PRESSURE VS TEMPERATURE PACKING RATING COLOR CODED OPTIONS

PTFE

6K / 10K PSI

GRAPHOIL

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

www.ite-srl.comDWG NAME: NEEDLE.dft - REV.: - DATE: 16/04/2018 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Standard Valve - Pressure rating up to 10,000 psig

STANDARD VALVE

MODEL:

NEEDLE

LIST OF MATERIAL

POS DESCRIPTION AISI 316L A105 LF2 F51 F55 ALLOY 400 ALLOY C276 ALLOY A625 6MO

1 BODY BONNET M18x1 AISI 316L A105 A350 LF2 F51 F55 A400 C276 A625 6MO

2 GLAND PACKING PTFE - - - - - - - -

3 GRAPHOIL THRUST BUSH AISI 316L - - - - - - - -

4 NEEDLE AISI 316L AISI 316L AISI 316L F51 F55 A400 C276 A625 6MO

5 STEM AISI 316L - - - - - - - -

6 GLAND PACKING ADJUSTER AISI 303 - - - - - - - -

7 GLAND ADJUSTER LOCK NUT AISI 303 - - - - - - - -

8 DUST CUP HYTREL BLU - - - - - - - -

9 T HANDLE 50mm AISI 303 - - - - - - - -

10 PIN 4X12 - ISO 8741 A2 - - - - - - - -

11 NO HEAD SCREW M6x10 - 45H - DIN 915 A2 - - - - - - - -

9

8

6

7

11

10

5

1

3

2

4

Equalise

Vent/test

Isolate

Locking Plate Anti-Tamper Head Anti-Tamper Headwith padlock

FEATURES

1 Metal to Metal Seal to Valve Body.

2Adjustable packing installed below operating threads to preventmedium contamination or lubrificant washout of operatingthreads.

3 Metal to Metal secondary needle seal.

4Non-rotating lower stem for smooth operation and minimumwear of sealing elements. The lower stem is antiblow-out/non-removable for your safety.

5Stem with cold rolled threads for high strength and smoothoperation. Stem incorporated back stop design.

6 Gland packing adjuster with easy acces.

7 Gland adjuster lock nut for vibration protection.

8Close dust cup for operating thread protection and providingcolour coded functional identification

9Operating handle for low torque function. Operating options areAnti-Tamper or lcoking device features. Standard lenght forapplication up to 6.000 psi are 50mm.

10 Eliminates unauthorized removal of the bonnet.

www.ite-srl.comDWG NAME: LADM91.001T.dft - REV.: - DATE: 28/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock distribution manifold. The rows of thevalves being offset by 45° degrees to each other.

DISTRIBUTION MANIFOLD

MODEL:

M91

Packing material PTFE as standard max temperature 180 °C.

The dimensions shown apply only to the illustrated valve – if you need thedimensions for your individual type or should you still not find your options at all

please contact the factory.

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

M91 6K psi

AISI 316L

PTFE 1/2" NPT-F x2 1/4" NPT-F x4

M91-06STA8N4N

3,4 Kg

ASTM A105 M91-06ATA8N4N

F51 M91-06DTA8N4N

F55 M91-06ETA8N4N

ALLOY 400 M91-06FTA8N4N

C276 M91-06GTA8N4N

6MO M91-06HTA8N4N

I625 M91-06ITA8N4N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

30 30 3040 40

150

170

IN INOUT

19

110

19

40

50q

85

2x M8

45°

15

www.ite-srl.comDWG NAME: LADM91.002T.dft - REV.: - DATE: 28/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock distribution manifold. The rows of thevalves being offset by 45° degrees to each other.

DISTRIBUTION MANIFOLD

MODEL:

M91

Packing material PTFE as standard max temperature 180 °C.

The dimensions shown apply only to the illustrated valve – if you need thedimensions for your individual type or should you still not find your options at all

please contact the factory.

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

M91 6K psi

AISI 316L

PTFE 1/2" NPT-F x2 1/4" NPT-F x6

M91-06STB8N4N

4,6 Kg

ASTM A105 M91-06ATB8N4N

F51 M91-06DTB8N4N

F55 M91-06ETB8N4N

ALLOY 400 M91-06FTB8N4N

C276 M91-06GTB8N4N

6MO M91-06HTB8N4N

I625 M91-06ITB8N4N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

30 30 3040

210

230

IN INOUT

19

110

19

40

50q

85

2x M8

45°

30 30 40

15

www.ite-srl.comDWG NAME: LADM91.003T.dft - REV.: - DATE: 28/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock distribution manifold. The rows of thevalves being offset by 45° degrees to each other.

DISTRIBUTION MANIFOLD

MODEL:

M91

Packing material PTFE as standard max temperature 180 °C.

The dimensions shown apply only to the illustrated valve – if you need thedimensions for your individual type or should you still not find your options at all

please contact the factory.

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

M91 6K psi

AISI 316L

PTFE 1/2" NPT-F x2 1/4" NPT-F x8

M91-06STC8N4N

5,9 Kg

ASTM A105 M91-06ATC8N4N

F51 M91-06DTC8N4N

F55 M91-06ETC8N4N

ALLOY 400 M91-06FTC8N4N

C276 M91-06GTC8N4N

6MO M91-06HTC8N4N

I625 M91-06ITC8N4N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

30 30 3040

270

290

IN INOUT

19

110

19

40

50q

85

2x M8

45°

30 30 30 30 40

15

www.ite-srl.comDWG NAME: LADM91.004T.dft - REV.: - DATE: 28/06/2017 - I .T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES W ITHOUT NOTICE.

Bar stock distribution manifold. The rows of thevalves being offset by 45° degrees to each other.

DISTRIBUTION MANIFOLD

MODEL:

M91

Packing material PTFE as standard max temperature 180 °C.

The dimensions shown apply only to the illustrated valve – if you need thedimensions for your individual type or should you still not find your options at all

please contact the factory.

MODEL SELECTION

MODEL MATERIAL PACKING IN OUT CODE WEIGHT NOTE

M91 6K psi

AISI 316L

PTFE 1/2" NPT-F x2 1/4" NPT-F x12

M91-06STD8N4N

8,4 Kg

ASTM A105 M91-06ATD8N4N

F51 M91-06DTD8N4N

F55 M91-06ETD8N4N

ALLOY 400 M91-06FTD8N4N

C276 M91-06GTD8N4N

6MO M91-06HTD8N4N

I625 M91-06ITD8N4N

I.T.E. s.r.l. COMMITS ITSELF TO CONSTANTLY IMPROVE ITS PRODUCTS AND THEREFORE IT RESERVES THE RIGHT TO MODIFY DATA, FEATURES WITHOUT NOTICE.

30 30 3040

390

410

IN INOUT

19

110

19

40

50q

85

2x M8

45°

30 30 30 30 30 30 30 30 4015

DISTRIBUTION MANIFOLD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

EX.: M 9 1 - 0 6 S T B 1 2 N 8 N

M91 BAR STOCK DISTRIBUTION MANIFOLD. ROWS VLV 45°

06 Serie 600010 Serie 10000

S Aisi 316LA A105D F51E F55F Monel 400G C276 HastelloyH 6 Mo/F44I Inconel 625

T TeflonG Graphoil

A 4B 6C 8D 10E 12F 14G 20H 18I 20

4 1/4"6 3/8"8 1/2"

12 3/4"

N NPTI BSPP GAS (ISO 1179)K BSPT R/RC (ISO 7)S Socket Weld

4 1/4"6 3/8"8 1/2"

12 3/4"THREAD (Same as "IN" standard)

N NPTR BSPP GAS (EN 837-1) - Gauge connectionI BSPP GAS (ISO 1179)K BSPT R/RC (ISO 7)S Socket Weld

OPTIONS/

B All component 316LC Special TestingD Custom markingE T-Bar 316LL Lox cleaningTI Isolate Anti-tamperK Padlock for all anti tamper bonnetT Mounted plug drain

KT Padlock for all T-bar bonnet

THREAD

OUT (Same as "IN" standard)

MODEL

RATING

MATERIAL

PACKING

NR. OUT

IN