenance of installations for
the reduction of gas pressure in order to ensure their proper functioning. It does not apply to sub-assemblies and plant components such as electrical devices, remote control device.
Page 28
Relatedness :National : REV/AMD UNI 10702:1998
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE.
Subsector : B26 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-25Country : Switzerland Latest Date for Comments : 2010-04-15Project ID : 0CH00008/0001 Draft for public enquiryICS : 93.080.01National Ref : SN 507701cTitle : General conditions for roads and traffic
Relatedness :National : New
Subsector : B26 Registration Date : 2010-02-24Organization : SUTNCountry : SlovakiaProject ID : 73001210/0001 Project EstablishedICS : 19.060, 93.080.10National Ref : STN 73 6192Title : Shock load test of flexible pavements and subgradesScope : Static and dynamic load tests of road pavements and subgrade. Parts: diagnostic equipment
and parameter, test procedure, records and evaluation
Relatedness :National : REV/AMD STN 73 6192
Subsector : B26 Registration Date : 2010-02-05Organization : SNV Draft Issue Date : 2010-01-02Country : Switzerland Latest Date for Comments : 2010-03-12Project ID : CH100002/0001 Draft for public enquiryICS : 93.080.30National Ref : SN 640696Title : Fauna and traffic; Waters passages, organization measures
Relatedness :National : New
Subsector : B26 Registration Date : 2010-02-18Organization : SNV Draft Issue Date : 2010-02-17Country : Switzerland Latest Date for Comments : 2010-03-15Project ID : CH100003/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640735bTitle : Conservation of concrete slabs, repair and maintenance
Relatedness :National : REV/AMD SN 640735a (1996)
Page 29
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS.
Subsector : B27 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-17Country : Switzerland Latest Date for Comments : 2010-04-15Project ID : 0CH00004/0001 Draft for public enquiryICS : 91.100.50National Ref : SIA 281/2Title : Sealing sheets and liquid applied sealings, peeling tensile testing
Relatedness :National : REV/AMD SIA 281/2 (1999)
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166216/0001 Project EstablishedICS :National Ref : PR NF P31-302/A1Title : Clay roofing tiles and fittings - Product definitions and specifications
Relatedness :National : REV/AMD NF EN 1304:200508 (P31-302)
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166217/0001 Project EstablishedICS :National Ref : PR NF P31-308-2/A1Title : Clay roofing tiles for discontinuous laying - Determination of physical characteristics -
Part 2 : test for frost resistance
Relatedness :National : REV/AMD NF EN 539-2:200609 (P31-308-2)
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167339/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P2Title : Building work - Sealing joint front by implementation of sealants - Part 2 : Contract bill of
special administrative model clauses
Relatedness :National : New
Subsector : B27 Registration Date : 2010-02-25
Page 30
Organization : AFNORCountry : FranceProject ID : FA167340/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P1-2Title : Building works - Sealing joint front by implementation of sealants- Part 1-2 : General
criteria for selection of materials
Relatedness :National : New
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167341/0001 Project EstablishedICS :National Ref : PR NF DTU 44.1 P1-1Title : Building works - Sealing joint front by implementation of sealants- Part 1-1 : Contract bill
of technical model clauses
Relatedness :National : New
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167343/0001 Project EstablishedICS :National Ref : PR NF P31-203-1/A3Title : Building work - Roof covering made of clay flat interlocking tiles - Part 1 : Technical
specifications
Relatedness :National : New
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167344/0001 Project EstablishedICS :National Ref : PR NF P31-202-1/A3Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1 : Contract
bill of technical clauses
Relatedness :National : New
Subsector : B27 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167345/0001 Project EstablishedICS :
Page 31
National Ref : PR NF P31-201-1/A4Title : Building works - Roof covering made from hollow terracotta tiles - Part 1-: Contract bill of
technical clauses
Relatedness :National : New
** End of Subsector **
Subsector B31: HEATING SYSTEMS IN BUILDINGS.
Subsector : B31 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 0204A071/0001 Project EstablishedICS : 91.140.10National Ref : E0204A071Title : Cogeneration - Micro and small-scale cogeneration units fed with liquid and gaseous
fuels - Part 1: Exhaust emission measurementScope : The standard specifies the principles, criteria and modes to define procedures, instruments
and test cycles for test bench measurement of exhaust emissions from prime mover in stationary conditions and to determine weighted specific-emission values for any air pollutant emitted.
Relatedness :National : REV/AMD
Subsector : B31 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 0204A072/0001 Project EstablishedICS : 91.140.10National Ref : E0204A072Title : Cogeneration - Micro and small-scale cogeneration units fed with liquid and gaseous
fuels - Part 2: Determination of airborne noise by enveloping surface methodScope : The standard specifies the principles, criteria and operating conditions to assess airborne
noise emissions from micro and small-scale cogeneration units, by applying UNI EN ISO 3744.
Relatedness :National : REV/AMD
Subsector : B31 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 0204A073/0001 Project EstablishedICS : 91.140.10National Ref : E0204A073Title : Cogeneration - Micro and small-scale cogeneration units fed with liquid and gaseous
fuels - Part 3: Ex-ante measurement of energy performancesScope : The standard describes a method for the ex-ante measurement of the energy performances
of micro and small-scale cogeneration units by means of experimental tests carried out in an independent laboratory.
Relatedness :
Page 32
National : REV/AMD
Subsector : B31 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 0204A074/0001 Project EstablishedICS : 91.140.10National Ref : E0204A074Title : Cogeneration - Micro and small-scale cogeneration units fed with liquid and gaseous
fuels - Part 4: Requirements for installation and putting into serviceScope : This standard specifies the requirements for combustion air adduction, ventilation and flue
gases evacuation systems, cooling systems, fuel-feeding systems, characteristics of the thermal recovery circuit; the standard specifies also the requirements for putting into service the units.
Relatedness :National : REV/AMD
Subsector : B31 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0208B690/0001 Project EstablishedICS : 17.200.10, 91.140.10National Ref : E0208B690Title : Centralized heating system - Heating costs sharingScope : This standard specifies heating costs sharing for centralized heating system with or without
heat measuring devices.
Relatedness :National : REV/AMD UNI 10200:2005, UNI 9901:1987
** End of Subsector **
Subsector B99: UNDETERMINED.
Subsector : B99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 00515212/0001 Project EstablishedICS :National Ref : 00515212Title : Subsoil.
Relatedness :National : New
Subsector : B99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000036/0001 Project EstablishedICS :
Page 33
National Ref : BS XXXXTitle : Water sampling for buildings. Heating and chilled water systems
Relatedness :National : New
Subsector : B99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000129/0001 Project EstablishedICS :National Ref : BS 8539Title : Code of practice for the design and installation of anchors for safety-critical applications
Relatedness :National : New
Subsector : B99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials
Relatedness :National : New
Subsector : B99 Registration Date : 2010-02-25Organization : SNV Draft Issue Date : 2010-02-22Country : Switzerland Latest Date for Comments : 2010-04-23Project ID : 0CH00007/0001 Draft for public enquiryICS : 91.060.01National Ref : SIA 118/232Title : General conditions for bent roofs and for external walls with claddings ventilated at rear
- Contract terms for standards SIA 232/1 and 232/2
Relatedness :National : New
Subsector : B99 Registration Date : 2010-02-03Organization : NENCountry : NetherlandsProject ID : 50001508/0001 Project EstablishedICS : 91.120.10, 91.140.30National Ref : NVN 7125:2009 Concept nlTitle : Energy performance standard for measurements Scope : This standard gives term, definitions and the method to determine the indicator of energy
performance of a building. In this general part general calculation rules are given, based on
Page 34
Scope : the European standards drawn up by the European Committee for a mandate for the energy performance directive of buildings (EPBD). In different part application rules are given for house-building versus non-residential building and new estate versus existing works.
Relatedness :National : New
Subsector : B99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 87004990/0001 Project EstablishedICS : 91.100.01National Ref : U87004990Title : Determination of the degradation of nitrogen oxides in the air by inorganic photocatalytic
materials: continuous flow test methodScope : This standard describes a method aimed at assessing the index of photocatalytic abatement
for nitrogen oxides NOX (NO+NO2) occurring in the source gas, due to the action of inorganic materials present in cementitious and/or lime or ceramic matrices. The adimensional photocatalytic abatement index, obtained by applying the methodology described herein, refers only to the test conditions reported in this standard with the purpose of making comparisons among the activities of various products and does not constitute a physical measurement of the photocatalytic activity that can be used to forecast or estimate the absolute nitrogen oxides abatement effect of the applied product.
Relatedness :National : REV/AMD UNI 11247:2007
Subsector : B99 (Secondary Subsector)
Registration Date : 2010-02-10
Organization : SNCountry : NorwayProject ID : NOT10001/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3424Title : Condition survey of construction works - Contents and executionScope : This standard specifies requirements of a condition assessment of construction works (or
parts of it) and can be used for buildings, bridges, tunnels or other construction works. It describes and defines different levels of survey , condition classes and consequence classes.
Relatedness :National : New
Subsector : B99 (Secondary Subsector)
Registration Date : 2010-02-10
Organization : SNCountry : NorwayProject ID : NOT10002/0001 Project EstablishedICS : 91.010.30National Ref : prNS 3600Title : Documentation requirements for condition assessment of houses in case of sales Scope : This standard specifies minimum requirements of a condition assessment of houses in case
Page 35
Scope : of a sales situation.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 36
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2010-03-05
Page 37Subsector C01: Food products
Subsector : C01 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 59017240/0001 Project EstablishedICS : 67.260National Ref : U59017240Title : Food industry environment - Insect monitoring systemsScope : This standard specifies a method to plan and realize insect monitoring systems in food
industry environment in order to take actions and strategies of fight against insects.
Relatedness :National : REV/AMD
Subsector : C01 Registration Date : 2010-02-10Organization : SNCountry : NorwayProject ID : NOT10005/0001 Project EstablishedICS : 67.120.30National Ref : prNS 9413Title : Fish and fish products - Norwegian Wetsalted Cod - Requirements on qualityScope : This standard specifies quality requirements on Norwegian wetsalted cod and wetsalted
filet of cod.
Relatedness :National : New
** End of Subsector **
Subsector C02: PAINTS AND RELATED PRODUCTS.
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O030/0001 Project EstablishedICS : 87.040National Ref : E0910O030Title : Paint and varnishes - Determination of pigment volume concentrationScope : Specifies a procedure for the determination of pigment volume concentration.
Relatedness :National : REV/AMD UNI 10103:1992
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O040/0001 Project EstablishedICS : 87.060.10National Ref : E0910O040Title : Pigments and extenders for paints and varnishes - Comparative evaluation of solvents
resistanceScope : Specifies a procedure for solvent resistance comparison with standard reference of same
characteristics. It is applicable to all coloured and dark pigment.
Page 38
Relatedness :National : REV/AMD UNI 9966:1992
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O050/0001 Project EstablishedICS : 87.040National Ref : E0910O050Title : Paint and varnishes - Tin stability of thixotropic polyesters for wood and wood substrates
at different temperaturesScope : Specifies a procedure for the determination of tin stability of thixotropic polyesters for
wood and wood substrates at different temperatures.
Relatedness :National : REV/AMD UNI 10154:1993
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O060/0001 Project EstablishedICS : 87.040National Ref : E0910O060Title : Paints and varnishes - Thermosetting powder coatings - Test methodsScope : Specifies methods for measuring of characteristics of thermosetting powder paints, both as
powder and as coatings of applied and cured paints.
Relatedness :National : REV/AMD UNI 10408:1995
Subsector : C02 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910O070/0001 Project EstablishedICS : 87.040National Ref : E0910O070Title : Paints and varnishes - Determination of the abrasion resistance by "TABER" apparatusScope : Specifies a procedure for measuring of abrasion resistance of paint films by "TABER"
apparatus. This standard is not suitable for paints which hardness is under 15 s.
Relatedness :National : REV/AMD UNI 10559:1996
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O080/0001 Project EstablishedICS : 87.040National Ref : E0910O080Title : Paints and varnishes - Emulsion paints for interior masonry - Wet scrub resistance -
Brush method
Page 39
Scope : This standard specifies a procedure for the determination of water and detergents wet scrub resistance of an emulsion paint for interior masonry.
Relatedness :National : REV/AMD UNI 10560:1996
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O090/0001 Project EstablishedICS : 87.020National Ref : E0910O090Title : Paint and varnishes - Paints and varnishes - Polymeric painted subtracts for building -
Test methodsScope : This standard specifies test methods for organic coatings, with or without pigments, applied
on polymeric substrates for building.
Relatedness :National : REV/AMD UNI 10726:1998
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O120/0001 Project EstablishedICS : 87.040National Ref : E0910O120Title : Paint and varnishes - Determination of the hardness - Pencil testScope : This standard specifies a procedure for hardness determination by scratching of painted
surface using a pencil of certain hardness.
Relatedness :National : REV/AMD UNI 10782:1999
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O130/0001 Project EstablishedICS : 87.040National Ref : E0910O130Title : Paint and varnishes - Wall paints for interiors, white or light coloured - Determination of
dirt pick-upScope : This standard specifies a procedure to estimate the tendency of a mural paint film to
absorbe very fine pigment particles. This value is meant to be a guide of tendency of applied paint to absorbe dust and other impurities settled on surface and therefore get dirty.
Relatedness :National : REV/AMD UNI 10792:1999
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : Italy
Page 40
Project ID : 0910O140/0001 Project EstablishedICS : 87.040National Ref : E0910O140Title : Paint and varnishes - Emulsion paints - Check of film formation at a fixed temperatureScope : This standard specifies a procedure to check if at a fixed temperature the paint makes a
continuous and free from craking film. This check has the purpose both to determine the minimum environmental condition of application of tested paint, and to know how many degrees over the minimun temperature the application is carried out.
Relatedness :National : REV/AMD UNI 10793:1999
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O150/0001 Project EstablishedICS : 87.040National Ref : E0910O150Title : Paint and varnishes - Emulsion paints for interiors - Assessment of application and
recoatibily characteristicsScope : This standard specifies a procedure to assess the facility of application and recoatibility
characteristics of emulsion mural paints.
Relatedness :National : REV/AMD UNI 10794:1999
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O160/0001 Project EstablishedICS : 87.040National Ref : E0910O160Title : Paint and varnishes - Emulsion paints for interiors - Important characteristics for
comparative or no-comparative testsScope : This standard specifies the characteristics and test methods for emulsion paints for
interiors. These characteristics are important both for the use by consumer and for comparative tests according to UNI CEI 70027.
Relatedness :National : REV/AMD UNI 10795:1999
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O170/0001 Project EstablishedICS : 87.100National Ref : E0910O170Title : Paint and varnishes - Coating material and coatings systems for rooms with the
presence of foodstuff - Requirements and test methodsScope : This standard specifies requirements and relative test methods of paints and varnishes
suitable for walls and ceilings of rooms containing food.
Relatedness :
Page 41
National : REV/AMD UNI 11021:2002
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O210/0001 Project EstablishedICS : 87.020National Ref : E0910O210Title : Wrapping coatings for asbestos-cement sheets - Requirements and test methodsScope : This standard specifies the requirements, test methods and criteria of acceptability of
wrapping coatings for asbestos-cement flat or corrugated slabs, designed to prevent asbestos fibre dispersion in the environment. This standard is applicable also to coatings of general fibro-cement flat or corrugated slabs, having decorative or protective aim.
Relatedness :National : REV/AMD UNI 10686:1998
Subsector : C02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O220/0001 Project EstablishedICS : 87.020National Ref : E0910O220Title : Wrapping coatings for asbestos-cement sheets - Assessment of the wrapping coating
feasibility to asbestos-cement productScope : This standard specifies the criteria to verify if a wrapping coating, complying to UNI 10686,
gives a suitable adhesion to a specific surface of a product, made of plane or corrugated asbestos-cement sheets setted-up in deterioration conditions as they are. This standard is suitable also for wrapping coatings for products made of any type of plane or corrugated fibro-cement sheets.
Relatedness :National : REV/AMD UNI 10687:1998
Subsector : C02 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167055/0001 Project EstablishedICS :National Ref : PR NF T36-005Title : Paints and varnishes Characterization of coating materials
Relatedness :National : REV/AMD NF T36-005:198909 (T36-005)
** End of Subsector **
Subsector C03: CHEMISTRY.
Subsector : C03 (Secondary Subsector)
Registration Date : 2010-02-11
Organization : DIN
Page 42
Country : GermanyProject ID : 06233413/0001 Project EstablishedICS :National Ref : 06233413Title : Testing of carbonaceous materials - Determination of bulk density by buoyancy method
and the open porosity by impregnation with water - Solid materials
Relatedness :National : New
Subsector : C03 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-10Project ID : P0033804/0002 Draft for public enquiryICS :National Ref : PNE 84742Title : Cosmetic raw materials. Sunscreens. Determination of mercury in titanium dioxide by
atomic absorption spectrometryScope : This standard establishes a method for the determination of mercury in titanium dioxide
for cosmetic use.
Relatedness :National : New
** End of Subsector **
Subsector C13: FERTILIZERS.
Subsector : C13 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00023014/0001 Project EstablishedICS :National Ref : ÖNORM S 2202-2Title : Guidelines for application of compost - Part 2: Agricultural applicationsScope : In the present ÖNORM the application of compost to the grades A+ and A on soils with the
following agricultural and forestry uses are identified: agriculture, grassland, garden and field vegetable production, viticulture, orchards, hop, forest.
Relatedness :National : New
Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O180/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O180Title : Fertilizers - Analytical methods - Determination of cadmium, chromium, copper, nickel,
lead and zinc - Extraction with DTPA (Diethilentriaminoacetic acid) methodScope : This Standard specifies a method for the determination of cadmium, chromium, copper,
nickel, lead and zinc extractable from fertilizers with a solution of DTPA at pH 7,3.
Relatedness :
Page 43
National : REV/AMD UNI 10662:1998
Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O190/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O190Title : Fertilizers - Analytical methods - Determination of organic carbon of biological origin
extractable with water and pyrosphosphateScope : This Standard specifies a method for the determination of organic carbon of biological
origin present in fertilizer products extractable with water and pyrophosphate.
Relatedness :National : REV/AMD UNI 10664:1998
Subsector : C13 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O200/0001 Project EstablishedICS : 65.080, 71.040.40National Ref : E0910O200Title : Fertilizers - Analytical methods - Determination of organic carbon according to Springer-
Klee - Titrimetric methodScope : This standard specifies a titrimetric method for the determination of the biological origin
carbon.This standard does not apply for fertilizers (organic and organomineral fertilizer and organic soil improvers) which contain slow release products (urea condensates).
Relatedness :National : REV/AMD UNI 10665:1998
** End of Subsector **
Subsector C18: ADHESIVES
Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N470/0001 Project EstablishedICS : 83.180National Ref : E0910N470Title : Adhesives - Determination of total nitrogen contentScope : This standard defines a method for the determination of total nitrogen contained in
adhesives. It applies to all nitrogen containing adhesives, excluded those containing nitrogroups.
Relatedness :National : REV/AMD UNI 9971:1992
Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : Italy
Page 44
Project ID : 0910N480/0001 Project EstablishedICS : 83.180National Ref : E0910N480Title : Adhesives - Adhesives - Determination of reactivity of phenolic adhesivesScope : The method is based on the determination of time necessary to reach stage B of phenolic
resins by the use of a hot plate in conventional conditions.
Relatedness :National : REV/AMD UNI 9973:1992
Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N490/0001 Project EstablishedICS : 83.180National Ref : E0910N490Title : Adhesives - Adhesives - Determination of tolerance to dilution with water of amino- and
phenolic-resinsScope : This standard defines a method for the determination of tolerance to dilution with water of
amino- and phenolic-resins; it is applicable to phenolic-, melamine- and urea-melamine-resins for liquid adhesives. It is not applicable to ureic resins for adhesives.
Relatedness :National : REV/AMD UNI 9974:1992
Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N500/0001 Project EstablishedICS : 83.180National Ref : E0910N500Title : Adhesives - Adhesives - Determination of mechanical stability of water dispersionsScope : This standard is based on the quantity of coagulum formed when a dispersion is stirred with
a high speed stirrer. It applies to any dispersion adhesives.
Relatedness :National : REV/AMD UNI 9975:1992
Subsector : C18 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N510/0001 Project EstablishedICS : 83.180National Ref : E0910N510Title : Adhesives for paper - Determination of maximum open timeScope : This test method determines the max open time of adhesives for paper and board.
Relatedness :National : REV/AMD UNI 10114:1993
Subsector : C18 Registration Date : 2010-02-16
Page 45
Organization : UNICountry : ItalyProject ID : 0910N520/0001 Project EstablishedICS : 83.180National Ref : E0910N520Title : Adhesives for paper - Determination of wet way adhesion strengthScope : This test method determines the wet way adhesion strength of adhesives for paper and
board.
Relatedness :National : REV/AMD UNI 10115:1993
** End of Subsector **
Subsector C99: UNDETERMINED.
Subsector : C99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 42008280/0001 Project EstablishedICS : 71.100.70National Ref : U42008280Title : Cosmetics - Good Manufacturing Practice (GMP) of ingredients used for the
manufacture of cosmetics productsScope : This standard gives a guideline for production, control, packaging and transport of
ingredients used for the manufacture of cosmetics products.
Relatedness :National : REV/AMD
** End of Subsector **
** End of Sector **
Information procedure Page 46
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2010-03-05
Page 47Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES.
Subsector : F14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022956/0001 Project EstablishedICS :National Ref : ÖNORM A 1205Title : Testing of prints and printing inks - Resistance to soapsScope : This ÖNORM is to be used exclusively for tests using alkaline soaps. It is applicable for test
prints made according to ÖNORM A 1200-1 and -2 and for test prints which were provided by the producer of the test prints. Sampling is made according to ÖNORM ISO 186.
Relatedness :National : New
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL.
Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233407/0001 Project EstablishedICS :National Ref : 06233407Title : Ion exchange - Terminology
Relatedness :National : New
Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233422/0001 Project EstablishedICS :National Ref : 06233422Title : Testing of carbon materials; determination of the Mettler softening point; binding and
impregnating materials
Relatedness :National : New
Subsector : F15 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233423/0001 Project EstablishedICS :National Ref : 06233423Title : Testing of carbon materials - Determination of dynamic moduls of elasticity by the
resonance method - Solid materials
Relatedness :National : New
Page 48** End of Subsector **
Subsector F17: ADMINISTRATIVE DOCUMENTS.
Subsector : F17 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04300545/0001 Project EstablishedICS :National Ref : 04300545Title : Electronic Business - Model agreement on invoicing with structured electronic data
interchange (EDI)
Relatedness :National : New
** End of Subsector **
Subsector F19: OPTICS.
Subsector : F19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 02702283/0001 Project EstablishedICS :National Ref : 02702283Title : Production in optical engeneering - Indexing of hydrolic expansion chucks
Relatedness :National : New
** End of Subsector **
Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK.
Subsector : F21 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022957/0001 Project EstablishedICS :National Ref : ÖNORM A 6760Title : Value Analysis - Management of value analyses-projectsScope : This ÖNORM gives the user of the method a guideline for the preparation and to
accomplish the value analysis task, especially for the planning for the management of value analysis projects. The standards for value analysis and value mangement together with the referenced literature should improve and deepen the holistic understanding of value management.
Relatedness :National : New
** End of Subsector **
Subsector F99: UNDETERMINED.
Subsector : F99 Registration Date : 2010-02-01Organization : BSI
Page 49
Country : United KingdomProject ID : 01000180/0001 Project EstablishedICS :National Ref : BS 8540Title : Service design process. Guide
Relatedness :National : New
Subsector : F99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 09500235/0001 Project EstablishedICS :National Ref : 09500235Title : General principles for the safe design of products
Relatedness :National : New
Subsector : F99 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 30110600/0001 Project EstablishedICS : 35.240.30National Ref : U30110600Title : Supporting Interoperability in Preservation and Retrieval of digital Objects (SInCRO)Scope : This Standard defines the data elements supporting the "replacement" preservation
process: more precisely, it specifies and supplements some rules of CNIPA's deliberation 19 February 2004, n. 11. It identifies the information elements needed to design the preservation index (the so-called "lock file") and defines their semantics and articulation through the XML formal language. This Standard aims at allowing stakeholders to use a common data structure in order to gain an adequate degree of interoperability along migration processes, thanks to the adoption of the XML Schema provided.
Relatedness :National : REV/AMD
Subsector : F99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 83000690/0001 Project EstablishedICS : 03.080.20National Ref : U83000690Title : Guidelines to use the management consulting to organize, manage and develop the
small enterprisesScope : This document introduces the various possibilities of the management consulting to
support the small enterprises in their organisation, management and development. It is applicable to small enterprises to decide how to buy and to check the supply of process of consultancy. It also applies to the subjects offering this service to adapt it to the small enterprises.
Relatedness :
Page 50
National : REV/AMD
Subsector : F99 Registration Date : 2010-02-22Organization : UNI Draft Issue Date : 2010-02-01Country : Italy Latest Date for Comments : 2010-03-15Project ID : 83000740/0001 Project EstablishedICS : 03.060National Ref : U83000740Title : Financial education of citizens - Service requirementsScope : This standard gives indication about design, achievement, supply and evaluation of financial
education. This standard establishes terms, objectives, classification, typologies, contents and priorities, modes and minimum requirements in order to fully reach the scope in coherence with UNI ISO 22222 and with the current standardisation activity.
Relatedness :National : REV/AMD
Subsector : F99 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167461/0001 Project EstablishedICS :National Ref : XP X50-052Title : Intelligence Strategic Management
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 51
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2010-03-05
Page 52Subsector H04: SPORTS EQUIPMENT.
Subsector : H04 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 11200800/0001 Project EstablishedICS :National Ref : 11200800Title : Slacklines - Functional and safety requirements and test methods
Relatedness :National : New
Subsector : H04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 61002590/0001 Project EstablishedICS : 97.220.30National Ref : U61002590Title : Fitness - Requirements, management and technical personnel of fitness centresScope : This standard specifies requirements for fitness centres where fitness practice is done. The
standard consider dedicated spaces to fitness practice, equipment and technical personnel. Moreover the standard give a guidance on management aspects, in particular to organization, emergency and communication/problems management.
Relatedness :National : REV/AMD
** End of Subsector **
Subsector H09: FURNITURE.
Subsector : H09 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167261/0001 Project EstablishedICS :National Ref : PR NF X15-206Title : Laboratory fume cupboards. Threshold for confinement test, installation and
maintenance
Relatedness :National : REV/AMD XP X15-206:200501 (X15-206)
** End of Subsector **
Subsector H18: CENTRAL HEATING BOILERS.
Subsector : H18 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 01519200/0001 Project EstablishedICS : 91.060.40National Ref : E01519200Title : Metal - Chimneys/ flue liners / flue duets - Selection and suitable utilisation according to
Page 53
Title : the intended use and designationScope : This standard addresses the selection criteria for not flexible metal chimney, flue ducts, flue
liners and for flexible metal flue ducts for relining, according to the correct pairing to appliance considered and installation layout in conformity to UNI EN 1443 and other relevant applicable EN standards.
Relatedness :National : REV/AMD UNI/TS 11278:2008
** End of Subsector **
Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)
Subsector : H33 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167304/0001 Project EstablishedICS :National Ref : PR NF P90-127Title : Construction of Sports facilities - Specifications
Relatedness :National : New
** End of Subsector **
Subsector H99: UNDETERMINED.
Subsector : H99 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022934/0001 Project EstablishedICS : 81.040.30National Ref : ONR 191040Title : Bird-safe glass - Testing of efficiencyScope : This ONR specifies a method to test the efficiency of a bird-safe glass. Bird-safe glass in
terms of this ONR are transparent glass and other transparent materials (eg PMMA), which were made visible for birds by certain methods (eg marking) to minimize the collision risk.
Relatedness :National : New
Subsector : H99 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022960/0001 Project EstablishedICS :National Ref : ÖNORM S 1008Title : Private keeping of fancy mice Scope : This ÖNORM describes the private keeping of fancy mice (including their keeping e.g. in
kindergartens and pensioners' residences), particularly concerning the condition and equipment of shelters and keeping systems. The objective of this ÖNORM is the optimization of keeping conditions under the aspect of appropriateness to the species.
Relatedness :
Page 54
National : New
Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000193/0001 Project EstablishedICS :National Ref : 04000193Title : Equipment for commercial kitchens - Insertion trays - Dimensions
Relatedness :National : New
Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000195/0001 Project EstablishedICS :National Ref : 04000195Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part
2: Commercial coffee machines
Relatedness :National : New
Subsector : H99 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 04000196/0001 Project EstablishedICS :National Ref : 04000196Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part
3: Deep fat fryers
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 55
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector I : MECHANICAL ENGINEERING
Register issued on : 2010-03-05
Page 56Subsector I02: FASTENERS.
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B170/0001 Project EstablishedICS : 21.060.10National Ref : U2404B170Title : Wood screws - Thread and endsScope : This standard defines thread and ends of wood screws with dimensions of thread from
diameters 1,6 to 20 mm included.
Relatedness :National : REV/AMD UNI 699:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B180/0001 Project EstablishedICS : 21.060.10National Ref : U2404B180Title : Slotted round head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted round head wood
screws and the nominal diameters from 1,6 to 8 mm included.
Relatedness :National : REV/AMD UNI 701:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B190/0001 Project EstablishedICS : 21.060.10National Ref : U2404B190Title : Slotted countersunk (flat) head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted countersunk (flat)
head wood screw and the nominal diameters from 1,6 to 10 mm included.
Relatedness :National : REV/AMD UNI 702:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B200/0001 Project EstablishedICS : 21.060.10National Ref : U2404B200Title : Slotted countersunk (oval) head wood screwsScope : This standard specifies the dimensions and the characteristics of slotted countersunk (oval)
head wood screws and the nominal diameters from 1,6 to 8 mm included.
Relatedness :National : REV/AMD UNI 703:1980
Page 57
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B210/0001 Project EstablishedICS : 21.060.10National Ref : U2404B210Title : Hexagon head wood screwsScope : This standard specifies the dimensions and the characteristics of hexagon head wood
screws with nominal diameters from 4 to 20 mm included.
Relatedness :National : REV/AMD UNI 704:1980
Subsector : I02 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 2404B220/0001 Project EstablishedICS : 21.060.10National Ref : U2404B220Title : Cross recessed pan head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed pan head
wood screws and the nominal diameters from 2,5 to 8 mm included.
Relatedness :National : REV/AMD UNI 8180:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B230/0001 Project EstablishedICS : 21.060.10National Ref : U2404B230Title : Cross recessed countersunk (flat) head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed
countersunk (flat) head wood screws and the nominal diameters from 2,5 to 8 mm included.
Relatedness :National : REV/AMD UNI 8181:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B240/0001 Project EstablishedICS : 21.060.10National Ref : U2404B240Title : Cross recessed countersunk (oval) head wood screwsScope : This standard specifies the dimensions and the characteristics of cross recessed
countersunk (oval) head wood screws and the nominal diameters from 2,5 to 8 mm included.
Page 58
Relatedness :National : REV/AMD UNI 8182:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B250/0001 Project EstablishedICS : 21.060.10National Ref : U2404B250Title : Hexagon head tapping screws with collarScope : This standard specifies the dimensions and the characteristics of hexagon head tapping
screws with collar and the nominal diameters from ST 2,9 to ST 8 mm included
Relatedness :National : REV/AMD UNI 6950:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B260/0001 Project EstablishedICS : 21.060.10National Ref : U2404B260Title : Hexagon head drilling screws with tapping screws threadScope : This standard specifies the dimensions and the characteristics of hexagon head drilling
screws with tapping screws thread from ST 2,9 to ST 6,3 mm included.
Relatedness :National : REV/AMD UNI 8116:1980
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B270/0001 Project EstablishedICS : 21.060.10National Ref : U2404B270Title : Two-thread tapping screws for plastics - Screw thread and endsScope : This standard specifies the thread and ends of two-thread tapping screws for plastics
materials with nominal dimensions of thread from diameters 3 to 7 mm included.
Relatedness :National : REV/AMD UNI 9702:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B280/0001 Project EstablishedICS : 21.060.10National Ref : U2404B280Title : Two-thread tapping screws for plastics - Field of application and core holesScope : This standard defines the diameters of core holes and material thickness for application two
Page 59
Scope : thread tapping screws for plastic materials. The tapping screws in the present standard are foreseen for application on plastic materials or similar like, for example, alveolar fibrous structure, composite, wood conglomerate, resins, etc.
Relatedness :National : REV/AMD UNI 9703.1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B290/0001 Project EstablishedICS : 21.060.10National Ref : U2404B290Title : Two-thread hexagon head tapping screws for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread exagon head
tapping screws for plastics materials with nominal diameters from 3,5 to 7 mm included.
Relatedness :National : REV/AMD UNI 9704:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B300/0001 Project EstablishedICS : 21.060.10National Ref : U2404B300Title : Two-thread hexagon head tapping screws with collar for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread hexagon head
tapping screws with collar for plastics materials with nominal diameters from 3,5 to 7 mm included.
Relatedness :National : REV/AMD UNI 9705:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B310/0001 Project EstablishedICS : 21.060.10National Ref : U2404B310Title : Two-thread hexagon head tapping screws with large collar for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread hexagon head
tapping screws with large collar for plastics materials with nominal diameters from 3,5 to 7 mm included.
Relatedness :National : REV/AMD UNI 9706:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : Italy
Page 60
Project ID : 2404B320/0001 Project EstablishedICS : 21.060.10National Ref : U2404B320Title : Two-thread pan head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread pan head
tapping screws with cross recessed for plastics materials with nominal diameters from 3 to 7 mm included.
Relatedness :National : REV/AMD UNI 9707:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B330/0001 Project EstablishedICS : 21.060.10National Ref : U2404B330Title : Two-thread flange pan head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread flange pang
head tapping screws with cross recessed for plastics materials with nominal diameters from 3,5 to 7 mm included.
Relatedness :National : REV/AMD UNI 9708:1990
Subsector : I02 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 2404B340/0001 Project EstablishedICS : 21.060.10National Ref : U2404B340Title : Two-thread countersunk (flat) head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of two-thread countersunk
(flat) head tapping screws with cross recessed for plastics materials with nominal diameters from 3 to 7 mm included.
Relatedness :National : REV/AMD UNI 9709:1990
Subsector : I02 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 2404B350/0001 Project EstablishedICS : 21.060.10National Ref : U2404B350Title : Two-thread raised countersunk (oval) head tapping screws with cross recessed for
plastics materialsScope : This standard specifies the dimensions and the characteristics of two-thread raised
countersunk (oval) head tapping screws with cross recessed for plastics materials with nominal diameters from 3 mm to 7 mm included.
Relatedness :National : REV/AMD UNI 9710:1990
Page 61
** End of Subsector **
Subsector I06: PRESSURE VESSELS.
Subsector : I06 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 0203B442/0001 Project EstablishedICS : 23.020.30, 27.060.30National Ref : E0203B442Title : Pressure equipment - Putting into service and use of pressure equipment and
assemblies - Part 2: Calculations and inspection of pressure components under creep conditions
Scope : The standard specifies the technical prescriptions for the calculations and inspection of pressure components under creep conditions.
Relatedness :National : New
Subsector : I06 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 0203B444/0001 Project EstablishedICS : 23.020.30, 27.060.30National Ref : E0203B444Title : Pressure equipment - Putting into service and use of pressure equipment and
assemblies - Part 4: Integrity assessment methods for pressure equipment running under creep conditions
Scope : The standard specifies technical prescriptions for control of pressure equipment running under conditions that may produce creep.
Relatedness :National : New
** End of Subsector **
Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY.
Subsector : I15 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167332/0001 Project EstablishedICS :National Ref : PR NF M58-003Title : Hydrogen systems installation
Relatedness :National : New
** End of Subsector **
Subsector I19: NUCLEAR ENERGY.
Subsector : I19 Registration Date : 2010-02-15
Page 62
Organization : ASICountry : AustriaProject ID : 00022959/0001 Project EstablishedICS :National Ref : ÖNORM S 5245Title : Diagnostic reference levels in X-ray diagnostics - Monitoring of the complianceScope : This Austrian Standard provides practical instructions for monitoring the compliance of the
diagnostic reference levels in X-ray diagnostics in due consideration of general legal provisions.
Relatedness :National : New
Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233413/0001 Project EstablishedICS :National Ref : 06233413Title : Testing of carbonaceous materials - Determination of bulk density by buoyancy method
and the open porosity by impregnation with water - Solid materials
Relatedness :National : New
Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233414/0001 Project EstablishedICS :National Ref : 06233414Title : Terms and definitions of nuclear technology; Part 7: Safety of nuclear installations
Relatedness :National : New
Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233415/0001 Project EstablishedICS :National Ref : 06233415Title : Terms and definitions of nuclear technology; Part 8: Radiation
Relatedness :National : New
Page 63
Subsector : I19 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233416/0001 Project EstablishedICS :National Ref : 06233416Title : Safety marking in radiation protection
Relatedness :National : New
** End of Subsector **
Subsector I36: THERMOPROCESSING TECHNOLOGY.
Subsector : I36 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0207B160/0001 Project EstablishedICS : 13.020.01, 13.100, 13.200National Ref : E0207B160Title : Major hazard process plants - Safety management systems - Guidelines for
implementation of UNI 10617Scope : The Guideline specify the accomplishment modalities for the essential requirements of UNI
10617 and, for each requirement, describes intent, procedures and technical tools needed for the reach of specific targets.
Relatedness :National : REV/AMD UNI 10616:1997
** End of Subsector **
** End of Sector **
Information procedure Page 64
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector M : METALLIC MATERIALS
Register issued on : 2010-03-05
Page 65Subsector M01: STEEL.
Subsector : M01 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167450/0001 Project EstablishedICS :National Ref : PR NF A35-080-1Title : Reinforcing steel - Weldable steel - Part 1 : bars and coils
Relatedness :National : REV/AMD NF A35-016-1:200711 (A35-016-1), NF A35-019-1:200711 (A35-019-1)
Subsector : M01 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167451/0001 Project EstablishedICS :National Ref : PR NF A35-080-2Title : Reinforcing steel - Weldable steel - Part 2 : welded fabric
Relatedness :National : REV/AMD NF A35-016-2:200711 (A35-016-2), NF A35-019-2:200711 (A35-019-2)
** End of Subsector **
Subsector M03: FOUNDRY TECHNOLOGY, INCLUDING CAST IRON.
Subsector : M03 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA166996/0001 Project EstablishedICS :National Ref : PR NF E82-004Title : Die forging - Repair conditions before delivery
Relatedness :National : New
** End of Subsector **
Subsector M04: COPPER.
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022140/0001 Project EstablishedICS : 77.150.30National Ref : E12022140Title : Copper and copper alloys - Tubes for heat exchangers and desalting plants -
Determination of speciated carbon residues on the internal surface - Combustion method
Scope : This Italian Standard specifies the general criteria and specific performing way in order to determine the carbon content, if any on the inner surface of copper alloy tubes intended for heat exchanger and desalting plants use. This Standard provides also the speciation of
Page 66
Scope : the total carbon.
Relatedness :National : REV/AMD UNI 10730:1999
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022150/0001 Project EstablishedICS : 77.120.30, 77.150.30National Ref : E12022150Title : Copper and copper alloys - Pre-insulated copper tubes, tubes with solid covering for gas
transport under soil - Properties and test on plastic coveringScope : This Italian Standard specifies properties and inspection of plastic solid covering applied to
copper tubes, by extrusion process.
Relatedness :National : REV/AMD UNI 10823:2000
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022160/0001 Project EstablishedICS : 77.120.30National Ref : E12022160Title : Copper and copper alloys - Ingots and castings - Special aluminium bronze
(CuAl9Fe3Zn3Ni2) for remelting of mechanical articles with tight tolerancesScope : This Italian Standard specifies the requirements of special aluminium bronze and casting for
remelting of mechanical articles with tight tolerances high mechanical resistance and good machinability. Provisions are given for classification, special copper aluminium alloy designation, production conditions, characteristics and identification marking.
Relatedness :National : REV/AMD UNI 10800:1999
Subsector : M04 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 12022170/0001 Project EstablishedICS : 77.120.30National Ref : E12022170Title : Copper and copper alloys - Ingots and castings - Zinc-bronze (CuSn6Zn6)Scope : This italian standard specifies the requirements of zinc bronze ingot and casting for
remelting to be used in the production of artistical articles. Classification and designation of this zinc bronze, together with production conditions, characteristics and marking identification are also provided.
Relatedness :National : REV/AMD UNI 10799:1999
Subsector : M04 Registration Date : 2010-02-12Organization : UNI
Page 67
Country : ItalyProject ID : 12022181/0001 Project EstablishedICS : 77.150.30National Ref : E12022181Title : Bronze scraps - Part 1: Impure binary Cu Sn alloy - Types, characteristics and chemical
compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation for
impure binary tin bronze. The yield and the chemical composition are also given.
Relatedness :National : REV/AMD UNI 10596-1:1997
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022182/0001 Project EstablishedICS : 77.150.30National Ref : E12022182Title : Bronze scraps - Part 2: Cu Sn alloy for general purposes - Types, characteristics and
chemical compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation of
industrial tin bronze scraps. The yield and chemical composition of metal are also given.
Relatedness :National : REV/AMD UNI 10596-2:1997
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022183/0001 Project EstablishedICS : 77.150.30National Ref : E12022183Title : Bronze scraps - Part 3: Leaded Cu Sn alloy - Types, characteristics and chemical
compositionScope : This Italian Standard specifies the types, characteristics, extra loss and industrial leaded tin
bronze scraps. The yield and chemical composition of metal are also given.
Relatedness :National : REV/AMD UNI 10596-3:1997
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022184/0001 Project EstablishedICS : 77.150.30National Ref : E12022184Title : Bronze scraps - Part 4: Engineering Cu Sn alloy - Types, characteristics and chemical
compositionScope : This Italian Standard specifies the types, characteristics, extra loss engineering tin bronze
scraps. The yield and chemical composition of metal are also given.
Relatedness :National : REV/AMD UNI 10596-4:1997
Page 68
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022185/0001 Project EstablishedICS : 77.150.30National Ref : E12022185Title : Bronze scraps - Part 5: Cu Sn alloy for valves - Types, characteristics and chemical
compositionScope : This Italian Standard specifies the types, characteristics, extra loss and designation for tin
bronze valve scraps. The yield and chemical composition of metal are also given.
Relatedness :National : REV/AMD UNI 10596-5:1997
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022191/0001 Project EstablishedICS : 77.150.30National Ref : E12022191Title : Bronze scraps - Part 1: Aluminium bronze 1st category - Types, characteristics and
chemical compositionScope : This Italian Standard specifies types, characteristics, extra loss of first category aluminium
bronze scrap. Designation, yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10597-1:1996
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022192/0001 Project EstablishedICS : 77.150.30National Ref : E12022192Title : Bronze scraps - Part 2: Aluminium bronze 2nd category - Types, characteristics and
chemical compositionScope : This Italian Standard specifies types, characteristics, extra loss of second category
aluminium bronze scrap. Designation, yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10597-2:1996
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022201/0001 Project EstablishedICS : 77.120.30National Ref : E12022201Title : Copper and copper alloys - Metallography - Part 1: Macroscopic examinationScope : This Italian Standard specifies the preparation methods and surface etching on semifinished
and casting sections of copper and copper alloys products, considering the possibility to perform these operations on the total or part of the test sample surface intended for macro examination.
Page 69
Relatedness :National : REV/AMD
Subsector : M04 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12022202/0001 Project EstablishedICS : 77.120.30National Ref : E12022202Title : Copper and copper alloys - Metallography - Microscopic examinationScope : This Italian Standard specifies the preparation methods and surface etching of test samples
from copper and copper alloys products intended for micro examination.
Relatedness :National : REV/AMD
Subsector : M04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 12022230/0001 Project EstablishedICS : 77.120.30National Ref : E12022230Title : Copper and copper alloys - Plumbing fittings - Fitting with press ends for use with
composite copper tubesScope : This Italian Standard specifies materials and test requirements for copper and copper alloys
to be used for connecting composite copper tubes intended for cold/hot water in general and heating/cooling systems. Fuel gas transport is also included.
Relatedness :National : REV/AMD
** End of Subsector **
Subsector M08: LIGHT ALLOYS.
Subsector : M08 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000265/0001 Project EstablishedICS :National Ref : BS 3L 500Title : Procedure for inspection, testing and acceptance of wrought magnesium-base alloys
Relatedness :National : New
Page 70
Subsector : M08 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000266/0001 Project EstablishedICS :National Ref : BS 5L 100Title : Procedure for inspection, testing and acceptance of wrought aluminium and aluminium
alloys
Relatedness :National : New
Subsector : M08 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000267/0001 Project EstablishedICS :National Ref : BS 5L 101Title : Procedure for inspection, testing and acceptance of aluminium-base and magnesium-
base ingots and castings
Relatedness :National : New
Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043690/0001 Project EstablishedICS : 77.120.10, 77.150.10National Ref : E12043690Title : Aluminium and aluminium alloys - Extruded tubes with internal epoxy resin and external
polypropylene coating - Requirements and testsScope : This Italian Standard specifies constructive and dimensional requirements of bridge-dye,
extruded tubes containing an inner epoxy resin coating with a polypropylene external coating intended to be used in the field of fluid transport.
Relatedness :National : REV/AMD UNI 10732:2000
Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043700/0001 Project EstablishedICS : 77.150.10, 91.060.50National Ref : E12043700Title : Aluminium and aluminium alloys - Windows and doors of aluminium and aluminium
alloys for building purposes - Specifications for the choice, use and tests of materialsScope : This Italian Standard specifies the choice criteria, use and test of materials and semifinished
products with relative finishing intended to be used in the manufacturing of aluminium alloys windows and doors.
Relatedness :
Page 71
National : REV/AMD UNI 3952:1998
Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043710/0001 Project EstablishedICS : 77.150.10National Ref : E12043710Title : Aluminium alloys - Pressure die casting - General requirements for deliveryScope : This Italian Standard specifies the ordering information data, the general technical
conditions for inspection and delivery of aluminium alloys pressure die casting. It is not applicable to normal gravity casting processes.
Relatedness :National : REV/AMD UNI 10429:1996
Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043720/0001 Project EstablishedICS : 77.150.10National Ref : E12043720Title : Pressure die castings of aluminium alloy - General tolerancesScope : This Italian Standard specifies dimensional tolerances and form of pressure die castings, of
appendice casting and allowance. It applies to design dimensions without any specific tolerance references.
Relatedness :National : REV/AMD UNI 10569:1996
Subsector : M08 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12043730/0001 Project EstablishedICS : 77.120.10National Ref : E12043730Title : Aluminium and aluminium alloys - Aluminium alloy castings for components requiring
leak tightnessScope : This Italian Standard specifies the conditions for the request and choice of leak tightness
test to be performed upon any aluminium alloy casting produced in the foundry. It provides: the identification of the test to be performed: differential pressure method, immersion air-water method (bubble), helium method test; the indications to be given during the ordering stage relative to the leak tightness request, the information's to be given into the final report; technical aspects qualifying better the test are also precised (leak tightness generals, measuring units used, leak level allowable).
Relatedness :National : REV/AMD UNI 10903:2001
** End of Subsector **
Subsector M14: NICKEL.
Page 72
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000027/0001 Project EstablishedICS :National Ref : BS 2HR 209Title : Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting
alloy plate, sheet and strip. (Ni base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000029/0001 Project EstablishedICS :National Ref : BS 3HR 401Title : Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless
tubes. (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000030/0001 Project EstablishedICS :National Ref : BS 2HR 402Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy
seamless tubes. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000031/0001 Project EstablishedICS :National Ref : BS 2HR 403Title : Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes. (Nickel
base, Cr 19.5, Ti 0.4)
Relatedness :National : New
Page 73
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000032/0001 Project EstablishedICS :National Ref : BS 2HR 404Title : Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting
alloy seamless tubes. (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000181/0001 Project EstablishedICS :National Ref : BS 3HR 501Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold
drawn wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000182/0001 Project EstablishedICS :National Ref : BS 3HR 502Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold
drawn and solution treated wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000183/0001 Project EstablishedICS :National Ref : BS 3HR 503Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for
thread inserts. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)(0.45 mm to 2 mm diameter)
Relatedness :National : New
Page 74
Subsector : M14 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000184/0001 Project EstablishedICS :National Ref : BS 3HR 504Title : Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets.
(Maximum diameter or minor sectional dimension 20 mm)(Nickel base, Cr 19.5, Ti 0.4)
Relatedness :National : New
** End of Subsector **
Subsector M20: TIN AND TIN ALLOYS.
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030721/0001 Project EstablishedICS : 77.120.60National Ref : E12030721Title : Tin scraps - Types, characteristics and chemical composition - Part 1: Unalloyed tinScope : This Italian Standard specifies, types, characteristics, extra loss and designation of not
alloyed tin scrap. The yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10432-1:1995
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030722/0001 Project EstablishedICS : 77.120.60National Ref : E12030722Title : Tin scraps - Types, characteristics and chemical composition - Part 2: Soldering tin
alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation of tin scrap
from soldering alloys. The yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10432-2:1995
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030723/0001 Project EstablishedICS : 77.120.60National Ref : E12030723Title : Tin scraps - Types, characteristics and chemical composition - Part 3: PewterScope : This Italian Standard specifies, types, characteristics, extra loss and designations from
pewter scrap. The yield and chemical composition are also provided.
Page 75
Relatedness :National : REV/AMD UNI 10432-3:1995
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030724/0001 Project EstablishedICS : 77.120.60National Ref : E12030724Title : Tin scraps - Types, characteristics and chemical composition - Part 4: White metal
bearing tin alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation from white
metal bearing tin alloy scrap. The yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10432-4:1995
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030725/0001 Project EstablishedICS : 77.120.60National Ref : E12030725Title : Tin scraps - Types, characteristics and chemical composition - Part 5: Mixed tin alloysScope : This Italian Standard specifies, types, characteristics, extra loss and designation from tin
alloys scrap mixture. The yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10432-5:1995
Subsector : M20 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030726/0001 Project EstablishedICS : 77.120.60National Ref : E12030726Title : Tin scraps - Types, characteristics and chemical composition - Part 6: Tin drippings,
skimmings, oxides and ashesScope : This Italian Standard specifies, types, characteristics, extra loss and designation from tin
drippings, skimmings oxides and ashes. The yield and chemical composition are also provided.
Relatedness :National : REV/AMD UNI 10432-6:1995
** End of Subsector **
Subsector M22: LEAD AND LEAD ALLOYS.
Subsector : M22 Registration Date : 2010-02-12Organization : UNICountry : Italy
Page 76
Project ID : 12030730/0001 Project EstablishedICS : 77.120.60National Ref : E12030730Title : Lead alloys for batteries - Pb-Sb, Pb-Ca and Pb-Sn alloys - Types and requirementsScope : This Italian Standard specifies the chemical composition and designation of lead alloy ingots
for batteries. Furthermore some requirements for mass aspect and marking are also established.
Relatedness :National : REV/AMD UNI 10353:1994
** End of Subsector **
Subsector M99: UNDETERMINED.
Subsector : M99 (Secondary Subsector)
Registration Date : 2010-02-01
Organization : BSICountry : United KingdomProject ID : 01000028/0001 Project EstablishedICS :National Ref : BS 2HR 240Title : Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate,
sheet and strip. (Cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
Relatedness :National : New
Subsector : M99 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12000060/0002 Project EstablishedICS : 55.100National Ref : E12000060Title : Glass containers - Pilfer proof mouths with pourerScope : This Italian Standard specifies form, dimension and tolerances of holes and external profile
of pilfer proof mouths with pourer, intended to be used on glass containers.
Relatedness :National : REV/AMD UNI 10666:1998
Subsector : M99 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 12030710/0001 Project EstablishedICS : 77.150.60National Ref : E12030710Title : Tin-lead alloys for soft solderings and coatings - Types and requirementsScope : This Italian Standard specifies the chemical composition and designation of tin-lead alloys
in ingots, bars or wires intended to be used for soft soldering and surface coating processes. Requirements for mass, aspect and product marking are also provided.
Relatedness :National : REV/AMD UNI 10368:1994
Page 77
** End of Subsector **
** End of Sector **
Information procedure Page 78
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector N : NON-METALLIC MATERIALS
Register issued on : 2010-03-05
Page 79Subsector N01: PAPER AND BOARD.
Subsector : N01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 07400174/0001 Project EstablishedICS :National Ref : 07400174Title : Paper and board - Vocabulary - Amendment A1
Relatedness :National : New
** End of Subsector **
Subsector N02: SOLID FUELS.
Subsector : N02 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O110/0001 Project EstablishedICS : 75.160.10National Ref : E0910O110Title : Hard coal - Expansion determination of coal - Koppers methodScope : This standard specifies a method for the determinazion of the "pushing power" of a coal,
defined as the pressure exercised by the coal when, under heating, it cannot expand freely.
Relatedness :National : REV/AMD UNI 10729:1999
** End of Subsector **
Subsector N03: PETROLEUM PRODUCTS.
Subsector : N03 Registration Date : 2010-02-01Organization : SIST Draft Issue Date : 2010-03-01Country : Slovenia Latest Date for Comments : 2010-05-01Project ID : 00019392/0001 Draft for public enquiryICS : 75.160, 75.160.20National Ref : SIST EN 14214:2009+A1:2010/oA101:2010Title : Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements
and test methods
Relatedness :National : New
Subsector : N03 Registration Date : 2010-02-01Organization : SIST Draft Issue Date : 2010-03-01Country : Slovenia Latest Date for Comments : 2010-05-01Project ID : 00019393/0001 Draft for public enquiryICS : 75.160, 75.160.20National Ref : SIST EN 590:2009+A1:2010Title : Automotive fuels - Diesel - Requirements and test methods
Relatedness :
Page 80
National : New
Subsector : N03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233421/0001 Project EstablishedICS :National Ref : 06233421Title : Testing of petroleum products - Method for sample preparation - Part 2: ...
Relatedness :National : New
Subsector : N03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 06233432/0001 Project EstablishedICS :National Ref : 06233432Title : Testing of mineral oils and related materials - Determination of density
Relatedness :National : New
Subsector : N03 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O100/0001 Project EstablishedICS : 75.160.30National Ref : E0910O100Title : Petroleum products - LPG for aerosol - Determination of 1,3 butadiene -
Gascromatographic methodScope : This standard specifies a gas-chromatographic method for the determination of 1,3
butadiene in liquified petroleum gas for aerosol mixtures and for other uses. The standard is applicable for 1,3 butadiene contents higher than 0,010 % m/m.
Relatedness :National : REV/AMD UNI 10728:1999
** End of Subsector **
Subsector N04: REFRACTORIES.
Subsector : N04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1325C591/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C591Title : Plastics packaging from post-consumer selected as homogeneous fractions -
Assessment of conformity of the batch to the specification of homogeneity - Part 1: Polyethylenterephtalate (PET) liquid container
Scope : The standard defines a method of sampling and of the assessment of conformity to a given
Page 81
Scope : homogeneity specification of a batch of containers for liquids from post-consumer of polyethylenterephtalate to be used to the production of recycled plastic materials from the selection on containers.
Relatedness :National : REV/AMD UNI 11038-1:2003
Subsector : N04 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1325C592/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C592Title : Plastics packaging from post-consumer selected as homogeneous fractions -
Assessment of conformity of the batch to the specification of homogeneity - Part 2: Polyethylene (PE) liquid container
Scope : The standard defines a method of sampling and of the assessment of conformity to a given homogeneity specification of a batch of containers for liquids from post-consumer of polyethylene to be used to the production of recycled plastic materials from the selection of containers.
Relatedness :National : REV/AMD UNI 11038-2:2003
** End of Subsector **
Subsector N05: TEXTILES.
Subsector : N05 Registration Date : 2010-02-12Organization : UNICountry : ItalyProject ID : 15210390/0001 Project EstablishedICS : 59.080.01National Ref : E15210390Title : Textiles - Test methods - Determination of metal contentScope : The objective of this standard is to determine the content of heavy metals in textile
products and it should consist of two parts concerning the determination of extractable metals and the determination of total metal content, respectively.
Relatedness :National : REV/AMD UNI 9148:1987, UNI 9147:1987 and UNI 9146:1987
** End of Subsector **
Subsector N06: RUBBER.
Subsector : N06 Registration Date : 2010-02-25Organization : UNICountry : ItalyProject ID : 35007040/0001 Project EstablishedICS : 83.060National Ref : U35007040Title : Elastomers - Tests on vulcanized rubbers - Determination of mass, volume and
dimensions variation of rubber products in static contact with water mixable and not liquids
Page 82
Scope : This standard specifies test methods for the determination of mass, volume and dimensions variation of rubber products in static contact with water mixable and not liquids.
Relatedness :National : REV/AMD UNI 8313:1993
Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA165825/0001 Project EstablishedICS :National Ref : PR XPT47-758Title : End of Life Tyres (ELF) - Determination of the textile content of granulates from grinding
process of End of Life Tyres - Method based on the manual separation after mechanical sieving of product
Relatedness :National : New
Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167122/0001 Project EstablishedICS :National Ref : PR NF G37-126Title : Rubber or plastic coated fabrics-Exposure to liquids by contact with one face
Relatedness :National : New
Subsector : N06 Registration Date : 2010-02-25Organization : AFNORCountry : FranceProject ID : FA167533/0001 Project EstablishedICS :National Ref : PR XP T47-760Title : End of life tyres (ELT) . Characterisation of products from primary shredding . Guidance
for a testing campaign
Relatedness :National : New
** End of Subsector **
Subsector N09: PLASTICS.
Subsector : N09 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 1308C820/0001 Project EstablishedICS : 23.040.01National Ref : E1308C820Title : Plastics piping systems - Fire protections valves
Page 83
Scope : The standard is related to the thermoplastic valves that are used in the fixed fire extinguishing systems. The standard specifies the minimum requirements that the valves shall satisfy and the installation modes. The valves are used to the followings conditions: maximum operational pressure PFA 16 bar, reference working temperatures 20 °C. The valves are of the following type: quarter of turn, sphere or butterfly.
Relatedness :National : REV/AMD
** End of Subsector **
Subsector N14: PLASTICS PIPES.
Subsector : N14 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-10Project ID : P0030594/0002 Draft for public enquiryICS :National Ref : PNE 53994Title : Plastics. Pipes and fittings made from unplastized poli(vinyl chlorhide) (PVC-U) and
polyethylene (PE) for building and civil engineering subsoil drainage.Scope : It applies to thermoplastics piping systems for civil engineering in order to collect and
transport surface and seepage water by gravity.
Relatedness :National : REV/AMD UNE 53994:2000 EX
** End of Subsector **
Subsector N99: UNDETERMINED.
Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N960/0001 Project EstablishedICS : 75.100National Ref : E0910N960Title : Cutting oils - Determination of pH in cutting oils miscible with waterScope : The determination of pH in cutting oils miscible with water is described.
Relatedness :National : REV/AMD UNI 10260:1993
Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N970/0001 Project EstablishedICS : 75.100National Ref : E0910N970Title : Cutting oils - Determination of boron in cutting oils miscible with water or soluble in
water by inductively coupled plasma atomic emission spectrometryScope : The determination of boron as water soluble compound in cutting oils soluble or
emulsifiable with water is described by inductively coupled plasma atomic emission spectrometry.
Page 84
Relatedness :National : REV/AMD UNI 10293:1994
Subsector : N99 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N980/0001 Project EstablishedICS : 75.100National Ref : E0910N980Title : Cutting oils - Determination of chlorine in cutting oils miscible or soluble in water by X
ray fluorescence spectrometryScope : The determination of chlorine in cutting oils soluble or emulsifiable with water by X ray
fluorescence spectrometry is described.
Relatedness :National : REV/AMD UNI 10471:1995
Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910N990/0001 Project EstablishedICS : 75.100National Ref : E0910N990Title : Cutting oils - Determination of phosphorus in cutting oils miscible or soluble in water by
inductively coupled plasma atomic emission spectrometryScope : The determination of phosphorus in cutting oils soluble or emulsifiable with water by
inductively coupled plasma atomic emission spectrometry is described.
Relatedness :National : REV/AMD UNI 10472:1995
Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O000/0001 Project EstablishedICS : 75.100National Ref : E0910O000Title : Cutting oils - Assessment of dynamic stability of cutting oils miscible with waterScope : The determination of tendency to form sludges in cutting oils miscible with water is
described.
Relatedness :National : REV/AMD UNI 10473:1995
Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O010/0001 Project EstablishedICS : 75.100National Ref : E0910O010Title : Cutting oils - Assessment of compatibility of cutting oils with rubber components
Page 85
Scope : Assessment of compatibility of cutting oils with different kinds of elastomers generally used in worker machines is described. The test allows to evaluate the mass and volume variations when elastomer plates are subjected to rapid ageing in contact with the test fluid.
Relatedness :National : REV/AMD UNI 10609:1997
Subsector : N99 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O020/0001 Project EstablishedICS : 75.100National Ref : E0910O020Title : Cutting oils - Determination of sulphurScope : The determination of sulphur in cutting oils by inductively coupled plasma atomic emission
spectrometry is described.
Relatedness :National : REV/AMD UNI 10684:1998
** End of Subsector **
** End of Sector **
Information procedure Page 86
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2010-03-05
Page 87Subsector S01: ACOUSTICS AND SOUND INSULATION.
Subsector : S01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 00100827/0001 Project EstablishedICS :National Ref : 00100827Title : Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation
method
Relatedness :National : New
Subsector : S01 Registration Date : 2010-02-23Organization : UNICountry : ItalyProject ID : 20001930/0001 Project EstablishedICS : 13.140National Ref : U20001930Title : Acoustics - Determination of occupational noise exposureScope : This standard provides a method to determine the occupational noise exposure in relation
to the noise-induced hearing impairment and the instruments to use with reference to Italian laws.
Relatedness :National : REV/AMD UNI 9432:2008
** End of Subsector **
Subsector S08: AIR QUALITY.
Subsector : S08 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0023258/0002 Draft for public enquiryICS :National Ref : PNE 171330-3Title : Indoor air quality. Part 3: Indoor air management systems.Scope : This standard specifies the indoor air management systems in order to certificate and audit
the indoor air quality inside a building.
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY.
Subsector : S09 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000036/0001 Project EstablishedICS :National Ref : BS XXXX
Page 88
Title : Water sampling for buildings. Heating and chilled water systems
Relatedness :National : New
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N530/0001 Project EstablishedICS : 13.060.50National Ref : E0910N530Title : Water quality - Determination of Chlorine dioxide - Colorimetric method with p-chloro
phenolScope : The standard specifies a UV-VIS spectrometric method for the determination of chlorine
dioxide in water.
Relatedness :National : REV/AMD UNI 9995:1992
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N550/0001 Project EstablishedICS : 13.060.20National Ref : E0910N550Title : Water intended for human consumption - Measurement of temperatureScope : The standard specifies a method for the measurement of temperature of water intended
for human consumption. The method is also usable for row waters intended for drinking water production.
Relatedness :National : REV/AMD UNI 10500:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N560/0001 Project EstablishedICS : 13.060.20National Ref : E0910N560Title : Water intended for human consumption - Determination of silica - Molybdenum blue
colorimetric methodScope : The standard specifies a method for the determination of silica content in water intended
for human consumption and in raw waters intended for dirinking water production.
Relatedness :National : REV/AMD UNI 10503:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N570/0001 Project EstablishedICS : 13.060.20
Page 89
National Ref : E0910N570Title : Water intended for human consumption - Determination of fixed residuum at 180 °C -
Gravimetric methodScope : The standard specifies a method for dry residue determination of water intended for
human consumption and also of surface and ground waters used for drinking water production.
Relatedness :National : REV/AMD UNI 10506:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N580/0001 Project EstablishedICS : 13.060.20National Ref : E0910N580Title : Water intended for human consumption - Determination of free carbon dioxide -
Acidimetric methodScope : The standard specifies a method for free carbon dioxide determination in drinking water or
in surface and ground waters intended for drinking water production. The method determines at the same time either the carbon dioxide balanced with HCO3- and CO3-- ions or the aggressive one. The method does not allow the direct determination the aggressive properties of water due to the carbon dioxide presence.
Relatedness :National : REV/AMD UNI 10507:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N591/0001 Project EstablishedICS : 13.060.50National Ref : E0910N591Title : Water quality - Determination of non ionic surfactants - Tetrakis Active Substances
method (TAS)Scope : The standard specifies a method for the determination of nonionic ethoxylated surfactants
dissolved in waters. The method can be used either for testing the possible contamination of surface waters or for monitoring the nonionics concentration of inlet and outlet water in a treatment plant.
Relatedness :National : REV/AMD UNI 10511-1:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N592/0001 Project EstablishedICS : 13.060.50National Ref : E0910N592Title : Water quality - Determination of non ionic surfactants - Potassium Picrate Spectrometric
method (PPAS)Scope : The standard specifies a method for the determination of nonionic ethoxylated surfactants
dissolved in drinking water, surface water, ground water, waste water or in water intended
Page 90
Scope : for drinking water production.
Relatedness :National : REV/AMD UNI 10511-2:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N600/0001 Project EstablishedICS : 13.060.50National Ref : E0910N600Title : Water quality - Determination of chlorite - Voltammetric methodScope : The standard specifies a method for the ion chlorite electrochemical determination in
surface water and in water intended for human consumption and also in waste water.
Relatedness :National : REV/AMD UNI 10841:1999
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N610/0001 Project EstablishedICS : 13.060.50National Ref : E0910N610Title : Water quality - Determination of volatile hydrocarbons (VOC) and volatile halogenated
hydrocarbons (VOX) - Method by solid-phase microextraction (SPME) and capillary gas-chromatography
Scope : The standard specifies a method for the VOC and VOX determination in drinking, surface, ground and low contaminated waste waters by solid phase microextraction (SPME) and capillary gas chromatography.
Relatedness :National : REV/AMD UNI 10899:2001
Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910N620/0001 Project EstablishedICS : 13.060.50National Ref : E0910N620Title : Water quality - Determination of nitrogenous (triazine) herbicides - Method by solid-
phase microextraction (SPME) and capillary gas-chromatographyScope : The standard specifies a method for the determination of triazinic herbicides by solid phase
microextraction (SPME) and capillary gas chromatography in drinking, surface and ground low contaminated waters.
Relatedness :National : REV/AMD UNI 10900:2001
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : Italy
Page 91
Project ID : 0910N630/0001 Project EstablishedICS : 13.060.50National Ref : E0910N630Title : Water quality - Determination of iron, manganese, nickel, copper, zinc, lead, cadmium
and cobalt - ICP-AES method, after preconcentration on chelating resinScope : The standard specifies a method for the determination of free iron, manganese, nickel,
copper, zinc, lead, cadmium and cobalt in low contaminated surface and ground waters.
Relatedness :National : REV/AMD UNI 10901:2001
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N640/0001 Project EstablishedICS : 13.060.20National Ref : E0910N640Title : Water intended for human consumption - Determination of antimony - Atomic absorption
spectrometric method by hydride generationScope : The standard specifies a method for the determination of total antimony in drinking water,
surface water, ground water and in water intended for drinking water production.
Relatedness :National : REV/AMD UNI 10556:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N650/0001 Project EstablishedICS : 13.060.20National Ref : E0910N650Title : Water intended for human consumption - Detection of bacteria referable to the genus
ShigellaScope : This standard defines a method for the detection of bacteria referable to the genus Shigella
in water intended for human consumption.
Relatedness :National : REV/AMD UNI 10679:1997
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N680/0001 Project EstablishedICS : 13.060.20National Ref : E0910N680Title : Water intended for human consumption - Detection of pathogenous staphylococciScope : This standard defines a method for the detection of pathogenous staphylococci in water
intended for human consumption. In waters intended for human consumption pathogenous staphylococci must be always absent. The detection of pathogenous staphylococci is important to define the potential pathogenicity and to represent an index of animal contamination.
Relatedness :
Page 92
National : REV/AMD UNI 10678:1998
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N690/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910N690Title : Water intended for human consumption - Determination of algal accessory pigments -
Chromatographic method HPLCScope : This standard defines a HPLC method for the determination of the content of algal
accessory pigments in water intended for human consumption.
Relatedness :National : REV/AMD UNI 10909:2001
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N700/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910N700Title : Water intended for human consumption - General guidance for microbiological
examinationsScope : This standard defines general indications to observe in microbiological tests in water
intended for human consumption.
Relatedness :National : REV/AMD UNI 10674:2002
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N920/0001 Project EstablishedICS : 13.060.50National Ref : E0910N920Title : Water quality - Determination of highly volatile halogenated and aromatic hydrocarbons
- Gas chromatographic analysis after purge und trap recovery techniqueScope : The standard specifies a method for the determination of highly volatile chlorinated and
aromatic hydrocarbons in ground, surface, swimming pool, and intended for human consumpion waters.
Relatedness :National : REV/AMD UNI 10833:1999
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N940/0001 Project EstablishedICS : 13.060.20National Ref : E0910N940Title : Water intended for human consumption - Determination of barium - Atomic absorption
Page 93
Title : spectrometric method with graphite furnaceScope : The standard specifies a method for the determination of barium in water intended for
human consumption using atomic absorption spectrometry with electrothermal atomization in a graphite furnace.
Relatedness :National : REV/AMD UNI 10547:1996
Subsector : S09 Registration Date : 2010-02-16Organization : UNICountry : ItalyProject ID : 0910N950/0001 Project EstablishedICS : 13.060.20National Ref : E0910N950Title : Water intended for human consumption - Determination of beryllium - Atomic absorption
spectrometric method with graphite furnaceScope : The standard specifies a method for the determination of beryllium in water intended for
human consumption using atomic absorption spectrometry with electrothermal atomization in a graphite furnace.
Relatedness :National : REV/AMD UNI 10548:1996
Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O590/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910O590Title : Water intended for human consumption - Detection of chlorophyll aScope : This standard specifies a method for the detection of chlorophyll a in water intended for
human consumption. Moreover, the standard permits to obtain a valuation of the feopigments using the artificial degradation of the chlorophyll contained in the examined sample adding hydrochloric acid.
Relatedness :National : REV/AMD UNI 11006:2002
Subsector : S09 Registration Date : 2010-02-19Organization : UNICountry : ItalyProject ID : 0910O600/0001 Project EstablishedICS : 07.100.20, 13.060.20National Ref : E0910O600Title : Water intended for human consumption - Detection of helminthesScope : This standard defines a method for the detection of helminthes in water intended for
human consumption. Water samples are analysed by a microporous membrane filtration technique or by a sedimentation with Imhoff funnels. After microscopic observation, the identification of helminthes is based on morphological aspects.
Relatedness :National : REV/AMD UNI 11005:2002
Page 94
** End of Subsector **
Subsector S16: AIDS FOR THE DISABLED.
Subsector : S16 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 05300324/0001 Project EstablishedICS :National Ref : 05300324Title : Ramps installed on vehicles for wheelchair users and for people restricted in their
mobility - Safety requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector S26: ENVIRONMENTAL MANAGEMENT
Subsector : S26 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000259/0001 Project EstablishedICS :National Ref : BS 8905Title : Guidance on the sustainable use of materials
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED.
Subsector : S99 Registration Date : 2010-02-22Organization : SUTNCountry : SlovakiaProject ID : 75001110/0001 Project EstablishedICS :National Ref : STN 75 0190Title : Water resources. Climatology. Terminology
Relatedness :National : REV/AMD STN 75 0190
Subsector : S99 Registration Date : 2010-02-08Organization : AENORCountry : Spain Latest Date for Comments : 2010-03-20Project ID : P0031613/0002 Draft for public enquiryICS :National Ref : PNE 179003Title : Health services. Risk management for patient safety.
Page 95
Scope : This standard establishes a methodology for risk management of patient safety.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 96
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2010-03-05
Page 97Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES.
Subsector : T01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 13202230/0001 Project EstablishedICS :National Ref : 13202230Title : Ships and marine technology - Round or spiral plated man-made fibre ropes
Relatedness :National : New
Subsector : T01 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 13202231/0001 Project EstablishedICS :National Ref : 13202231Title : Fibre ropes - Splices - Definitions, safety requirements, test method
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE.
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000027/0001 Project EstablishedICS :National Ref : BS 2HR 209Title : Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting
alloy plate, sheet and strip. (Ni base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000028/0001 Project EstablishedICS :National Ref : BS 2HR 240Title : Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate,
sheet and strip. (Cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01
Page 98
Organization : BSICountry : United KingdomProject ID : 01000029/0001 Project EstablishedICS :National Ref : BS 3HR 401Title : Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless
tubes. (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000030/0001 Project EstablishedICS :National Ref : BS 2HR 402Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy
seamless tubes. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000031/0001 Project EstablishedICS :National Ref : BS 2HR 403Title : Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes. (Nickel
base, Cr 19.5, Ti 0.4)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000032/0001 Project EstablishedICS :National Ref : BS 2HR 404Title : Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting
alloy seamless tubes. (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000181/0001 Project EstablishedICS :
Page 99
National Ref : BS 3HR 501Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold
drawn wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000182/0001 Project EstablishedICS :National Ref : BS 3HR 502Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold
drawn and solution treated wire for springs. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000183/0001 Project EstablishedICS :National Ref : BS 3HR 503Title : Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for
thread inserts. (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)(0.45 mm to 2 mm diameter)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000184/0001 Project EstablishedICS :National Ref : BS 3HR 504Title : Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets.
(Maximum diameter or minor sectional dimension 20 mm)(Nickel base, Cr 19.5, Ti 0.4)
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000265/0001 Project EstablishedICS :National Ref : BS 3L 500Title : Procedure for inspection, testing and acceptance of wrought magnesium-base alloys
Page 100
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000266/0001 Project EstablishedICS :National Ref : BS 5L 100Title : Procedure for inspection, testing and acceptance of wrought aluminium and aluminium
alloys
Relatedness :National : New
Subsector : T02 Registration Date : 2010-02-01Organization : BSICountry : United KingdomProject ID : 01000267/0001 Project EstablishedICS :National Ref : BS 5L 101Title : Procedure for inspection, testing and acceptance of aluminium-base and magnesium-
base ingots and castings
Relatedness :National : New
** End of Subsector **
Subsector T03: ROAD VEHICLES.
Subsector : T03 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00023015/0001 Project EstablishedICS :National Ref : ONR 225007Title : Electrically propelled road vehicles - Survey of standards and specificationScope : This ON-rule facilitates the correct selection of standards and specifications for electrically
propelled road vehicles (electric vehicles).
Relatedness :National : New
Subsector : T03 Registration Date : 2010-02-12Organization : UNI Draft Issue Date : 2009-11-10Country : Italy Latest Date for Comments : 2009-12-22Project ID : 0322A420/0001 Project EstablishedICS : 43.040.50, 83.160.10National Ref : E0322A420Title : Road vehicles - Supplementary grip devices for tyres of motor vehicles of category M1,
N1, O1, O2 - Safety requirements and test methods
Page 101
Scope : This standard specifies safety and performance requirements for supplementary grip devices, commonly called “snow chains”, intended to be fitted on tyres of passenger cars and light duty vehicles.
Relatedness :National : REV/AMD UNI 11313:2009
Subsector : T03 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 05202436/0001 Project EstablishedICS :National Ref : 05202436Title : Clutch facings; dimensions and tolerances
Relatedness :National : New
** End of Subsector **
Subsector T14: PACKAGING.
Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022974/0001 Project EstablishedICS :National Ref : ÖNORM A 5432Title : Determination of maximum heights for unit loadsScope : This Austrian Standard is applicable for the determination of maximum heights for unit
loads.
Relatedness :National : New
Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : AustriaProject ID : 00022975/0001 Project EstablishedICS :National Ref : ÖNORM A 5470-1Title : Packaging - General technical terms of delivery and supply - Part 1: BasicsScope : This Austrian Standard is applicable for the provision of samples, zeros series and serial
production of packaging materials, packaging means, packaging aids, packages and packagings.
Relatedness :National : New
Subsector : T14 Registration Date : 2010-02-15Organization : ASICountry : Austria
Page 102
Project ID : 00022976/0001 Project EstablishedICS :National Ref : ÖNORM A 5471Title : Packaging - Special technical terms of delivery and supply - LayoutScope : This Austrian Standard is applicable for the layout of special technical terms of delivery and
supply (STLB) in the area of packaging.
Relatedness :National : New
** End of Subsector **
Subsector T20: TRAM- AND RAILWAY ENGINEERING.
Subsector : T20 Registration Date : 2010-02-11Organization : DINCountry : GermanyProject ID : 08700649/0001 Project EstablishedICS :National Ref : 08700649Title : Design guide for railway vehicles and their components - Bolted joints - Part 2: Design -
Mechanical application
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 103
Monthly Notifications Register
Notifications registered at CMC from 2010-02-01 to 2010-02-28
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2010-03-05
Page 104Subsector Z99: UNDETERMINED.
Subsector : Z99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 14J1G440/0001 Project EstablishedICS : 35.020National Ref : E14J1G440Title : Technical Specifications for secure and reliable electronic information preservation
systemsScope : In the light of EU-wide implementation of Directive 2006/123/EC, art. 26 EUMS are required
to “take accompanying measures to encourage providers to take action on a voluntary basis in order to ensure the quality of service provision”. This will be accomplished through certification, assessment or by means of quality charters. Among the service providers addressed by this Directive are doubtlessly also Information Preservation Service Providers. Additionally, Directive 95/46 art. 17(2) states: “The Member States shall provide that the controller must, where processing is carried out on his behalf, choose a processor providing sufficient guarantees in respect of the technical security measures and organizational measures governing the processing to be carried out, and must ensure compliance with those measures.” The purpose is to deliver a consistent set of Information Preservation related requirements in order to assure an even assessment level throughout the EU based on EU-wide applicable criteria.
Relatedness :National : REV/AMD
Subsector : Z99 Registration Date : 2010-02-22Organization : UNICountry : ItalyProject ID : 14J1G450/0001 Project EstablishedICS : 03.080.99, 35.020National Ref : E14J1G450Title : Interpretation guidelines for ISO/IEC 20000-1Scope : Any standard, whilst attentively written, always is affected by interpretation ambiguity;
specially in the early phases of presentation and first application. This situation characterizes also ISO/IEC 20000 family standard. A possible interpretation ambiguity can lead to undesired or dangerous situations, like: a not unified use of the same standard; a lack in confidence and related qualitative value of the same standard for interested parties; this leading to a real risk of a misuse for certifications not supported by real value in business; difficulties applying the standard, due to interpretation efforts. The "interpretation guidelines for ISO/IEC 20000-1" are not intended to modify at all the original contents they refer to, but only explain the meaning of some specific wording or topics, where the authors found themselves real difficulty in finding a common sense in interpretation or thinking to the possible application.
Relatedness :National : REV/AMD
** End of Subsector **
** End of Sector **