MONObox™ Carson - Cubis Systems...MONObox Carson is manufactured in nitrogen-foamed High Density...
2
Materials HDPE MONObox™ Carson is manufactured in nitrogen- foamed High Density Polyethylene (HDPE), of which up to 70% is recycled material. HDPE possesses excellent strength to weight properties. Cubis Systems, 4 Silverwood Ind Estate, Lurgan, Co. Armagh, BT66 6LN, UK +44 (0)28 38 313 100 | www.cubis-systems.com | [email protected] MONObox™ Carson Carson Valve Box The most specified valve box in the world The Carson Valve Box range has been used extensively for housing irrigation valve equipment and has a wide range of sizes to accommodate the requirements of the industry. Flexible During Installation Chambers can be adapted to suit on-site conditions with standard tools to overbuild over existing networks, Introduce duct entries for cable entry and for top-section fine adjustment All Weather Construction Unlike with brick-built chambers where freezing temperatures can stop work, Quad can be installed in all types of weather. Complete System Offering ‘Drop in’ HDPE covers (rated to 1.5T loading) - meaning no frame is required. Concrete Infill and Ductile Iron B125 access cover options are also available. High Strength to Weight Ratio The material is significantly lighter than other conventional materials that can provide the same inherent strength. Load Rating MONObox™ Carson is suitable for installation in environments rated to B125 under EN124. Suitable for footways, pedestrian areas and comparable areas, car parks or parking decks. Fast & Easy to Install MONObox™ chambers are significantly faster to install than conventional alternatives, with complete installations typically taking up to one hour. This results in reduced costs for the installer. No specialist equipment or plant is required in order to install the chamber and there is no need for specialist box builders.
Transcript of MONObox™ Carson - Cubis Systems...MONObox Carson is manufactured in nitrogen-foamed High Density...
MaterialsHDPEMONObox™ Carson is manufactured in nitrogen-foamed High Density Polyethylene (HDPE), of which up to 70% is recycled material. HDPE possesses excellent strength to weight properties.
Cubis Systems, 4 Silverwood Ind Estate, Lurgan, Co. Armagh, BT66 6LN, UK+44 (0)28 38 313 100 | www.cubis-systems.com | [email protected]
MONObox™ Carson
Carson Valve BoxThe most specifiedvalve box in the world
The Carson Valve Box range has been used extensively for housing irrigation valve equipment and has a wide range of sizes to accommodate the requirements of the industry.
Flexible During InstallationChambers can be adapted to suit on-site conditions with standard tools to overbuild over existing networks, Introduce duct entries for cable entry and for top-section fine adjustment
All Weather ConstructionUnlike with brick-built chambers where freezing temperatures can stop work, Quad can be installed in all types of weather.
Complete System Offering‘Drop in’ HDPE covers (rated to 1.5T loading) - meaning no frame is required. Concrete Infill and Ductile Iron B125 access cover options are also available.
High Strength to Weight RatioThe material is significantly lighter than other conventional materials that can provide the same inherent strength.
Load RatingMONObox™ Carson is suitable for installation in environments rated to B125 under EN124. Suitable for footways, pedestrian areas and comparable areas, car parks or parking decks.
Fast & Easy to InstallMONObox™ chambers are significantly faster to install than conventional alternatives, with complete installations typically taking up to one hour. This results in reduced costs for the installer. No specialist equipment or plant is required in order to install the chamber and there is no need for specialist box builders.
MONObox™ Carson
Size Chart
Security• HDPE covers (with the exception of the Circular 6’) are equipped with hexagonal head bolts• Anti-vandalism Penta head bolts available on request
MONObox™ Carson can be supplied with the following accessories
Drainage Grates
Bottom Plates
Artificial Grass Cover
Concrete Infill & Ductile Iron Covers
Available SizesThe MONObox™ Carson range encompasses rectangular and circular chambers available in a wide range of shapes and sizes. The rectangular boxes are available in 6 types with of clear opening options, with the circular chambers providing two options. A range of HDPE covers and security options are available across each range.
Circular 6’ Circular 10’
Standard & Extension Jumbo & Extension Super Jumbo Maxi Jumbo
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
The most specified valve box in the world
Carson Valve BoxProduct Guide:
A range of valve boxes, injection moulded in • structural foam High Density PolytehyleneLockable covers available in HDPE, Concrete-• Infill and Ductile Iron
In brief
30 million boxes installed since 1969.. and • counting!Very strong - up to 12.5 tonnes vertical • loadingLightweight and easy to handle• HDPE covers ‘drop in’ - no frame required• Security options to prevent unauthorised • accessUV stabile for long life and performance• Available with or without pre-drilled holes • for pipe accessUsed by golf courses, municipalities and • anywhere a quality product is requiredThe preferred option, worldwide•
Circular 6’ Circular 10’
MAXI JUMBOSUPER JUMBOJUMBOSTANDARD
Previously known as • the Carson box
Cubis Systems, 4 Silverwood Ind Estate, Lurgan, Co. Armagh, BT66 6LN, UK+44 (0)28 38 313 100 | www.cubis-systems.com | [email protected]
Top Dimensions Bottom Dimensions Loadresistance
HDPEcover
Internal External Internal ExternalHeight Length Width Length Width Length Width Length Width
Circular mm mm mm mm mm
708-6 6’ 230 150 160 195 205
910-10 10’ 265 240 250 300 335 1.5T
Rectangular mm mm mm mm mm
1419-12 Standard 310 395 265 435 300 500 360 540 400 1.5T
1419-6 Extension 170 395 265 430 300 435 305 480 350 1.5T
1220-12 Jumbo 315 505 340 545 380 610 430 660 480 1.5T
1220-6 Extension 180 510 340 545 390 570 400 610 440
1324-15 Super Jumbo 390 600 355 645 400 760 575 835 590 1.5T
1730-18 Maxi Jumbo 465 780 450 825 495 955 625 1030 695 1.5T
