Modul 04 - Wtp 104 Technical and Building Drawing

7/25/2019 Modul 04 - Wtp 104 Technical and Building Drawing

1/8

December Edi tion 2013

MINISTRY OF EDUCATION, MALAYSIA

VOCATIONAL COLLEGE STANDARD CURRICULUM

COURSE NAME INFORMATION

COURSE NAME : TECHNICAL AND BUILDING DRAWING

CODE NAME : WTP 104

LEVEL : 1 SEMESTER 1

CREDIT UNIT : 2.0

CONTACT HOUR : FACE TO FACE : 4.0 HOURS/WEEK

NON FACE TO FACE :

COURSE TYPE : VOCATIONAL

PREREUISITE : !

CORE REUISITE : !

Last Edited 10-13 November 2013

Module Page 1/7 Document Page 1


2/8


COURSE OUTCOMES:

At the end of the course, students should be able to:-

1 Carry out basic technical drawing2 identify types of drawings in building construction3 Pproduce various symbols in technical drawings and building plan Produce building plan for single storey building! interpret single storey building plan

COURSE DESCRIPTION

"his course is designed for students to master basic technical drawing by using appropriate drawing instruments which is according

to the building drawing standard# $t is also designed to enable them to draw and interpret the single storey building plan




3/8


CONTENT AND LEARNING STANDARDS

PROGRAMME : CONSTRUCTION TECHNOLOGY


CODE NAME : WTP 104

CONTENT STANDARD LEARNING STANDARD PERFORMANCE CRITERIA

1. CARRY OUT BASICTECHNICAL DRAWING

1#1 %et a drawing paper on drawingboard

1#1#1 %elect types and si&e of drawing paper for technicaldrawing according to specification

1#1#2 %etting the drawing paper on the drawing board byusing clips

1#2 $dentify appropriate drawing$nstruments

1#2#1 %elect appropriate drawing instruments according tospecification#

1#2#2 'raw the types of lines in drawing by using the drawinginstrument set

1#2#3 Apply the various techni(ues of letter writing by usingletter bloc) and free hand

1#3 Perform basic technical drawing 1#3#1 'raw basic technical drawing by using an instrument setas shown in the drawing sheet#




4/8





CODE NAME : WTP 104


2. IDENTIFY TYPES OF

DRAWINGS INBUILDING

CONSTRUCTION

3.1*ecogni&e various types of drawing inbuilding construction

2#1#1 %elect the various types of drawing inbuilding construction according to +obspecification

2#2 erify type of drawing used in buildingconstruction

2#2#1 ist the drawings used in building accordingto +ob specification#




5/8





CODE NAME : WTP 104


". PPRODUCE VARIOUSSYMBOLS IN

TECHNICAL

DRAWINGS AND

BUILDING PLAN

3#1 Apply standard symbols used in

related drawing

3#1#1 $dentify the symbols in technical drawings and building

plan according to drawing re(uirement3#1#2 'raw the types of symbols in technical drawing and

building plan using drawing instrument set

3.2 Apply standard drawing scale

used in drawing

3#2#1 $dentify drawing scale used in technical drawings and

building plan according to drawing re(uirement

3#2#2 .se the drawing scale in technical drawing according to

drawing re(uirement

3#2#3 .se the architectural scale in drawing plan

according to drawing re(uirement


Module Page /7 Document Page


6/8





CODE NAME : WTP 104


4. PRODUCE BUILDING

PLAN FOR

SINGLE STOREY

BUILDING

#1 $nterpret building plan for single storey building

#1#1 /utline the specification and information fromthe drawing given

#2 'raw floor plan and scale #2#1# %et the drawing paper on the board using the paper clip#2#2 $dentify the orthography drawing building plan

according to drawing given#2#3 Perform drawing for floor plan and scale

according to drawing given

4.3 'raw front elevation, side

elevation and rear elevation

#3#1 $dentify front elevation, side and rear elevation

and scale according to drawing given#3#2 Perform drawing for front elevation, side and

rear elevation and scale according to drawinggiven

4.4 'raw roof plan ##1 %elect roof plan and scale according to drawingspecification

##2 Perform drawing for roof plan and scaleaccording to drawing specification


Module Page !/7 Document Page !


7/8


4.5 'raw section view #!#1 $dentify section view and scale according todrawing given

#!#2 Perform drawing for section view with scaleaccording to drawing given




8/8





CODE NAME : WTP 104


#. INTERPRET SINGLE

STOREY BUILDING PLAN

!#1 $dentify the building drawing

!#1#1 'etermine the types, shapes and si&es of materialdrawing according to drawing plan

!#1#2 'etermine the types of finishing and theirapplications according to drawing plan

!#2 $dentify related drawing !#2#1 'etermine related drawing according to singlestorey building plan#

!#2#2 /utline all specification and information from thesingle storey building plan


Module Page "/7 Document Page "

Modul 04 - Wtp 104 Technical and Building Drawing

Documents

Transcript of Modul 04 - Wtp 104 Technical and Building Drawing