MMR SDHCFirmware Update Manual

Media Reader Application Update Tool

Fuji Photo Film co.,Ltd. 1/11

Digital Photo Center(DPC)

ET Software for Digital Photo Center(DPC-ET)

Media Reader

Application Update install manual

Fuji Photo Film Co.,Ltd.



Contents

TARGET HARDWARE PRODUCTS ....................................................................................................................... 3 FOR DPC USERS ............................................................................................................................................... 4 FOR DPC-ET USERS ......................................................................................................................................... 6 FOR DI CONTROLLER OR OTHER USERS............................................................................................................ 9

Preparation

1. Open the folder of the firmware archive you received via E-mail.

2. It consists of 2 folders and 20 files.

3. Copy all files into root directory CD-R.

!! This utility must to be run from the CD-ROM.



Target Hardware Products

8-slot DPC MMR

6-slot DPC MMR

8-slot I/O Box MMR

MMR-V0028.0261-0J-000 makes your MMR could read SDHC type SD memory card.

Reading SDHC card without this update may causes system hung up.



For DPC users

<Importance> when there is unsettled order data, please operate next step after completing process.

1. Insert this CD in the CD tray.

2. Touch the upper left space once.

*It is the same operation when using a mouse.

1, Enter “1111”.

2, Touch the “ OK “ button.

1, Touch the “ QUIT “button.

1. Touch the “ Future Release Tools “.



1. Touch the “ OK “ button after checking that

other application have not run.

*When the other application has run, please quit.


other media are not inserted in a slot except

this CD.

1. The update starts automatically.

*It requires about 1 minute.

* Do not operate other matter in this period.

1. Touch the “ OK “ button after the update is

completed successfully.



For DPC-ET users


2. Touch the upper left space and touch the

upper right space continually.

*It is the same operation when using a mouse.

1, Enter “999999”.

2, Touch the “ OK “ button.

1. Touch the “ System maintenance “ button.

1. Select the “ Standard Service System

settings ”.

2. Touch the “ Execute “ button.



1. Touch the “ Software update “ button.

1. Touch the “ CD-ROM “ button.

1. Touch the “ Start update “ button.



*When the other application has run, please quit





this CD.








For DI controller or other users


2. Select “Start “ and “ Run “ in the taskbar of

operation system.

1. Touch the “ Browse “ button.

1. Select “ Programs “ in the list box of Files of

type.

2. Touch the “ My Computer “ button.

1. Select the CD-ROM drive.

2. Touch the “ Open “ button.



1. Select the “ Vupdate ” in the CD-ROM.

2. Touch the “ Open “ button.

1. Make sure the drive name and file name of a list

box.

2. Touch the “ OK “ button.



this CD.



*When the other application has run, please quit

MMR SDHCFirmware Update Manual

Documents

Transcript of MMR SDHCFirmware Update Manual