2015 Mitsubishi Mirage Factory Brochure - Bob Smith Mitsubishi
Mitsubishi PV-MF100EC4_
-
Upload
fulvio-monti -
Category
Documents
-
view
218 -
download
0
Transcript of Mitsubishi PV-MF100EC4_
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 1/7
2006/04/26
No. GDEE1839
SPECIFICATION FOR PRODUCTS
PRODUCTS NAME PHOTOVOLTAIC MODULE
MODEL NAME PV-MF100EC4
Signature
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 2/7
2006/04/26
No. GDEE1839
Specification for ProductsMODEL NAME: PV MODULE
PV-MF100EC4
1. SCOPE
This specification covers the design, performance, and warranty for Photovoltaic module, PV-MF100EC4,hereinafter referred as to "PV module", manufactured by Mitsubishi Electric Corporation Nakatsugawa Works.
2. GENERALPV module shall be installed in Photovoltaic system and be used to generate DC power using solar energy.
3. CERTIFICATION
PV module is :
listed by Underwriter’s Laboratories for UL 1703.
certified for IEC 61215.
4. DESIGN CONDITION
4.1 Climate Condition
Ambient temperature: -20°C to 40°C
Operating temperature: -20°C to 83°C
Snowfall pressure: below 2000Pa.
Wind pressure: below 3000Pa.
Water resistance/damage: PV module shall not be immersed in water and shall not be continually exposed towater from a sprinkler, fountain or the like.
Corrosion warning: PV module shall not be installed in corrosive area like
APPROVED CHECKED WRITTEN
Apr.24,
2006
Y. Kishizoe
Apr.21,
2006
T. Hiraoka
Apr.19,
2006
M. Suzuki
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 3/7
No. GDEE1839
Table 6.1 Electric performance
Term Abbr. Unit Nominalvalue
Tolerance
Maximum power Pmax W 100 Nominal value +15%,-5%
Open circuit voltage Voc V 20.8 Nominal value ±10%
Short circuit current Isc A 6.88 Nominal value ±10%
Maximum power voltage Vmp V 16.7 -
Maximum power current Imp A 5.99 -Standard Test Conditions (STC)
Module temperature: 25°C
Irradiance: 1000W/m2
Spectral distribution: AM1.5 reference global solar radiation according to IEC 60904-3.
Measuring condition
Module temperature: 15 to 35°C
Irradiance: 1000W: 1000±50W/m2
7. STRUCTURE
The structure is shown in attached drawing NR606033.
8. LEAD - FREE SOLDER
Lead-free solder is used for the interconnection circuitry and terminals.
9. PACKAGING AND RATING LABEL
9.1 Packaging
Packaging style is shown in appendix 1.
9.2 Rating Label
Rating label is shown in appendix 2.
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 4/7
No. GDEE1839
Appendix 1: Packaging style
Top cart on box
Polypropylene ba nd
Adhesive ta pe
Pad
Serial number label
corr esponding t o modules
Installation Instructions
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 5/7
No. GDEE1839
Appendix 2: Rating label
8/7/2019 Mitsubishi PV-MF100EC4_
http://slidepdf.com/reader/full/mitsubishi-pv-mf100ec4 6/7
2006/04/26
No. GDEE1839
REVISION RECORD
DATE Revisionindex Description Written Approved
Apr.19, 2006 - Established M. Suzuki -