Mohamed Magdy

5
Mohamed Magdy, 1, Ebn elkadi Street, Victoria, Alexandria, Egypt, [email protected] / [email protected] Mobile: +2 01221583585 Objective: To use my skills in civil engineering to manage and coordinate all construction activities and ensure that all project deliverables are achieved with regards to specifications and standards to achieving the company goals . Personal Information: Date of Birth: 3/11/1987 Nationality: Egyptian. Marital Status: Single. Driving License: Valid (Saudi & Egyptian) Military Status: Exempted. Education: University: Alexandria University (B.S.C in Civil Engineering May 2009 Grade good). Department: Civil Department. Graduation project: material (Grade very good). Language known: Arabic: Mother Tongue English: written and spoken good Career History: [From May 2016- present] Company: GAMA for Trading & Contracting Company. Position: Technical Office Civil Engineer. Key responsibility: Preparing shop drawings, conforming drawing, Details drawing for footings & columns & slabs and beams also finishing work for block work & plastering & paints work & marbles & false celling & raised floor & butler sheets for roof & roofing layers. Coordination between all departments. Quantity surveying. About project: Project: Sodic- Commercial Building Project Description: Commercial building 5000 m² consist of 8 Floors (2 floors underground (parking area) and 6 floors above ground.

Transcript of Mohamed Magdy

Page 1: Mohamed Magdy

Mohamed Magdy,

1, Ebn elkadi Street, Victoria, Alexandria, Egypt, [email protected] / [email protected]

Mobile: +2 01221583585

Objective: To use my skills in civil engineering to manage and coordinate all construction activities and ensure that all

project deliverables are achieved with regards to specifications and standards to achieving the company goals.

Personal Information: Date of Birth: 3/11/1987

Nationality: Egyptian.

Marital Status: Single.

Driving License: Valid (Saudi & Egyptian)

Military Status: Exempted.

Education: University: Alexandria University (B.S.C in Civil Engineering May 2009 Grade good).

Department: Civil Department.

Graduation project: material (Grade very good).

Language known:

Arabic: Mother Tongue

English: written and spoken good

Career History: [From May 2016- present] Company: GAMA for Trading & Contracting Company.

Position: Technical Office Civil Engineer.

Key responsibility:

Preparing shop drawings, conforming drawing, Details drawing for footings & columns & slabs and beams

also finishing work for block work & plastering & paints work & marbles & false celling & raised floor &

butler sheets for roof & roofing layers.

Coordination between all departments.

Quantity surveying.

About project:

Project: Sodic- Commercial Building

Project Description: Commercial building 5000 m² consist of 8 Floors (2 floors underground (parking area)

and 6 floors above ground.

Page 2: Mohamed Magdy

[From September 2013 – May 2016] Company: Saudi BinLadin Group.

Position: Technical Office Civil Engineer.

Key responsibility:

Preparing Work Shop Drawings and Working drawings and Bar Bending Schedules.

Preparing technical, Drawings and material submittals.

Coordination between construction and engineering teams, Architectural, Structural Mechanical and

Electrical departments, ensuring that the construction requirements are conveyed to the engineering teams and

that the engineering deliverables satisfy the construction requirements.

Preparing the construction method of statements with construction personnel.

Preparing Quantity Surveying Sheets and specifications.

Prepare the monthly reports of all projects including and not limited to cash in/out.

Monitoring progress through the construction process and comparing this with the project schedule of work.

Attend progress meetings, discuss and suggest technical proposals.

About project:

Project: expansion of holy haram (Security Building-Plot3).

Project Description: avery large scale Tower consist of 24 Floor (4 floors underground and 19 floor

above ground plus helipad) this tower is linked to holy haram by two underground tunnels to facilitate

movement and arrival of the soldiers to Haram in case emergency.

Total plot area: 10,216 m²

Contract Budget: 99,711,371 S.R (approximate).

Consultants of project: Dar Al-Handasah (Shair and Partners).

[From July 2012- August 2013] Company: GAMA for Trading & Contracting Company.

Position: Technical Office Civil Engineer

Key responsibility:

Preparing shop drawings, conforming drawing, Details drawing for footings & columns & slabs and beams

also finishing work for block work & plastering & paints work & marbles & false celling king span & raised

floor & butler sheets for roof & roofing layers.

Coordination between all departments.

Quantity surveying.

About project:

Project: Kraft foods -New Borg el Arab, Alexandria

Project Description: Main factory 38000 m² (work shop Building & utility Building & Flavor Building &

Debagging Building & Raw material Building & 6 steel Canopies &waste water treatment & landscape and

Drainage works).

Page 3: Mohamed Magdy

[From June 2009 to June 2012] Company: A.C.C (Alexandria Construction Company).

Position: Technical Office Civil Engineer

Key responsibility:

Structural engineer of Open air malls shop drawing special building Department (Project Malls,

Mosques, Water Park Administration Building & Commercial Center… etc.).

Conforming drawing, Details drawing, Check the Design and Re-Design If Needed.

Technical Support for the Site – Buildings in Phase One - Responsible for Coordination between technical

office and the site.

About project:

Project: Madinaty Project special building Department (New Cairo)

Project Description: That project total area is around 40 million m². Phase one contains more than 463

multi-story building and 1105 villa its areas between 300- 650m²-Open Air Malls-Schools-Administration

buildings.

Consultants of project: ECG Group

Key achievements: Coordination drawing for 4000m³ Transfer Slab.

Rigging plan for 10 Tower Cranes.

Coordination for 800 ton steel structure shuttering system.

Co-ordinate between Architectural Drawing, Structural Drawing and (HVAC, Electrical, PG, Civil &

Landscape) Drawings.

Handle the Technical issues at the site.

Monitoring works including (Request for Information, Proposals, Contractor Drawings, Variations, etc…)

Review Subcontractors workshop drawings and submitted to Consultant for approval.

Preparing all As-built Drawings.

Good communication and writing skills.

Training: Training in Talaat Mustafa in San Stefano complex project San Stefano complex combined of 30 floors

building complex of mixed use that comprise 3 underground Parking floors, six floors for commercials and retail

actives, and the remaining floors and dedicated for residential units, four seasons hotel, in addition to beach cabanas

and marine works.

Skills: MS. Office: (word, Excel, PowerPoint)

AutoCAD: excellent 2-d Attended AutoCAD course.

AutoCAD Structure Detailing.

Autodesk Revit Structure.

SAP.

Computer networking fundamentals courses.

Good hardware troubleshooting.

Excellent internet skills.

Good 2-D & 3-D skills.

Excellent problem solving and analytical skills.

Open minded and able to work in complex projects and environment.

Page 4: Mohamed Magdy

Interests: Target/result oriented; with planning& management skills Positive attitude, open to learn Personal effectiveness

{organizational/communication/time management}. Refer to work under pressure.

Hobbies: Reading, sports in general, learning languages and surfing the internet.

References: Available up on request.

Page 5: Mohamed Magdy