module mini power amp...mini power amp module 16 6 Technical specifications Output power 2 x 20 W @...
Transcript of module mini power amp...mini power amp module 16 6 Technical specifications Output power 2 x 20 W @...
TA-50mini power amp
module
user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
02.09.2015, ID: 328775
Table of contents
1 General information................................................................................................................................. 41.1 Further information........................................................................................................................... 51.2 Notational conventions.................................................................................................................... 61.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 13
5 Connections and operating elements........................................................................................... 14
6 Technical specifications....................................................................................................................... 17
7 Plug and connection assignment.................................................................................................... 18
8 Cleaning....................................................................................................................................................... 21
9 Protecting the environment.............................................................................................................. 22
Table of contents
TA-50
3
1 General information
This manual contains important instructions for the safe operation of the unit. Read and followthe safety instructions and all other instructions. Keep the manual for future reference. Makesure that it is available to all those using the device. If you sell the unit please make sure thatthe buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject tochange.
General information
mini power amp module
4
1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on thefollowing points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics ofinterest for you quickly.
Online guides Our online guides provide detailed information on technical basicsand terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device thecustomer service will gladly assist you.
General information
TA-50
5
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that areused in this manual.
Letterings
General information
mini power amp module
6
Signal word Meaning
DANGER! This combination of symbol and signal word indicates animmediate dangerous situation that will result in death orserious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐sible dangerous situation that can result in minor injury if itis not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐sible dangerous situation that can result in material andenvironmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
TA-50
7
2 Safety instructions
This device amplifies electric audio frequency signals to operate passive speakers. Use thedevice only as described in this user manual. Any other use or use under other operating con‐ditions is considered to be improper and may result in personal injury or property damage. Noliability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectualabilities and having corresponding knowledge and experience. Other persons may use thisdevice only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!Danger for childrenEnsure that plastic bags, packaging, etc. are disposed of properly and are notwithin reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) fromthe unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
mini power amp module
8
CAUTION!Possible hearing damageThe device can produce volume levels that may cause temporary or permanenthearing impairment. Over an extended period of time, even levels that seem tobe uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears orhearing impairment. If this is not possible, keep a greater distance or use suffi‐cient ear protectors.
NOTICE!Risk of fireDo not cover the device nor any ventilation slots. Do not place the device nearany direct heat source. Keep the device away from naked flames.
Safety instructions
TA-50
9
NOTICE!Operating conditionsThis device has been designed for indoor use only. To prevent damage, neverexpose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, andstrong vibrations.
NOTICE!Magnetic fieldsThe device generates strong magnetic fields that can interfere with the functionof poorly shielded devices. The strongest magnetic fields are directly above andbelow the power amplifier. Therefore, never place sensitive devices such as pre-amplifiers, radio transmission systems, or tape decks directly above or below thepower amplifier. When installing the power amplifier into a rack, you should placeit in the lowest position, and further equipment such as pre-amplifiers in thehighest position.
Safety instructions
mini power amp module
10
NOTICE!External power supplyThe device is powered by an external power supply. Before connecting theexternal power supply, ensure that the input voltage (AC outlet) matches thevoltage rating of the device and that the AC outlet is protected by a residual cur‐rent circuit breaker. Failure to do so could result in damage to the device and pos‐sibly the user.
Unplug the external power supply before electrical storms occur and when thedevice is unused for long periods of time to reduce the risk of electric shock orfire.
Safety instructions
TA-50
11
3 Features
n Minimal space requirementn Ideal for mounting on flat panel displays, in suspended ceilings,…n Output power: 2 × 17 W @ 4 Ω (2 × 20 W max.)n Integrated limitern Suitable DC 24 V power supply includedn Standby feature
Features
mini power amp module
12
4 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keepthe equipment packaging. To fully protect the device against vibration, dust and moistureduring transportation or storage use the original packaging or your own packaging materialsuitable for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-quality cables for all connections.
The device is suited for mounting on flat panel displays, in suspended ceilings etc. Two suit‐able mounting brackets are included.
Installation and starting up
TA-50
13
5 Connections and operating elements
Connections and operating elements
mini power amp module
14
1 [STEREO | BRIDGE]
Switch for operating modes ‘STEREO’ (channels operate independently of each other) and ‘BRIDGED’ (channels areinterconnected to form one channel with double output).
2 [LIMITER OFF | ON]
On / off switch for the integrated limiter.
3 [VOLUME]
Volume control.
4 [POWER]
Power indicator. The Power indicator is lit green during normal operation and changes to red in standby-mode.
5 [POWER OFF | AUTO | ON]
Position OFF: Unit switched off.
Position AUTO: Unit switched on. The unit automatically enters the standby mode when no input signal is present for15 minutes.
Position ON: Unit switched on, standby feature disabled.
Connections and operating elements
TA-50
15
6 [DC 24V IN]
Phoenix terminals to connect the supplied 24 V power adapter for power supply.
7 [INPUT]
Input socket (3.5 mm mini phone jack) for connecting the signal source.
8 [SPEAKER OUTPUT]
Phoenix terminals to connect speaker boxes in bridged (one speaker box with 8 Ω) or stereo mode (two speakerboxes with 4 Ω each), see wiring diagram on the unit.
Connections and operating elements
mini power amp module
16
6 Technical specifications
Output power 2 x 20 W @ 4 Ω
Frequency range 35 Hz…50 kHz, -3.5 dB
Input sensitivity 330 mV (17 W, 4 Ω)
Input impedance 10 kΩ
Signal-to-noise ratio -95 dB (4 Ω, 1 K)
THD 6.5 %
Protection circuit Limiter
Control indicator Power
Power consumption at half output power 40 W
Operating supply voltage DC 24 V
Dimensions (W × D × H) 145 mm × 95 mm × 45 mm
Weight 0.6 kg
Technical specifications
TA-50
17
7 Plug and connection assignment
This chapter will help you select the right cables and plugs to connect your valuable equip‐ment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if aplug fits into the socket, an incorrect connection may result in a destroyed power amp, a shortcircuit or ‘just’ in poor transmission quality!
Unbalanced transmission is mainly used in semi-professional environment and in hifi use.Instrument cables with two conductors (one core plus shielding) are typical representatives ofthe unbalanced transmission. One conductor is ground and shielding while the signal is trans‐mitted through the core.
Unbalanced transmission is susceptible to electromagnetic interference, especially at lowlevels, such as microphone signals and when using long cables.
In a professional environment, therefore, the balanced transmission is preferred, because thisenables an undisturbed transmission of signals over long distances. In addition to the conduc‐tors ‘Ground’ and ‘Signal’, in a balanced transmission a second core is added. This also transfersthe signal, but phase-shifted by 180°.
Introduction
Balanced and unbalanced trans‐mission
Plug and connection assignment
mini power amp module
18
Since the interference affects both cores equally, by subtracting the phase-shifted signals, theinterfering signal is completely neutralized. The result is a pure signal without any noise inter‐ference.
1 Signal
2 Ground
1 Signal (in phase, +)
2 Signal (out of phase, –)
3 Ground
1/4" TS phone plug (mono,unbalanced)
3.5 mm TRS phone plug (mono,balanced)
Plug and connection assignment
TA-50
19
1 Signal (left)
2 Signal (right)
3 Ground, shielding
Three-pole 1/8" mini phone jack(stereo, unbalanced)
Plug and connection assignment
mini power amp module
20
8 Cleaning
The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Beforecleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint-free damp cloth for cleaning. Never use solvents or alcohol for cleaning.
Fan grids
Cleaning
TA-50
21
9 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have beenchosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure thatthey are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive(WEEE). Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local wastefacility. When discarding the device, comply with the rules and regulations that apply in yourcountry. If in doubt, consult your local waste disposal facility.
Disposal of the packaging mate‐rial
Disposal of your old device
Protecting the environment
mini power amp module
22
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de