Mobile Network Monitoring - NPC, Mihajlo Prerad
8
Net Optics Confidential and Proprietary Net Optics Confidential and Proprietary How To Optimize Mobile Network Monitoring
-
Upload
network-performance-channel-gmbh -
Category
Technology
-
view
64 -
download
1
description
Net Optics "Director" helps solve problem in major Eastern Europe Mobile network operator, with optimizing mobile network monitoring infrastructure and helping with: - Aggregation: collecting many inputs into few outputs - Filtering: cutting out unnecessary traffic and collecting only information of interest - Any tool Any time: enabled connecting both copper and fiber interfaces at same time, doing automatic data rate/media conversion - Density: high density, with 4 x 10G ports and 34 x 1G ports - Modularity: highly modular device with 2 x 12 ports modules, enabling scalability and future proof solutions. Net Optics offers a full spectrum of high-performance, scalable and intelligent solutions for virtualization, 10/40/100G, and 4G/LTE.
Transcript of Mobile Network Monitoring - NPC, Mihajlo Prerad
Net Optics Confidential and Proprietary Net Optics Confidential and Proprietary
How To Optimize
Mobile Network Monitoring
2
Architecture
5 x 1G
Packet Switched Core Network
5 x 1G
InternetUMTS
3
Monitoring points
5 x 1G
Packet Switched Core Network
5 x 1G
InternetUMTS
HOW TO CONNECT?
5 x 10G
4
Challenges
• Not enough SPAN ports to connect all the tools
• Too expensive deployment for each link
• Too much unwanted traffic for tools (needed only specific
traffic from specific range of IP addresses)
• Low utilization of links – no need for probe on each link
• Compliance issues
• Deadline from management!
5
Solution: 28 inputs -> 8 outputs (ports)
5 x 1G
5 x 1G
InternetUMTS
aggregation
+ Filtering
IP=10.223.15.11
5 x 10G
6
Director solves the problem!
• Aggregation: input from 14 full-duplex 1G links to only 8 outputs
• L2-L4 Filtering: filter for specific IPv4 or IPv6 address, MAC,
protocl, port number, VLAN tag or any L2-L4 criteria
• Any-tool-any-time: SFP based, connected both fiber and copper
interfaces with automatic media/data rate conversion!
• Modularity: 2 x 12 ports modules (copper or fiber) + 10 SFP ports
• Density: 4 x 10G ports + 34 x 1G ports
http://www.netoptics.com/products/director/director-network-packet-broker
7
Benefits
• Lowered deployment costs for 35%
o Aggregated many links into few outputs
o No need for additional expensive probes
o No need for wasting ports on switch for SPAN
o Any tool – Any time: connected both copper and fiber devices
• Scalable and flexible solution
o 24/7 passive access to network
o Additional ports for future use
o Always free port for external audit of network
• Fail-safe environment
o Passive access to critical network points
o No interruption of critical network links (power outrage
Net Optics Confidential and Proprietary Net Optics Confidential and Proprietary
Thank you!
Mihajlo PreradInternational Sales and Presales
t: +43 664 831 6674
www.network-taps.eu | www.np-channel.com
