UFM Compact Ultrasonic Flowmeter

Installation

The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific,

written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.

Suitable Applications

Use with Water OnlyFully Developed Flow

Minimal Air in PipeMinimal Sludge in Pipe

Suitable Pipe Run Available

Installation Location

Install UFM at 45° angle Avoids Interference with Air and Sludge

Installation Location

Ensure Suitable Location on Pipe20 Pipe Diameters Upstream & 10 Downstream

Set-Up

Enter Password: 71360

Enter Pipe ID

Enter Pipe Material

Obtain Separation Code

Sensor Separation

Device Displays Sensor Location Code (e.g. A2)

Position Sensors According to Code

PASSWORD:71360

Attach to PipeApply Silicon Grease to Sensors

Attached to Pipe

Snap on Top Assembly

Connect Sensor Wiring

PASSWORD:71360

The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only.  They may not be reproduced, published, or transmitted electronically for commercial purposes.  Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.   ©Copyright 2014 Dwyer Instruments, Inc.