Mobility Parameters

1 .Intra Frequency Measurements

Black line is the serving cellqualMeasQuantity=EcNoSintrasearch=22

1 .Intra Frequency Cell Reselection

qualMeasQuantity=EcNoQoffset2sn=0Qhsyt2=4Treselection=2sec

reportingRange1a=6, 3dBHysteresis1a=0(No hysteresis)timeToTrigger1a=11320ms

1 .Event 1a(ADD)-ACTIVE SET NOT FULL

When a P-CPICH not in the Active Set, enters (reportingRange1a+hysteresis1a/2) fortimeToTrigger1a

reportingRange1b=10, 5dBHysteresis1b=0(No hysteresis)timeToTrigger1b=12640ms

1 .Event 1b(REMOVE)

When a P-CPICH, included in the Active Set, leaves (reportingRange1b-hysteresis1b/2) fortimeToTrigger1b

reportingRange1a=6, 3dBHysteresis1c=21dBtimeToTrigger1c=11320ms

When a P-CPICH not included in the Active Set becomes stronger than the weakest P-CPICH hysteresis1c/2 in the Active set for timeToTrigger1c

1 .Event 1c

1 .Event 1d

Hysteresis1d=157.5dBtimeToTrigger1d=142560ms

When any P-CPICH becomes stronger than the best cell in the Active Set by hysteresis1d/2 for timeToTrigger1d

1 .Inter Frequency Measurements

Black line is the serving cellqualMeasQuantity=EcNoSintrasearch=21

usedFreqThresh2dEcno=-13dBTimeToTrigger2dEcNo=320msTimeToTrigger2fEcNo=1280msHysteresis2d=0dBHysteresis2f=0bB

1 .WCDMA F2 to F1 Comp Mode

1 .WCDMA F2 to F1 Comp Mode

usedFreqThresh2dRSCP=-100dBTimeToTrigger2dRSCP=320msTimeToTrigger2fRSCP=1280msHysteresis2d=0dBHysteresis2f=0bB

1 . Measurements on GSM

sRatSearch=4dBqQualMin=-18dB

1 .WCDMA to GSM cell Reselection

qoffset2sn=7dBqHyst1=4dB

1 .WCDMA to GSM Comp Mode

usedFreqThresh2dEcno=-13dBTimeToTrigger2dEcNo=320msTimeToTrigger2fEcNo=1280msHysteresis2d=0dBHysteresis2f=0bB

1 .WCDMA to GSM Comp Mode

usedFreqThresh2dRSCP=-100dBTimeToTrigger2dRSCP=320msTimeToTrigger2fRSCP=1280msHysteresis2d=0dBHysteresis2f=0bB

1 .WCDMA to GSM Handover Execution

usedFreqThresh2dRSCP=-100dBusedFreqThresh2dEcNo=-13dBUtranRelThresh3aEcNo=-1dBUtranRelThresh3RSCP=-3TimeToTrigger3a=100ms