Module Rebuild Service “Performance PLUS” CELL-CON Rebuild · 2007-10-19 · Duty Roll-up Hose...
Transcript of Module Rebuild Service “Performance PLUS” CELL-CON Rebuild · 2007-10-19 · Duty Roll-up Hose...
Let SETCO rebuild your Cell-Con module to “like-new” condition for significantly less than new equipment. With over 100 years experience in spindle and slide design, manufacturing and rebuild services, SETCO has the
technical expertise to deliver professional quality backed by a 1 year warranty and satisfaction guarantee!
Install New Precision Ground Ball Screws
Install New Front & RearBearing Supports
Install New Travel Limit and Proximity
Switches
Install New Hardened Ways
Refit All Slides with New Low Friction Turcite
Install New Way and Valley
Wipers
Install NewMetal Way Covers On
All Axes
Install New Heavy Duty Roll-up Hoseand Cable Carriers
Refit Dual Taper Gibs and Gib Locks
to All Axes
Perform Complete Module Teardown and Inspection and Provide Detailed List of Repairs.
Clean, Prep, and Repaint Machine Exterior to
Original Color
Flush and Clean All Lube Blocks and Replace All
Hydraulic and Lube Lines
Complete Machine Runoff toManufacturer Specification
Firm Quote of Necessary Repairs Identifying Exceptions and Contingency Plans*
Inspect Motors, Drives, Controls and
Wiring to Ensure Working Order
“Performance PLUS” CELL-CON Rebuild“Performance PLUS” CELL-CON Rebuild
Provide a Complete Spindle Rebuild
Call Today for Free No-obligation Quote!Tel: 800-543-0470 Fax: 513-941-6913 e-mail: [email protected]
Module Rebuild Service
Standard1 Year*
Warranty!
StandardStandard1 Year1 Year*
WarrantyWarranty!!
Module Rebuild Service
Quality Rebuild ServicesQuality Rebuild Services
Publication R-0012 2002 SETCO Sales Company Printed in U.S.A 3M 0602 RPI
Specification Measured @ SETCO Performance PLUS RebuildPositioning Accuracy Original Spec +/- .0002" "Like new" +/- .0002"Axis Repeatability Original Spec +/- .0001" "Like new" +/- .0001"
163,000 - 170,000 lbf/in @ 425 Hz with Axial Direction
57% Increase in Structural Dynamic Stiffness38% Increase in Machine Dampening
for Improved Machining Capability339,000 - 361,000 lbf/in
@ 425 Hz with Axial Direction.51% Increase in Structural Dynamic Stiffness
32% Increase in Machine Dampeningfor Improved Machining Capability
425 Hz9% Increase in Critical Frequencies
390 HzCritical Frequency
102,000 - 106,000 lbf/in @ 390 Hz Axial Direction
Axial PlaneDynamic Stiffness
223,000 - 241,000 lbf/in @ 390 Hz Radial Direction
Radial DirectionDynamic Stiffness
Start-to-Finish
“Performance PLUS” CELL-CON Rebuild