MODERN LIFE - Kohler Co.resources.kohler.com/plumbing/kohlerapac/pdf/77138T...-6-d. Drill holes on...
Transcript of MODERN LIFE - Kohler Co.resources.kohler.com/plumbing/kohlerapac/pdf/77138T...-6-d. Drill holes on...
-1-
BEFORE YOU BEGINBEFORE YOU BEGIN
MODERN LIFEINSTALLATION INSTRUCTIONS
CABINET
K-77137T-M/K-77138T-M/K-77139T-M
�
�
�
�
�
�
�
�
Please read these instructions carefully to familiarizeyourself with the required tools, materials, and installationsequences. Follow the sections that pertain to yourparticular installation. This will help you avoid costlymistakes. In addition to proper installation, read alloperating and safety instructions.All information in these instructions is based upon thelatest product information available at the time ofpublication. Kohler China. reserves the right to makechanges in product characteristics, packaging, oravailability at any time without notice.These instructions contain important care, cleaning, andwarranty information-
Turn off the water supply.The pluming installation must comply with Water SupplyRegulations/Bye-laws, Building Regulations or anyparticular regulations and practices, specified by the localwater company or water undertakers. The installationshould be carried out by a plumber.Before installation carefully inspect the new fixture for anysigns of damage.This product complies with GB 24977-2010.
please leave instructions for the
consumer.MODERN LIFE cabinet adopts E1 grade wood-basedpanel of high quality, and with further processing, itsharmful emissions will be less than 1.5mg/L.
�
�
�
�
�
�
�
�
-
E11.5mg/L
GB 24977-2010
ORDERING INFORMATION
This installation covers the following products in the
MODERN LIFE range:
MODERN LIFE 1200mm Cabinet ..................K-77137T-M
MODERN LIFE 900mm Cabinet ....................K-77138T-M
MODERN LIFE 600mm Cabinet ....................K-77139T-M
1200mm .......................................K-77137T-M
900mm .........................................K-77138T-M
600mm .........................................K-77139T-M
SAFETY WARNINGS
Kohler products are precision-engineered and should givecontinued superior and safe performance, provided:
1. They are installed, commissioned, operated andmaintained in accordance with the recommendations givenin this Manual.
2. Periodic attention is given, as necessary, to maintain theproduct in good functional order. Recommendedguidelines are given in the section.
Carefully inspect the new fixture for any signs of damage.
When installing Kohler Products, manufacturers guidelines forpower tool safety should be followed.
MAINTENANCE
1.
2.
KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD,JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436
( ) 158 200436
©
©
Copyright Kohler China Investment Co., Ltd. 2019
20191412471-T01-A
Fig.22
ROUGHING-IN
INSTALLATION
-2-
UNIT : mm
A. Before Installation
Before cabinet installation, please reserve 0.5m, 220V power
line on the wall for background light connection (see Fig.2).
A.
0.5m 220V
( 2)
Fig.11
UNIT : mm
Kohler reserves the right to change marked dimensions without prior notice.
Reference
470 568
500
462
904
500
462
1204
500
K-77137T-MMODERN LIFE 1200mm
1200mmCabinet
K-77138T-MMODERN LIFE 900mm
900mmCabinet
K-77139T-MMODERN LIFE 600mm Cabinet
600mm
Area for installing the cabinet
Reserve the 220V line
220V
1412471-T01-A
-3-
B. Install Washbasin Cabinet
Install the services.Hot (H) and Cold (C) inlets must be connected to the correctinlet pipes.Install the drain in accordance with the manufacturer'sinstructions.We suggest using P-trap drain. Connect P-trap pipe withwashbasin drain.
Make sure a watertight seal exisits on allwashbasin drain connections.
Provide access to the plumbing connectionsfor future plumbing maintenance.
The hot and cold water supplies must be installed withisolating valves.
Caution!
Caution!
B.
(H) (C)
P
1.1. Mark the position of hanged bracket and wall boltaccording to dimensions as illustrated, and loosen thesuspension hook of washbasin cabinet.
Avoid the cables and pipes inner set whendrilling in the wall.
Different types of bolts are required for differentdecoration boards. Please apply suitable bolts and plugs.
Caution!
Note:
UNIT : mm
Fig.44
CenterCabinet WallBolt Holes
CabinetOutline
Wall Bracket
500
270
603
82820
568
**
CenterCabinet WallBolt Holes
Cabinet Outline
Wall Bracket
500
300
583
830
904
20
* *
*Refer to Vanity Wall Bolt Holes
*
Fig.33
**Refer to the following pictures for the wall installation
positions of the faucet inlet angle valve and the floor drain
hole.
K-77139T-M
K-77139T-M
K-77138T-M
K-77138T-M
CenterCenterCenter
Inlet Angle Valve Set AreaInlet Angle Valve Set AreaInlet Angle Valve Set Area
CabinetOutline
CabinetOutline
CabinetOutline
FloorFloorFloor
Wall
Wall
Wall
1204904568
505050 552
552
552
552
505050
500
500
500
500
500
500
380
380
380
300
300
270
Ground Drain Hole Set AreaGround Drain Hole Set AreaGround Drain Hole Set Area150150
150
402 402234
234
234
234
K-77137T-M
402 402
1412471-T01-A
Fig.44
2.
3.
65-75mm
2. Drill holes for fixing the bracket and bolt. Using a level toensure that the hanged bracket is level.
3. Use suitable plugs and bolts, and fix the bracket and bolton the wall. Fix the bolts supplied with the vanity on thewall. Each bolt shall be 65-75mm out of the wall.
4.
5. 1200mm 4
4. Install adjustable feet first if needed.
MODERN LIFE 1200mm cabinet is equipped with middlesupport foot. Fix the foot onto wall as shown in Fig.4. (Besure to use the metal expansion screw supplied.)
5.
Fig.55
-4-
Cabinet Outline
Vanity Wall bolt Holes
Center
Cabinet Wall bolt Holes
Wall bracket
L-shaped BracketL
L-shaped bracket must be fixed with thescrew on the bottom shelf.L-shaped bracket must be fixed on the wall
(Refer to installation instructions of the bracket)L
500
300
20
200 200 200 200
1204
538
830
399430
360
K-77137T-M
1412471-T01-A
-5-
6.
7.
a.
b. 2
6. Fix faucet and drain according to their installation
instructions.
7. Fix onto wall.a. Lift the cabinet and vanity by two people. Align the vanity
hanging hole with the bolts on the wall. Make the boltsthrough the vanity hanging hole.
b. Hang the two back wall clips onto the pre-fixed bracket onthe wall.
Fig.66
Vanity Wall Bolt Holes
Wall Bracket
First
Second
c.c. Adjust the cabinet and vanity level. Put the cabinet against
the wall by adjusting the screws of wall clips.
MAX1
2 431
Fig.77
1412471-T01-A
-6-
d.d. Drill holes on the wall according to the holes on the cabinet
back board, insert expanding dowels and then fix cabinet
onto wall with screws supplied.
88 Hole
Fig.88
8. Connect water pipe and drain by professionals to ensure
there is no leakage.
Note:
Note:
Different types of bolts are required for different
decoration boards. Please apply suitable bolts and plugs.
9. Adjust the screw with the wrench supplied to lift the support
foot and make sure it is firmly attached to the cabinet bottom.
The support foot is the important part that must be
installed to prevent the cabinet from descending. It must be
firmly attached to the cabinet bottom (use the wrench until the
screw is completely tightened.)
8.
9.
( )
e.e. Open the cabinet door and the drawer. Fix the bolt
according the vanity installation instructions. Before that ,
please apply silicone sealant onto the contact surface of
the vanity and the wall.
WasherNut
Offset Nut
Fig.99
1412471-T01-A
Fig.1010
a. (P )
/ U
Connect Drainage
a. Inwall drainage (P-Trap)
Please install the drain assembly and faucet as shown.
Please set the water supply and drainage position
according to the suppliers instructions. You can put the
pipe into the U Notch.
Faucet
Supply Lines
Shut-off Valve
Drain Assembly
-7-
b. S
U
b. Floor drainage (S-Trap)
Please install the drain assembly and faucet as shown.
Please set the water supply and drainage position
according to the suppliers instructions. You can put the
pipe into the U Notch.
Faucet
Supply Lines
Shut-off Valve
Drain Assembly
Ripple Pipe
Outlet
Fig.1111
1412471-T01-A
-8-
Fig.1212
10.
a.
b.
10. Ajust the cabinet.
a. Place the hinge cover and plastic cover(in the hardware
pack).
b. Adjust the hinge of door in 3 direction to make sure the
door level.
1.
2.
3.
4.
5.
6.
7.
USER MAINTENANCEUSER MAINTENANCE
Warning! Risk of product damage.
1.
2.
3.
4.
5.
6. Please do not sit, lean or step on the basin cabinet.
7. If any fixtures caused by abnormal reasons, Kohler Chinacan supply paid replacement for service parts caused byabnormal reasons as shown in the Service Parts Page inthe limited duration of warranty.
Many cleansers contain abrasive and chemical substancewhich is not suitable for cleaning stainless steel, enamel,plating or plastic products. You may use mild cleansers orsoaps to clean the surfaces. Wipe any splashes of cleanersolutions from the surface with clean soft cloth.
Maintain ventilation in the bathroom, and separate the dryarea from the damp one if conditions permit. Try to openthe door and windows of the bathroom and maintain goodventilation.
Kohler bathroom cabinet are dealt with strict proceduresfor damp-proof, whose good damp-proof function ensuresgood performance even in bathroom of huge humidity. Yetdo not splash and pour water directly on the bathroomcabinet. Make sure that the bathroom is not over dampand wipe any splashes from surfaces immediately.
Maintenance of door board: Clean and wipe door boardregularly, and wipe the condensation vapor with dry andsoft cloth.
Ensure that electrical connections for appliances such ashead lamp is insulated wipe mirror surface with chamoisregularly to guarantee the persistent excellent performance.
1412471-T01-A