monofolhas catalogo 2015 - · PDF fileRF FMF SA WITHOUT FABRIC WITH FABRIC MABS Perforated...
Transcript of monofolhas catalogo 2015 - · PDF fileRF FMF SA WITHOUT FABRIC WITH FABRIC MABS Perforated...
SAFMFRF
WITHOUT FABRIC
WITH FABRIC
MABS Perforated with fabric
Image of 60x60cm models Ref.: (perforated with black fabric), the new and BAL060 fabric (Red),Ref.:BAL060 and Ref.:BAM060 Ref.:BAL060 fabric applied (ambient image).BAL060sc, the BAL200.4 (plate with fabric)
®BASMEL is a low-cost acoustic panel to be applied in large quantities on ceilings and walls.
He is made of flexible open-cell melamine resin foam or of regular Acoustic Foam, a thermoset polymer and a fire-resistant fabric-finishing surface. The sound waves penetrate the open-cell structure, thus reducing the reflected energy and giving this product an excellent sound absorption capacity.
There are two available options; one flat (BAL060/120) and another one perforated (MABS ®060) with the same pattern from the COSMOS model. This product is available with a fabric
cover and a simpler version without the fabric finishing.
Is available with self-adhesive on the back which allows a very fast and easy installation. To conceal the union between the panels, we also have, as an option, a roll of fabric adhesive tape that can be applied.
®The BASMEL ’s acoustic and safety characteristics make this product ideal for use as a noise control and sound insulation device in buildings that have demanding requirements against fire. It improves acoustics and soundproofing, thereby providing safety in accordance with environmental standards.
FEATURES
2 2• NRC: 0.80/m (40mm), 0.54/m (20mm).• Raw material: melamine resin or standard acoustic foam. • MELAMIN RESIN - Flame resistance: Germany B1, France M1, GB class1, USA V0/HF1.• ACOUSTIC FOAM - Self-extinguishable M1 fire-retardant foam.• Good thermal insulation properties humidity tolerance.• Constant physical properties over a wide temperature range.• Resistance to all organic solvents.• Package: 8 units. • Mounting glue and FABRIC ADHESIVE FINISHING TAPE sold separately.
• SELF-ADHESIVE option available on request.
DESCRIPTION
®BASMELABSORBENT PANEL
ABSORPTION COEFFICIENT
TECHNICAL DRAWINGS
IMPORTANT NOTICES
®• JOCAVI accepts no responsibility for any printing errors. Specifications can be modified without prior notice, if technical or commercial reasons so require.
©• RAL is an international independent colour standard system par tner for industry, trade, architecture and design. Should be consulted before placing any order.• The colours shown on this catalogue are only a reference and an illustration of the products finishing. The colours shown are not binding because brightness, contrast and colour balance may vary due to the printing process.• Colours may vary due to raw-material suppliers' changes and some differences may occur in tonal range.
®• Typical Indoor Comfor t Standards state a temperature range of 20ºC - 27ºC (68ºF - 81ºF), and a relative humidity of less than 60%. These would be considered as normal operational levels of JOCAVI products' range.• Despite all the standard sizes of all products, this model can be customised upon previous consultation. Sizes may vary slightly due to their production method and some inherent raw-materials characteristics.
50 63 80 100 125 160 200 250 315 400 500 630 800 1k 1.25k 1.6k 2k 2.5k 3.15k 6.3k 8k 10kHz 5k 4k
0.01 0.02 0.04 0.06 0.10 0.17 0.29 0.39 0.51 0.63 0.83 0.90 0.94 0.97 0.96 0.95 0.93 0.93 0.98 0.96 0.97 0.88 0.780.97 0.96
Values [<100Hz and > 5K] are Non Standard Values.ABSORPTION COEFFICIENT: Values in accordance with the standards: EN 20654, ASTM C423 and EN 11654.
0.2
0.4
0.6
0.8
1.0
1.2
1.4
áS
NRC
REGULAR AND MELAMINE FOAM COLOURSSTANDARD FABRIC COLOURS
BEIG
ESi
mila
r to
RAL
1011
YELL
OW
Sim
ilar t
o RA
L 10
03
ORA
NG
ESi
mila
r to
RAL
2001
PURP
LESi
mila
r to
RAL
4007
BLU
ESi
mila
r to
RAL
5013
BRO
WN
Sim
ilar t
o RA
L 80
19
GRE
ENSi
mila
r to
RAL
6028
GRE
YSi
mila
r to
RAL
7015
BLAC
KSi
mila
r to
RAL
9005
RED
Sim
ilar t
o RA
L 30
03
WH
ITE
Sim
ilar t
o RA
L 90
03 WHITEMelamin Foam
BTEC G
LIGHT GREYMelamin Foam
BTEC G
GREYAcoustic Foam
FR 25
LIG
HT
BLUE
Sim
ilar t
o RA
L 50
10
LIG
HT G
REY
Sim
ilar t
o RA
L 70
01
SELF-ADHESIVE
FABRIC ADHESIVE TAPE
*PANEL DATA ONLY OF REF.: BAL060
®
BA
SMEL
| A
BSO
RBEN
T PA
NEL
SIDE COVERERED fabric
SIDE COVER
PLATE with fabric
MODELS AND SIZES
MODELS SIZES WEIGHTFRFMF
120x60x4 0.60/0.44
60x60x4 0.30/0.22
200x120x4 2.24/1.52
200x120x2 1.48/0.76
BAL120sc 120x60x8 0.62/0.46
BAL060sc
Fabric Tape
BAL120
BAL060
BAL200.4
BAL200.2
MABS60
X X X X X
X X X X X
X X X X X
X X
X X
X X X X X
X X X X X
60x60x8 0.31/0.23
60x60x4cm 0.21
500x3cm
Self-AdhesiveFabric MFRegular Foam (cm) (Kg)Fabric RFMelamine Foam
60
120
2/4/6/8
60
200
BAL200.4BAL200.2
BAL120BAL120sc
BAL060BAL sc060
MABS060