MODULAR MANIFOLD VALVES

J U LY 2001

MODULAR MANIFOLD VALVES

Tate Andale ModularManifold ValvesTate manifold valves are of modularconstruction, saving time and money atboth the design and installation stages.You get the advantages of design anddimension standards for both simplexand duplex manifold valve arrange-ments, cross valves and angle valves.Unless otherwise specified, dimensionsand details of valve service in this mod-ular valve section are for Tate Andalestandard modular valves.

Advanta ges• Low pressure drop• Simplified layout of piping systems• Stop and/or stop check valve service• Minimum possibility of errors• Reduced manufacturing costs• Pattern costs eliminated• Variety of body and trim materials• Shorter manufacturing lead time• Welded or flanged construction• Dimensionally compact• Unlimited range of sizes, connections

and arrangements

Tate Andale modular simplex valve arrangementof compact welded construction

Pow er OperatedManifold ValvesP n e u m a t i cH y d r a u l i cE l e c t r i cThe application ofpower to automateTate Andale modularvalves can be accom-plished with varioustypes of operationspowered by pneu-matic, hydraulic orelectrical means.Power extends theefficiency of plantand line controlmany fold resulting in• Less man hours• Faster operation• Central panel

board control• Improved plant

s a f e t y

Duplex modularmanifold valves

Simplex fabricated &modular manifold valves

Standard cross& angle valves

J U LY 2001

MODULAR MANIFOLD VALVES

Standard materials for the welded man-ifold assembly are cast steel, stainlesssteel, and bronze. The approximateweights shown above for the manifold

body are in steel, and include thebutt weld pump connections andflanged tank connection. For bronzeadd 10% to the total weight.

Tate Andale modular valves with stan-dard dimensions are combined to makemanifold and cross valves to your speci-fications. All Tate Andale modularvalves have lower pressure drop thancommercial valves.

VALVE SIZE 1 1/2:1, LIFT2 " 1 -3 / 4 "2 - 1 / 2 " 1 - 1 / 8 "3 " 1 - 1 / 8 "4 " 1 - 1 / 2 "5 " 1 - 7 / 8 "6 " 2 - 1 / 4 "8 " 3 "

1 0 " 3 - 3 / 4 "

S i m p l e x P a r t Descriptions:

Simplex Modular Valve Units

DIMENSIONS–Inches (Subject to change without notice.) Other sizes available upon request.

For flanged or welded connections between manifold unit bodies add the following weights:

Size, inches 11⁄2 2 21⁄2 3 31⁄2 4 5 6 8 1 0 1 2 1 4 1 6 1 8

FLANGE, pounds 4 5 7 8 1 1 1 5 1 9 2 4 3 9 5 2 8 0 1 1 0 1 4 0 1 5 0

WELD, pounds 2 3 4 4 5 5 6 7 9 1 2 1 4 1 6 1 8 2 0

1. Simplex Body2. Bonnet3. Stop Disc4. Packing Gland5. Stop Valve

S t e m6. Insert Seat7. Gland Stud and

N u t

18. Stem Nut19. Stem Washer10. Bonnet Studs

and Nuts11. Packing12. Bonnet Gasket13. Handwheel14. Disc Nut

C e n t e rTo CenterD i m e n s i o n sP or Q dimen-sions for differ-ent size valvesare added todetermine adja-cent center tocenter tank con-nection spacing.

Typical Flanged Manifold Assembly

Typical Welded Manifold Assembly

2 P2 P2 PP

R R R P

J U LY 2001

MODULAR MANIFOLD VALVES

1941 Lansdowne Road, Baltimore, MD 21227-1789(410) 247-8700 • Fax: (410) 247-9672

w w w . t a t e a n d a l e . c o m

Tate Andale modular valves with stan-dard dimensions are combined to makemanifold and cross valves to your spec-ifications. All Tate Andale modularvalves have lower pressure drop thancommercial valves.

VALVE SIZE 1 1/2:1, LIFT2 " 1 -3 / 4 "2 - 1 / 2 " 1 - 1 / 8 "3 " 1 - 1 / 8 "4 " 1 - 1 / 2 "5 " 1 - 7 / 8 "6 " 2 - 1 / 4 "8 " 3 "

1 0 " 3 - 3 / 4 "

D u p l e x P a r t Descriptions:

Duplex Modular Valve Units

DIMENSIONS–Inches (Subject to change without notice.) Other sizes available upon request.

For flanged or welded connections between manifold unit bodies add the following weights:

Size, inches 11⁄4 11⁄2 2 21⁄2 3 4 5 6 8 1 0 1 2 1 4 1 6 1 8

FLANGE, pounds 3 4 5 7 8 1 5 1 9 2 4 3 9 5 2 8 0 1 1 0 1 4 0 1 5 0

WELD, pounds 1 2 3 4 4 5 6 7 9 1 2 1 4 1 6 1 8 2 0

Standard materials for the welded manifold assembly are caststeel, stainless steel, and bronze. The approximate weightsshown above for the manifold body are in steel and include thebutt weld pump connectionsand flanged tank connection.For bronze add 10% to thetotal weight.

1. Duplex Body2. Bonnet3. Stop Check

D i s c4. Packing Gland5. Stop Check

Valve Stem6. Insert Seat

17. Gland Studand Nut

18. Stem Nut19. Stem Washer10. Bonnet Studs

and Nuts11. Packing12. Bonnet Gasket13. Handwheel

C e n t e rTo CenterD i m e n s i o n sR, S or U dimensions for differentsize valves are added to deter-mine adjacent center to centertank connection spacing.

Typical Welded Manifold Assembly

Pump Connections Up To 2"W X Y

5/8-11 N.C. 1 - 1 / 4 2 - 1 / 8

Pump Connections Over 2"W X Y

3/4-10 N.C. 1 - 1 / 2 2 - 3 / 4

R 2 R 2 R

Typical Flanged Manifold Assembly

R 2 R 2 R

U