MITSUBISHI NEW PRODUCT RELEASE · combined model AJ65SBTC1-32DT3 ... Protection function None...

2002 No.172E NEW PRODUCT RELEASE

Open Field Network CC-Link AJ65SBTB1-8T1, AJ65SBTB2-8T1, AJ65SBTB2-16T1, AJ65SBTC1-32T1, AJ65SBTB1-16DT3, AJ65SBTB1-32DT3, AJ65SBTB32-8DT2, AJ65SBTB32-16DT2, AJ65SBTC4-16DT2, AJ65SBTC1-32DT2, AJ65SBTC1-32DT3 CC-Link system compact remote I/O modules

New!

MITSUBISHI

2

[Features]

(1) Suitable for systems that control light load devices, i.e. LED indicators. These modules use transistor output that generates less leakage current when output is off. Since the output leakage-current is small, it prevents load devices that operate at small currents, such as LED indicators, from malfunctioning (the leakage current is 0.1mA or less when the output is off).

(2) The AJ65SBTB1-16DT3, AJ65SBTB1-32DT3 and AJ65SBTC1-32DT3 are suitable for systems that require high-speed response. These models respond to input within 0.2ms at power on/off.

[Difference between old and new models.]

The following table shows the differences between old and new models. Item New model Old model

AJ65SBTB1-8T1 AJ65SBTB1-8T AJ65SBTB2-8T1 AJ65SBTB2-8T AJ65SBTB2-16T1 AJ65SBTB2-16T

Transistor output model

AJ65SBTC1-32T1 AJ65SBTC1-32T AJ65SBTB1-16DT3 AJ65SBTB1-16DT1 AJ65SBTB1-32DT3 AJ65SBTB1-32DT1 AJ65SBTB32-8DT2 AJ65SBTB32-8DT AJ65SBTB32-16DT2 AJ65SBTB32-16DT AJ65SBTC4-16DT2 AJ65SBTC4-16DT AJ65SBTC1-32DT2 AJ65SBTC1-32DT

Type

DC input transistor output combined model

AJ65SBTC1-32DT3 AJ65SBTC1-32DT1 Leakage current (when output is off) 0.1mA or less 0.25mA or less Protection function None Overload protection function,

overvoltage protection function, overheat protection function

* Low-leakage current type models do not include the same protection function as the old models. Use the old models when protection function is necessary.

3

[Specifications]

(1) AJ65SBTB1-8T1 transistor output module (Sink type) Transistor output module Form

Specification AJ65SBTB1-8T1 Surface shape Number of output points 8 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.5A/point (when all point is ON : 0.3A/point)

2.4A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A

0.6V or lower (MAX) 0.5A Output method Sink type Protection function None

OFF ON 0.5ms or lower Response time ON OFF 1.5ms or lower (resistive load)

Voltage 10.2 - 26.4VDC (ripple ratio: within 5%) External Power supply for output

Current 15mA or lower (when 24VDC and all point is ON) Not including external load current

Surge suppression Zener diode Common wiring method 8 points/common (terminal block single wire type) Number of stations occupied

1 station 32 points assignment (use 8 points)

Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 35mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier

frequency 25 - 60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.14 (0.31) External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply

terminal), Direct-type 10-point terminal block (I/O power supply area) (M3 screw)

Applicable solderless terminal

• RAV1.25-3 R1.25-3 (in conformance with JIS C 2805) [Applicable wire size: 0.3 -1.25mm2]

• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)

• 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]

Accessory User’s Manuals

AJ65

SBT

B1-

8T1

Y01

23

45

67 Y0

Y2Y4

Y6

Y1Y3

Y5Y7

DA

DG

+24V

24G

DB

SLD

(FG

)

CTL

+ CO

M-

12

41

24

1020

408

ON

STA

TIO

N N

O.

B R

ATE

External connection Terminal number Signal name

TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 Y1 TB10 Y2 TB11 Y3 TB12 Y4 TB13 Y5 TB14 Y6 TB15 Y7 TB16 CTL+ TB17 COM-

I/O module power supply

DADBDGSLD+24VFG24G

21

34567

Y0Y1Y2Y3Y4Y5Y6

98

1011121314

Y715CTL+16COM-17

Load power supply

External supplypower for output

L

L

L

L

Y08Y19Y210Y311Y412Y513Y614Y715CTL+16COM-17

Constantvoltage circuit

Insulation

DC/DC

When external supply power for output and load power supply are combined.

4

(2) AJ65SBTB2-8T1 transistor output module (Sink type)

Transistor output module Form Specification AJ65SBTB2-8T1 Surface shape Number of output points 8 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range

10.2 - 26.4VDC (ripple ratio: within 5%)

Max. load current 0.5A/point (when all point is ON: 0.3A/point) 2.4A/common

Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A

0.6V or lower (MAX) 0.5A Output method Sink type Protection function None



Current 17.8mA or lower (when 24VDC and all point is ON) Not including external load current

Surge suppression Zener diode Common wiring method 8 points/common

(terminal block 2-wire type) Number of stations occupied


Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 45mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier frequency

25 - 60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply

terminal), Direct-type 18-point terminal block (I/O power supply area) (M3 screw)

Applicable solderless terminal

• RAV1.25-3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 -.25mm2]

• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3 (Japan Terminal Co., Ltd.)


Accessory User’s Manual C

OM

CO

MC

OM

CO

MC

OM

CO

MC

OM

CO

MD

C24

GD

C24

VY7

Y6Y5

Y4Y3

Y2Y1

Y0

4020

108

42

14

21

B R

ATE

STAT

ION

NO

.

ON

PWL

RU

NL

ERR

Y01

23

45

67

AJ6

5SB

TB2-

8T1

DA

DG

+24V

24G

DB

SLD

(FG

)

MIT

SU

BIS

HI


TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 COM TB10 Y1 TB11 COM TB12 Y2 TB13 COM TB14 Y3 TB15 COM TB16 Y4 TB17 COM TB18 Y5 TB19 COM TB20 Y6 TB21 COM TB22 Y7 TB23 COM TB24 DC24V TB25 DC24G


DC/DC

DADBDGSLD+24VFG24G

21

34567

Y0COMY1COMY2COMY3

98

1011121314

COMY4COMY5COMY6COM

1615

1718192021

Y7COMDC24VDC24G

22232425

L


Insulation


5

(3) AJ65SBTB2-16T1 transistor output module (Sink type)

Transistor output module Form Specification AJ65SBTB2-16T1 Surface shape Number of output points 16 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.5A/point (when all point is ON: 0.22A/point) 3.6A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.5A 0.6V or lower (MAX) 0.5A Output method Sink type Protection function None



Current 24.2mA or lower (when 24VDC and all point is ON) Not including external load current

Surge suppression Zener diode Common wiring method 16 points/common (terminal block 2-wire type) Occupied station number 1 station 32 points assignment (use 16 points)

Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 55mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier frequency 25 -

60Hz (noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.25 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply

terminal), Direct-type 34-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal • RAV1.25-3.5 (in conformance with JIS C 2805)

[Applicable wire size: 0.3 -1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),

RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]

Accessory User’s Manual

4020

108

42

14

21

B R

ATE

STA

TIO

N N

O.

ON CO

MC

OM

CO

MC

OM

CO

MC

OM

CO

MD

C24

GD

C24

VY

FY

EY

DY

CY

BY

AY

9C

OM

CO

MC

OM

CO

MC

OM

CO

MC

OM

CO

MC

OM

Y8

Y7

Y6

Y5

Y4

Y3

Y2

Y1

Y0

PW

L R

UN

L ER

RY

01

23

45

67

Y8

9A

BC

DE

F

AJ6

5SBT

B2-

16T1

DA

DG

+24V

24G

DB

SLD

(FG

)

MIT

SUBI

SHI


TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G TB8 Y0 TB9 COM TB10 Y1 TB11 COM TB12 Y2 TB13 COM TB14 Y3 TB15 COM TB16 Y4 TB17 COM TB18 Y5 TB19 COM TB20 Y6 TB21 COM TB22 Y7 TB23 COM TB24 Y8 TB25 COM TB26 Y9 TB27 COM TB28 YA TB29 COM TB30 YB TB31 COM TB32 YC TB33 COM TB34 YD TB35 COM TB36 YE TB37 COM TB38 YF TB39 COM TB40 DC24V

DC/DC

DADBDGSLD+24VFG24G

21

34567

Y0COMY1COMY2COMY3

1011121314

COMY4COMY5COM

1615

171819

Y620COMY7COMY8COM

2221

232425

Y926COMYACOMYBCOM

2827

293031

YC32COMYDCOMYECOM

3433

353637

YF38COMDC24VDC24G

4039

41

89

L



Insulation


TB41 DC24G

6

(4) AJ65SBTC1-32T1 transistor output module (Sink type)

Transistor output module Form Specification AJ65SBTC1-32T1 Surface shape Number of output points 32 points Insulation method Photocoupler Rated load voltage 12/24VDC Operating load voltage range 10.2 - 26.4VDC (ripple ratio: within 5%) Max. load current 0.1A/point 3.2A/common Max. inrush current 1.0A 10ms or lower Leakage current at OFF 0.1mA or lower Max. voltage drop at ON 0.3V or lower (TYP) 0.1A, 0.6V or lower (MAX) 0.1A Output method Sink type Protection function None




Surge suppression Zener diode Common wiring method 32 points/common (quick connector plug single wire type) Number of stations occupied 1 station 32 points assignment (use 32 points)

Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 60mA or lower (when 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 s, noise carrier

frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power

supply terminal), Direct-type 2-point terminal block (I/O power supply area) (M3 screw) Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)

Transmission circuit, module power supply terminal and I/O power supply area

• RAV1.25-3.5 (in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2]

• V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]

Applicable wire size

I/O area connector

• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size: 0.14 - 0.2mm2]


Accessory User's Manual

AJ65SBTC1-32T1

12

41

24

1020

408

ON

STATION NO.

B RATE

Y01

23

45

67

Y8Y0-YF

Y10-Y1F

9A

BC

DE

F

Y1011

1213

1415

1617

Y1819

1A1B

1C1D

1E1F

DADG

+24V

24G

DBSLD

(FG)

CTL

COM|

Y1D

Y1E

Y1F

Y1C

Y19

Y1A

Y1B

Y18

Y15

Y16

Y17

Y14

Y11

Y12

Y13

Y10

YD YE YFYCY9 YA YBY8

Y5 Y6 Y7Y4Y1 Y2 Y3Y0

External connection Terminal number Signal name Pin number Signal name

TB1 DA CON1-1 Y0 TB2 DB CON1-2 Y1 TB3 DG CON1-3 Y2 TB4 SLD CON1-4 Y3 TB5 +24V CON2-1 Y4 TB6 FG CON2-2 Y5 TB7 24G CON2-3 Y6 TB8 CTL+ CON2-4 Y7 TB9 COM- CON3-1 Y8

Pin arrangement CON3-2 Y9 CON3-3 YA CON3-4 YB CON4-1 YC CON4-2 YD CON4-3 YE CON4-4 YF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E

DADBDGSLD

DC/DC+24VFG24G

CTL+COM-

L

L

L

L

CTL+COM-

L

CON11

2

3

4

CON81

2

3

4

89

89

21

34567I/O module

power supply

Load power supply


Constantvoltagecircuit

Insulation

When external supply power for output and load power supply are combined.

1

CON2

CON1

CON3

CON4

CON5

CON6

CON7

CON8

234

Top view

CON8-4 Y1F

7

(5) AJ65SBTB1-16DT3 combined module

DC input transistor output combined module Form Specification AJ65SBTB1-16DT3 Surface shape

Input specification Output specification Number of input points 8 points Number of output points 8 points Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load voltage

range 19.2 - 26.4VDC

(ripple ratio: within 5%) Operating voltage range


Max. load current 0.5A/point 2.4A/common

Max. simultaneous input points

100% Max. inrush current 1.0A 10ms or lower

ON voltage/ON current 15V or higher/3.0mA or higher Leakage current at OFF 0.25mA or lower OFF voltage/OFF current

3V or lower/0.5mA or lower Max. voltage drop at ON 0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A

Output form Sink type Input resistance Approx. 4.7k Protection function None

OFF ON 0.2ms or lower (when 24VDC) OFF ON 0.5ms or lower Response time ON OFF 0.2ms or lower (when 24VDC)

Sink type ON OFF 1.5ms or lower (resistive load)

Voltage 19.2 - 26.4VDC (ripple ratio: within 5%)

External Power supply for output

Current 17.8mA or lower (When 24VDC and all point is ON) Not including external load current

Input form Sink type Surge suppression Zener diode Common wiring method

16 points/common (Terminal block single wire type)

Number of stations occupied


Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply

Current 55mA or lower (When 24VDC and all point is ON)

Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition)

Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external

terminals and ground Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),

Direct-type 18-point terminal block (I/O power supply area) (M3 screw) Applicable solderless terminal

• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),

RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - o 2mm2]

Accessory User's Manual X7

X5X3

X1Y9

9BYD

YFYE

YCYA

Y8X6

X4X2

X0

4020

108

42

14

21

B R

ATE

STAT

ION

NO

.

ON

AJ6

5SBT

B1-1

6DT3

DA

DG

+24V

24G

DB

SLD

(FG

)

MIT

SUBI

SHI

PWL

RUN

L ER

RX0

12

34

56

7Y8

9A

BC

DE

F

CO

M+ CO

M-

External connection Terminal number

Signal name

Pin number

Signal name

TB1 DA TB8 X0 TB2 DB TB9 X1 TB3 DG TB10 X2 TB4 SLD TB11 X3 TB5 +24V TB12 X4 TB6 FG TB13 X5 TB7 24G TB14 X6

TB15 X7 TB16 Y8 TB17 Y9 TB18 YA TB19 YB TB20 YC TB21 YD TB22 YE TB23 YF TB24 COM+ TB25 COM-

DC/DC

DADBDGSLD+24VFG24G

21

34567

X0X1X2X3X4X5X6

98

1011121314

X7Y8Y9YAYBYCYD

1615

1718192021

YEYF

2223

L

R

R

COM+COM-

2425

COM+2425 COM-

L


Load power supply



Insulation

When external power supply for output and load power supply are combined.

8



Input specification Output specification Number of input points 16 points Number of output

points 16 points

Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 5mA Operating load

voltage range 19.2 - 26.4VDC






ON voltage/ON current 15V or higher/3.0mA or higher Leakage current at OFF

0.1mA or lower

OFF voltage/OFF current

3V or lower/0.5mA or lower Max. voltage drop at ON

0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A



Sink type ON OFF 1.5ms or lower (resistive load)




Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method 32 points/common (Terminal block single wire type) Number of stations occupied


Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 60mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator

condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external



• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 -1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),

RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]

Accessory User's Manual 40

2010

84

21

42

1B

RA

TEST

ATI

ON

NO

.

ON Y1

9Y1

7Y1

5Y1

3YB

YDYF

CO

M-

CO

M+

YEYC

YAY1

8Y1

6Y1

4Y1

2X7

X5X3

X1X9

XBXD

XFY1

1Y1

0XE

XCXA

X8X6

X4X2

X0

PWL

RU

NL

ER

RX0

12

34

56

7X8

9A

BC

DE

F

AJ6

5SB

TB1-

32D

T3D

AD

G+2

4V24

GD

BSL

D(F

G)

MIT

SUBI

SHI

Y101

112

1314

1516

17Y1

819

1A1B

1C1D

1E1F


Signal name

Terminal number

Signal name

TB1 DA TB21 XD TB2 DB TB22 XE TB3 DG TB23 XF TB4 SLD TB24 Y10 TB5 +24V TB25 Y11 TB6 FG TB26 Y12 TB7 24G TB27 Y13

Terminal number

Signal name

TB28 Y14

TB8 X0 TB29 Y15 TB9 X1 TB30 Y16 TB10 X2 TB31 Y17 TB11 X3 TB32 Y18 TB12 X4 TB33 Y19 TB13 X5 TB34 Y1A TB14 X6 TB35 Y1B TB15 X7 TB36 Y1C TB16 X8 TB37 Y1D TB17 X9 TB38 Y1E TB18 XA TB39 Y1F TB19 XB TB40 COM+ TB20 XC TB41 COM-

DC/DC

DADBDGSLD+24VFG24G

21

34567

X0X1X2X3X4X5X6

1011121314

X7X8X9XAXB

1615

171819

XC20XDXEXFY10Y11

2221

232425

Y1226Y13Y14Y15Y16Y17

2827

293031

Y1832Y19Y1AY1BY1CY1D

3433

353637

Y1E38Y1FCOM+COM-

4039

41

89

L

R

R

COM+4041 COM-

L


Load power supply



Insulation

When external power supplyfor output and load power supply are combined.

9




points 4 points

Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 7mA Operating load voltage


(ripple ratio: within 5%) Operating voltage range 19.2 - 26.4VDC

(ripple ratio: within 5%) Max. load current 0.5A/point

1.2A/common Max. simultaneous input points



0.25mA or lower

OFF voltage/OFF current 6V or lower/1.7mA or lower Max. voltage drop at ON


Output form Sink type. Input resistance Approx. 3.3k Protection function None


Response time ON OFF 1.5ms or lower (resistive load)




Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method 8 points/common (3-wire type terminal block: input, 2-wire type terminal block: output) Number of stations occupied


Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 45mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise

simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.18 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),


• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 to1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),

RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]


CO

M-

CO

M+

CO

M-

CO

M+

CO

M+

CO

M+

CO

M+

CO

M+

DC

24G

DC

24V

YBYA

Y9Y8

X3X2

X1X0

4020

108

42

14

21

B R

ATE

STAT

ION

NO

.

ON

PWL

RU

NL

ERR

X01

23

Y89

AB

AJ6

5SBT

B32-

8DT2

DA

DG

+24V

24G

DB

SLD

(FG

)

MIT

SUBI

SHI


Signal name

Terminal number

Signal name

TB1 DA TB8 X0 TB2 DB TB9 COM+ TB3 DG TB10 X1 TB4 SLD TB11 COM- TB5 +24V TB12 X2 TB6 FG TB13 COM+ TB7 24G TB14 X3

TB15 COM- TB16 Y8 TB17 COM+ TB18 Y9 TB19 COM+ TB20 YA TB21 COM+ TB22 YB TB23 COM+ TB24 DC24V

DC/DC

DADBDGSLD+24VFG24G

21

34567

X0COM+X1COM-X2COM+X3

98

1011121314

COM-Y8COM+Y9COM+YACOM+

1615

1718192021

YBCOM+DC24VDC24G

22232425

L

R

R




Insulation

3-wire typesensor

TB25 DC24G

10




points 8 points

Insulation method Photocoupler Insulation method Photocoupler Rated input voltage 24VDC Rated load voltage 24VDC Rated input current Approx. 7mA Operating load voltage








0.1mA or lower

OFF voltage/OFF current

6V or lower/1.7mA or lower Max. voltage drop at ON




Response time ON OFF 1.5ms or lower (resistive load)




Input form Negative common (Sink type) Surge suppression Zener diode Common wiring method

16 points/common (3-wire type terminal block: input, 2-wire type terminal block: output)

Number of stations occupied


Voltage 20.4 - 26.4VDC(ripple ratio: within 5%) I/O module power supply Current 50mA or lower (When 24VDC and all point is ON) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator

condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external



• RAV1.25-3.5(in conformance with JIS-C2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.) [Applicable wire size: 1.25 - 2mm2]


4020

108

42

14

21

B R

ATE

STA

TIO

N N

O.

ON

CO

M+

CO

M+

CO

M+

CO

M+

CO

M+

CO

M+

CO

M+

DC

24G

DC

24V

YFYE

YDYC

YBYA

Y9C

OM

-C

OM

+C

OM

-C

OM

+C

OM

+C

OM

-C

OM

+C

OM

-C

OM

+Y8

X7X6

X5X4

X3X2

X1X0

PWL

RU

NL

ER

RX0

12

34

56

7Y8

9A

BC

DE

F

AJ6

5SB

TB32

-16D

T2D

AD

G+2

4V24

GD

BSL

D(F

G)

MIT

SUBI

SHI


Signal name

Terminal number

Signal name

TB1 DA TB21 COM+ TB2 DB TB22 X7 TB3 DG TB23 COM- TB4 SLD TB24 Y8 TB5 +24V TB25 COM+ TB6 FG TB26 Y9 TB7 24G TB27 COM+

Terminal number

Signal name

TB28 YA

TB8 X0 TB29 COM+ TB9 COM+ TB30 YB TB10 X1 TB31 COM+ TB11 COM- TB32 YC TB12 X2 TB33 COM+ TB13 COM+ TB34 YD TB14 X3 TB35 COM+ TB15 COM- TB36 YE TB16 X4 TB37 COM+ TB17 COM+ TB38 YF TB18 X5 TB39 COM+ TB19 COM- TB40 DC24V TB20 X6 TB41 DC24G

DC/DC

DADBDGSLD+24VFG24G

21

34567

X0COM+X1COM-X2COM+X3

1011121314

COM-X4COM+X5COM-

1615

171819

X620COM+X7COM-Y8COM+

2221

232425

Y926COM+YACOM+YBCOM+

2827

293031

YC32COM+YDCOM+YECOM+

3433

353637

YF38COM+DC24VDC24G

4039

41

89

R

R

L




Insulation

3-wire typesensor

11

(9) AJ65SBTC4-16DT2 combined module

DC input transistor output combined module Form Specification AJ65SBTC4-16DT2 Surface shape




(ripple ratio: within 5%) Max. load current 0.5A/point

(when all point is ON : 0.3 A/point) 2.4A/common



ON voltage/ON current 14V or higher/ 3.5mA or higher

Leakage current at OFF 0.1mA or lower

OFF voltage/OFF current 6V or lower/1.7mA or lower Input resistance Approx. 4.7k

Max. voltage drop at ON 0.3V or lower (TYP)0.5A 0.6V or lower (MAX)0.5A

Output method Sink type OFF ON 1.5ms or lower (when 24VDC) Protection function None

Response time

ON OFF 1.5ms or lower (when 24VDC)

OFF ON 0.5ms or lower

Input form Negative common (Sink type)

Response time

ON OFF 1.5ms or lower (resistive load)


External Power supply for output Current 13mA or lower

(when 24VDC and all point is ON) Not including external load current

Surge suppression Zener diode Common method 16 points/common (quick connector plug 4 wire type) Number of stations occupied


Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 40mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p,

noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester between all DC external

terminals and ground Level of protection IP20 Weight (kg) 0.15 External connection method

7-point 2-piece terminal block (transmission circuit, module power supply terminal), Direct-type 2-point terminal block (I/O power supply area) (M3 screw), Dedicated quick connector (4-pin pressure-displacement type, connector plug sold separately.)


• RAV1.25-3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2] • V2-MS3 (Japan Solderless Terminal Mfg. Co., Ltd.),

RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.) • 2-3N, 2-3S (NICHIFU TERMINAL INDUSTRIES Co., Ltd.)

[Applicable wire size: 1.25 - 2mm2]


I/O area connector

• φ1.0 - 1.4 (A6CON-P214), φ1.4 - 2.0 (A6CON-P220) [Applicable wire size : 0.14 - 0.2mm2]

• φ1.0 - 1.4 (A6CON-P514), φ1.4 - 2.0 (A6CON-P520) [Applicable wire size : 0.3 - 0.5mm2]


AJ65

SBTC

4-16

DT2

12

41

24

10

YF +24V

24G

X7

2040

8

ON

STA

TIO

N N

O.

B R

ATE

X01

23

45

67

Y89

AB

CD

EF

DA

DG

+24V

24G

DB

SLD

(FG

)

CTL

+ CO

M-

YE +24V

24G

X6YD +2

4V24

G

X5YC +2

4V24

G

X4YB +2

4V24

G

X3YA +2

4V24

G

X2Y9 +24V

24G

X1Y8 +24V

24G

X0

12

External connection

Pin arrangement Terminal number

Signal name

Terminal number

Signal name

TB1 DA CON4-1 X3 TB2 DB CON4-2 YB TB3 DG CON4-3 +24V TB4 SLD CON4-4 24G TB5 +24V CON5-1 X4 TB6 FG CON5-2 YC TB7 24G CON5-3 +24V

Terminal number

Signal name

CON5-4 24G

CON1-1 X0 CON6-1 X5 CON1-2 Y8 CON6-2 YD CON1-3 +24V CON6-3 +24V CON1-4 24G CON6-4 24G CON2-1 X1 CON7-1 X6 CON2-2 Y9 CON7-2 YE CON2-3 +24V CON7-3 +24V CON2-4 24G CON7-4 24G CON3-1 X2 CON8-1 X7 CON3-2 YA CON8-2 YF CON3-3 +24V CON8-3 +24V CON3-4 24G CON8-4 24G

Terminal number

Signal name

TB8 CTL+ TB9 COM-

1

CON2

CON1

CON3

CON4

CON5

CON6

CON7

CON8

234

Top view

<Connection example for 4-wire, 3-wire, 2-wire sensor>

DC/DC

DADBDGSLD+24VFG24G

21

34567

CON1Black (white)

Orange (Orange)

Red (Red)

Bule (Black)

RR

4-wire type sensor(sink output sink input)

CON21

2

3

4

RR

CON81

2

3

4

RR

CTL+COM-

89

1

2

3

4



Insulation

Det

ectio

nci

rcui

t

3-wire sensor (sink output)

Det

ectio

nci

rcui

t

2-wire sensor (sink output)

Det

ectio

nci

rcui

t

<Another connection example>

DC/DC

DADBDGSLD+24VFG24G

21

34567

CON1

CON8

1

2

3

4

RR

RR

CTL+COM-

89

L

1

2

3

4


Insulation

(Sink output)

(Sink output)


13






(ripple ratio: within 5%) Max. load current 0.1A/point 1.6A/common

Max. simultaneous ON input points


ON voltage/ON current 14V or higher/3.5mA or higher Leakage current at OFF 0.1mA or lower OFF voltage/OFF current 6V or lower/1.7mA or lower Input resistance Approx. 4.7k

Max. voltage drop at ON

0.3VDC or lower (TYP) 0.1A 0.6VDC or lower (MAX) 0.1A


Response time




Response time

ON OFF 1.5ms or lower (resistive load) Voltage 19.2 - 26.4VDC

(ripple ratio: within 5%)



Surge suppression Zener diode Common method 32 points/common (quick connector plug single wire type) Number of stations occupied


Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 50mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p,

noise width 1 µs, noise carrier frequency 25 - 60Hz(noise simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),

Direct-type 2-point terminal block (I/O power supply area) (M3 screw), Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)


• RAV1.25 –3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2]

• V2 - MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)



I/O area connector




AJ65

SBTC

1-32

DT2

12

41

24

1020

408

ON

STAT

ION

NO

.B

RA

TEX0

12

34

56

7X8

X0-X

F

Y10-

Y1F

9A

BC

DE

F

Y10

1112

1314

1516

17Y1

819

1A1B

1C1D

1E1F

DA

DG

+24V

24G

DB

SLD

(FG

)

CO

M+ C

OM

-

Y1D

Y1E

Y1F

Y1C

Y19

Y1A

Y1B

Y18

Y15

Y16

Y17

Y14

Y11

Y12

Y13

Y10

XD XE XFXCX9 XA XBX8

X5 X6 X7X4X1 X2 X3X0

14

External connection

Pin arrangement Terminal number Signal name TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G

Pin number Signal name CON1-1 X0 CON1-2 X1 CON1-3 X2 CON1-4 X3 CON2-1 X4 CON2-2 X5 CON2-3 X6 CON2-4 X7 CON3-1 X8 CON3-2 X9 CON3-3 XA CON3-4 XB CON4-1 XC CON4-2 XD CON4-3 XE CON4-4 XF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E CON8-4 Y1F

Terminal number Signal name TB8 COM+

DADBDGSLD

DC/DC+24VFG24G

8 COM+9 COM-

L

L

8 COM+9 COM-

L

R

R

R

CON1 to CON4

R

1

2

3

4

CON5 to CON81

2

3

4

21

34567I/O module

power supply

Load power supply



Insulation


1

CON2

CON1

CON3

CON4

CON5

CON6

CON7

CON8

234

Top view

TB9 COM-

15






(ripple ratio: within 5%) Max. load current 0.1A/point 1.6A/common

Max. simultaneous ON input points


ON voltage/ON current 15V or higher/3mA or higher Leakage current at OFF 0.1mA or lower OFF voltage/OFF current 3V or lower/0.5mA or lower Input resistance Approx. 4.7 k

Max. voltage drop at ON 0.3VDC or lower(TYP)0.1A 0.6VDC or lower(MAX)0.1A


Response time




Response time

ON OFF 1.5ms or lower (resistive load) Voltage 19.2 - 26.4VDC

(ripple ratio: within 5%)

External Power supply for output Current 17mA or lower

(when 24VDC and all point is ON) Not including external load current

Surge suppression Zener diode Common method 32 points/common (quick connector plug single wire type) Number of stations occupied


Voltage 20.4 - 26.4VDC (ripple ratio: within 5%) I/O module power supply Current 50mA or lower (when TYP. 24VDC) Noise durability DC type noise voltage 500 Vp-p, noise width 1 µs, noise carrier frequency 25 - 60Hz(noise

simulator condition) Dielectric withstand voltage 500VAC for 1 minute between all DC external terminals and ground Insulation resistance 10MΩ or higher, measured with a 500VDC insulation resistance tester Level of protection IP20 Weight (kg) 0.16 External wiring system 7-point 2-piece terminal block (transmission circuit, module power supply terminal),

Direct-type 2-point terminal block (I/O power supply area) (M3 screw) Dedicated quick connector (4-pin pressure-displacement type, Connector plug sold separately.)


• RAV1.25 –3.5 (in conformance with JIS C 2805) [Applicable wire size: 0.3 - 1.25mm2]

• V2 - MS3 (Japan Solderless Terminal Mfg. Co., Ltd.), RAP2-3S RAP2-3SL (Japan Terminal Co., Ltd.)



I/O area connector




AJ65

SBTC

1-32

DT3

12

41

24

1020

408

ON

STAT

ION

NO

.B

RA

TEX0

12

34

56

7X8

X0-X

F

Y10-

Y1F

9A

BC

DE

F

Y10

1112

1314

1516

17Y1

819

1A1B

1C1D

1E1F

DA

DG

+24V

24G

DB

SLD

(FG

)

CO

M+ C

OM

-

Y1D

Y1E

Y1F

Y1C

Y19

Y1A

Y1B

Y18

Y15

Y16

Y17

Y14

Y11

Y12

Y13

Y10

XD XE XFXCX9 XA XBX8

X5 X6 X7X4X1 X2 X3X0

16

External connection

Pin arrangement Terminal number Signal name TB1 DA TB2 DB TB3 DG TB4 SLD TB5 +24V TB6 FG TB7 24G

Pin number Signal name CON1-1 X0 CON1-2 X1 CON1-3 X2 CON1-4 X3 CON2-1 X4 CON2-2 X5 CON2-3 X6 CON2-4 X7 CON3-1 X8 CON3-2 X9 CON3-3 XA CON3-4 XB CON4-1 XC CON4-2 XD CON4-3 XE CON4-4 XF CON5-1 Y10 CON5-2 Y11 CON5-3 Y12 CON5-4 Y13 CON6-1 Y14 CON6-2 Y15 CON6-3 Y16 CON6-4 Y17 CON7-1 Y18 CON7-2 Y19 CON7-3 Y1A CON7-4 Y1B CON8-1 Y1C CON8-2 Y1D CON8-3 Y1E CON8-4 Y1F

Terminal number Signal name TB8 COM+

DADBDGSLD

DC/DC+24VFG24G

8 COM+9 COM-

L

L

8 COM+9 COM-

L

R

R

R

R

1

2

3

4

1

2

3

4

21

34567

CON1 to CON4

CON5 to CON8


Load power supply



Insulation


1

CON2

CON1

CON3

CON4

CON5

CON6

CON7

CON8

234

Top view

TB9 COM-

17

[External Dimensions]

(1) AJ65SBTB1-8T1 (2) AJ65SBTB2-8T1, AJ65SBTB32-8DT2, AJ65SBTB1-16DT3

4(0

.16)

AJ65SBTB1-8T1

Y0 1 2 3 4 5 6 7

Y0 Y2 Y4 Y6

Y1 Y3 Y5 Y7

DA DG +24V 24G

DB SLD (FG)

CTL+

COM

124124102040 8

ON

STATION NO. B RATE

87.3 (3.44)

16.5

(0.6

5)

50 (1

.97)

78.3 (3.1 )(Mounting pitch)+1 0

2-4.5 5.1 Mounting hole (M4 mounting screw)

+0.04 0

40 20 10 8 4 2 1 4 2 1B RATESTATION NO.MITSUBISHI PW L RUN L ERR Y0 1 2 3 4 5 6 7

COM

AJ65SBTB2-8T1

DB

DA

SLD

DG +24V 24G

(FG) COMCOMCOM COM COM COM COM DC24GDC24VY7Y6Y5Y4Y3Y2Y1Y0

ON

118 (4.65)

109 (4.29 )(Mounting pitch)+10

4(0

.16)

16.5

(0.6

5)

50 (1

.97)


+0.040

(3) AJ65SBTB2-16T1, AJ65SBTB32-16DT2, AJ65SBTB1-32DT3

4(0

.16)

179 (7.05)

MITSUBISHIAJ65SBTB2-16T1 40 20 10 8 4 2 1 4 2 1

B RATESTATION NO.

ON

DB

DA

SLD

DG +24V 24G

(FG) COMCOMCOMCOM COM COM COM DC24GDC24VYFYEYDYCYBYAY9

COMCOMCOMCOM COM COM COM COM COMY8Y7Y6Y5Y4Y3Y2Y1Y0

PW L RUN L ERR Y0 1 2 3 4 5 6 7 8 9 A B C D E F

89 (3.46)


16.5

(0.6

5)

50 (1

.97)


+0.040

(4) AJ65SBTC1-32T1, AJ65SBTC4-16DT2, AJ65SBTC1-32DT2, AJ65SBTC1-32DT3

4(0

.16)

11(0

.43)

20(0.79)

7.5

(0.3

0)

7.9(0.31)DIN rail

DB

DA

SLD

DG +24V 24G

(FG)

CTL+

COM

PW L RUN L ERR Y0 1 2 3 4 5 6 7 Y8 9 A B C D E F40 20 10 8 4 2 1 4 2 1

B RATESTATION NO.

MITSUBISHI AJ65SBTC1-32T1

ONY1011 12 13 14 15 16 17 Y1819 1A 1B 1C1D1E 1F

Y0-YF

Y10-Y1FY0Y1Y2Y3

Y4Y5Y6Y7

Y8Y9YAYB

YCYDYEYF

Y10Y11Y12Y13

Y14Y15Y16Y17

Y18Y19Y1AY1B

Y1CY1DY1EY1F

40(1.57)

16.5

(0.6

5)

50 (1

.97)


118 (4.65)


+0.040

About 110

Unit:mm(inch)

18

[Manual]

Model name Manual supply status IB/SH number Model code AJ65SBTB1-32DT3 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800209-A -

AJ65SBTB1-16DT3 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800210-A -



AJ65SBTB2-16T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800213-A -



AJ65SBTC1-32DT2 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800216-A -


AJ65SBTC1-32T1 CC-Link System Small Type Remote I/O MODULE USER’S MANUAL Included with the product IB-0800218-A -


CC-Link System Compact Type Remote I/O Module User’s Manual Sold separately SH-4007-K 13JL72

02 (MEE) Specifications subject to change without notice.

Printed in Japan on recycled paper.

Country/Region Sales office Tel/Fax U.S.A Mitsubishi Electric Automation Inc.

500 Corporate Woods Parkway Vernon Hills, IL 60061 Tel : +1-847-478-2100 Fax : +1-847-478-0328

Brazil MELCO-TEC Rep. Com.e Assessoria Tecnica Ltda. Av. Rio Branco, 123-15 ,and S/1507, Rio de Janeiro, RJ CEP 20040-005, Brazil

Tel : +55-21-221-8343 Fax : +55-21-221-9388

Germany Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8 D-40880 Ratingen, GERMANY

Tel : +49-2102-486-0 Fax : +49-2102-486-717

U.K Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Herts., AL10 8XB,UK

Tel : +44-1707-276100 Fax : +44-1707-278695

Italy Mitsubishi Electric Europe B.V. Italian Branch Centro Dir. Colleoni, Pal. Perseo - Ingr.2 Via Paracelso 12, 20041 Agrate B., Milano, Italy

Tel : +39-039-60531 Fax : +39-039-6053312

Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80 08190 - Sant Cugat del Valles, Barcelona, Spain

Tel : +34-935-653135 Fax : +34-935-891579

South Africa Circuit Breaker Industries LTD. Private Bag 2016, Isando 1600, Johannesburg, South Africa

Tel : +27-11-928-2000 Fax : +27-11-392-2354

Hong Kong Ryoden Automation Ltd. 10th Floor, Manulife Tower, 169 Electric Road, North Point, HongKong

Tel : +852-2887-8870 Fax : +852-2887-7984

China Ryoden International Shanghai Ltd. 3F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd. Shanghai 200233 China

Tel : +86-21-6475-3228 Fax : +86-21-6484-6996

Taiwan Setsuyo Enterprise Co., Ltd. 6F., No.105 Wu-Kung 3rd.RD, Wu-Ku Hsiang, Taipei Hsine, Taiwan

Tel : +886-2-2299-2499 Fax : +886-2-2299-2509

Korea HAN NEUNG TECHNO CO.,LTD. 1F Dong Seo Game Channel Bldg., 660-11,Deungchon-dong Kangsec-ku, Seoul, Korea

Tel : +82-2-3668-6567 Fax : +82-2-3664-8335

Singapore Mitsubishi Electric Asia Pte, Ltd. 307 ALEXANDRA ROAD #05-01/02, MITSUBISHI ELECTRIC BUILDING SINGAPORE 159943

Tel : +65-473-2480 Fax : +65-476-7439

Thailand F. A. Tech Co.,Ltd. 898/28,29,30 S.V.CITY BUILDING,OFFICE TOWER 2,FLOOR 17-18 RAMA 3 ROAD,BANGKPONGPANG,YANNAWA,BANGKOK 10120

Tel : +66-2-682-6522 Fax : +66-2-682-6020

Indonesia P.T. Autoteknindo SUMBER MAKMUR JL. MUARA KARANG SELATAN BLOK A UTARA NO.1 KAV. NO.11 KAWASAN INDUSTRI/ PERGUDANGAN JAKARTA - UTARA 14440

Tel : +62-21-663-0833 Fax : +62-21-663-0832

India Messung Systems Put,Ltd. Electronic Sadan NO:111 Unit No15, M.I.D.C BHOSARI,PUNE-411026

Tel : +91-20-7128927 Fax : +91-20-7128108

Australia Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, PostalBag, No 2, Rydalmere, N.S.W 2116, Australia

Tel : +61-2-9684-7777 Fax : +61-2-9684-7245

HEAD OFFICE : 1-8-12, OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212, JAPANNAGOYA WORKS : 1-14, YADA-MINAMI5, HIGASHI-KU, NAGOYA, JAPAN

MITSUBISHI NEW PRODUCT RELEASE · combined model AJ65SBTC1-32DT3 ... Protection function None...

Documents

Transcript of MITSUBISHI NEW PRODUCT RELEASE · combined model AJ65SBTC1-32DT3 ... Protection function None...