675918 675926

Modular Winder SystemWatch WinderSTORAGE, DISPLAY AND WINDING DEVICE

1

TABLE OF CONTENTS

Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Why Modular Winder System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setting up the Watch Winder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Daily Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

2

WHY MODULAR WINDER SYSTEM

A watch winder is a mechanical device that keeps your automatic watch operating smoothly. It’s able to simulate the natural motion for people who don’t wear their watches everyday.

Despite how many automatic watches that you own, you need to have a watch winder that looks after your timepiece.

Benefits of a modular watch winder system:• Add winders as your collection grows.• Just one power wire (clutter free).• If one winder fails it may be replaced individually.

3

LOCATION OF CONTROLS1. Front Panel

2. Watch Cushion and Mount

3. TPD (Turns Per Day) Switch

4. Direction Switch ( / / )

5. Main Power Switch-On/Off

6. LED Light

7. Plastic Cap (4)

8. Concave Connector (4)

9. Winder Housing

10. Clear Cover

11. Power Plug

12. Raised Connector (4)

13. EVA Insulator (4)

1

2

5

6

34

7

8

910

11

12

13 16

15 4

SETTING UP THE WATCH WINDER • First things first: We would like to thank you for making the MODULAR

WATCH WINDER your choice for your precious automatic watch.

• Introduction: MODULAR WATCH WINDER is a mechanical device designed for winding, displaying and storing an automatic watch.

• When stacking additional winder modules, you will need to remove the 4 plastic caps on the top surface. Use a small point object, such as a paper clip to remove each cap.

145

The Modular Watch Winder is easy to operate:

Plug the AC/DC adaptor into the connection on the rear side of the unit and into an electrical outlet.

The rocker switch controls the power and is located on the bottom-right corner on the front panel:

Note: During the normal operation, the LED light will be Green in color.

The DIRECTION SWITCH provides 3 winding modes:

Note: When Automatic Bidirectional mode is selected, the Motor will rotate Clockwise and Counterclockwise. For example: If you selected TPD setting on I (672 Turns Per Day), Motor will rotate Clockwise 336 times and Counterclockwise 336 times.

I On(Green LED light on)O Off (No LED light)

Clockwise

Automatic Bidirectional

Counterclockwise

6

3 TPD (TURNS PER DAY) SETTINGS: 672 (TPD): Motor will rotate 28 times each hour when you select this TPD setting. Watch will rotate 28 times continuously when you first turn on the winder. After that, it will stop and wait for approximately an hour and then rotate 28 times continuously and repeat.

960 (TPD): Motor will turn 40 times each hour when you select this TPD setting. Watch will rotate 40 times continuously when you first turn on the winder. After that, it will stop and wait for approximately an hour and then rotate 40 times continuously and repeat.

1,248 (TPD): Motor will turn 52 times each hour when you select this TPD setting. Watch will rotate 52 times continuously when you first turn on the winder. After that, it will stop and wait for approximately an hour and then rotate 52 times continuously and repeat.

I

II

III

13

Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit’s power supply cord or plug is damaged, do not attempt to fix it yourself.

To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when unit is used.

Do not operate in the presence of explosive and/or flammable fumes.

11.

12.

13.

7

DAILY OPERATION1. Take the high-impact resistant clear cover off (slightly turning counterclockwise) and remove the soft WATCH CUSHION from the WATCH MOUNT (turning mechanism).

2. Fasten the watch taking care to place the watch band across the straight/flat edge and put the WATCH CUSHION back into the WATCH MOUNT. Please pay attention when placing the watch band across the WATCH CUSHION, the watch band should be tightly secured to prevent it from interfering with the turning mechanism:

3. On the bottom left corner, you will find the TPD Switch and the Direction Switch. Please select the most appropriate TPD settings ( I / II / III ) and choose the desired directions ( / / ).Find the Power Switch ( I / O) on the bottom right corner on the front, to turn the Power on( I ).

Note: Do not insert or remove the WATCH CUSHION while the winder is turning.

12

WARNINGClose supervision is necessary when this unit is used by or near children.

Use this unit only for its intended use as described in this manual.

Unplug this unit during lightning storms or when unused for long periods of time.

Never drop or insert an object into any opening.

Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit.

Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit when storing.

The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat.

Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked.

Do not overload electrical outlet. Use only the power source as indicated.

Do not carry this unit by cord or use cord as handle.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

8

THE UNIQUE PATENTED FEATUREOur MODULAR WATCH WINDER has a patented Light Sensor inside the mechanism, the motor is counted by turns and it always performs the rotation precisely and returns to the original position, unlike some other winders are counted by time.

The most UNIQUE feature of this MODULAR WATCH WINDER is that when you purchase additional watches you may add modular winders to your base.

Note: Only 1 AC/DC Adaptor is required, each unit is designed to combine with another unit. The current will be conducted by the connectors.

We strongly recommend that you do not stack more than 3 winders together for stability and weight loading reasons.

11

DANGERTo reduce the risk of electric shock, burns, fire or injury:

Always unplug the unit from the electrical outlet immediately after using.

Do not use while bathing or in a shower.

Do not place or store unit where it can fall or be pulled into a tub or sink.

Do not place in or drop into water or other liquid.

Do not reach for unit that has fallen into water. Unplug it immediately.

Care should be taken so that objects do not fall and liquids are not spilled onto the unit.

•

•

•

•

•

•

9 10

Examples of how you may stack up the modular units:

Note: POWER EXTEDED STATION provides current connections horizontally and then vertically.

CARE AND MAINTENANCEWipe with a soft, dry cloth. Do not use abrasive cleaning agents.

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONSAll the safety and operating instructions should be read, adhered to and followed before the unit is operated.

•

•