Module Handbook Mechanical Engineering (International ...€¦ · Module Handbook Mechanical...

Module HandbookMechanical Engineering (International) BachelorSPO 2017Winter Term 18/19Date: 10/01/2018

KIT – The Research University in the Helmholtz Association www.kit.edu

TABLE OF CONTENTS TABLE OF CONTENTS

Table of Contents

I Modules 4

1 Orientation Exam 4Orientation Exam - M-MACH-104162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Bachelor Thesis 5Bachelor Thesis - M-MACH-103722 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Fundamentals of Engineering 7Advanced Mathematics - M-MATH-104022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Engineering Mechanics (BSc-Modul 03, TM) - M-MACH-102572 . . . . . . . . . . . . . . . . . 9Manufacturing Processes (MEI) - M-MACH-104232 . . . . . . . . . . . . . . . . . . . . . . . . . 11Materials Science (BSc-Modul 04, WK) - M-MACH-102562 . . . . . . . . . . . . . . . . . . . . 13Technical Thermodynamics (BSc-Modul 05, TTD) - M-MACH-102574 . . . . . . . . . . . . . . 14Fluid Mechanics (BSc-Modul 12, SL) - M-MACH-102565 . . . . . . . . . . . . . . . . . . . . . . 16Physics - M-PHYS-104030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Electrical Engineering - M-ETIT-104049 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Measurement and Control Systems (BSc-Modul 11, MRT) - M-MACH-102564 . . . . . . . . . . 20Computer Science (BSc-Modul 09, Inf) - M-MACH-102563 . . . . . . . . . . . . . . . . . . . . . 21Mechanical Design (BSc-Modul 06, MKL) - M-MACH-102573 . . . . . . . . . . . . . . . . . . . 22Machines and Processes (mach13BSc-Modul 13, MuP) - M-MACH-102566 . . . . . . . . . . . . 23Production Operations Management - M-MACH-100297 . . . . . . . . . . . . . . . . . . . . . . 24

4 Majors in Mechanical Engineering (International) 25MF A: Global Production Management - M-MACH-103351 . . . . . . . . . . . . . . . . . . . . . 25MF B: Energy Engineering - M-MACH-103350 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27MF C: Automotive Engineering - M-MACH-103349 . . . . . . . . . . . . . . . . . . . . . . . . . 29

5 International Project Management and Soft Skills 31International Project Management and Soft Skills - M-MACH-103322 . . . . . . . . . . . . . . . 31

II Courses 33Advanced Mathematics I - T-MATH-108266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Advanced Mathematics I Prerequisite - T-MATH-108265 . . . . . . . . . . . . . . . . . . . . . . . . . . 34Advanced Mathematics II - T-MATH-108268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Advanced Mathematics II Prerequisite - T-MATH-108267 . . . . . . . . . . . . . . . . . . . . . . . . . . 36Advanced Mathematics III - T-MATH-108270 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Advanced Mathematics III Prerequisite - T-MATH-108269 . . . . . . . . . . . . . . . . . . . . . . . . . 38Automated Production Systems (MEI) - T-MACH-106732 . . . . . . . . . . . . . . . . . . . . . . . . . 39Automotive Engineering I - T-MACH-100092 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Automotive Engineering II - T-MACH-102117 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Bachelor Thesis - T-MACH-108685 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Basics in Measurement and Control Systems - T-MACH-104745 . . . . . . . . . . . . . . . . . . . . . . 43Basics of Manufacturing Technology (MEI) - T-MACH-108747 . . . . . . . . . . . . . . . . . . . . . . . 44Computer Science for Engineers - T-MACH-105205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Computer Science for Engineers - T-MACH-105206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Electrical Engineering and Electronics - T-ETIT-108386 . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Electrical Machines - T-ETIT-100807 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Engineering Mechanics I - T-MACH-100282 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Engineering Mechanics II - T-MACH-100283 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Engineering Mechanics III & IV - T-MACH-105201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Excercises in Technical Thermodynamics and Heat Transfer I - T-MACH-105204 . . . . . . . . . . . . . 52Excercises in Technical Thermodynamics and Heat Transfer II - T-MACH-105288 . . . . . . . . . . . . . 53Fluid Mechanics - T-MACH-105207 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Fundamentals of Combustion I - T-MACH-105213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Mechanical Engineering (International) BachelorModule Handbook, Date 10/01/2018, Winter Term 18/19

2

TABLE OF CONTENTS TABLE OF CONTENTS

Fundamentals of Energy Technology - T-MACH-105220 . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Global Logistics - T-MACH-105379 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Global Production Engineering (MEI) - T-MACH-106731 . . . . . . . . . . . . . . . . . . . . . . . . . . 58Heat and Mass Transfer - T-MACH-105292 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Machine Dynamics - T-MACH-105210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Machines and Processes - T-MACH-105208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Machines and Processes, Prerequisite - T-MACH-105232 . . . . . . . . . . . . . . . . . . . . . . . . . . 62Materials Science I & II - T-MACH-105145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Materials Science Lab Course - T-MACH-105146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Mechanical Design I & II - T-MACH-105286 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Mechanical Design I, prerequisites - T-MACH-105282 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Mechanical Design II, prerequisites - T-MACH-105283 . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Mechanical Design III & IV - T-MACH-104810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Mechanical Design III, Constructing the Team - T-MACH-105284 . . . . . . . . . . . . . . . . . . . . . 69Mechanical Design IV, Constructing the Team - T-MACH-105285 . . . . . . . . . . . . . . . . . . . . . 70Presentation - T-MACH-108684 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Production Operations Management - T-MACH-100304 . . . . . . . . . . . . . . . . . . . . . . . . . . 72Project and Operations Management - T-WIWI-108295 . . . . . . . . . . . . . . . . . . . . . . . . . . . 73SmartFactory@Industry (MEI) - T-MACH-106733 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Technical Thermodynamics and Heat Transfer I - T-MACH-104747 . . . . . . . . . . . . . . . . . . . . 75Technical Thermodynamics and Heat Transfer II - T-MACH-105287 . . . . . . . . . . . . . . . . . . . . 76Tutorial Engineering Mechanics I - T-MACH-100528 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Tutorial Engineering Mechanics II - T-MACH-100284 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Tutorial Engineering Mechanics III - T-MACH-105202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Tutorial Engineering Mechanics IV - T-MACH-105203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Vehicle Comfort and Acoustics I - T-MACH-105154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Vehicle Comfort and Acoustics II - T-MACH-105155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Virtual Engineering (Specific Topics) - T-MACH-105381 . . . . . . . . . . . . . . . . . . . . . . . . . . 83Wave and Quantum Physics - T-PHYS-108322 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Working Methods in Mechanical Engineering - T-MACH-105296 . . . . . . . . . . . . . . . . . . . . . . 85


3

1 ORIENTATION EXAM

Part I

Modules1 Orientation Exam

M Module: Orientation Exam [M-MACH-104162]

Responsibility:

Organisation: Universität gesamtCurricular An-chorage:

Compulsory

Contained in: Orientation Exam

ECTS Recurrence Duration Language Version0 Each term 2 terms German 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-100282 Engineering Mechanics I (S. 49) 7 Thomas Böhlke, Tom-Alexander

LanghoffT-MACH-100283 Engineering Mechanics II (S. 50) 6 Thomas Böhlke, Tom-Alexander

LanghoffT-MATH-108266 Advanced Mathematics I (S. 33) 7 Maria Aksenovich, Stefan Kühn-

lein


4

2 BACHELOR THESIS

2 Bachelor Thesis

M Module: Bachelor Thesis [M-MACH-103722]

Responsibility: Martin Heilmaier

Organisation: WerkstoffkundeCurricular An-chorage:

Compulsory

Contained in: Bachelor Thesis

ECTS Recurrence Duration Language Version15 Each term 1 term English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-108685 Bachelor Thesis (S. 42) 12 Martin HeilmaierT-MACH-108684 Presentation (S. 71) 3 Martin Heilmaier

Learning Control / ExaminationsThe module Bachelor Thesis consists of a written bachelor thesis and an oral presentation of a scientific subject chosenby the student himself/herself or given by the supervisor. The bachelor’s thesis is designed to show that the student isable to deal with a problem of his/her subject area in an independent manner and within the given period of time usingscientific methods.The work load of the bachelor thesis corresponds to 12 ECTS. The maximal processing time of the bachelor thesis takesthree months.The date of issue of the subject has to be fixed by the supervisor and the student and to be put on record at theexamination board. The subject of the bachelor thesis may be only returned once and only within the first month ofprocessing timeOn a reasoned request of the student, the examination board can extend the processing time by up to one month. If thebachelor thesis is not completed in time, this examination is “failed” (5,0), unless the student is not responsible.The bachelor thesis is to be evaluated by not less than a professor or a senior scientist according to § 14 Abs. 3 Ziff.1 KITG and another examiner. Generally, one of the two examiners is the person who has assigned the thesis. If theexaminers do not agree, the bachelor thesis is graded by the examination board within this assessment; another expertcan be appointed too. The bachelor thesis has to be graded within a period of six weeks after the submission.The colloquium presentation must be held within 6 weeks after the submission of the bachelor thesis. The presentationshould last around 20 minutes, corresponds to 3 ECTS, and is followed by a scientific discussion with the present expertaudience.ConditionsThe requirement for admission to the bachelor thesis module are 120 ECTS. As to exceptions, the examination boarddecides on a request of the student (see § 14 (1) SPO).

Qualification ObjectivesThe student is able to work independently on a defined, subject-relevant theme based on scientific criteria within a givenperiod of time. The student is able to do research, to analyze information, to abstract as well as collect and recognizebasic principles and regularities on the basis of less structured information. He/she overviews a question, is able to choosescientific methods and techniques, and use them to solve the question or to identify other potentials. In general, this willbe carried out in consideration of social and/or ethical aspects.The student can interpret, evaluate, and if needed plot the results obtained. He/she is able to clearly structure a scientificwork and (a) to communicate it in written form using technical terminology as well as (b) to present it in oral form anddiscuss it with experts.ContentThe student shall be allowed to make suggestions for the topic of his/her bachelor thesis. The topic is set by the supervisor


5

2 BACHELOR THESIS

of the thesis in accordance with § 14 (3) SPO.WorkloadThe workload for the preparation and presentation of the bachelor thesis is about 450 hours.


6

3 FUNDAMENTALS OF ENGINEERING

3 Fundamentals of Engineering

M Module: Advanced Mathematics [M-MATH-104022]

Responsibility: Maria Aksenovich, Stefan Kühnlein

Organisation: KIT-Fakultät für MathematikCurricular An-chorage:

Compulsory

Contained in: Fundamentals of Engineering

ECTS Recurrence Duration Language Version21 Each winter term 3 terms English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MATH-108266 Advanced Mathematics I (S. 33) 7 Maria Aksenovich, Stefan Kühn-

leinT-MATH-108268 Advanced Mathematics II (S. 35) 7 Maria Aksenovich, Stefan Kühn-

leinT-MATH-108270 Advanced Mathematics III (S. 37) 7 Maria Aksenovich, Stefan Kühn-

leinT-MATH-108265 Advanced Mathematics I Prerequisite (S. 34) 0 Maria Aksenovich, Stefan Kühn-

leinT-MATH-108267 Advanced Mathematics II Prerequisite (S. 36) 0 Maria Aksenovich, Stefan Kühn-

leinT-MATH-108269 Advanced Mathematics III Prerequisite (S. 38) 0 Maria Aksenovich, Stefan Kühn-

lein

Learning Control / ExaminationsThree written exams for the parts I-III of length 120 minutes each.Module GradeThe grade for the module is composed from equally weighted grades for the examinations in Advanced Mathematics I-III.ConditionsNone.

Qualification ObjectivesThe students know the foundations of calculus of one and several variables, linear algebra, theory of differential equations,and probability theory. They know and can apply techniques in these fields.ContentBasic set theoretic notions, proofs, sequences and convergence, functions and continuity, series, derivatives, integrals,vector spaces, matrices, Laplace transform, functions of several variables, applications of multivariate calculus, Fourieranalysis, differential equations, probability.Literature

• Lecture notes• K. F. Riley, M. P. Hobson, S. J. Bence “Mathematical methods for physics and engineering”, Cambridge University

Press, 2015

WorkloadIn class: 270 hours


7


• lectures, tutorials and examinations

Independent study: 360 hours

• independent review of course material• work on homework assignments• preparation for written exams


8


M Module: Engineering Mechanics (BSc-Modul 03, TM) [M-MACH-102572]

Responsibility: Thomas Böhlke, Wolfgang Seemann

Organisation: Institut für Technische MechanikCurricular An-chorage:

Compulsory


ECTS Recurrence Duration Language Version23 Each winter term 4 terms German/English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-100282 Engineering Mechanics I (S. 49) 7 Thomas Böhlke, Tom-Alexander

LanghoffT-MACH-100283 Engineering Mechanics II (S. 50) 6 Thomas Böhlke, Tom-Alexander

LanghoffT-MACH-105201 Engineering Mechanics III & IV (S. 51) 10 Wolfgang SeemannT-MACH-100528 Tutorial Engineering Mechanics I (S. 77) 0 Thomas Böhlke, Tom-Alexander

LanghoffT-MACH-100284 Tutorial Engineering Mechanics II (S. 78) 0 Thomas Böhlke, Tom-Alexander

LanghoffT-MACH-105202 Tutorial Engineering Mechanics III (S. 79) 0 Wolfgang SeemannT-MACH-105203 Tutorial Engineering Mechanics IV (S. 80) 0 Wolfgang Seemann

Learning Control / Examinationsprerequisites EM I, II (see T-MACH-100528 “Engineering Mechanics I (Tutorial)” as well as T-MACH-100284 “Engineer-ing Mechanics II (Tutorial)”): they consist of solving problems of the work sheets in four categories: written mandatoryhomework, written homework, computational homework, colloquia.prerequisites EM III, IV“Engineering Mechanics I”, written exam, 90 minutes; graded:“Engineering Mechanics II”, written exam, 90 minutes; graded;“Engineering Mechanics III/IV”, written exam, 180 Minutes; graded;The final grade of this module is computed as ECTS-based weighted sum of the included exams.ConditionsNone

Qualification ObjectivesAfter having finished the lectures EM I and EM II the students can

• assess stress and strain distributions for the basic load cases within the framework of elasticity and thermoelasticity• compute and evaluate 3D stress and strain states• apply the principle of virtual displacements• apply energy methods and evaluate approximate solutions• evaluate the stability of equilibrium positions• solve worksheet problems to topics of the lecture using the computer algebra system MAPLE

In EM III and EM IV the students learn to analyse the motion of points and systems. Based on the axioms of Newtonand Euler they know how to derive equations of motion. Besides the synthetic methods they get familiar with analyticalmethods which are based on energy expressions and can be applied efficiently and formalised. These methods areintroduced in the scope of systems of mechanical engineering so that students can determine and analyse motions andthe forces which are generated by these motions.


9


ContentThis Module consists of the courses “Engineering Mechanics I (lecture)” up to “Engineering Mechanics IV (lecture)” aswell as “Engineering Mechanics I (Tutorial)” up to “Engineering Mechanics IV (Tutorial)”Contents of “Engineering Mechanics I”: basics of vector calculus; force systems; statics of rigid bodies; internal forces andmoments in bars and beams; friction; centre of gravity, centre of mass; work, energy, principle of virtual work; statics ofinextensible ropes; elastostatics of tension-compression-barsContents of “Engineering Mechanics II”: bending; shear; torsion; stress and strain state in 3D; Hooke’s law in 3D; elasticitytheors in 3D; energy methods in elastostatics; approximation methods; stabilityContents of “Engineering Mechanics III”:Kinematics: Cartesian, cylindrical and natural coordinates. Time derivatives in moving reference frames, angular velocitiesof reference frames.Kinetics of a particle:Newton’s axiom, Principle of d’Alembert, work of a force, kinetic and potential energies, principle of linear momentum,principle of moment of momentum, kinetics in moving reference systemsSystems of particles:Principle of center of mass, Principle of moment of momentum, impacts between particles, systems with variable mass,applications.Plain motion of rigid bodies:Pure translation, pure rotation, general plain motion. Instantaneous center of rotation, Kinetics, moment of momentum,principle of work and principle of energy conservation for a rotation around a space-fixed axis. Mass moment of inertia,parallel-axis-theorem.Principle of linear momentum and principle of moment of momentum for arbitrary plain motion.Principle of d’Alembert for plain motion. Principles of linear and moment of momentum in integral form. Applicationsfor impact problems.Contents of “Engineering Mechanics IV”:Spatial kinematics of a rigid body, Euler angles, angular velocity using Euler angles, Euler’s equations, inertia tensor, kineticenergy of a rigid body, free gyroscopes, forced gyroscopes, systems of rigid bodies, principle of d’Alembert, Lagrange’sequations of the first and second kind, generalized coordinates, free and forced vibration of one degree of freedom systems,frequency response, vibration of multi degree of freedom systems, vibration absorptionRemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.Workloadlectures and exercises: 204hhomework and preparation of examination: 486h


10


M Module: Manufacturing Processes (MEI) [M-MACH-104232]

Responsibility: Volker Schulze, Frederik Zanger

Organisation: KIT-Fakultät für MaschinenbauCurricular An-chorage:

Compulsory


ECTS Recurrence Duration Language Version4 Each winter term 1 term English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-108747 Basics of Manufacturing Technology (MEI) (S. 44) 4 Volker Schulze, Frederik Zanger

Learning Control / Examinationswritten exam (duration: 60 min)Conditionsnone

Qualification ObjectivesThe students . . .

• are able to classify the manufacturing processes by their general functionality according to the specific main groups(DIN 8580).

• have the ability to declare and explain the function of the significant manufacturing processes of the main groups(DIN 8580).

• are enabled to describe the characteristic process features (geometry, materials, accuracy, tools, machines) of thesignificant manufacturing processes of the main groups (DIN 8580).

• have the ability to derive the relevant process specific technical advantages and disadvantages of the characteristicprocess features.

• are enabled to perform a selection of suitable manufacturing processes for given components.• are enabled to classify the required manufacturing processes in the expiry of a process chain for the production of

given sample products.

ContentThe objective of the lecture is to classify the manufacturing technology within the wider context of production engineering,to provide an overview of the different manufacturing processes and to establish basic process knowledge of the commonprocesses. The lecture conveys the basic principles of manufacturing technology and deals with the manufacturingprocesses based on example components according to their classification into main groups regarding technical and economicaspects.

The following topics will be covered:

• Primary processing (casting, plastics engineering, sintering, additive manufacturing processes)• Forming (sheet-metal forming, massive forming)• Cutting (machining with geometrically defined and geometrically undefined cutting edges, separating, abrading)• Joining• Coating• Heat treatment and surface treatment

Workloadregular attendance: 21 hours


11


self-study: 99 hours


12


M Module: Materials Science (BSc-Modul 04, WK) [M-MACH-102562]

Responsibility: Martin Heilmaier

Organisation: WerkstoffkundeCurricular An-chorage:

Compulsory


ECTS Recurrence Duration Version14 Each winter term 2 terms 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105145 Materials Science I & II (S. 63) 11 Jens Gibmeier, Martin Heil-

maier, Kay WeidenmannT-MACH-105146 Materials Science Lab Course (S. 64) 3 Martin Heilmaier, Anton Mös-

lang, Kay Weidenmann

Learning Control / Examinationsnot graded: participation in 10 lab experiments, introductory colloquia must be passed and 1 short presentation must bepresented. The lab course must be finished successfully prior to the registration for the oral exam;graded: oral exam covering the whole module, 25 minutes.ConditionsNone

Qualification ObjectivesWithin this Module the students should

• gain knowledge of basics about structural and functional materials• be able to draw relationships between atomic structure, microstructure and properties• be able to assess material properties and corresponding applications


13


M Module: Technical Thermodynamics (BSc-Modul 05, TTD) [M-MACH-102574]

Responsibility: Ulrich Maas

Organisation: Institut für Technische ThermodynamikCurricular An-chorage:

Compulsory



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-104747 Technical Thermodynamics and Heat Transfer I

(S. 75)8 Ulrich Maas

T-MACH-105287 Technical Thermodynamics and Heat Transfer II(S. 76)

7 Ulrich Maas

T-MACH-105204 Excercises in Technical Thermodynamics and HeatTransfer I (S. 52)

0 Ulrich Maas

T-MACH-105288 Excercises in Technical Thermodynamics and HeatTransfer II (S. 53)

0 Ulrich Maas

Learning Control / ExaminationsPrerequisite: attestation each semester by homework assignmentsThermodynamics I: Written exam, graded, 3 hoursThermodynamics II: Written exam, graded, 3 hoursModule Gradeweight according to CPConditionsNone

Qualification ObjectivesThe students acquire the competency to master the fundamentals of thermodynamics and the ability to apply theknowledge an problem-solving in various branches of mechanical engineering and especially in the Energy Technologysector.An integral part of the model is that students can define the fundamental laws of thermodynamics and their application.The students are competent in describing and comparing the main processes in energy conversion. Using tools also appliedin Industry they are capable of analysing and rating the efficiency of processes. The students are capable of discussing thethermodynamical correlation of ideal gas mixtures, real gases and of humid air as well analysing them with the help of thelaws of thermodynamic. Furthermore the students are capable of defining and applying the heattransfer mechanisms.ContentThermodynamics I:

• System, properties of state• Chemical and thermodynamic properties of pure components• Absolute temperature, model systems• 1st law of thermodynamics for resting and moved systems Entropy and 2nd law of thermodynamics• Behavior of real substances described by tables, diagrams and equations of state• Machine processes

Thermodynamics II:

• Repetition of the topics of “Thermodynamics and Heat Transfer I”


14


• Mixtures of ideal gases• Moist air• Behaviour of real substances described by equations of state• Applications of the laws of thermodynamics to chemical reactions

RemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.Workloadlectures and exercises: 150hhomework and preparation of examination: 300h


15


M Module: Fluid Mechanics (BSc-Modul 12, SL) [M-MACH-102565]

Responsibility: Bettina Frohnapfel


Compulsory


ECTS Recurrence Duration Language Version8 Each summer term 2 terms German/English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105207 Fluid Mechanics (S. 54) 8 Bettina Frohnapfel

Learning Control / ExaminationsCommon examination of “Fluid Mechanics I” and “Fluid Mechanics II”; written exam, 3 hours (graded)Module Graderesult of examConditionsnone

Qualification ObjectivesAfter having completed this module the student is capable of deriving the mathematical equations that describe the motionof fluids and can determine flow quantities for generic problems. He/she can name characteristic properties of fluids anddistinguish different flow states. The student is capable of determining fluid quantities in fundamental applications. Thisincludes the calculation of

• static and dynamic forces acting from the fluid onto the solid• two-dimensional viscous flows• one-dimensional incompressible and compressible flows without losses• lossy flows through pipes

Contentproperties of fluids, surface tension, hydro- and aerostatics, kinematics, stream tube theory (compressible and incompress-ible), losses in pipeline systems, dimensional analysis, dimensionless numberstensor notation, fluid elements in continuum, Reynolds transport theorem, conservation of mass and momentum, continuityequation, constitutive law for Newtonian fluids, Navier-Stokes equations, angular momentum and energy conservation,integral form of the conservation equations, forces between fluids and solids, analytical solutions of the Navier-StokesequationsRemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.LiteratureZirep J., Bühler, K.: Grundzüge der Strömungslehre, Grundlagen, Statik und Dynamik der Fluide, Springer ViewegKuhlmann, H.: Strömungsmechanik, Pearson StudiumSpurk, J.H.: Strömungslehre, Einführung in die Theorieder Strömungen, Springer-VerlagKundu, P.K., Cohen, K.M.: Fluid Mechanics, Elsevier 2008


16


Workloadregular attendance: 64 hoursself-study: 176 hours


17


M Module: Physics [M-PHYS-104030]

Responsibility: Gernot Goll, Bernd Pilawa

Organisation: KIT-Fakultät für PhysikCurricular An-chorage:

Compulsory


ECTS Recurrence Duration Language Version5 Each summer term 1 term German/English 1

Compulsory

Identifier Course ECTS ResponsibilityT-PHYS-108322 Wave and Quantum Physics (S. 84) 5 Gernot Goll, Bernd Pilawa

Learning Control / ExaminationsThe assessment consists of a written exam according to Section 4(2), 1 of the examination regulation.ConditionsNone

Qualification ObjectivesThe students

• are familiar with the properties of waves and can discuss those• can reflect on the principles of relativity• comprehend the coherence of the particle and wave description of light and matter• can explain the limits of wave physics• are able the apply the Schrödinger-equation to basic problems in quantum mechanics• can explain the basic properties of atoms, especially for the hydrogen atom• can discuss fundamental aspects of the electronic properties of solids

Content

• Properties of waves• Acoustic and electromagnetic waves• Interference and diffraction• Relativity• Wave-particle dualism• Basic properties of atoms• Basic electronic properties of solids

RemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.Workload150 hours, consisting of attendance times (45), follow-up of the lecture including exam preparation and preparation ofexercises (105)


18


M Module: Electrical Engineering [M-ETIT-104049]

Responsibility: Klaus-Peter Becker

Organisation: KIT-Fakultät für Elektrotechnik und InformationstechnikCurricular An-chorage:

Compulsory


ECTS Recurrence Duration Language Version8 Each winter term 1 term German/English 1

Compulsory

Identifier Course ECTS ResponsibilityT-ETIT-108386 Electrical Engineering and Electronics (S. 47) 8 Klaus-Peter Becker

Learning Control / ExaminationsWritten exam, duration 3 hoursConditionsnone

RemarksExam and Lecture will be held in English.


19


M Module: Measurement and Control Systems (BSc-Modul 11, MRT)[M-MACH-102564]

Responsibility: Christoph Stiller


Compulsory



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-104745 Basics in Measurement and Control Systems (S. 43) 7 Christoph Stiller

Learning Control / ExaminationsType of Examination: written examDuration of Examination: 150 minutesModule Graderesult of examConditionsnone

Qualification Objectives

• Students are able to name, describe and explain control principles applied to physical quantities.• They are able to name, analyze and assess system theoretic characteristics of dynamical systems.• Students are able to represent real systems in a system theoretic model and to assess the suitability of a given

model.• Students are able to apply methods for controller design and to analyze their properties.• Students are able to select appropriate principles of metrology and to model, analyze and assess measurement

setups.• Students are able to quantify and assess measurement uncertainties.

Content1. Dynamic systems2. Properties of important systems and modeling3. Transfer characteristics and stability4. Controller design5. Fundamentals of measurement6. Estimation7. Sensors8. Introduction to digital measurementRemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.Workload84 hours presence time, 126 hours selfstudies


20


M Module: Computer Science (BSc-Modul 09, Inf) [M-MACH-102563]

Responsibility: Jivka Ovtcharova


Compulsory


ECTS Recurrence Duration Language Version6 Each summer term 1 term German/English 2

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105205 Computer Science for Engineers (S. 45) 6 Jivka OvtcharovaT-MACH-105206 Computer Science for Engineers (S. 46) 0 Jivka Ovtcharova

Learning Control / ExaminationsWritten examination “Computer Science for Engineers”, 100%, 180 minutes; Examination prerequisite: passed lap course.Module GradeExamination result “Computer Science for Engineers” 100%

ConditionsNone

Qualification ObjectivesStudents can identify and explain fundamental terms, problems and concepts of computer science. They can applythe basic methods of the OO modeling with UML and implement the object-oriented programming (OOP) with theprogramming language JAVA.ContentBasics: Information representation- and processing, terms and definitions: alphabet, data, signals, information, numeralsystems, propositional logic and Boolean algebra, computer architectures, programming paradigms.Object Orientation: Definition and important characteristics of object orientation, Object-oriented modeling with UML.Data Structures: Definition, properties and application of graphs, trees, linked lists, queues and stacks.Algorithms: Characteristics of algorithms, complexity analysis, design methods, important examples.Database management systems: Relational data model, relational algebra, declarative language SQL. Basics and conceptsof JAVA. Introduction to programming using JAVA.RemarksFor the Bachelor’s program Mechanical Engineering the module (including all brick details, exams and courses) is offeredin German.For the Bachelor’s program Mechanical Engineering (International) the module (including all brick details, exams andcourses) is offered in English.WorkloadAttendance time: 63 hoursSelf-study: 117 hours


21


M Module: Mechanical Design (BSc-Modul 06, MKL) [M-MACH-102573]

Responsibility: Albert Albers


Compulsory



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105286 Mechanical Design I & II (S. 65) 7 Albert Albers, Norbert

Burkardt, Sven MatthiesenT-MACH-104810 Mechanical Design III & IV (S. 68) 13 Albert Albers, Norbert

Burkardt, Sven MatthiesenT-MACH-105282 Mechanical Design I, prerequisites (S. 66) 0 Albert Albers, Sven MatthiesenT-MACH-105283 Mechanical Design II, prerequisites (S. 67) 0 Albert Albers, Sven MatthiesenT-MACH-105284 Mechanical Design III, Constructing the Team (S. 69) 0 Albert Albers, Sven MatthiesenT-MACH-105285 Mechanical Design IV, Constructing the Team (S. 70) 0 Albert Albers, Sven Matthiesen

Learning Control / ExaminationsMechanical Design I & II:Preliminary examination: Successful participation in workshops in the field of mechanical design I and IIWritten Examination concerning the teaching program of mechanical design I and II: duration 60 minMechanical Design III & IV:Preliminary examination: Successful participation in workshops in the field of mechanical design IIII and IVExamination concerning the teaching programm of mechanical design III and IV with

• written part duration 60 min and• design part duration 180 min.

Conditionsnone

Qualification ObjectivesThe students are able to . . .

• analyze the function of unknown machine elements.• use the interpretation and dimensioning guidelines according the common standardization regulations.• identify technical problems and to work out and evaluate systematic solutions.• illustrate problem solving’s in technical drawings and cad models according the common standardization regulations.• estimate the volume and time need of the given tasks and to split them between the team members.• synthesize the design steps of product engineering by means of a complex technical system.

ContentThe Mechanical Design Module provides an introduction to product development and teaches the basics of selected designand machine elements. The focus is on the basics of clutches, gears and gearing. At the same time, skills and tools forvisualization (technical drawing) are imparted.Workloadlectures and exercises: 174hhomework and preparation of examination: 426h


22


M Module: Machines and Processes (mach13BSc-Modul 13, MuP)[M-MACH-102566]

Responsibility: Heiko Kubach


Compulsory



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105208 Machines and Processes (S. 61) 7 Hans-Jörg Bauer, Heiko

Kubach, Ulrich Maas, BalazsPritz

T-MACH-105232 Machines and Processes, Prerequisite (S. 62) 0 Hans-Jörg Bauer, HeikoKubach, Ulrich Maas, BalazsPritz

Learning Control / Examinationswritten exam (3 h) and successful lab courseModule GradeGrade out of written exam (100%)ConditionsSuccessful lab course is a precondition to take part at the exam.

Qualification ObjectivesThe students can name and describe basic energy conversion processes and energy converting machines. They can explainthe application of these energy conversion processes in various machines. They can analyze and evaluate the processesand machines in terms of functionality and efficiency and they are able to solve basic technical problems in terms ofoperating the machines.


23


M Module: Production Operations Management [M-MACH-100297]

Responsibility: Kai Furmans


Compulsory



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-100304 Production Operations Management (S. 72) 5 Kai Furmans, Gisela Lanza,

Frank Schultmann

Learning Control / Examinationswritten examn, 90 min, graded

Qualification ObjectivesStudents are able to:

• describe the connections between production sience, work scheduling and -design, material flow and basics ofeconomics,

• differentiate between production systems and knows there characteristics,• design workplaces according to the requirements,• create a material flow system to ensure supply a production system according to the system parameters and• Evaluate necessary systems finacially.


24

4 MAJORS IN MECHANICAL ENGINEERING (INTERNATIONAL)

4 Majors in Mechanical Engineering (International)

M Module: MF A: Global Production Management [M-MACH-103351]

Responsibility: Gisela Lanza


Compulsory Elective

Contained in: Majors in Mechanical Engineering (International)

ECTS Recurrence Duration Language Version16 Each term 2 terms English 1

Compulsory

Identifier Course ECTS ResponsibilityT-MACH-106731 Global Production Engineering (MEI) (S. 58) 4 Gisela LanzaT-MACH-105379 Global Logistics (S. 57) 4 Kai Furmans

SP A: Globales ProduktionsmanagementNon-Compulsory Block; You must choose at least 8 credits.

Identifier Course ECTS ResponsibilityT-MACH-106733 SmartFactory@Industry (MEI) (S. 74) 4 Gisela LanzaT-MACH-105381 Virtual Engineering (Specific Topics) (S. 83) 4 Jivka OvtcharovaT-MACH-106732 Automated Production Systems (MEI) (S. 39) 4 Jürgen Fleischer

Learning Control / ExaminationsOral exams: duration approx. 5 min per credit pointAmount, type and scope of the success control can vary according to the individually choice.ConditionsNone

Qualification ObjectivesThe students acquire in the compulsory core subjects profound knowledge about the scientific theories, principles andmethods of Production Engineering. Afterwards they are able to evaluate and design complex production systems accordingto problems of manufacturing and process technologies, materials handling, handling techniques, information engineeringas well as production organisation and management.After completion this module, the students are able

• to analyse and solve planning and layout problems on the level of the enterprise, production, processes and worktasks,

• to plan and control a production,• to evaluate and configure the quality and efficiency of production, processes and products.

ContentThe aim of “SP A: Global Production Management” is to present the challenges of globally operating companies and togive an overview of the central aspects of global production networks as well as to gain in-depth knowledge of commonmethods and procedures for designing them. For this purpose, methods for site selection, approaches for the site-specificadaptation of production technologies as well as planning approaches for setting up a new production location will beimparted during the module. The module will be rounded off by presenting Industry 4.0 methods and technologies.The topics in detail are:


25


• Framework conditions and influencing factors of global production (historical development, goals, opportunities andrisks)

• Site selection• Site-specific production adaptation• Planning a new production site• Design and management of global production networks• Integration of Industry 4.0 methods and technologies

RecommendationsnoneWorkloadThe work load is about 480 hours, corresponding to 16 credit points.


26


M Module: MF B: Energy Engineering [M-MACH-103350]

Responsibility: Hans-Jörg Bauer


Compulsory Elective



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105220 Fundamentals of Energy Technology (S. 56) 8 Aurelian Florin Badea, Xu

Cheng

SP B: EnergietechnikNon-Compulsory Block; You must choose at least 8 credits.

Identifier Course ECTS ResponsibilityT-MACH-105213 Fundamentals of Combustion I (S. 55) 4 Ulrich Maas, Jörg SommererT-MACH-105292 Heat and Mass Transfer (S. 59) 4 Henning Bockhorn, Ulrich Maas

Learning Control / ExaminationsOral exams: duration approx. 5 min. per credit point.However, amount, type and scope of the success control can vary according to the individually choice.ConditionsNone

Qualification ObjectivesAfter completion of SP B students are able

• to describe the elements of an energy system and their interactions,• to list different conventional energy sources and assess their static range,• to name the fluctuating supply of renewable energies such as wind, solar radiation, ocean currents and tides etc.

and• describe its effects on the energy system,• to assess the technical boundary conditions of energy systems• to derive approaches for an optimal mix of different energy technologies,• to explain the operational principle of well-established power plants as well as of power plants based on renewables,• to name the physical and chemical processes during energy conversion

ContentThe aim of SP B “Energy Engineering” is to bring the students closer to the challenges of modern energy systems.The functional principles of conventional and regenerative power plant types are presented and the underlying physicalprinciples of technical combustion and heat and mass transfer are explained. The students learn the basics to evaluateenergy systems on a technical and economic basis.

Topics include:

• forms of energy


27


• energy sources: fossil fuels, nuclear energy, renewable energies• energy demand structures• principles of thermal and electrical power plants (conventional and renewable)• physical basics of technical combustion• stationary and transient heat and mass transfer phenomena• environmental aspects of energy production• role of renewable energies• conversion, transport and storage of energy• economic feasibility study of energy systems• future of the energy sector

WorkloadThe work load is about 480 hours, corresponding to 16 credit points.


28


M Module: MF C: Automotive Engineering [M-MACH-103349]

Responsibility: Frank Gauterin


Compulsory Elective



Compulsory

Identifier Course ECTS ResponsibilityT-MACH-100092 Automotive Engineering I (S. 40) 8 Frank Gauterin, Hans-Joachim

Unrau

SP C: KraftfahrzeugtechnikNon-Compulsory Block; You must choose at least 8 credits.

Identifier Course ECTS ResponsibilityT-MACH-102117 Automotive Engineering II (S. 41) 4 Frank Gauterin, Hans-Joachim

UnrauT-MACH-105154 Vehicle Comfort and Acoustics I (S. 81) 4 Frank GauterinT-MACH-105155 Vehicle Comfort and Acoustics II (S. 82) 4 Frank GauterinT-MACH-105210 Machine Dynamics (S. 60) 5 Carsten ProppeT-ETIT-100807 Electrical Machines (S. 48) 4 Klaus-Peter Becker

Learning Control / ExaminationsOral exams: duration approx. 5 min. per credit point.However, amount, type and scope of the success control can vary according to the individually choice.Conditionsnone

Qualification ObjectivesThe students know the movements and the forces at the vehicle and are familiar with active and passive safety. Theyhave proper knowledge about operation of engines and alternative drives, the necessary transmission between engine anddrive wheels and the power distribution. They have an overview of the components necessary for the drive and have thebasic knowledge, to analyse, to evaluate, and to develop the complex system “vehicle”.Further learning objectives according to the selected courses of supplementary subjects.Content1. History and future of the automobile

2. Driving mechanics: driving resistances and driving performance, mechanics of longitudinal and lateral forces, activeand passive safety

3. Drive systems: combustion engine, hybrid and electric drive systems

4. Transmissions: clutches (e.g. friction clutch, visco clutch), transmission (e.g. mechanical transmission, hydraulic fluid


29


transmission)

5.Power transmission and distribution: drive shafts, cardon joints, differentialsWorkloadThe work load is about 480 hours, corresponding to 16 credit points.


30

5 INTERNATIONAL PROJECT MANAGEMENT AND SOFT SKILLS

5 International Project Management and Soft Skills

M Module: International Project Management and Soft Skills [M-MACH-103322]

Responsibility: Barbara Deml, Stefan Nickel


Compulsory

Contained in: International Project Management and Soft Skills


Compulsory

Identifier Course ECTS ResponsibilityT-MACH-105296 Working Methods in Mechanical Engineering (S. 85) 4 Barbara DemlT-WIWI-108295 Project and Operations Management (S. 73) 2 Stefan Nickel

Learning Control / ExaminationsSuccess is monitored within the framework of academic achievements.ConditionsNone

Qualification Objectives

• The student gains knowledge of the principles and various instruments of project management and project planningand the acquisition of abilities to plan projects and create controlling systems.

• The student performs an analysis of various methods and procedures of multi-project management and projectcontrolling in a global context.

• The student acquires knowledge of the product development process as well as important parameters of productdevelopment and development methods in the context of project management.

ContentWorking Methods in Mechanical Engineering:1. Time and self management2. Teamwork3. Literature research4. Scientific Writing5. Scientific PresentationProject and Operations Management:Students will learn how to structure planning problems occurring in a company’s operations or in international projects.Moreover, they are introduced to fundamental quantitative planning techniques and tools for solving real-world projectand operations management problems.Topics of the lecture include:

• Introduction to optimization• Network planning techniques (CPM, PERT, stochastic time analysis etc.)• Inventory management (single- and multi-period models etc.)• Operations scheduling (single and parallel machine scheduling etc.)

LiteratureThe script and references are available for download on ILIAS.


31

5 INTERNATIONAL PROJECT MANAGEMENT AND SOFT SKILLS

WorkloadThe total workload for this module is approximately 180 hours. The total workload per course is obtained from theworkload contributing to lecture and exercise attendance, exam hours, and the required time which it takes for an averagestudent with average capacities to achieve the specified learning targets of this module.


32

Part II

CoursesT Course: Advanced Mathematics I [T-MATH-108266]

Responsibility: Maria Aksenovich, Stefan KühnleinContained in: [M-MACH-104162] Orientation Exam

[M-MATH-104022] Advanced Mathematics

ECTS Recurrence Exam type Version7 Jedes Semester Prüfungsleistung schriftlich 1

Learning Control / ExaminationsAssessment is carried out in form of a written examinations of 120 minutes length.ConditionsPassing scores for homework and the midterm test are prerequesites for the examination.Modeled ConditionsThe following conditions must be met:

• The course [T-MATH-108265] Advanced Mathematics I Prerequisite must have been passed.


33

T Course: Advanced Mathematics I Prerequisite [T-MATH-108265]

Responsibility: Maria Aksenovich, Stefan KühnleinContained in: [M-MATH-104022] Advanced Mathematics

ECTS Recurrence Exam type Version0 Jedes Wintersemester Studienleistung schriftlich 1

Learning Control / ExaminationsAssessment is carried out based on written homework assignments and a midterm test. Exact requirements will be detailedin class.ConditionsNone.


34

T Course: Advanced Mathematics II [T-MATH-108268]




• The course [T-MATH-108267] Advanced Mathematics II Prerequisite must have been passed.


35

T Course: Advanced Mathematics II Prerequisite [T-MATH-108267]


ECTS Recurrence Exam type Version0 Jedes Sommersemester Studienleistung schriftlich 1



36

T Course: Advanced Mathematics III [T-MATH-108270]




• The course [T-MATH-108269] Advanced Mathematics III Prerequisite must have been passed.


37

T Course: Advanced Mathematics III Prerequisite [T-MATH-108269]


ECTS Recurrence Exam type Version0 Jedes Wintersemester Studienleistung schriftlich 1



38

T Course: Automated Production Systems (MEI) [T-MACH-106732]

Responsibility: Jürgen FleischerContained in: [M-MACH-103351] MF A: Global Production Management

ECTS Recurrence Exam type Version4 Jedes Sommersemester Prüfungsleistung mündlich 1

Learning Control / Examinationsoral exam (20 min)Conditionsnone


39

T Course: Automotive Engineering I [T-MACH-100092]

Responsibility: Frank Gauterin, Hans-Joachim UnrauContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Language Recurrence Exam type Version8 Deutsch Jedes Wintersemester Prüfungsleistung schriftlich 2

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2113805 Automotive Engineering I Vorlesung (V) 4 Frank Gauterin,

Hans-Joachim Un-rau

Learning Control / ExaminationsWritten examination

Duration: 120 minutes

Auxiliary means: noneConditionsThe brick “T-MACH-102203 - Automotive Engineering I” is not started or finished. The bricks “T-MACH-100092 -Grundlagen der Fahrzeugtechnik I” and “T-MACH-102203 - Automotive Engineering I” can not be combined.


40

https://campus.studium.kit.edu/events/0xAF65ADE757C941439F90BD04C00180BA

T Course: Automotive Engineering II [T-MACH-102117]

Responsibility: Frank Gauterin, Hans-Joachim UnrauContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Language Recurrence Exam type Version4 Deutsch Jedes Sommersemester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2114835 Automotive Engineering II Vorlesung (V) 2 Hans-Joachim Un-

rau

Learning Control / ExaminationsWritten Examination

Duration: 90 minutes

Auxiliary means: noneConditionsnone


41

https://campus.studium.kit.edu/events/0xD5B008CF63EA4FA7A6E6B7B13DD0C154

T Course: Bachelor Thesis [T-MACH-108685]

Responsibility: Martin HeilmaierContained in: [M-MACH-103722] Bachelor Thesis

ECTS Recurrence Version12 Jedes Semester 1

Learning Control / ExaminationsThe bachelor thesis is designed to show that the student is able to deal with a problem of his/her subject area in anindependent manner and within the given period of time using scientific methods.The work load of the bachelor thesis corresponds to 12 ECTS. The maximal processing time of the bachelor thesis takesthree months. The date of issue of the subject has to be fixed by the supervisor and the student and to be put on recordat the examination board. The subject of the bachelor thesis may be only returned once and only within the first monthof processing time.On a reasoned request of the student, the examination board can extend the processing time by up to one month. If thebachelor thesis is not completed in time, this examination is “failed” (5,0), unless the student is not responsible.The bachelor thesis is to be evaluated by not less than a professor or a senior scientist according to § 14 Abs. 3 Ziff.1 KITG and another examiner. Generally, one of the two examiners is the person who has assigned the thesis. If theexaminers do not agree, the bachelor thesis is graded by the examination board within this assessment; another expertcan be appointed too. The bachelor thesis has to be graded within a period of six weeks after the submission.ConditionsThe requirement for admission to the bachelor thesis module are 120 ECTS. As to exceptions, the examination boarddecides on a request of the student (see § 14 (1) SPO).

RemarksThe workload for the preparation of the bachelor thesis is about 360 hours.


42

T Course: Basics in Measurement and Control Systems [T-MACH-104745]

Responsibility: Christoph StillerContained in: [M-MACH-102564] Measurement and Control Systems

ECTS Language Recurrence Exam type Version7 Deutsch/Englisch Jedes Wintersemester Prüfungsleistung schriftlich 2

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2137301 Measurement and Control Systems Vorlesung (V) 3 Christoph StillerWS 17/18 2137302 Übung (Ü) 1 Christoph Burger,

Johannes Janoso-vits, Maximil-ian Naumann,Christoph Stiller

WS 17/18 3137020 Measurement and Control Systems Vorlesung (V) 3 Christoph StillerWS 17/18 3137021 Measurement and Control Systems (Tuto-

rial)Übung (Ü) 1 Christoph Burger,

Johannes Janoso-vits, ChristophStiller

Learning Control / Examinationswritten exam2,5 hoursConditionsnone


43

https://campus.studium.kit.edu/events/0x122D442F29BB482296CC205DCA8E8054

https://campus.studium.kit.edu/events/0x48133B81910C474C942FA68651A7A4C8

https://campus.studium.kit.edu/events/0x8131128A50B445E5A3DEDFD4AD63B453

https://campus.studium.kit.edu/events/0x20D81AC8A21A4527929B9CD6A61ABC1E

T Course: Basics of Manufacturing Technology (MEI) [T-MACH-108747]

Responsibility: Volker Schulze, Frederik ZangerContained in: [M-MACH-104232] Manufacturing Processes (MEI)

ECTS Recurrence Version4 Jedes Wintersemester 1

Learning Control / Examinationswritten exam (duration: 60 min)Conditionsnone


44

T Course: Computer Science for Engineers [T-MACH-105205]

Responsibility: Jivka OvtcharovaContained in: [M-MACH-102563] Computer Science

ECTS Language Recurrence Exam type Version6 Deutsch/englisch Jedes Sommersemester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2121390 Computer Science for Engineers Vorlesung / Übung

(VÜ)4 Jivka Ovtcharova

SS 2017 2121391 Exercises Computer Science for Engineers Übung (Ü) 2 Mitarbeiter, JivkaOvtcharova

WS 17/18 3121035 Übung (Ü) 2 Mitarbeiter, JivkaOvtcharova

Learning Control / ExaminationsWritten exam [180 min]ConditionsComputer Science for Engineers, passedModeled ConditionsThe following conditions must be met:

• The course [T-MACH-105206] Computer Science for Engineers must have been passed.


45

https://campus.studium.kit.edu/events/0xADACA5CDFBA54669A7231F07E1E85A4E

https://campus.studium.kit.edu/events/0x555C38F1CC6D4B2EAE31BA2B92EB6792

https://campus.studium.kit.edu/events/0x328686B808C0453EBDC0461E7492E47B

T Course: Computer Science for Engineers [T-MACH-105206]

Responsibility: Jivka OvtcharovaContained in: [M-MACH-102563] Computer Science

ECTS Language Recurrence Exam type Version0 Deutsch Jedes Sommersemester Studienleistung praktisch 2

Events

Term Event-No. Events Type SWS LecturersSS 2017 2121392 Computer Lab for Computer Science in

Mechanical EngineeringPraktische Übung(PÜ)

2 Mitarbeiter, JivkaOvtcharova

WS 17/18 2121392 Computer Lab for Computer Science inMechanical Engineering

Praktische Übung(PÜ)


WS 17/18 3121036 Praktische Übung(PÜ)


Learning Control / ExaminationsProgramming assignments, that are to be implemented at the computer, are given every two weeks. The students aresupervised by tutors while they work on the assignments. Therefore online tests must be solved by the students to assessthe understanding of the tasks and the lecture material. All assignments have to be handed in, before they can take partin the exam.Conditionsnone


46

https://campus.studium.kit.edu/events/0xD455A288656C4A508D87B3F2E1330674

https://campus.studium.kit.edu/events/0xFF7B2B3DCF564CD19FCB46AF2D549F62

https://campus.studium.kit.edu/events/0x8F6E5EFCC2964F5D9DF34E1C0EAB742A

T Course: Electrical Engineering and Electronics [T-ETIT-108386]

Responsibility: Klaus-Peter BeckerContained in: [M-ETIT-104049] Electrical Engineering

ECTS Recurrence Exam type Version8 Jedes Wintersemester Prüfungsleistung schriftlich 1

Learning Control / ExaminationsWritten exam, duration 3 hours.Conditionsnone


47

T Course: Electrical Machines [T-ETIT-100807]

Responsibility: Klaus-Peter BeckerContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Exam type Version4 Prüfungsleistung mündlich 1


48

T Course: Engineering Mechanics I [T-MACH-100282]

Responsibility: Thomas Böhlke, Tom-Alexander LanghoffContained in: [M-MACH-104162] Orientation Exam

[M-MACH-102572] Engineering Mechanics


Events

Term Event-No. Events Type SWS LecturersWS 17/18 2161245 Engineering Mechanics I Vorlesung (V) 3 Thomas BöhlkeWS 17/18 3161010 Vorlesung (V) 3 Thomas Böhlke,

Tom-AlexanderLanghoff

Learning Control / Examinationswritten exam, 90 min, gradedConditionssuccessful participation in “Engineering Mechanics I (Tutorial)” (see T-MACH-100528)Modeled ConditionsThe following conditions must be met:

• The course [T-MACH-100528] Tutorial Engineering Mechanics I must have been passed.


49

https://campus.studium.kit.edu/events/0x55D64C9F7B8D4F779A4F9ADC2872FF3E

https://campus.studium.kit.edu/events/0x5F8FE7FF4CA5400BA86657628900A9D2

T Course: Engineering Mechanics II [T-MACH-100283]

Responsibility: Thomas Böhlke, Tom-Alexander LanghoffContained in: [M-MACH-104162] Orientation Exam

[M-MACH-102572] Engineering Mechanics

ECTS Language Recurrence Exam type Version6 Deutsch/Englisch Jedes Sommersemester Prüfungsleistung schriftlich 2

Events

Term Event-No. Events Type SWS LecturersSS 2017 2162250 Engineering Mechanics II Vorlesung (V) 3 Thomas BöhlkeSS 2017 3162010 Vorlesung (V) 2 Thomas Böhlke,

Tom-AlexanderLanghoff

Learning Control / Examinationswritten exam, 90 min, gradedConditionssuccessful participation in “Engineering Mechanics II (Tutorial)” (see T-MACH-100284)Modeled ConditionsThe following conditions must be met:

• The course [T-MACH-100284] Tutorial Engineering Mechanics II must have been passed.


50

https://campus.studium.kit.edu/events/0x64AFBEC005B7486CAAAB6BE1BD152253

https://campus.studium.kit.edu/events/0x9BD21A64A5764B359BBA109814301924

T Course: Engineering Mechanics III & IV [T-MACH-105201]

Responsibility: Wolfgang SeemannContained in: [M-MACH-102572] Engineering Mechanics

ECTS Language Recurrence Exam type Version10 Deutsch/englisch Jedes Wintersemester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2162231 Engineering Mechanics IV Vorlesung (V) 2 Wolfgang SeemannSS 2017 3162012 Vorlesung (V) 2 Wolfgang SeemannWS 17/18 2161203 Engineering Mechanics III Vorlesung (V) 2 Wolfgang SeemannWS 17/18 3161012 Vorlesung (V) 2 Wolfgang Seemann

Modeled ConditionsThe following conditions must be met:

1. The course [T-MACH-105202] Tutorial Engineering Mechanics III must have been passed.2. The course [T-MACH-105203] Tutorial Engineering Mechanics IV must have been passed.


51

https://campus.studium.kit.edu/events/0x4872BEC5183646D29BF3C510003716CE

https://campus.studium.kit.edu/events/0x8141EC1723474CA28C505AF10AB9611E

https://campus.studium.kit.edu/events/0xF805630D4B81406FAC810A51504A1D27

https://campus.studium.kit.edu/events/0xD4A16AF12CD84978BAC256679BD49CC2

T Course: Excercises in Technical Thermodynamics and Heat Transfer I[T-MACH-105204]

Responsibility: Ulrich MaasContained in: [M-MACH-102574] Technical Thermodynamics

ECTS Language Recurrence Exam type Version0 Deutsch/Englisch Jedes Wintersemester Studienleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2165502 Exercise course Technical Thermodynamics

and Heat Transfer IÜbung (Ü) 2 Ulrich Maas

WS 17/18 3165015 Technical Thermodynamics and Heat Trans-fer I (Tutorial)

Übung (Ü) 2 Ulrich Maas, RobertSchießl

Learning Control / ExaminationsHomework is mandatory.


52

https://campus.studium.kit.edu/events/0x0A225EDEC51944EA9473556D2B751A7A

https://campus.studium.kit.edu/events/0xA0DC980588824487BD8CC989759D4182

T Course: Excercises in Technical Thermodynamics and Heat Transfer II[T-MACH-105288]


ECTS Language Recurrence Exam type Version0 Deutsch Jedes Sommersemester Studienleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2166556 Technical Thermodynamics and Heat Trans-

fer II (Tutorial)Übung (Ü) 2 Ulrich Maas

SS 2017 3166033 Technical Thermodynamics and Heat Trans-fer II (Tutorial)

Übung (Ü) 2 Ulrich Maas, RobertSchießl

Learning Control / ExaminationsHomework is mandatory.Conditionsnone


53

https://campus.studium.kit.edu/events/0xDD3142F1376F4537A69BAC11D811B9F5

https://campus.studium.kit.edu/events/0x638E6BA4CE8C43ACA4EDC0F6A02D8E5E

T Course: Fluid Mechanics [T-MACH-105207]

Responsibility: Bettina FrohnapfelContained in: [M-MACH-102565] Fluid Mechanics


Events

Term Event-No. Events Type SWS LecturersSS 2017 2154512 Fluid Mechanics I Vorlesung / Übung

(VÜ)3 Bettina Frohnapfel

WS 17/18 2153512 Fluid Mechanics II Vorlesung / Übung(VÜ)

3 Bettina Frohnapfel

WS 17/18 3153511 Strömungstechnik II Vorlesung (V) Bettina Frohnapfel

Learning Control / Examinationswritten examConditionsnone


54

https://campus.studium.kit.edu/events/0x1ACD0A678B10457D8634C6C4B1EB08A0

https://campus.studium.kit.edu/events/0xC924D111A72F4BDAB87C02AF0A17C620

https://campus.studium.kit.edu/events/0xED083D850A4B40B89A8FC73BC216498F

T Course: Fundamentals of Combustion I [T-MACH-105213]

Responsibility: Ulrich Maas, Jörg SommererContained in: [M-MACH-103350] MF B: Energy Engineering


Events

Term Event-No. Events Type SWS LecturersWS 17/18 2165515 Fundamentals of Combustion I Vorlesung (V) 2 Ulrich MaasWS 17/18 2165517 Fundamentals of Combustion I (Tutorial) Übung (Ü) 1 Ulrich Maas

Learning Control / ExaminationsWritten exam, 3 hConditionsnone


55

https://campus.studium.kit.edu/events/0x29F2BE561A464D839580D47F926D1313

https://campus.studium.kit.edu/events/0xAF626962AB36454A8B118D852B64BD57

T Course: Fundamentals of Energy Technology [T-MACH-105220]

Responsibility: Aurelian Florin Badea, Xu ChengContained in: [M-MACH-103350] MF B: Energy Engineering

ECTS Language Recurrence Exam type Version8 Deutsch/Englisch Jedes Sommersemester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2130927 Fundamentals of Energy Technology Vorlesung (V) 3 Aurelian Florin

Badea, Xu ChengSS 2017 3190923 Fundamentals of Energy Technology Vorlesung (V) 3 Aurelian Florin

Badea

Learning Control / ExaminationsWritten examination, 90 minConditionsnone


56

https://campus.studium.kit.edu/events/0x2681E6206FDA445AA7EF5CF537767D92

https://campus.studium.kit.edu/events/0xD71E1582B2D44B4DB0D75B1C2532FB7E

T Course: Global Logistics [T-MACH-105379]

Responsibility: Kai FurmansContained in: [M-MACH-103351] MF A: Global Production Management

ECTS Recurrence Exam type Version4 Jedes Sommersemester Prüfungsleistung mündlich 1

Learning Control / Examinationsoral exam (20 min)Conditionsnone


57

T Course: Global Production Engineering (MEI) [T-MACH-106731]

Responsibility: Gisela LanzaContained in: [M-MACH-103351] MF A: Global Production Management

ECTS Language Recurrence Exam type Version4 Englisch Jedes Sommersemester Prüfungsleistung mündlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 3150040 Global Production Engineering (MEI) Vorlesung (V) 2 Gisela Lanza, Nicole

Stricker

Learning Control / Examinationsoral exam (45 min group examination with 3 students)Conditionsnone


58

https://campus.studium.kit.edu/events/0x8A773EC939CC4BC6AF603CBB9DA04F42

T Course: Heat and Mass Transfer [T-MACH-105292]

Responsibility: Henning Bockhorn, Ulrich MaasContained in: [M-MACH-103350] MF B: Energy Engineering

ECTS Language Recurrence Exam type Version4 Deutsch Jedes Semester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 3122512 Vorlesung (V) 2 Henning BockhornWS 17/18 2165512 Heat and mass transfer Vorlesung (V) 2 Ulrich Maas

Learning Control / ExaminationsWritten exam, 3 hConditionsnone


59

https://campus.studium.kit.edu/events/0x04BF7BE0B6BB452CAA7DBE0AA64EE509

https://campus.studium.kit.edu/events/0xCE83760B299E4D55B362348F649370D4

T Course: Machine Dynamics [T-MACH-105210]

Responsibility: Carsten ProppeContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Language Recurrence Exam type Version5 Englisch Jedes Sommersemester Prüfungsleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2161224 Machine Dynamics Vorlesung (V) 2 Carsten ProppeSS 2017 2161225 Übung (Ü) 1 Maxime Koebele,

Carsten Proppe

Learning Control / Examinationswritten exam, 180 min.Conditionsnone


60

https://campus.studium.kit.edu/events/0x87E302A05D9E4BD484E4852D3EEC8820

https://campus.studium.kit.edu/events/0xCF7BD2C4D9144B91AC71BCEEFB88B06E

T Course: Machines and Processes [T-MACH-105208]

Responsibility: Hans-Jörg Bauer, Heiko Kubach, Ulrich Maas, Balazs PritzContained in: [M-MACH-102566] Machines and Processes


Events

Term Event-No. Events Type SWS LecturersWS 17/18 2185000 Machines and Processes Vorlesung / Übung

(VÜ)4 Hans-Jörg Bauer,

Martin Gabi, HeikoKubach, UlrichMaas

Learning Control / Examinationswritten exam (duration: 120 min)ConditionsTaking part at the exam is possible only when lab course has been successfully completedModeled ConditionsThe following conditions must be met:

• The course [T-MACH-105232] Machines and Processes, Prerequisite must have been passed.


61

https://campus.studium.kit.edu/events/0x9744BCFE28B94FBF8A18863A69BD5D20

T Course: Machines and Processes, Prerequisite [T-MACH-105232]

Responsibility: Hans-Jörg Bauer, Heiko Kubach, Ulrich Maas, Balazs PritzContained in: [M-MACH-102566] Machines and Processes

ECTS Recurrence Exam type Version0 Jedes Semester Studienleistung 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2187000 Machinery and Processes Praktikum (P) 1 Hans-Jörg Bauer,

Martin Gabi, HeikoKubach, UlrichMaas

WS 17/18 2187000 Machinery and Processes Praktikum (P) 1 Hans-Jörg Bauer,Martin Gabi, HeikoKubach, UlrichMaas

Learning Control / Examinationssuccessful completed training courseConditionsnone


62

https://campus.studium.kit.edu/events/0xA9C8DBC79549463AB65F33638C07097F

https://campus.studium.kit.edu/events/0xD01550ADDE834516967CB2AE0C7B7408

T Course: Materials Science I & II [T-MACH-105145]

Responsibility: Jens Gibmeier, Martin Heilmaier, Kay WeidenmannContained in: [M-MACH-102562] Materials Science

ECTS Language Recurrence Exam type Version11 Deutsch/Englisch Jedes Wintersemester Prüfungsleistung mündlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2174560 Materials Science and Engineering II for

mach, physVorlesung (V) 3 Martin Heilmaier,

Hans Jürgen Seifert,Sven Ulrich

SS 2017 3174015 Vorlesung (V) 3 Jens GibmeierSS 2017 3174026 Übung (Ü) 1 Jens Gibmeier,

MitarbeiterWS 17/18 2173550 Materials Science and Engineering I for

mach, physVorlesung (V) 4 Hans Jürgen Seifert,

Sven UlrichWS 17/18 3173008 Vorlesung (V) 4 Jens GibmeierWS 17/18 3173009 Übung (Ü) 1 Jens Gibmeier

Learning Control / Examinationsoral examModeled ConditionsThe following conditions must be met:

• The course [T-MACH-105146] Materials Science Lab Course must have been passed.


63

https://campus.studium.kit.edu/events/0xE71ABDA8F81D470F944C51737744AACF

https://campus.studium.kit.edu/events/0x0CE60983F6A7469A8B8453CF272A80C4

https://campus.studium.kit.edu/events/0xAE668356E2874B0EBCE20AFCF6CB3BF5

https://campus.studium.kit.edu/events/0x386A8D9EAA0E4698ACA5EEB3B3247174

https://campus.studium.kit.edu/events/0xB8BADE33166E4DA39EBE0B4E6865CF11

https://campus.studium.kit.edu/events/0x50F32CA160FF4399BDDACEC0CFF764B7

T Course: Materials Science Lab Course [T-MACH-105146]

Responsibility: Martin Heilmaier, Anton Möslang, Kay WeidenmannContained in: [M-MACH-102562] Materials Science

ECTS Language Recurrence Exam type Version3 Deutsch/Englisch Jedes Sommersemester Studienleistung praktisch 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2174587 Experimental Lab Course in Material Sci-

ence, part B of classPraktikum (P) 3 Stefan Dietrich,

Jens Gibmeier,Martin Heilmaier,Karl-Heinz Lang,Kay Weidenmann

SS 2017 2174597 Experimental Lab Course in Material Sci-ence, part A of class

Praktikum (P) 3 Stefan Dietrich,Jens Gibmeier,Martin Heilmaier,Karl-Heinz Lang,Kay Weidenmann

SS 2017 3174016 Praktikum (P) 3 Stefan Dietrich,Jens Gibmeier,Martin Heilmaier,Karl-Heinz Lang,Kay Weidenmann

Learning Control / ExaminationsOral colloquium at the beginning of each topic; certificate of successful attendance.Conditionsnone

RemarksThe workload for the lab course Materials Science is 90 h in total and consists of the presence during the 10 experiments(one week half-time, 4 hours per day) as well as preparation and rework time at home.


64

https://campus.studium.kit.edu/events/0x3AB3FA00231747F4AD152EC2374B90CF

https://campus.studium.kit.edu/events/0x2B26FB26E34A42E6AA3DF1B6D8CE2236

https://campus.studium.kit.edu/events/0x236953AD06654A5A85BD08EA1B57053C

T Course: Mechanical Design I & II [T-MACH-105286]

Responsibility: Albert Albers, Norbert Burkardt, Sven MatthiesenContained in: [M-MACH-102573] Mechanical Design


Events

Term Event-No. Events Type SWS LecturersSS 2017 2146178 Mechanical Design II Vorlesung (V) 2 Sven MatthiesenSS 2017 3146017 Vorlesung (V) 2 Albert Albers, Nor-

bert BurkardtWS 17/18 2145178 Mechanical Design I Vorlesung (V) 2 Albert Albers,

Matthias BehrendtWS 17/18 2145186 Vorlesung (V) 2 Albert Albers, Nor-

bert Burkardt

Learning Control / Examinationswritten exam, graded, duration: 60 minConditionsAdmission to the exam only with successful completion of the T-MACH-105282 - Mechanical Design I, prerequisites andT-MACH-105283 - Mechanical Design II, prerequisites.Modeled ConditionsThe following conditions must be met:

1. The course [T-MACH-105282] Mechanical Design I, prerequisites must have been passed.2. The course [T-MACH-105283] Mechanical Design II, prerequisites must have been passed.


65

https://campus.studium.kit.edu/events/0xB996EDD23A134F64A4E6AA23351E8488

https://campus.studium.kit.edu/events/0xDF09F68430F4445DA4322653BA419509

https://campus.studium.kit.edu/events/0x8EB3DFC1BE2A4CBEBFDA69E667DBBFAF

https://campus.studium.kit.edu/events/0x58E6340DBC304E7A93C0A904CEDC058D

T Course: Mechanical Design I, prerequisites [T-MACH-105282]

Responsibility: Albert Albers, Sven MatthiesenContained in: [M-MACH-102573] Mechanical Design

ECTS Language Recurrence Exam type Version0 Deutsch/Englisch Jedes Wintersemester Studienleistung 1

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2145185 Tutorials Mechanical Design I Übung (Ü) 1 Albert Albers, Mi-

tarbeiterWS 17/18 2145187 Übung (Ü) 2 Albert Albers, Nor-

bert Burkardt

Learning Control / ExaminationsConcomitant to the lecture, a workshop with 3 workshop sessions takes place over the semester. During the workshopthe students are divided into groups and their mechanical design knowledge will be tested during a colloquium at thebeginning of every single workshop session. The attendance is mandatory and will be controlled. The pass of the colloquiaand the process of the workshop task are required for the successful participation.Furthermore an online test is carried out.Conditionsnone


66

https://campus.studium.kit.edu/events/0xA630A4F3E4314239A70BEF040E374926

https://campus.studium.kit.edu/events/0x3F19D7D4527443FBBA7F2ADABEB132DE

T Course: Mechanical Design II, prerequisites [T-MACH-105283]


ECTS Language Recurrence Exam type Version0 Deutsch/Englisch Jedes Sommersemester Studienleistung 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2146185 Tutorials Mechanical Design II Übung (Ü) 2 Sven Matthiesen,

MitarbeiterSS 2017 3146018 Übung (Ü) 2 Albert Albers, Mi-

tarbeiter

Learning Control / ExaminationsConcomitant to the lecture, 2 online tests are carried out and the knowledge from the lecture will be tested. The knowledgefrom mechanical design I and II will further be controlled with a design and a CAD task.ConditionsNone


67

https://campus.studium.kit.edu/events/0x77470AC7F08D4BDF843117CA13B4169B

https://campus.studium.kit.edu/events/0xEAC3F1CE86F2488DA80E307CD71F4E38

T Course: Mechanical Design III & IV [T-MACH-104810]

Responsibility: Albert Albers, Norbert Burkardt, Sven MatthiesenContained in: [M-MACH-102573] Mechanical Design


Events

Term Event-No. Events Type SWS LecturersSS 2017 2146177 Mechanical Design IV Vorlesung (V) 2 Albert Albers, Nor-

bert BurkardtSS 2017 3146020 Vorlesung (V) 2 Albert Albers, Nor-

bert BurkardtWS 17/18 2145151 Mechanical Design III Vorlesung (V) 2 Sven Matthiesen,

MitarbeiterWS 17/18 3145016 Vorlesung (V) 2 Albert Albers, Nor-

bert Burkardt

Learning Control / Examinationswritten exam consisting of:

• written part duration 60 min and• design part duration 180 min

Sum: 240 minConditionsAdmission to the exam only with successful completion of the T-MACH-105284 - Mechanical Design III, Constructing theTeam and T-MACH-105285 - Mechanical Design IV, Constructing the Team.Modeled Conditions1 of 2 conditions must be met:

1. The course [T-MACH-105284] Mechanical Design III, Constructing the Team must have been passed.2. The course [T-MACH-105285] Mechanical Design IV, Constructing the Team must have been passed.


68

https://campus.studium.kit.edu/events/0x5E698F830EA8410BBA45DE95A68A0ED6

https://campus.studium.kit.edu/events/0x229433FAB03A4695988F2658E11C75F5

https://campus.studium.kit.edu/events/0x1A7B84FA4D7A4C239E76CECA03881FB5

https://campus.studium.kit.edu/events/0x057AF364D72B485D99077D51D9B5027D

T Course: Mechanical Design III, Constructing the Team [T-MACH-105284]



Events

Term Event-No. Events Type SWS LecturersWS 17/18 2145153 Tutorials Mechanical Design III Übung (Ü) 2 Sven Matthiesen,

MitarbeiterWS 17/18 3145017 Übung (Ü) 2 Albert Albers, Nor-

bert BurkardtWS 17/18 3145018 Seminar / Praktikum

(S/P)Albert Albers, Nor-bert Burkardt

Learning Control / ExaminationsConcomitant to the lecture, a workshop with 3 workshop sessions takes place over the semester. During the workshopthe students are divided into groups and their mechanical design knowledge will be tested during a colloquium at thebeginning of every single workshop session. The attendance is mandatory and will be controlled. The pass of the colloquiaand the process of the workshop task are required for the successful participation.ConditionsNone


69

https://campus.studium.kit.edu/events/0xE391D30688A14A1B8344A4BF66A1A19D

https://campus.studium.kit.edu/events/0x6E8E7ABE1CF644E1A433A0B92702E8C8

https://campus.studium.kit.edu/events/0x44880439C3F242469E1631CC82C9C4A1

T Course: Mechanical Design IV, Constructing the Team [T-MACH-105285]



Events

Term Event-No. Events Type SWS LecturersSS 2017 2146184 Tutorials Mechanical Design IV Übung (Ü) 2 Albert Albers, Mi-

tarbeiterSS 2017 3146021 Übung (Ü) 1 Albert Albers, Mi-

tarbeiterSS 2017 3146022 Praktische Übung

(PÜ)1 Albert Albers, Mi-

tarbeiter

Learning Control / ExaminationsConcomitant to the lecture, a workshop with 3 workshop sessions takes place over the semester. During the workshopthe students are divided into groups and their mechanical design knowledge will be tested during a colloquium at thebeginning of every single workshop session. The attendance is mandatory and will be controlled. The pass of the colloquiaand the process of the workshop task are required for the successful participation.ConditionsNone


70

https://campus.studium.kit.edu/events/0xEBB30D26167E48DC8F1AB84F7D65538E

https://campus.studium.kit.edu/events/0x87EB1FA021864E2EA0C6D2347F19EEB3

https://campus.studium.kit.edu/events/0x9D3645DC7B224EC882A2C55B1FCB4DF0

T Course: Presentation [T-MACH-108684]

Responsibility: Martin HeilmaierContained in: [M-MACH-103722] Bachelor Thesis

ECTS Recurrence Exam type Version3 Jedes Semester Studienleistung mündlich 1

Learning Control / ExaminationsThe colloquium presentation must be held within 6 weeks after the submission of the bachelor thesis. The presentationshould last around 20 minutes followed by a scientific discussion with the present expert audience. The students shouldshow that they are able to independently present and discuss the content of their bachelor thesis according to scientificcriteria.ConditionsBachelor Thesis has been startedModeled ConditionsThe following conditions must be met:

• The course [T-MACH-108685] Bachelor Thesis must have been started.

RemarksThe workload for the presentation of the bachelor thesis is about 90 hours.


71

T Course: Production Operations Management [T-MACH-100304]

Responsibility: Kai Furmans, Gisela Lanza, Frank SchultmannContained in: [M-MACH-100297] Production Operations Management


Events

Term Event-No. Events Type SWS LecturersSS 2017 2110085 Production Operations Management Vorlesung / Übung

(VÜ)4 Kai Furmans, Gisela

LanzaSS 2017 3118031 Production Operations Management Vorlesung (V) 4 Kai Furmans,

Gisela Lanza, FrankSchultmann

WS 17/18 2110085 Production Operations Management Vorlesung / Übung(VÜ)

4 Kai Furmans, GiselaLanza

Learning Control / Examinationswritten examConditionsnone


72

https://campus.studium.kit.edu/events/0xC03E7FEF9ED64A49AD6B72E274976DD3

https://campus.studium.kit.edu/events/0xCC123C2E5E8C4026A21DDB6B2AB0E3D6

https://campus.studium.kit.edu/events/0x7796D74F93F6474587BA9AA37FC05173

T Course: Project and Operations Management [T-WIWI-108295]

Responsibility: Stefan NickelContained in: [M-MACH-103322] International Project Management and Soft Skills

ECTS Recurrence Exam type Version2 Jedes Wintersemester Studienleistung 1

Learning Control / ExaminationsUngraded, the valuation is composed of:

• 50% written exam• 25% workshop• 25% case study

ConditionsNone

RemarksDescription:Operations management (OM) describes the process of planning and controlling the resources needed to produce acompany’s products or services. While OM focuses on ongoing operations, project management (PM) is concerned withplanning and controlling a set of activities with a defined start and end state. The objective of the first part (PM) of thecourse is to acquaint students with quantitative planning methods to analyze the network structure of large projects, i.e.,to identify “critical” project activities, interdependencies between them, and their impact on key performance indicators(e.g., time and cost).In the second part (OM) of the lecture, two major operational issues are discussed, inventory management and operationsscheduling. Students will learn about basic decisions arising in inventory management and operations scheduling, andtypical constraints (such as demand or capacity constraints) which have to be taken into account. Throughout thecourse, students will be given the opportunity to gain practical problem solving skills in short cases and exercises. Theywill be taught how to use modeling languages in combination with current software tools in order to implement and solvereal-world mixed-integer programming models.Content:Students will learn how to structure planning problems occurring in a company’s operations or in international projects.Moreover, they are introduced to fundamental quantitative planning techniques and tools for solving real-world projectand operations management problems.Topics of the lecture include:

• Introduction to optimization• Network planning techniques (CPM, PERT, stochastic time analysis etc.)• Inventory management (single- and multi-period models etc.)• Operations scheduling (single and parallel machine scheduling etc.)

Learning Targets:Participants are capable of

• Formulating basic optimization problems frequently occurring in project and operations management contexts(including linear and integer programming, dynamic programming).

• Systematically examining the network structure of large projects (including identification of relationships betweenproject activities, analysis of time-critical activities, computing expected project duration and costs etc.).

• Distinguishing between the different types and uses of inventory as well as the relevant costs associated withinventory.

• Recognizing the fundamental trade-offs in inventory management.• Calculating order quantities in case of constant and time-varying demand.• Classifying various kinds of scheduling problems in short-term production planning• Sequencing jobs based on priority rules• Developing schedules for single, parallel, and multiple machines.


73

T Course: SmartFactory@Industry (MEI) [T-MACH-106733]

Responsibility: Gisela LanzaContained in: [M-MACH-103351] MF A: Global Production Management

ECTS Recurrence Exam type Version4 Jedes Sommersemester Studienleistung 1

Learning Control / Examinationsalternative test achievement (graded)

• colloquium (approx. 15 min)• presentation (approx. 20 min)

ConditionsSuccessful completion of the following courses:

• M-MACH-102563 - Computer Science• MACH-102573 - Mechanical Design

Modeled ConditionsThe following conditions must be met:

1. The module [M-MACH-102563] Computer Science must have been passed.2. The module [M-MACH-102573] Mechanical Design must have been passed.


74

T Course: Technical Thermodynamics and Heat Transfer I [T-MACH-104747]



Events

Term Event-No. Events Type SWS LecturersWS 17/18 2165501 Technical Thermodynamics and Heat Trans-

fer IVorlesung (V) 3 Ulrich Maas

WS 17/18 3165014 Technical Thermodynamics and Heat Trans-fer I

Vorlesung (V) 3 Ulrich Maas, RobertSchießl

Learning Control / ExaminationsWritten exam [duration: 180 min]ConditionsSuccessful participation in the tutorial (T-MACH-105204 - Excercises in Technical Thermodynamics and Heat TransferI)Modeled ConditionsThe following conditions must be met:

• The course [T-MACH-105204] Excercises in Technical Thermodynamics and Heat Transfer I must have been passed.


75

https://campus.studium.kit.edu/events/0xD530AF84494F4200A2888329641D9717

https://campus.studium.kit.edu/events/0xA126D2F8771D4A9899E1CBA149C8BEA3

T Course: Technical Thermodynamics and Heat Transfer II [T-MACH-105287]



Events

Term Event-No. Events Type SWS LecturersSS 2017 2166526 Technical Thermodynamics and Heat Trans-

fer IIVorlesung (V) 3 Ulrich Maas

SS 2017 3166526 Vorlesung (V) 3 Robert Schießl

Learning Control / ExaminationsWritten exam [duration: 180 min]ConditionsSuccessful participation in the tutorial (T-MACH-105288 - Exercises in Technical Thermodynamics and Heat Transfer II)Modeled ConditionsThe following conditions must be met:

• The course [T-MACH-105288] Excercises in Technical Thermodynamics and Heat Transfer II must have been passed.


76

https://campus.studium.kit.edu/events/0xC00451D4383844518336AC73B3A78DC8

https://campus.studium.kit.edu/events/0xD6185FCFCD4A434DA00D5FA582788666

T Course: Tutorial Engineering Mechanics I [T-MACH-100528]

Responsibility: Thomas Böhlke, Tom-Alexander LanghoffContained in: [M-MACH-102572] Engineering Mechanics


Events

Term Event-No. Events Type SWS LecturersWS 17/18 2161246 Tutorial Engineering Mechanics I Übung (Ü) 2 Róbert Bertóti,

Thomas Böhlke,Johannes Görthofer,Andreas Prahs

WS 17/18 3161011 Übung (Ü) 2 Maria LoredanaKehrer, JulianeLang, Tom-Alexander Langhoff,Malte Schemmann

Learning Control / ExaminationsAttestations have to be achieved in the following four categories: mandatory written homework problems, writtenhomework problems, computational homework problems, colloquia.This course is passed if all mandatory written homework problems are passed and if in the other three categories (writtenhomework problems, computational homework problems, colloquia) in total at most three attestations have been finallynot passed, at most one in each of the three categories.Succesful participation in this course allows for registration to the Exam “Engineering Mechanics I” (see T-MACH-100282)ConditionsNone


77

https://campus.studium.kit.edu/events/0x053BD1BA0BCC4E6188CA9643B456D32A

https://campus.studium.kit.edu/events/0x6396A6C6EEA84ACCA461B1B451CD04AD

T Course: Tutorial Engineering Mechanics II [T-MACH-100284]

Responsibility: Thomas Böhlke, Tom-Alexander LanghoffContained in: [M-MACH-102572] Engineering Mechanics

ECTS Language Recurrence Exam type Version0 Deutsch/Englisch Jedes Sommersemester Studienleistung schriftlich 2

Events

Term Event-No. Events Type SWS LecturersSS 2017 2162251 Tutorial Engineering Mechanics II Übung (Ü) 2 Thomas Böhlke,

Andreas Prahs,Malte Schemmann

SS 2017 3162011 Übung (Ü) 2 Tom-AlexanderLanghoff, Kon-stantin Priesnitz

Learning Control / ExaminationsAttestations have to be achieved in the following four categories: mandatory written homework problems, writtenhomework problems, computational homework problems, colloquia.This course is passed if all mandatory written homework problems are passed and if in the other three categories (writtenhomework problems, computational homework problems, colloquia) in total at most two attestations have been finallynot passed, at most one in each of the three categories.Succesful participation in this course allows for registration to the Exam “Engineering Mechanics II” (see T-MACH-100283)ConditionsNone


78

https://campus.studium.kit.edu/events/0x847C02E1CBEB47318D7CDEC91E338B44

https://campus.studium.kit.edu/events/0xC4DDDB81CD5E48A8ADE2FB2FC14727CB

T Course: Tutorial Engineering Mechanics III [T-MACH-105202]


ECTS Language Recurrence Exam type Version0 Deutsch/Englisch Jedes Wintersemester Studienleistung schriftlich 2

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2161204 Engineering Mechanics III (Tutorial) Übung (Ü) 2 Jimmy Alberto

Aramendiz Fuentes,Harry Clausnizer,Wolfgang Seemann

WS 17/18 3161013 Übung (Ü) 2 Jimmy AlbertoAramendiz Fuentes,Harry Clausnizer,Wolfgang Seemann

Learning Control / ExaminationsAttestations, succesful accomplishment of exercise sheetsConditionsNone


79

https://campus.studium.kit.edu/events/0x8E6562FE04154D97879B4645435CEBE3

https://campus.studium.kit.edu/events/0x6564F19F07044B62815CE1ED013E2AF2

T Course: Tutorial Engineering Mechanics IV [T-MACH-105203]


ECTS Language Recurrence Exam type Version0 Deutsch Jedes Sommersemester Studienleistung schriftlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2162232 Engineering Mechanics IV (Tutorial) Übung (Ü) 2 Jens Burgert, Tim

Leister, WolfgangSeemann

SS 2017 3162013 Übung (Ü) 2 Jens Burgert, TimLeister, WolfgangSeemann

Learning Control / ExaminationsAttestations, succesful accomplishment of exercise sheets


80

https://campus.studium.kit.edu/events/0x2CE6381DFA8E4ACBAA78B1696B7C2E91

https://campus.studium.kit.edu/events/0xC2E508FA21F741069906BC03CD68DD17

T Course: Vehicle Comfort and Acoustics I [T-MACH-105154]

Responsibility: Frank GauterinContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Language Recurrence Exam type Version4 Deutsch Jedes Wintersemester Prüfungsleistung mündlich 1

Events

Term Event-No. Events Type SWS LecturersWS 17/18 2113806 Vehicle Comfort and Acoustics I Vorlesung (V) 2 Frank Gauterin

Learning Control / ExaminationsOral Examination

Duration: 30 up to 40 minutes

Auxiliary means: noneConditionsCan not be combined with lecture T-MACH-102206


81

https://campus.studium.kit.edu/events/0xD8AA042557A44F5F91B6948CCE124232

T Course: Vehicle Comfort and Acoustics II [T-MACH-105155]

Responsibility: Frank GauterinContained in: [M-MACH-103349] MF C: Automotive Engineering

ECTS Language Recurrence Exam type Version4 Deutsch Jedes Sommersemester Prüfungsleistung mündlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 2114825 Vehicle Comfort and Acoustics II Vorlesung (V) 2 Frank Gauterin

Learning Control / ExaminationsOral Examination

Duration: 30 up to 40 minutes

Auxiliary means: noneConditionsCan not be combined with lecture T-MACH-102205


82

https://campus.studium.kit.edu/events/0xA47CAFCC55A949E1B3FE9B19DCCBA3CA

T Course: Virtual Engineering (Specific Topics) [T-MACH-105381]

Responsibility: Jivka OvtcharovaContained in: [M-MACH-103351] MF A: Global Production Management

ECTS Language Recurrence Exam type Version4 Englisch Jedes Sommersemester Prüfungsleistung mündlich 1

Events

Term Event-No. Events Type SWS LecturersSS 2017 3122031 Virtual Engineering (Specific Topics) Vorlesung (V) 2 Mitarbeiter, Jivka

Ovtcharova

Learning Control / Examinationsoral exam, 20 min.Conditionsnone


83

https://campus.studium.kit.edu/events/0x7137B1B62B08481393480735998C922A

T Course: Wave and Quantum Physics [T-PHYS-108322]

Responsibility: Gernot Goll, Bernd PilawaContained in: [M-PHYS-104030] Physics

ECTS Recurrence Exam type Version5 Jedes Sommersemester Prüfungsleistung schriftlich 1

Conditionsnone


84

T Course: Working Methods in Mechanical Engineering [T-MACH-105296]

Responsibility: Barbara DemlContained in: [M-MACH-103322] International Project Management and Soft Skills


Events

Term Event-No. Events Type SWS LecturersSS 2017 2110969 Working Methods in Mechanical Engineer-

ingVorlesung (V) 1 Barbara Deml

SS 2017 2174970 Working Methods in Mechanical Engineer-ing

Vorlesung (V) 1 Barbara Deml

Learning Control / ExaminationsTests within the workshop sessions concerning the topics of the online-lecture as well as active participation during allfour workshop sessions.Conditionsnone


85

https://campus.studium.kit.edu/events/0x7792D142ACBD4586A7DFCA48509D0812

https://campus.studium.kit.edu/events/0xCC3FB7086A134E66BFABB012E8ADB808

Index INDEX

IndexA

Advanced Mathematics (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Advanced Mathematics I (T) . . . . . . . . . . . . . . . . . . . . . . . . . . 33Advanced Mathematics I Prerequisite (T) . . . . . . . . . . . . . . 34Advanced Mathematics II (T) . . . . . . . . . . . . . . . . . . . . . . . . . 35Advanced Mathematics II Prerequisite (T) . . . . . . . . . . . . . 36Advanced Mathematics III (T) . . . . . . . . . . . . . . . . . . . . . . . . 37Advanced Mathematics III Prerequisite (T) . . . . . . . . . . . . 38Automated Production Systems (MEI) (T). . . . . . . . . . . . .39Automotive Engineering I (T) . . . . . . . . . . . . . . . . . . . . . . . . . 40Automotive Engineering II (T) . . . . . . . . . . . . . . . . . . . . . . . . 41

B

Bachelor Thesis (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Bachelor Thesis (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Basics in Measurement and Control Systems (T) . . . . . . . 43Basics of Manufacturing Technology (MEI) (T) . . . . . . . . 44

C

Computer Science (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Computer Science for Engineers (T) . . . . . . . . . . . . . . . . . 45 f.

E

Electrical Engineering (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Electrical Engineering and Electronics (T). . . . . . . . . . . . . .47Electrical Machines (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Engineering Mechanics (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Engineering Mechanics I (T) . . . . . . . . . . . . . . . . . . . . . . . . . . 49Engineering Mechanics II (T) . . . . . . . . . . . . . . . . . . . . . . . . . 50Engineering Mechanics III & IV (T) . . . . . . . . . . . . . . . . . . . 51Excercises in Technical Thermodynamics and Heat Transfer

I (T). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Excercises in Technical Thermodynamics and Heat Transfer

II (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

F

Fluid Mechanics (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Fluid Mechanics (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Fundamentals of Combustion I (T) . . . . . . . . . . . . . . . . . . . . 55Fundamentals of Energy Technology (T) . . . . . . . . . . . . . . . 56

G

Global Logistics (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Global Production Engineering (MEI) (T) . . . . . . . . . . . . . . 58

H

Heat and Mass Transfer (T) . . . . . . . . . . . . . . . . . . . . . . . . . . 59

I

International Project Management and Soft Skills (M) . .31

M

Machine Dynamics (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Machines and Processes (M) . . . . . . . . . . . . . . . . . . . . . . . . . . 23Machines and Processes (T) . . . . . . . . . . . . . . . . . . . . . . . . . . 61Machines and Processes, Prerequisite (T) . . . . . . . . . . . . . . 62Manufacturing Processes (MEI) (M). . . . . . . . . . . . . . . . . . .11Materials Science (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Materials Science I & II (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Materials Science Lab Course (T) . . . . . . . . . . . . . . . . . . . . . 64Measurement and Control Systems (M). . . . . . . . . . . . . . . .20Mechanical Design (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Mechanical Design I & II (T). . . . . . . . . . . . . . . . . . . . . . . . . .65Mechanical Design I, prerequisites (T) . . . . . . . . . . . . . . . . . 66Mechanical Design II, prerequisites (T) . . . . . . . . . . . . . . . . 67Mechanical Design III & IV (T) . . . . . . . . . . . . . . . . . . . . . . . 68Mechanical Design III, Constructing the Team (T) . . . . . 69Mechanical Design IV, Constructing the Team (T) . . . . . 70MF A: Global Production Management (M). . . . . . . . . . . .25MF B: Energy Engineering (M). . . . . . . . . . . . . . . . . . . . . . . .27MF C: Automotive Engineering (M) . . . . . . . . . . . . . . . . . . . 29

O

Orientation Exam (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

P

Physics (M) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Presentation (T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Production Operations Management (M) . . . . . . . . . . . . . . 24Production Operations Management (T). . . . . . . . . . . . . . .72Project and Operations Management (T) . . . . . . . . . . . . . . 73

T

Technical Thermodynamics (M) . . . . . . . . . . . . . . . . . . . . . . . 14Technical Thermodynamics and Heat Transfer I (T) . . . . 75Technical Thermodynamics and Heat Transfer II (T) . . . 76Tutorial Engineering Mechanics I (T) . . . . . . . . . . . . . . . . . . 77Tutorial Engineering Mechanics II (T) . . . . . . . . . . . . . . . . . 78Tutorial Engineering Mechanics III (T) . . . . . . . . . . . . . . . . . 79Tutorial Engineering Mechanics IV (T). . . . . . . . . . . . . . . . .80

V

Vehicle Comfort and Acoustics I (T) . . . . . . . . . . . . . . . . . . . 81Vehicle Comfort and Acoustics II (T) . . . . . . . . . . . . . . . . . . 82Virtual Engineering (Specific Topics) (T) . . . . . . . . . . . . . . 83

W

Wave and Quantum Physics (T) . . . . . . . . . . . . . . . . . . . . . . 84Working Methods in Mechanical Engineering (T) . . . . . . . 85

Module Handbook Mechanical Engineering (International ...€¦ · Module Handbook Mechanical...

Documents

Transcript of Module Handbook Mechanical Engineering (International ...€¦ · Module Handbook Mechanical...