Mobiltemp SHC 100 Special and 460 Special

Mobiltemp SHC Special Series Product Data Sheet

Mobiltemp SHC Special SeriesSuper Premium Synthetic High Temperature Greases

Product Description

Mobiltemp SHC Special Series are super premium, high temperature, extreme pressure greases which combine the unique features of synthetic base fluids with an organo-clay (non-soap) thickener. The wax-free nature of the synthetic fluids, together with their low coefficient of traction compared with mineral oils, provide excellent low temperature lubrication, oxidation stability at high temperatures plus the potential for energy savings through reduced friction and lower torque. The clay thickener has excellent structural stability at very high temperatures. Mobiltemp SHC Special Series contain molybdenum disulfide for added wear protection under sliding conditions.

Mobiltemp SHC Special Series do not contain lead, chlorine or nitrites.

Benefits

Mobiltemp SHC Special Series offer the following benefits:

❍ Reduced maintenance costs and downtime because of excellent antiwear properties under heavy loads and at high temperatures

❍ Outstanding low temperature pumpability❍ Extended intervals between relubrication due to long product life under arduous

conditions❍ Reduced energy consumption resulting from low traction properties

Applications

Mobliltemp SHC 100 Special has a recommended operating temperature range of -50oC to +200oC with appropriate relubrication intervals. It is particularly suited for the lubrication of high

http://dallnd6.dal.mobil.com/Apps/DS/_39gj50ko_...6/28f6f67405fa31f3852568270072ba93?OpenDocument (1 of 3) [8/30/2002 11:14:11 AM]


temperature bearings and cams, ways and other sliding elements where a wide operating temperature range and extended relubrication intervals are required. Mobiltemp SHC 100 Special is also recommended for use in constant velocity joints under severe conditions (high torque, high and low temperatures).

Mobiltemp SHC 460 Special has a recommended operating range of -40oC to +200oC with appropriate relubrication intervals. This grease provides outstanding performance in severe applications where very high temperatures and/or low temperatures are encountered. It is recommended for the lubrication of components such as oven conveyor or kiln bearings which are subject to high temperatures or cycling from normal to high temperatures. Mobiltemp SHC 460 Special is particularly suited for the lubrication of cams, ways and other sliding machine elements subject to long relubrication intervals, limited motion or shock loading.

Typical PropertiesMobiltemp SHC 100 Special 460 Special

Product Code 971185 971061

Test MethodNLGI Grade ASTM D217 2 1

Thickener Type - Clay Clay

Structure - Smooth Smooth

Color Visual Gray/Black Gray/Black

Penetration at 25oC ASTM D217

Worked 280 325

Dropping Point, oC ASTM D2265 260+ 260+

Viscosity of Base Oil ASTM D445

cSt at 40oC 100 460

cSt at 100oC 14 45

4-Ball Wear, ASTM D2266



Scar diameter, mm 0.45 0.45

4-Ball Weld, Load, Kg ASTM D2596

Rust Protection IP 220 Mod.

Distilled Water

Washout Test 0 0

Health & Safety

Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin contact areas with soap and water. Additional health and safety information on these products, including Material Safety Data Bulletins, is available on request from your local Mobil company.

Mobil Oil CorporationGLOBAL LUBES DEVELOPMENT3225 Gallows Road, Fairfax, Virginia 22037-0001

Mobiltemp SHC Special SeriesPDS 3086

February 1995 All rights reserved.

Due to continual product research and development, the information contained herein is subject to changes without notification.

___________________________________________________________________


Mobiltemp SHC 100 Special and 460 Special

Documents

Transcript of Mobiltemp SHC 100 Special and 460 Special