Mold Chart Anterior and Posterior Hardened Plastic Teeth€¦ · newest Vita® shade system. The...
Transcript of Mold Chart Anterior and Posterior Hardened Plastic Teeth€¦ · newest Vita® shade system. The...
Mold ChartAnterior and Posterior Hardened Plastic Teeth
Since 1864Since 1864
THE PROFESSIONAL’S CHOICE FOR A NATURAL SMILE
24 Molds Upper Anterior
32 Molds Upper & Lower Posterior0° Profile of 1st Premolar Profile of 1st Premolar20°
Profile left central Profile left central Profile left central
7.7
10.1
47.0/43.2
5N X
7.4
9.8
45.0/41.2
5S Y,YS,YL
8.2
10.2
49.0/44.6
7N X
8.8
11.0
53.0/48.8
7M W
9.0
11.8
54.0/49.4
5L V,VS,VL
9.110
.554.0/49.6
1L V,VS,VL
8.7
9.5
51.0/46.8
1M W
8.1
9.8
47.0/43.0
2S Y,YS,YL
8.5
11.2
50.0/45.6
3N X
10.5
8.1
47.0/43.0
3S Y,YS,YL
9.1
12.0
53.5/48.8
3M W
9.7
11.2
57.0/52.6
1G U
33.033Z
35.3
33.0
30.531Z
31.2
28.729Z
32.3
29.629XX
32.9
30.731XX
35.0
32.833XX
7.57
8.66
8.52
9.18
7.02
8.25
7.86
8.69
6.94
8.48
8.35
8.56
Profile of 1st PremolarProfile of 1st Premolar 10° Functional33° Anatomical Medium
Profile left central Profile left central Profile left central
8.45
10.5
50.0/46.0
∆ F42 ∆H
9.8
12.7
57.7/52.6
9G U
8.8
11.2
51.0/46.8
12M W
8.6
10.6
50.5/46.4
10M W
8.2
10.8
48.0/43.8
12N X
8.2
10.0
49.0/45.08.2
10.2
48.0/43.8
8N X
8.7
10.9
51.5/47.0
7.5
9.7
44.5/40.4
8S Y,YS,YL
8M W
∆ E32 ∆H
8.5
10.7
49.0/45.0
∆ E22 ∆H
8.25
10.2
47.5/43.5
∆ D55 ∆E
8.5
10.6
50.0/45.5
∆ E12 ∆N
36.5
33.034X
34.0
32.033X
33.5
31.032X
9.09
10.14
8.63
9.28
9.87
9.99
33.0
29.630M
35.5
32.032M
38.0
34.334M
9.60
10.38
9.13
9.35
9.16
9.32
9 Molds Lower Anterior
Profile of 1st Premolar Profile of 1st Premolar10° Delta∆ Shallow Cusps 10° Delta∆ Shallow Cusps
Profile left central Profile left central Profile left central
7.5
9.7
44.5/40.4
8S Y,YS,YL 29XX
6.4
11.3
45.6/42.0
U G
6.010
.7
43.2/39.4
V L
6.0
10.4
42.0/38.6
W M
5.5
9.7
39.5/36.4
X N
5.1
Suggested ArticulationMold Number
9.5
36.7/33.8
Y S
5.0
7.7
36.3/33.2
YS S
4.95
9.4
38.0/33.5
∆ E G
4.9
9.1
36.5/32.0
∆ H L
5.2
9.1
38.0/33.5
∆ N M
Width of Upper 1st PremolarMoldNumber
Straight line of 4 lower
Straight line of 4 upper
38.6
36.0∆ 36X
35.6
34.0∆ 34X
31.2
30.0∆ 30X
33.9
32.0∆ 32X
9.1
9.4
7.7
8.25
9.5
10.5
8.5
9.25
32.3
29.6 7.86
8.69
Profile of 1st Premolar
15.7 (width of two)
PXL36 UpperBicuspidsOnly
11.4
AXL UpperCentralIncisorOnly
Specialty Item Key
12.2
Phot
ogra
phs
of te
eth
are
with
in +
/- 3
% o
f act
ual s
ize.
Tooth measurements are within +/- 5% of stated value.
Profile of 1st Premolar
Profile left central Length of left central
Width on curve/straight lineWidth of left central Width of Lower 1st Premolar
Tapering Ovoid TypeCombined Symbols
MOLDCLASSIFICATIONSYMBOLS
Square Tapering Ovoid
Justi Imperial ViVO® Denture TeethJusti Imperial ViVO® offers traditional quality American molds using the newest Vita® shade system. The effect of this combination is outstanding esthetics and excellent functionality for the modern technician. The ability of the teeth to blend into the adjacent dentition makes producing great looking dentures and partials much more predictable.The cross-linking system employed in manufacturing the Imperial ViVO® tooth line further enhances resistance to wear.
Features and Benefits of using Imperial ViVO® Denture Teeth: American materials and manufacture: Assuring quality and safety of materialsVacuum Molded: Denser, non-porous acrylic for longer wearHand finished: No grinding of flash saving production timeAvailability: Through dealers or same day shipping from California factoryValue: Comparable in quality, esthetics and wear resistance to teeth at 3 times the priceGuarantee: Backed by 150 years in denture tooth manufacturing. Written guarantee available upon request
Shade Availability The Imperial ViVO® line is available in 16 of the Classical Vita® type shades including 3 bleached shades: OM1, OM2, OM3, A1, A2, A3, A3.5, A4, B1, B2, B3, B4**, C1, C2, C3**, C4, D2, D3, D4****These Imperial ViVO® shades can be manufactured upon request. Please inquire for quantity and terms.
Made in the USA All teeth are made in the USA and backed by over one hundred fifty years of experience. All raw materials purchased from US factories.
Imperial ViVO® Upper
Anterior
Lower Anterior
0° Flat Plane
10° Functional
*10° Delta∆ Shallow Cusps
(Anatoline®)20° Semi-
Anatomical33°
Anatomical
1G U 33Z 34X ∆36X 33XX 34M1L V, VS, VL 33Z 33X, 34X ∆34X, ∆36X 33XX 34M1M W 31Z 32X, 33X ∆32X, ∆34X 31XX 32M2S Y, YS, YL 29Z 30X ∆30X 29XX 30M3M W 31Z 32X, 33X ∆32X, ∆34X 31XX 32M3N X 31Z 32X ∆32X 31XX 32M3S Y,YS, YL 29Z 30X ∆30X 29XX 32M5L V, VS, VL 33Z 33X, 34X ∆34X, ∆36X 33XX 34M5N X 31Z 32X ∆32X 31XX 32M5S Y, YS, YL 29Z 30X ∆30X 29XX 30M7M W 31Z 32X, 33X ∆32X, ∆34X 29XX 32M7N X 31Z 32X ∆32X 31XX 32M8M W 31Z 32X, 33X ∆32, ∆34 31XX 30M, 32M8N X 31Z 32X ∆32X 31XX 32M8S Y, YS, YL 29Z 30X ∆30X 29XX 30M9G U 33Z 34X ∆36X 33XX 34M
10M W 31Z 32X, 33X ∆32X, ∆34X 31XX 32M12M W 31Z 32X, 33X ∆32X, ∆34X 31XX 32M12N X 31Z 32X ∆32X 31XX 30M, 32M∆E12 ∆N 31Z 32X ∆32X 31XX 32M∆E22 ∆H 29Z 29X ∆30X 29XX 30M∆E32 ∆H 31Z 32X ∆32X 31XX 32M∆F42 ∆H 30Z 32X ∆32X 31XX 32M∆D55 ∆E 30Z 29X ∆30X 29XX 30M
Bite relation will obviously alter the size requirements for lower teeth. As a general rule, the table above will provide posterior molds and sizes which are approximately correct. *10° Delta∆ Shallow Cusps are comparable to the Anatoline® tooth line.
Imperial ViVO®
Portrait®
1G -
1L 12G
1M 13E
2S 13D
3M 21E
3N 31F
3S 42D
5L 11H
5N 11D
5S 22C
7M 45H
7N 75EThis chart is a guide only. Please refer to actual dimensions, shape and buccal contour for optimum mold selection.
Imperial ViVO®
Portrait®
8M 62G
8N 62E
8S 76D
9G 21J
10M 45F
12M 65G
12N 55F
∆E12 12E
∆E22 22E
∆E32 32E
∆F42 43F
∆D55 55D
Mold Articulation Mold Comparison Chart
To obtain tooth order forms and instructions in the setting and
processing of synthetic resin teeth please visit our website or contact:
Justi Products, Literature Dept. A Brand Division of American Tooth Industries
1200 Stellar Dr. • Oxnard, CA 93033-2404Toll Free (800) 235-4639 • CA (805) 487-9868
www.americantooth.com
NOTE: For achieving optimum results with our teeth, please refer to the written instructions.
Anatoline®, Portrait® and Vita® are not registered trademarks of American Tooth Industries.
MC
-001
REV
. 01/
2016
MANUFACTURED IN THE USA BYAMERICAN TOOTH INDUSTRIES
1200 Stellar Drive, Oxnard, CA 93033-2404(805) 487-9868 • FAX (805) 483-8482
E-mail: [email protected] • Website: www.americantooth.com
Since 1864Since 1864
The cross-linking system employed is an interpenetrated multilayered, intersectional polymer network. 100% bondability with methyl methacrylate denture base material. Justi® Hardened Plastic Teeth comply with ANSI/ADA Specification #15 Published in 2008, Identical adoption of ISO Standard #22112:2005
Front cover denture created by: Thomas R. Zaleske
©2016 by American Tooth Industries. All rights reserved. No part of this mold chart may be reproduced without written permission from American Tooth Industries.
Outstanding esthetics and excellent functionality