Module 6 - Assembly Design Reseller Training …from the EXPERTS.

Module 6 - Assembly Design

Reseller Training

…from the EXPERTS…from the EXPERTS

Reseller Training

ObjectivesObjectives

Placing PartsPlacing Parts Building RelationshipsBuilding Relationships Rapid Placement (Reduced Input)Rapid Placement (Reduced Input) EdgeBarEdgeBar

Reseller Training

Assembly Environment Assembly Environment

Build AssembliesBuild Assemblies Modify AssembliesModify Assemblies Display Different Views of AssembliesDisplay Different Views of Assemblies Manage AssembliesManage Assemblies Verify AssembliesVerify Assemblies

Reseller Training

Assembly EnvironmentAssembly Environment

Reseller Training

Building AssembliesBuilding Assemblies

Place PartPlace Part-Parts Library Tab on EdgeBar-Locate the folder-Drag and Drop

Reseller Training

Placing Parts into AssembliesPlacing Parts into Assemblies

First Part Placed - grounded First Part Placed - grounded Placing Subsequent Parts - relationshipsPlacing Subsequent Parts - relationships

Reseller Training

Applying RelationshipsApplying Relationships

MateMate Planar AlignPlanar Align Axial AlignAxial Align InsertInsert ConnectConnect AngleAngle TangentTangent Flash FitFlash Fit

Reseller Training


Mate RelationshipMate Relationship-Parallel and Face to Face-Optional offset distance

Reseller Training


Planar AlignPlanar Align-Parallel and facing same direction-Optional offset distance

Reseller Training


Axial AlignAxial Align-Aligns cylindrical axis of two parts-Part may require additional relationships

Reseller Training


Insert RelationshipInsert Relationship-Combines Mate and Align process-Fixed Rotation (system generated)-Can be ‘freed-up’ by floating the axial align

Reseller Training


Connect RelationshipConnect Relationship

Reseller Training


AngleAngle-Between 2 faces or 2 edges-Requires edge for pivot point-Quadrant angle defined on ribbon bar

Reseller Training


TangentTangent-Part faces can be made tangent -Can be touching or offset, NOT a floating offset

Reseller Training


Offset DistanceOffset Distance

Reseller Training


Offset Distance - FloatingOffset Distance - Floating

Reseller Training


Using Reference PlanesUsing Reference Planes

Reseller Training

Rapid Part PlacementRapid Part Placement

Reduced InputReduced Input-Omits the part selection step on matching part-May be cumbersome with numerous parts

Flash FitFlash Fit-Assumes a Mate (plane to plane)-Assumes an Axial Align (cylinder to cylinder)

Capture FitCapture Fit-Stores the relationships of the placement part-Place part by selecting matching surfaces-Efficient for common parts (bolts, brackets, etc.)

Reseller Training


Reduced InputReduced Input-Omits the part selection step on matching part-May be cumbersome with numerous parts

Reseller Training


Flash FitFlash Fit-Placement tools - Plane to plane (Mate)- Cylinder to cylinder (Axial Align)

-Reduces the number of clicks-Take advantage of QuickPick

Reseller Training


Capture FitCapture Fit-Stores the relationships of the placement part-Place part by selecting matching surfaces-Efficient for common parts (bolts, brackets, etc.)

Reseller Training

Path FinderPath Finder

Using the Top PaneUsing the Top Pane-Component Status-Component Selection

See Book – Vol 2, pg. 199

Reseller Training

Path FinderPath Finder

Using the Bottom PaneUsing the Bottom Pane-Relationship Management- Viewing, Deleting, Suppressing- Highlights Conflicting Relationships- Modifying Relationships.

Reseller Training

ActivitiesActivities

Assembly Manual – Page 19Assembly Manual – Page 19-Placing parts

Assembly Manual – Page 73Assembly Manual – Page 73-Reduced input

Module 6 - Assembly Design Reseller Training …from the EXPERTS.

Documents

Transcript of Module 6 - Assembly Design Reseller Training …from the EXPERTS.