Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit...

4
CAT.200.01.T.E For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog 12-21 January 2001 Molded Case Circuit Breakers 12 10 – 225 Amperes F-Frame Vol. 1, Ref. No. [0487] Product Selection Table 12-33. Types ED, EDH, and EDC Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Suitable for Reverse Feed Note: Instruction Leaflet/FRED Number 29C101 Table 12-34. Type EHD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units 1 Not UL listed. 5 kAIC interrupting rating. 2 UL listed for SWD applications, see NEC Article 240-83 (d). Note: Instruction Leaflet/FRED Number 29C101 Maximum Continuous Ampere Rating @ 40°C 240V AC Maximum, 125V DC (Includes Terminals on Load End Only) 65 kAIC @ 240V AC 100 kAIC @ 240V AC 200 kAIC @ 240V AC Type ED Type EDH Type EDC Current Limiting 2-Pole 3-Pole 2-Pole 3-Pole 2-Pole 3-Pole Catalog Number Price U.S. $ Catalog Number Price U.S. $ Catalog Number Price U.S. $ Catalog Number Price U.S. $ Catalog Number Price U.S. $ Catalog Number Price U.S. $ 100 125 150 175 200 225 ED2100 ED2125 ED2150 ED2175 ED2200 ED2225 357. 357. 357. 357. 357. 357. ED3100 ED3125 ED3150 ED3175 ED3200 ED3225 885. 885. 885. 885. 885. 885. EDH2100 EDH2125 EDH2150 EDH2175 EDH2200 EDH2225 850. 850. 850. 850. 850. 850. EDH3100 EDH3125 EDH3150 EDH3175 EDH3200 EDH3225 1,280. 1,280. 1,280. 1,280. 1,280. 1,280. EDC2100 EDC2125 EDC2150 EDC2175 EDC2200 EDC2225 1,200. 1,200. 1,200. 1,200. 1,200. 1,200. EDC3100 EDC3125 EDC3150 EDC3175 EDC3200 EDC3225 1,655. 1,655. 1,655. 1,655. 1,655. 1,655. Maximum Continuous Ampere Rating @ 40°C 277V AC Maximum, 125V DC 480V AC Maximum, 250V DC 14 kAIC @ 277V AC 14 kAIC @ 480V AC Type EHD (Includes Terminals on Load End Only) 1-Pole 2-Pole 3-Pole Catalog Number Price U.S. $ Catalog Number Price U.S. $ Catalog Number Price U.S. $ 10 1 15 20 25 30 35 40 45 50 60 70 80 90 100 EHD1010 EHD1015 2 EHD1020 2 EHD1025 EHD1030 EHD1035 EHD1040 EHD1045 EHD1050 EHD1060 EHD1070 EHD1080 EHD1090 EHD1100 123. 123. 123. 123. 123. 123. 123. 123. 123. 123. 238. 239. 238. 238. EHD2010 EHD2015 EHD2020 EHD2025 EHD2030 EHD2035 EHD2040 EHD2045 EHD2050 EHD2060 EHD2070 EHD2080 EHD2090 EHD2100 387. 387. 387. 387. 387. 387. 387. 387. 387. 387. 505. 505. 505. 505. EHD3010 EHD3015 EHD3020 EHD3025 EHD3030 EHD3035 EHD3040 EHD3045 EHD3050 EHD3060 EHD3070 EHD3080 EHD3090 EHD3100 498. 498. 498. 498. 498. 498. 498. 498. 498. 498. 600. 600. 600. 600. Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . CB-2

Transcript of Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit...

Page 1: Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit Breakers 12 10 – 225 Amperes F-Frame Vol. 1, Ref. No. [0487] Product Selection Table

CAT.200.01.T.E For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog

12-21January 2001

Molded Case Circuit Breakers

12

10 – 225 AmperesF-Frame

Vol. 1, Ref. No. [0487]

Product SelectionTable 12-33. Types ED, EDH, and EDC Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Suitable for Reverse Feed

Note: Instruction Leaflet/FRED Number 29C101

Table 12-34. Type EHD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units

1 Not UL listed. 5 kAIC interrupting rating.2 UL listed for SWD applications, see NEC Article 240-83 (d).

Note: Instruction Leaflet/FRED Number 29C101

MaximumContinuousAmpereRating@ 40°C

240V AC Maximum, 125V DC (Includes Terminals on Load End Only)

65 kAIC @ 240V AC 100 kAIC @ 240V AC 200 kAIC @ 240V AC

Type ED Type EDH Type EDC Current Limiting

2-Pole 3-Pole 2-Pole 3-Pole 2-Pole 3-Pole

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

100125150175200225

ED2100ED2125ED2150ED2175ED2200ED2225

357.357.357.357.357.357.

ED3100ED3125ED3150ED3175ED3200ED3225

885.885.885.885.885.885.

EDH2100EDH2125EDH2150EDH2175EDH2200EDH2225

850.850.850.850.850.850.

EDH3100EDH3125EDH3150EDH3175EDH3200EDH3225

1,280.1,280.1,280.1,280.1,280.1,280.

EDC2100EDC2125EDC2150EDC2175EDC2200EDC2225

1,200.1,200.1,200.1,200.1,200.1,200.

EDC3100EDC3125EDC3150EDC3175EDC3200EDC3225

1,655.1,655.1,655.1,655.1,655.1,655.

MaximumContinuousAmpere Rating@ 40°C

277V AC Maximum, 125V DC 480V AC Maximum, 250V DC

14 kAIC @ 277V AC 14 kAIC @ 480V AC

Type EHD (Includes Terminals on Load End Only)

1-Pole 2-Pole 3-Pole

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

10 1 15 20 25 30 35 40 45 50 60 70 80 90100

EHD1010EHD1015 2

EHD1020 2

EHD1025EHD1030EHD1035EHD1040EHD1045EHD1050EHD1060EHD1070EHD1080EHD1090EHD1100

123.123.123.123.123.123.123.123.123.123.238.239.238.238.

EHD2010EHD2015EHD2020EHD2025EHD2030EHD2035EHD2040EHD2045EHD2050EHD2060EHD2070EHD2080EHD2090EHD2100

387.387.387.387.387.387.387.387.387.387.505.505.505.505.

EHD3010EHD3015EHD3020EHD3025EHD3030EHD3035EHD3040EHD3045EHD3050EHD3060EHD3070EHD3080EHD3090EHD3100

498.498.498.498.498.498.498.498.498.498.600.600.600.600.

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . CB-2

TAB1201.fm Page 21 Wednesday, October 25, 2000 9:37 PM

Page 2: Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit Breakers 12 10 – 225 Amperes F-Frame Vol. 1, Ref. No. [0487] Product Selection Table

12-20

For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog CAT.200.01.T.E

January 2001

Molded Case Circuit Breakers

12

10 – 225 AmperesF-Frame

Vol. 1, Ref. No. [0486]

Dimensions/WeightsTable 12-30. Dimensions in Inches (mm) Table 12-31. Approximate Shipping Weight, Lbs. (Kg)

Product SelectionThis information is presented only as an aid to understanding Catalog Numbers. It is not to be used to build Catalog Numbers for circuit breakers or trip units.

Table 12-32. Circuit Breaker Catalog Numbering System

Number of Poles

Width Height Depth

12

1.375 (35)2.75 (70)

6 (152)6 (152)

3.375 (86)3.375 (86)

34

4.125 (105)5.5 (140)

6 (152)6 (152)

3.375 (86)3.375 (86)

Breaker Type Number of Poles

1 2 3 4

ED, EDH, EDC — 3 (1.361) 4.5 (2.041) —

EHD, FDB, FD, HFD, FDC 2 (.907) 3 (1.361) 4.5 (2.041) 6 (2.721)

Circuit Breaker Type

EHDFDBFDHFDFDC

Number of Poles

1 = 1 Pole2 = 2 Poles3 = 3 Poles4 = 4 Poles

Trip Amperes

010015020025030035040045050060070080090100110125150175 (FD, HFD, FDC, 2-, 3-, 4-Pole Only)200 (FD, HFD, FDC, 2-, 3-, 4-Pole Only)225 (FD, HFD, FDC, 2-, 3-, 4-Pole Only)

Suffix

E = 100% Protected (4-Pole only) Neutral PoleEH = 50% Protected (4-Pole only)K = High Magnetic Molded Case SwitchL = Line and Load TerminalsS = Stainless Steel TerminalsV = 50°C CalibrationW = Without TerminalsY = Line Terminals OnlyZ = Aluminum Terminals (≤ 100 Amperes)

F D C 3 1 0 0 L

E D C 3 2 0 0 L

Circuit Breaker Type

EDEDHEDC

Number of Poles

2 = 2-Pole3 = 3-Pole

Trip Amperes

100125150175200225

Suffix

L = Line and Load TerminalsW = Without TerminalsY = Line Terminals OnlyZ = Aluminum Terminals (100 Amperes)

TAB1201.fm Page 20 Wednesday, October 25, 2000 9:37 PM

Page 3: Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit Breakers 12 10 – 225 Amperes F-Frame Vol. 1, Ref. No. [0487] Product Selection Table

12-170

For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog CAT.200.01.T.E

January 2001

Molded Case Circuit Breakers

12

Internal AccessoriesShunt Trip

Vol. 1, Ref. No. [0636]

Table 12-335. G-Frame Shunt Trip (LH 3-Pole only)

Note: Instruction Leaflet/FRED Number 15550

Note: G-Frame circuit breakers are factory sealed. Underwriters Laboratories requires that internal accessories be installed at the factory.Internal accessories are UL listed for factory installation under E7819.

Where local codes and standards permit and UL listing is not required, internal accessories can be field installed. Accessory installation should be done before the circuit breaker is mounted and connected.

Table 12-336. E125 Shunt Trip

1 Suitable for use in ground fault applications.Note: Instruction Leaflet/FRED Number 29C152

Table 12-337. F-Frame Shunt Trip

2 Not listed with Underwriters Laboratories, for field installation.3 Pigtail wire size: 18 AWG (0.82 mm2).4 Standard pigtail lead exit location.5 120V AC marked suitable for ground fault protection devices.6 Standard mounting location.7 Not for use on 4-pole circuit breakers.Note: Instruction Leaflet/FRED Number 29C140

Table 12-338. J250 Shunt Trip

8 Suitable for use in ground fault applications.Note: Instruction Leaflet/FRED Number 29C152

Electrical Ratings CatalogNumber

PriceU.S. $

Suffix Number

AdderU.S. $Volts Frequency Amp

120240122424

50/60 Hz50/60 HzDCDC60 Hz

1.12.12.85.7–

1373D62G011373D62G021373D62G151373D62G161373D62G20

489.489.489.489.489.

S1S2S3S4S7

489.489.489.489.489.

Electrical Ratings CatalogNumber

PriceU.S. $Volts Frequency Hz

12 – 60110 – 240 1380 – 600

50/60, DC50/60, DC50/60

SNT060CPKSNT120CPKSNT480CPK

489.489.489.

Voltage Rating (AC Frequency = 50/60 Hz)

Factory Mounted Field Mounted

Connection Type and Location Field Installation Kits 2

18-Inch (457.2 mm) Pigtail Leads 3 Terminal Block Pigtail Leads Terminal Block

Same Side Rear 4 Opposite Side Same Side

Suffix Number

AdderU.S. $

Suffix Number

AdderU.S. $

Suffix Number

AdderU.S. $

Suffix Number

AdderU.S. $

Catalog Number

PriceU.S. $

Catalog Number

PriceU.S. $

Left-Pole Mounting AC/DC Ratings 12 – 24V AC or DC48 – 127V AC or 48 – 60V DC 5

208 – 380V AC or 110 – 127V DC415 – 600V AC or 220 – 250V DC

S01S05S09S13

489.489.489.489.

S02S06S10S14

489.489.489.489.

S03S07S11S15

489.489.489.489.

S04S08S12S16

489.489.489.489.

SNT1LP03KSNT1LP08KSNT1LP12KSNT1LP18K

489.489.489.489.

SNT1LT03KSNT1LT08KSNT1LT12KSNT1LT18K

489.489.489.489.

Right- or Neutral-Pole Mounting AC/DC Ratings 6

12 – 24V AC or DC48 – 127V AC or 48 – 60V DC 5

208 – 380V AC or 110 – 127V DC415 – 600V AC or 220 – 250V DC

S17S21S25S29

489.489.489.489.

S18S22S26S30

489.489.489.489.

S19S23S27S31

489.489.489.489.

S20S24S28S32

489.489.489.489.

SNT1RP03KSNT1RP08KSNT1RP12KSNT1RP18K

489.489.489.489.

SNT1RT03K 7

SNT1RT08K 7

SNT1RT12K 7

SNT1RT18K 7

489.489.489.489.

Electrical Ratings CatalogNumber

PriceU.S. $Volts Frequency Hz

12 – 60110 – 240 8380 – 600

50/60, DC50/60, DC50/60

SNT060CPKSNT120CPKSNT480CPK

489.489.489.

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CB-2

TAB1206.fm Page 170 Wednesday, October 25, 2000 9:26 PM

Page 4: Molded Case Circuit Breakers 12-21 10 – 225 Amperes · 2015-07-15 · Molded Case Circuit Breakers 12 10 – 225 Amperes F-Frame Vol. 1, Ref. No. [0487] Product Selection Table

CAT.200.01.T.E For more information contact Cutler-Hammer at: www.ch.cutler-hammer.com/catalog

12-19January 2001

Molded Case Circuit Breakers

12

10 – 225 AmperesF-Frame

Vol. 1, Ref. No. [0485]

ContentsDescription Page

Product Description . . . . . . . . 12-19

Technical Dataand Specifications . . . . . . . . 12-19

Dimension/Weights . . . . . . . . 12-20

Product Selection . . . . . . . . . . 12-20

F-Frame

Typical F-Frame Breaker

Product Description■ All F-Frame Circuit Breakers are

HACR rated.■ All circuit breakers 10 through

50 amperes are suitable for HID (high intensity discharge) use.

■ All F-Frame circuit breakers are suitable for reverse feed use.

Technical Data and SpecificationsTable 12-28. UL489 Interrupting Capacity Ratings

1 DC ratings apply to substantially non-inductive circuits.2 2-pole circuit breaker, or two poles of 3-pole circuit breaker.3 Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA.

Table 12-29. IEC 157-1 (P1) Interrupting Capacity Ratings (P1)

4 DC ratings apply to substantially non-inductive circuits.5 2-pole circuit breaker, or two poles of 3-pole circuit breaker.6 Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 22 kA.

Circuit Breaker Type

Number of Poles

Interrupting Capacity (Symmetrical Amperes) (kA)

Volts AC (50/60 Hz) Volts DC 1

240 277 480 600 125 250 23

ED EDH EDC

2, 3 2, 3 2, 3

65 100200

———

———

———

101010

———

EHD 12, 3

—18

14—

—14

——

10—

—10

FDB 2, 3, 4 18 — 14 14 — 10

FD 12, 3, 4

—65

25—

—25

—18

10—

—10

HFD 12, 3, 4

—100

65—

—65

—25

10—

—22

FDC 2, 3, 4 200 — 100 35 — 22

Circuit Breaker Type

Number of Poles

Interrupting Capacity (Symmetrical Amperes) (kA)

Volts AC (50/60 Hz) Volts DC 4

220, 240 380, 415 440 500 125 250 56

ED EDH EDC

2, 32, 32, 3

65100200

———

———

———

101010

———

FDB 2, 3, 4 18 14 14 14 — 10

FD 12, 3, 4

25 65

—35

—35

—18

10—

—10

HFD 12, 3, 4

65 100

—65

—65

—25

10—

—22

FDC 2, 3, 4 200 100 100 35 — 22

TAB1201.fm Page 19 Wednesday, October 25, 2000 9:37 PM