Modelling and Simulation 10. April 2023 / Dr. –Ing Naveed Ramzan

1

10. April 2023 / Dr. –Ing Naveed Ramzan

1

Instrumentation and control

Department of Chemical Engineering, U.E.T. Lahore PakistanDepartment of Chemical Engineering, U.E.T. Lahore Pakistan

Dr. –Ing. Naveed Ramzan

Case Studies

Case Study: Flow measurement of gas with changing composition

Case Study: Flow measurement of gas with changing composition

Case Study: Effect of pressure on gas flow sensor

Case Study: Effect of pressure on gas flow sensor

Case Study: Pressure drop in measuring gas flow

Case Study: Pressure drop in measuring gas flow

Case Study: Measuring high variable flow rate

Case Study: Measuring high variable flow rate

Case Study: Flashing flow

Case Study: Flashing flow

Instruments are our eyes Fundamentals of Electrical Technology and digital logic employed in the measurement Review of Scientific principles employed in instruments Parts of Instrument Performance Characteristics of Instruments Selection and Calibration of Instruments Instruments Identification and Line Symbols Principle measurements desired in industry (a) Temperature (b) Pressure, Load (c) Level (d) Flow (e) Others ( Weight, Composition, pH etc.) (f) Transducers Installation and Installation Costs Case Studies

Course Outline

Modelling and Simulation 10. April 2023 / Dr. –Ing Naveed Ramzan

13

10. April 2023 / Dr. –Ing Naveed Ramzan

13