MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT...

132
MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments Andrew C. Kadak Ronald Ballinger 2nd International Topical Meeting on High Temperature Reactor Technology Beijing, China September 22-24, 2004

Transcript of MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT...

Page 1: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Modular Pebble Bed Reactor (MPBR)

A Summary of Research Activities and AccomplishmentsAndrew C. KadakRonald Ballinger

2nd International Topical Meeting on High Temperature Reactor Technology

Beijing, ChinaSeptember 22-24, 2004

Page 2: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Students Who Have Worked on the Project

• Heather MacLean• Jing Wang• Julian Lebenhaft• Marc Berte• Chunyun Wang• Tieliang Zhai• Tamara Galen• Jeremy Johnson• Elton Dean• Jennifer Anderson• Paul Owen

• Nate Carstens• Daniel Walker• Andreea Chisca• Ryan Kabir• Michael Stawicki• Richard Watkins• Ian Parrish• Victoria Anderson• Paige Hopewell• Ishna Trivedi• Mark Laughter

Page 3: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

• Dean Wang• Jacob Eapen• Tanya Burka• Lars Gronning• Nicholas Hernandez• Mathew Aichele• Jaehyuk Choi• Rhett Creighton• Dandong Feng• Catherine Goff• Jeff Hung• William Kennedy• Ashley Finan

• Scott Mahar• Marina Savkina• Timothy Alvey• Chang W. Kang• Allan Smith• Mark Wright• Frank Yao• Jamie WarburtonFaculty:• David Gordon Wilson (ME)• Sidney Yip• Michael Driscoll• Richard Lanza• Martin Bazant (Math)

Page 4: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments
Page 5: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments
Page 6: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments
Page 7: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Our Vision for1150 MW Combined Heat and Power Station

Turbine Hall Boundary

Admin

Training

ControlBldg.

MaintenanceParts / Tools

10

9

8

7

6 4 2

5 3 1

0 20 40 60 80 100 120 140 160

0

20

40

60

80

100

Primary island withreactor and IHX

Turbomachinery

Ten-Unit VHTR Plant Layout (Top View)(distances in meters)

Equip AccessHatch

Equip AccessHatch

Equip AccessHatch

Oil Refinery

Hydrogen ProductionDesalinization Plant

VHTR Characteristics- Temperatures > 900 C- Indirect Cycle - Core Options Available- Waste Minimization

Page 8: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT’s Pebble Bed Project

• Developed Independently

• Indirect Gas Cycle• Real Modularity• High Automation• License by Test

Page 9: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Project Overview

• Fuel Performance• Fission Product Barrier

(silver migration)

• Core Physics• Safety

Loss of CoolantAir Ingress

• Balance of Plant Design• Modularity Design• Intermediate Heat

Exchanger Design

• Core Power Distribution Monitoring

• Pebble Flow Experiments• Non-Proliferation• Safeguards• Waste Disposal• Reactor Research/

Demonstration Facility• License by Test• Expert I&C System -

Hands free operation

Page 10: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT MPBR SpecificationsThermal Power 250 MW - 120 MweTarget Thermal Efficiency 45 %Core Height 10.0 mCore Diameter 3.5 mPressure Vessel Height 16 mPressure Vessel Radius 5.6 mNumber of Fuel Pebbles 360,000Microspheres/Fuel Pebble 11,000Fuel UO2Fuel Pebble Diameter 60 mmFuel Pebble enrichment 8% Uranium Mass/Fuel Pebble 7 gCoolant HeliumHelium mass flow rate 120 kg/s (100% power)Helium entry/exit temperatures 520oC/900oCHelium pressure 80 barMean Power Density 3.54 MW/m3

Number of Control Rods 6

Page 11: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Features of Current Design

Three-shaft ArrangementPower conversion unit2.96Cycle pressure ratio900°C/520°CCore Outlet/Inlet T126.7 kg/sHelium Mass flowrate

48.1% (Not take into account cooling IHX and HPT. if considering, it is believed > 45%)

Plant Net Efficiency120.3 MWNet Electrical Power132.5 MWGross Electrical Power250 MWThermal Power

Page 12: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Current Design Schematic

Generator

522.5°C 7.89MPa 125.4kg/s

Reactor core

900°C

7.73MPa

800°C

7.75MPa

511.0°C 2.75MPa

96.1°C 2.73MPa

69.7°C 8.0MPa

509.2°C 7.59MPa 350°C

7.90MPa

326°C 105.7kg/s

115 °C

1.3kg/s69.7°C

1.3kg/s

280 °C520°C 126.7kg/s

HPT 52.8MW

Precooler

Inventory control

Intercooler

Bypass Valve

Circulator

IHX

Recuperator

LPT 52.8MW

PT 136.9MW

799.2 C 6.44 MPa

719.°C 5.21MPa

MPC2 26.1 MW

MPC1 26.1MW

LPC 26.1 MW

HPC 26.1MW

30 C 2.71MPa

69.7 C 4.67MPa

Cooling RPV

Page 13: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

BOP System Analysis and Dynamic Simulation Model Development

Student: Chunyun WangAdvisor: Prof. Ronald G. Ballinger

Page 14: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Objectives• Develop an advanced design for a pebble bed

reactor power plant system with high efficiency and minimum capital cost– Net efficiency > 45%– Must be achievable with current technology or

minimal extension of technology• Develop a dynamic simulation model to determine

the control structure, investigate the control schemes and simulate the transients

Page 15: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Model DevelopmentT/H Steady State & Dynamic Model Development

Steady State Model Dynamic Model

T,P distribution

Fission power, components’ overall

performance

Optimum cycle pressure ratio, plant net efficiency

Component physical parameters, control

scheme

Load transient simulation

Page 16: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Design Constraints• Compliance with ASME code

– Section III, Class 1 Pressure Boundary (Nuclear side)

– Section VIII (where applicable)• Build with achievable extension of

Technology• Using “ESKOM-Like” reactor as heat source• Components must be commercially feasible

Page 17: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Consequences of Indirect Cycle• Advantages

– Section VIII used for BOP (Exclusive IHX)– Non-radioactive maintenance– Air/Water ingress to primary less likely– Less of a “loose parts” problem

• Disadvantages– Efficiency penalty– System complexity– IHX “operating curve” required– Vessel cooling system– Primary system volume control

Page 18: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX & Recuperator Design Data (Printed Circuit HX configuration)—By Concepts-

NRECIHX Recuperator

Effectiveness(%) 90 92.5 95 95 95 95Hot side pres. loss(%) 1.60 1.68 1.77 0.8 1.4 2.0Cold side pres. Loss(%) 2.00 2.00 2.00 0.13 0.23 0.33Number of Modules 6 6 6 30 30 30Module Width (mm) 600 600 600 600 600 600Module Length(mm) 885 1013 1255 648 694 727Module Height (mm) 2773 3014 3454 2745 2042 1693Est. Weight (kg) 38,854 50,669 76,233 155,585 126,260 110,821Cost (million $) 4.53 5.91 8.88 2.59 2.10 1.84

Page 19: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Dynamic Model Development

Page 20: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Dynamic Model Structure

Component ModelComponent Model

Heat Exchanger

Valve

Turbo Machines

Gas merge & splitting

Generator

Control Loops

Pipe

PCU cycle &Inventory vessel

Algorithm(Solving P)Algorithm(Solving P)

Reactor Core

ACSLACSL

Page 21: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Component Models• Reactor core

– Thermal-hydraulic model: two-dimensional– Core neutronics: Point kinetics equations– Fission product poisoning– Temperature coefficient of reactivity (Doppler effect)

• Heat Exchanger– Lumped parameter modeling approach

(Has been verified with the HX model of Flownet)• Turbomachines

– Use normalized non-dimensional characteristic maps of turbine and compressor (By combination of the nondimentional parameters, the Correct mass flowrate Wc, Correct speed Nc, the axial turbine map collapses into one line for different speed line)

• PI controller algorithm

Page 22: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Control Methods and Control Objective

• “Primary” system:– Control rod position: Combined with the negative

temperature coefficient of reactivity to control the reactivity and core outlet temperature

– Circulator rotational speed: Adjusting the coolant mass flow rate in the “primary” loop allows the mass flow rates of two loops are identical

• “Secondary” system– (1) Bypass valve: For rapid load decreases

(2) Inventory control: For less rapid load reductions and load increasesTo maintain the power turbine’s shaft speed constant

Page 23: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Control Scheme• 100% power (Normal Steady State)

– Full primary and secondary mass flowrate• 100% --> 50% ramp

– Fast response: Bypass control– Slow response: Inventory control– Inventory in the secondary system is decreased

gradually. After reaching new steady state, bypass valve is closed or “feathered”.

• 50% --> 100% ramp– Inventory control

• 50% <--> 0% ramp– Bypass control (Automatic or manual)

Page 24: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

10% Load Step Reduction—Bypass valve mass flowrate

00.5

11.5

22.5

33.5

4

0 20 40 60 80 100

Time (sec)

Mas

s flo

wra

te(k

g/s)

Bypass Valve

Page 25: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Summary

• Analyses of balance of plant have been performed for cycle optimization

• Plant cycle design has been defined and the MBPR net efficiency can reach 45% with achievable technology

• A dynamic model has been developed for plant dynamic simulation and HX sub-model has been verified

• The preliminary control scheme has been designed• 10% load rejection, both for centrifugal compressors and axial

compressors, has been simulated, and its results agree, in general, with the results of a model for a similar system developed using FlowNet

Page 26: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MPBR Modularity

Marc V Berte

Prof. Andrew Kadak

Page 27: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Modularity Progression

• Conventional Nuclear Power Systems• Assembled on site• Component-level transportation• Extensive Site Preparation

• Advanced Systems• Mass Produced / “Off the Shelf” Designs• Construction / Assembly Still Primarily on Site

• MPBR• Mass Produced Components• Remote Assembly / Simple Transportation &

Construction

Page 28: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MPBR Modularity Plan

• Road- Truck / Standard-Rail Transportable– 8 x 10 x 60 ft. 100,000 kg Limits

• Bolt-together Assembly– Minimum labor / time on site required– Minimum assembly tools– Goal: Zero Welding

• Minimum Site Preparation– BOP Facilities designed as “Plug-and-Play” Modules– Single Level Foundation– System Enclosure integrated into modules

• ASME Code compliant– Thermal expansion limitations– Code material limitations

Page 29: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Space Frame Technology for Shipment and Assembly

Page 30: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Current MIT/INEEL Design Layout

Reactor Vessel Intermediate Heat Exchangers

Turbo-generator

Recuperators

High Pressure Turbine and Compressor

Low Pressure Turbine and Compressor

Precooler

Page 31: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Reactor Vessel

IHX Vessel

High Pressure Turbine

Low Pressure Turbine

Compressor (4)

Power Turbine

Recuperator Vessel

Present Layout

Page 32: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Plant With Space Frames

Page 33: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments
Page 34: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

For 1150 MW Electric Power Station

Turbine Hall Boundary

Admin

Training

ControlBldg.

MaintenanceParts / Tools

10

9

8

7

6 4 2

5 3 1

0 20 40 60 80 100 120 140 160

0

20

40

60

80

100

Primary island withreactor and IHX

Turbomachinery

Ten-Unit MPBR Plant Layout (Top View)(distances in meters)

Equip AccessHatch

Equip AccessHatch

Equip AccessHatch

Page 35: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

AP1000 Footprint Vs. MPBR-1GW

~400 ft.

~200 ft.

Page 36: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Intermediate Heat ExchangerDesign

Prof. R. Ballinger, P. StahleJim Kesseli - Brayton Energy

Page 37: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Heat Exchanger Design

• Two Concepts IdentifiedCompact Plate-Fin (NREC)PCHE Design (Heatric)

• Base Designs Established• Model Developed for System Analysis• Limitations Identified

Page 38: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Compact Plate-Fin Old Design (NREC)

Page 39: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Printed Circuit Design (Heatric)

Page 40: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX Primary Conditions

• Inlet– Temperature 900oC– Pressure 7.73 Mpa

• Outlet– Temperature 509oC– Pressure 7.49 Mpa

• Flow ~130 Kg/s

Page 41: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX Secondary Conditions

• Inlet– Temperature 488oC– Pressure 7.99 Mpa

• Outlet– Temperature 879oC– Pressure 7.83 Mpa

• Flow ~130 Kg/s

Page 42: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX Modular Assembly Isometric View

• Six units per assy.• Interconnection piping

between units• Pipe loops relieve

expansion stress• Small units for ease of

fabrication and maintenance.

Page 43: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX Design Data (Concepts-NREC)

Effectiveness (%) 90 92.5 95Hot Side Pres. Loss (%) 1.60 1.68 1.77Cold Side Pres. Loss (%) 2.00 2.00 2.00Number of Modules 6 6 6Module Width (mm) 600 600 600Module Length (mm) 885 1013 1255Module Height (mm) 2773 3014 3454Est. Wt. PC Config. (kg) 38,854 50,669 76,233Est. Wt. PF Config. (kg) 10,335 13,478 20,278Cost (M$) 4.53 5.91 8.88

Page 44: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Heat Exchanger Core Modules

• Printed Circuit 92%– Wt 111,700 lb.– Ht Same as PF– Wd Same as PF– Dp Same as PF

• 18 Req’d for IHX

• Plate Fin 92% Eff– Wt 30,000 lb.– Ht 118”– Wd 24”– Dp 40”

• 18 Req’d for IHX

Page 45: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

IHX Unit Pressure Vessel

• Dia. 90.5”• Thk. 2”• Ht. 240”• Wt. 90,000 lb

– (inc. Plate Fin xch.)

Page 46: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Cooled Internal Volume

• Temp. 288oC• Press. ~8 Mpa• ASME Sec III Bndry• Piping grouped by

temperature• Internal legs for

flexibility

Page 47: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Primary Internals

• (3) Plate Fin Core Modules

• Core Modules Suspended to accommodate expansion

Page 48: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Plate Fin Grouping

• Primary Inlet• Primary Outlet

• Secondary Inlet• Secondary Outlet

Page 49: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Future Plans• Join with industrial partner(s) to develop

highest temperature IHX (900-950 C) possible using current material knowledge for Hydrogen demonstration plant.

• Identify key design issues for higher temperatures including transients.

• Work on materials challenges for higher temperature operation.

• Modular approach allows for testing.

Page 50: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Proposed Test Programfor Advanced High Temperature Plate Fin HX (800 - 1000 C)

Figure 6 Unit Cell Pressure FatigueTest at Elevated Temperature.This test conducts numerous pressurecycles on three cells at elevatedtemperature (800 and 1000 C). At eachselected pressure, the cycling willcontinue to failure (ie gas leakage is outof spec). The test will be performed atthree to five pressures of increasingmagnitude. The data will be formulatedinto an endurance plot. The results willbe used to calibrate and validate theanalytical models. The MIT high-temperature furnace is capable of heatingthree or more cells to 1000 C.

Figure 7 Unit cell Creep Test andElevated Temperatures.This test will use a modified version ofthe rig MIT high temp furnace. The testsare performed at steady pressure andtemperature conditions. An empiricalLarsen-Miller map of the cell is createdby operating the cell to failure at twoelevated temperatures, 800 and 1000 C.The pressures imposed on the cell will beselected to induce failure at intervalsranging from one hour to 1000 hours.Failure is indicated by the cells inabilityto maintain the leak specification. Aftercompleting the mapping, three cells willbe subjected to the design pressure andtemperature and left to operateindefinitely. Inspection will be made atregular intervals.

Figure 8 Thermal Strain Measurementfor model Validation.This test rig will heat a sub-core (5 ormore cells) to an elevated temperature,but not so high as to compromise theaccuracy of piezoresistive strain gauges.Transient temperature and strainmeasurements will be recorded whileflowing very cold gas generated from aliquid nitrogen bath on one side andcombustion products from a commercialburner on the other side.

Proof of manufacturability, demonstration of mechanical integrity, and validation of analytical life predictionmodels are critical steps towards the qualification of the proposed high temperature heat exchanger. Thisprogram will address a these three steps by fabricating and instrument roughly 30 IHX cells for a series ofrigorous endurance tests and characterizing.

MIT/Brayton Energy

1. Unit Cell Pressure Fatigue Test

2. Unit cell Creep Test

3. Thermal Strain Measurement for model Validation.

Page 51: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Hydrogen MissionModularity Flexibility

HydrogenPlant A

SecondaryIHX - Helium to Molten Salt?

HydrogenPlant B

May use one or more IHX’s from base electric plant for H2

Page 52: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

An Integrated Fuel Performance Model for Modular Pebble Bed Reactor

Jing WangProfessor R. G. Ballinger

Page 53: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Fuel Performance Model• Detailed modeling of fuel kernel• Microsphere• Monte Carlo Sampling of Properties• Use of Real Reactor Power Histories• Fracture Mechanics Based• Considers Creep, stress, strains, fission

product gases, irradiation and temperature dependent properties.

Page 54: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Fuel Performance The Key Safety System

• Develop Fuel Performance Model• Develop an optimized design for reliability• Work with manufacturer to optimize• Make fuel and test

Page 55: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Integrated Fuel Performance ModelPower Distribution in the Reactor Core

Sample a pebble/fuel particle

Randomly re-circulate the pebble

Get power density, neutron flux

t=t+∆t

T distribution in the pebble and TRISO

Accumulate fast neutron fluence

FG release (Kr,Xe)PyC swelling

Mechanical model

Failure modelMechanical ChemicalStresses FP distributionStrength Pd & Ag

Failed

In reactor core

Y

10 times

1,000,000 times

MC Outer Loop

MC inner loop

N

N

Y

Monte Carlo outer loop:

Samples fuel particle statistical characteristics

MC inner loop:

Implements refueling scheme in reactor core

Page 56: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Simulation of Refueling - cont’d

0.0E+00

2.0E+06

4.0E+06

6.0E+06

8.0E+06

1.0E+07

1.2E+07

1.4E+07

1.6E+07

0 100 200 300 400 500 600 700 800

Irradiation time (days)

Pow

er d

ensi

ty (W

/m^3

)

A typical power history of a pebble in MPBR core

Page 57: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Simulations

Fuel Type Kernel Density (g/cm3)

Kernel Diameter

(µm)

Buffer Thickness

(µm)

IPyC Thickness

(µm)

SiC Thickness

(µm)

OPyC Thickness

(µm)

NPR UCO 10.70 195 100 53 35 43

HTTR UO2 10.96 600 60 30 25 45

NPR — New Production Reactor (USA)HTTR — High Temperature Test

Reactor (Japan)

Page 58: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Circumferential Stresses in NPR & HTTR Type Fuel

-800

-600

-400

-200

0

200

400

0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2

Fast Neutron Fluence (10^21nvt)

Stre

ss (M

Pa) IPyC_NPR

SiC_NPR

OPyC_NPR

IPyC_HTTR

SiC_HTTR

OPyC_HTTR

Page 59: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

NPR & HTTR Type Fuel Reliability in MPBR Environments

0.1017%

13.30%

SiC Failure Probability

16.22%

17.07%

OPyCFailure

Probability

0.1017%5.660%1,000,000HTTR type fuel

13.30%27.79%1,000,000NPR type fuel

Particle Failure

Probability

IPyCFailure

Probability

Cases Sampled

All particle failures observed were induced by IPyC cracking

Page 60: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Fuel Design Parameters

-6-6SiC Weibull Modulus530.73300530.73300SiC Fracture Toughness (MPa.µm1/2)

-9-9SiC Characteristic Strength (MPa.m3/Modulus)1.736435SiC Thickness (µm)2.2401040OPyC Thickness (µm)-9.5-9.5OPyC Weibull Modulus-24-24OPyC Characteristic Strength (MPa.m3/Modulus)-1.9-1.9OPyC Density (g/cm3)

0.005431.057880.005431.05788OPyC Initial BAF4411040IPyC Thickness (µm)-9.5-9.5IPyC Weibull Modulus-24-24IPyC Characteristic Strength (MPa.m3/Modulus)-1.9-1.9IPyC Density (g/cm3)

0.005431.057880.005431.05788IPyC Initial BAF10.3941890Buffer Thickness (µm)

-2.25-2.25Buffer Theoretical Density (g/cm3)0.051.050.051.05Buffer Density (g/cm3)14.149720500Kernel Diameter (µm)

-10.95-10.95Kernel Theoretical Density (gm/cm3)0.0110.40.0110.4Kernel Density (gm/cm3)0.1960.196Uranium Enrichment (%)

UncertaintyAs-Fabricated Value

UncertaintyDesign ValueParameter

Page 61: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Fuel Performance Model Development Path

Steady StateTransient &

AccidentInitial Steady State Model

• Initial Probabilistic Fracture Mechanics Model• Simple Chemistry Model

Advanced Steady State Model• Advanced Fracture Mechanics Model• Ag Migration & Release Model

Complete Steady State Model• Detailed Chemical Model• Detailed Layer Degradation Model

Initial Transient &Accident Model

Complete Transient &Accident Model

Current DevelopmentStatus

Page 62: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Conclusions• A fuel performance model has been developed

which can simulate fuel behavior in Pebble Bed Reactor cores

• Monte Carlo simulations can be performed to account for particle-to-particle variability in fabrication parameters as well as variability in fueling during operation

• Results have been compared with other models and with actual fuel performance.

• Model can be used to optimize fuel particle design

Page 63: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Silver Transport in Silicon Carbidefor High-Temperature Gas Reactors

Heather J. MacLeanProfessor Ronald Ballinger

Page 64: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Barrier Integrity

• Silver Diffusion observed in tests @ temps• Experiments Proceeding with Clear

Objective - Understand phenomenon• Focus on Grain SiC Structure Effect

Page 65: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Silver Ion ImplantationSiC masks on sample frame

Light transmission through SiC mask and sample

• 161 MeV silver beam, peak at 13 µm• 93 MeV silver beam, peak at 9 µm• implanted ~1017 ions = ~2 atomic % silver• measure silver concentration profiles• examine SiC damage

Page 66: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Ion Implantation Silver Depth Profile

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

0 2 4 6 8 10 12 14 16 18

Depth (µm)

Ato

mic

Con

cent

ratio

n (%

)

Ag as implanted

Ag after 210 hr heat

Sample 2b

2a2b

No silver movement No silver movement after 210 hr at 1500after 210 hr at 1500°°CC

Predicted Profile

Page 67: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Spherical Diffusion Couple Experiments

RESULTS• No silver in SiC depth profiles• Mass loss after heating• Leak rates increased after heating

Diffusion couple(cross-section)

CVD SiC coating

graphite or SiC shell

silver

optical microscopy from top of graphite-SiCdiffusion couple

Page 68: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Calculated Silver Diffusion (from release)

1.E-19

1.E-18

1.E-17

1.E-16

1.E-15

1.E-14

1.E-13

1.E-12

1.E-11

1.E-10

3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5

104/T (K)

Rel

ease

Coe

ffici

ent (

m2 /s

)

SelectedLiterature Data

Amian & Stovercalculated fit

1000oC1200oC1600oC

D calculated from silver release (literature)

Nabielek et al. ion implantation limit

low silver concentration

~2 ppm

high silver concentration (unit activity)

Mas

s Tr

ansf

er C

oeffi

cien

ts (m

2 /s)

Release coefficients calculated from silver release

(current experiments)100 ppm boundary condition

R e l e a s e c o e f f i c i e n t s c a l c u l a t e d f r o m s i l v e r r e l e a s e

( c u r r e n t e x p e r i m e n t s )

2 ppm boundary condition

Page 69: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Silver Mass Loss

0

0.2

0.4

0.6

0.8

1

1.2

1000 1200 1400 1600 1800

Heating Temperature (oC)

Frac

tiona

l Silv

er L

oss

0

0.2

0.4

0.6

0.8

1

1.2

1000 1200 1400 1600 1800

Heating Temperature (oC)

Frac

tiona

l Silv

er L

oss

0

0.2

0.4

0.6

0.8

1

1.2

1000 1200 1400 1600 1800

Heating Temperature (oC)

Frac

tiona

l Silv

er L

oss

SiC-1graphite shell, standard SiC coating

SiC-2graphite shell, modified SiC coating

SiC-3SiC shell, standard SiC coating

(normalized to seam area)

Page 70: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Possible Nano-Cracking• Nanometer-sized features (cracks) observed in

experimental SiC coating in AFM (atomic force microscopy)

• Mechanical pathway• Origin not yet known• Stresses from differential thermal expansion

between individual SiC grains may cause nano-scale cracks

• May be aggravated by thermal cycling• Consistent with fuel performance discussions at

ORNL

Page 71: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Conclusions• Silver does not diffuse through intact, fine-grained SiC

– no change in silver concentration profiles– no silver movement despite increased grain boundary

area• Vapor migration governs silver release from CVD SiC

coatings – mass release observed, but silver profiles not found– increased leak rates indicate mechanical cracks

• Transport model will compare proposed mechanisms with literature data

• Continued SiC development needs to focus on identifying and eliminating crack path

Page 72: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Core Physics• Basic tool Very Special Old Programs (VSOP)• Developing MNCP Modeling Process • Tested Against HTR-10 Benchmark• Tested Against ASTRA Tests with South

African Fuel and Annular Core

Page 73: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Nuclear Engineering Department

Modeling ConsiderationsPacking of Spheres

Spheres dropped into a cylinder pack randomly

Packing fraction ~ 0.61

Repeated-geometry feature in MCNP4B requires use of a regular lattice

SC, BCC, FCC or HCP?

BCC/BCT works well for loose sphere packing

Random Close Packed

Body Centered Cubic

5

Page 74: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Nuclear Engineering Department

HTR-10 MCNP4B Model

12

Reactor

TRISO fuel particle Core

Fuel sphere Core lattice

Page 75: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Nuclear Engineering Department

MCNP4B/VSOP Model Output

Top ofcore

top

0

161

242

402

483

644

725

0 108 13

4 175

0

1

2

3

4

5

6

7

8

MW

/m3

Axial Position (cm)

Radial Position

(cm)

Power Density in PBMR Equilibrium CoreControl Rods 1/4 Inserted (z = 201.25 cm)

7.00E+00-8.00E+006.00E+00-7.00E+005.00E+00-6.00E+004.00E+00-5.00E+003.00E+00-4.00E+002.00E+00-3.00E+001.00E+00-2.00E+000.00E+00-1.00E+00

Power density in annular core regions

25

Page 76: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Nuclear Engineering Department

ASTRA Critical Experiments

Sidereflector

Central h l

Core

Mixing zone

Internalreflector

Experimentalchannels

CR - Control dMR1 - Manual control dSR - Safety dE1-E6 - Experimental chambers

h l1-9 - Experimental channels for d t tPIR,ZPT,ZII,ZRTA - Ionization chambers and neutron

tNeutron source channel

SR2

SR3 CR5 SR7

E5SPU2

PIR

PIR

E6

ZII2ZRTA4

E1

SPU3

E2

ZIIЗ ZRTA1

E3

E4

ZII1

SPU1ZRTA2

ZPT2

ZII1ZRTA3

CR4

SR6

MR1

SR5

CR3

SR4SR8 CR2

SR1

CR1

a b c d e f g h j k l m n i o

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

A

B

Kurchatov Institute, MoscowMockup of PBMR annular core

Inner reflector: graphite spheres (M)10.5 cm ID 72.5 cm OD

Mixed zone: 50/47.5/2.5 (M/F/A)105.5 cm OD

Fuel zone: 95/5 (F/A)181 cm OD (equiv.)

Core height: 268.9 cm

packing fraction = 0.64 2.44 g U/FS, 21% U235, 0.1 g B/AS 5 CRs, 8 SRs, 1 MRCR = 15 s/s tubes with B4C powder6 in-core experimental tubes

13

Page 77: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

ASTRA Conclusions

• Criticality Predictions fairly close (keff = .99977)

• Rod Worth Predictions off 10%• Analysis Raises Issues of Coupling of Core

Page 78: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT Nuclear Engineering Department

HTR-10 (Beijing)10 MW Pebble Bed Reactor: Graphite reflector Core: Rc = 90 cm, H ≤ 197 cm TRISO fuel with 5 g U/Fuel Sphere 17% U235 F/M sphere ratio = 57:43, modeled

by reducing moderator sphere size Initial criticality December 2000

1.00081±0.00086K-eff

128.5 cmCritical Height

16,890Actual Loading

16,830Calculated Loading

MCNP4B Results

9

Page 79: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Safety

Tieliang ZhaiProf. Hee Cheon No (Korea)

Professor Andrew Kadak

Page 80: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Safety Issues

• Loss of Coolant Accident• Air Ingress • Reactor Cavity Heat Removal

Page 81: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Safety

• LOCA Analysis Complete - No Meltdown• Air Ingress to study fundamental processes

and benchmark Computational Fluid Dynamics Codes- Conservative analysis show no “flame”- Address Chimney effect - Address Safety of Fuel < 1600 C- Use Fluent for detailed modeling of RV

Page 82: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Massachusetts Institute of TechnologyDepartment of Nuclear Engineering

Advanced Reactor Technology Pebble Bed Project

MPBR-5

Page 83: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Temperature ProfileFig-10: The Temperature Profile in the 73rd Day

0

200

400

600

800

1000

1200

1400

1600

0 1 2 3 4 5 6 7 8 9 10 11

Distance to the Central Line

Tem

pera

ture

(C)

Vessel

Core Reflector Cavity Soil

ConcreteWall

Page 84: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

The Prediction of the Air Velocity(By Dr. H. C. No)

Fig-14: Trends of maximum temperature for 0, 2, 4, 6 m/s of air velocity in the air gap region

0

200

400

600

800

1000

1200

1400

1600

1800

0 30 60 90 120 150 180 210Time (hr)

Tem

pera

ture

(C)

Hot-PointTemperature of thecore(0m/s)Hot-PointTemperature of theVessel (0m/s)Hot-PointTemperature of theConcrete Wall (0m/s)Hot-PointTemperature of theCore (2m/s)Hot-PointTemperature of theVessel (2m/s)Hot-PointTemperature of theConcrete Wall (2m/s)Hot-PointTemperature of theCore (6m/s)Hot-PointTemperature of theVessel (6m/s)Hot-PointTemperature of theConcrete Wall (6m/s)Limiting Temperaturefor the Vessel

Limiting Temperaturefor the Containment

Page 85: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Air Ingress

Vary Choke Flow

Bottom Reflector

Air In

Air/COx out• Most severe accidents among PBMR’sconceivable accidents with a low occurrence frequency.

• Challenges: Complex geometry, Natural Convection, Diffusion, Chemical Reactions

Page 86: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Air Ingress Velocity f(temperature) Fig-2: Air Inlet Velocity Vs. the Average Temp. of the Gases

0

0.01

0.02

0.03

0.04

0.05

0.06

0.07

0.08

0.09

0 400 800 1200 1600 2000 2400 2800 3200

the Average Temp. of the Gases (C)

Air

Inle

t Vel

ocity

(m/s

)

Page 87: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Preliminary ConclusionsAir Ingress

For an open cylinder of pebbles:

• Due to the very high resistance through the pebble bed, the inlet air velocity will not exceed 0.08 m/s.

• The negative feedback: the Air inlet velocity is not always increase when the core is heated up. It reaches its peak value at 300 °C.

• Preliminary combined chemical and chimney effect analysis completed - peak temperatures about 1670 C.

Page 88: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Simplified HEATING7 Open Cylinder AnalysisPeak TemperatureFigure 3: The peak temperature

800

900

1000

1100

1200

1300

1400

1500

1600

1700

0 50 100 150 200 250 300 350 400

time(hr)

Tem

pera

ture

(C)

Page 89: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Analysis Results

0

300

600

900

1200

1500

1800

0 400 800 1200 1600 2000

Time (hour)

Hot

-Poi

nt T

empe

ratu

res

(C)

Hot-Point Temperature of the CoreHot-Point Temperature of the Pressure Vessel

Hot-Point Temperature of the Concrete Wall

Figure 9: Hot-Point Temperatures

Page 90: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Sensitivity Analysis - Emissivity

0

400

800

1200

1600

0 400 800 1200 1600 2000Time (hr)

Hot

-Poi

nt T

empe

ratu

res

(C

Core Hot-Point Temperature (Benchmark E=0.73)Core Hot-Point Temperature(Emissivity=0.01)Core Hot-Point Temperature(Emissivity=1)Wall Hot-Point Temperature (Benchmark E=0.73)Wall Hot-Point Temperature (Emmisivity=0.01)Wall Hot-Point Temperature (Emmisivity=1)

Figure 11: Hot-Point Temperature Sensitivity to Emissivitiesof Vessel and Concrete Wall in the LOCA Analysis

Page 91: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Sensitivity Analysis-Conductivity.

0

300

600

900

1200

1500

1800

0 300 600 900 1200 1500 1800 2100Time (hr)

Tem

pera

ture

(C)

Core Hot-Point TemperatureWhen the Conductivity of theSoil and Concrete Wall is0.54w/m.C (BenchmarkCondition)Core Hot-Point TemperatureWhen the Conductivity of theSoil and Concrete Wall is5w/m.C

Core Hot-Point TemperatureWhen the Conductivity of theSoil and Concrete Wall is10w/m.C"

Concrete Wall Hot-PointTemperature When theConductivity of the Soil andConcrete Wall is 0.54w/m.C(Benchmark Condition)Concrete Wall Hot-PointTemperature When theConductivity of the Soil andConcrete Wall is 5w/m.C

Concrete Wall Hot-PointTemperature When theConductivity of the Soil andConcrete Wall is 10w/m.C

Figure 12: Hot-Point Temperature Sensitivity to the Conductivityof Soil and Concrete Wall in the LOCA Analysis

Page 92: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Conclusions for LOCA Analysis

• No meltdown occurs• The temperatures of the concrete wall and the steel

pressure vessel are above their safety limit• The safety objectives can not been satisfied by the

improvement of the thermal properties • A convective term, natural or forced, is needed to

cool the concrete wall and the pressure vessel

Explain this somewhere

Page 93: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Air Ingress AnalysisComputational Fluid Dynamics

• Benchmark to Japanese Diffusion, Thermal and Multi-Component Tests

• Benchmark to NACOK air ingress tests• Use FLUENT CFD code to develop

methodology

Page 94: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Experimental Apparatus - Japanese

C4

270

Nitrogen

Helium

Valves

C3

C1

C2

H4

H3

H2

H1

Figure 16: Apparatus for Isothermal andNon-Isothermal experiments

Figure 17: Structured mesh

Page 95: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Isothermal Experiment

0.00

0.20

0.40

0.60

0.80

0 50 100 150 200 250 300Time (min)

Mol

e fra

ctio

n

H-1 & C-1(Calculation)H-2 & C2 (Calculation)H-3 & C3 (Calculation)H-4 & C4 (Calculation)H-1 & C-1(Experiment)H-2 & C2 (Experiment)H-3 & C3 (Experiment)H-4 & C4 (Experiment)

Figure 18: Mole fraction of N2 for the isothermal experiment

Page 96: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Thermal Experiment

Figure 19: The contour of the temperature bound4ary condition

Pure Helium in top pipe,

pure Nitrogen in the

bottom tank

N2 Mole fractions are

monitored in 8 points• Hot leg heated• Diffusion Coefficients as a

function of temperature

Page 97: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Thermal Experiment

0

0.2

0.4

0.6

0.8

1

0 50 100 150 200

Time (min)

Mol

e fra

ctio

n of

N2

H-1(FLUENT)C-1(FLUENT)H-1(Experiment)C-1(Experiment)

Figure 20: Comparison of mole fraction of N2 at Positions H-1 and C-1

0

0.2

0.4

0.6

0.8

1

0 50 100 150 200

Time(min)

Mol

e Fr

actio

n

H2(Experiment)C2(Experiment)H-2(FLUENT)C-2(FLUENT)

Figure 21: Comparison of mole fraction of N2 at Positions H-2 and C-2

Page 98: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Thermal Experiment (Cont.)

0

0.2

0.4

0.6

0.8

1

0 50 100 150 200 250

Time(min)

Mol

e Fr

actio

n of

N2

H4(Exp)C4(Exp)

H-4(Calc)C-4(Calc)

Figure 22: Comparison of mole fraction of N2 at Positions H-1 and C-1

-0.15

-0.10

-0.05

0.00

0.05

0.10

0.15

0.20

0.25

0 2 4 6

Time (Second)

Velo

city

(m/s

econ

d)

Figure 23: The vibration after the opening of the valves.

Page 99: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Multi-Component Experiment(Cont.)• Chemical Reactions

– 1 surface reaction:C + O2 = x CO + y CO2 (+ Heat)

– 2 volume Reactions:2 CO + O2 = 2CO2 ( + Heat)2 CO2 = 2 CO + O2 (- Heat)

nooc p

RTEKr

2)exp( 0

0 −=−

Figure 35: The temperature boundary conditions for the multi-component experiment

Page 100: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Multi-Component Experiment(Cont.)

0.00

0.03

0.06

0.09

0.12

0.15

0.18

0.21

0 20 40 60 80 100 120 140

Time(min)

Mol

e Fr

actio

n

O2(Experiment)O2(Calculation)CO(Experiment)CO(Calculation)CO2(Experiment)CO2(Calculation)

Figure 36: Mole Fraction at Point-1 (80% Diffusion Coff.)

Page 101: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Multi-Component Experiment(Cont.)

Figure 37: Mole Fraction at Point-3

0.00

0.04

0.08

0.12

0.16

0.20

0.24

0 20 40 60 80 100 120 140Time(min)

Mol

e Fr

actio

n

O2(Experiment)O2(Calculation)CO(Experiment)CO(Calculation)

CO2(Experiment)CO2(Calculation)

Page 102: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Multi-Component Experiment(Cont.)

Figure 38: Mole Fraction at Point-4

0.00

0.05

0.10

0.15

0.20

0.25

0 20 40 60 80 100 120 140Time (min)

Mol

e Fr

actio

n

O2(Experiment)O2(Calculation)CO(Experiment)CO(Calculation)CO2(Experiment)CO2(Calculation)

Page 103: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

NACOK Natural Convection Experiments no cont.

Figure 39: NACOK Experiment

Page 104: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Boundary Conditions

Figure 41: Temperature Profile for one experiment

Page 105: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

The Mass Flow Rates

Figure 42: Mass Flow Rates for the NACOK Experiment

0.0E+00

1.0E-03

2.0E-03

3.0E-03

4.0E-03

100 300 500 700 900 1100

Temperature of the Pebble Bed (C)

Mas

s Fl

ow R

ate

(kg/

s

5.0E-03

)

T_R=200 DC(Exp.)T_R=400 DC(Exp.)T_R=600 DC(Exp.)T_R=800 DC(Exp.)T_R=200 DC(FLUENT)T_R=400 DC(FLUENT)T_R=600 DC(FLUENT)T_R=800 DC(FLUENT)

Page 106: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Verify the Chemical Model (FLUENT 6.0)

Page 107: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

The Detailed Model in Progress

Page 108: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Detailed Bottom Reflector

Page 109: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Summary• Air Ingress is a potentially serious event for high

temperature graphite reflected and moderated reactors (prismatic and pebble).

• Realistic analyses are necessary to understand actual behavior

• Based on realistic analyses, mitigation strategies are required.

• Good news is that long time frames are involved at allow for corrective actions (70 to 200 hours).

• MIT working on detailed analysis of the event with baseline modeling and testing with German JulichNACOK upcoming tests on air ingress.

Page 110: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Extrinsic Safeguards ProtectionSystem for Pebble Bed Reactors

Proposed Concept

Page 111: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Extrinsic Safeguards System for Pebble Bed Reactors

WastePackage

Fresh Fuel Room

ScrapWaste Can

Typical Waste Storage Room

Page 112: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Waste Disposal Conclusions

• Per kilowatt hour generated, the space taken in a repository is less than spent fuel from light water reactors.

• Number of shipments to waste disposal site 10 times higher using standard containers.

• Graphite spent fuel waste form ideal for direct disposal without costly overpack to prevent dissolution or corrosion.

• Silicon Carbide may be an reffective retardant to migration of fission products and actinides.

Page 113: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Pebble Flow

• Issue is the central graphite column and its integrity

• Don’t want fuel pebble in graphite or graphite pebble in fuel

• How to assess flow to assure high power peaks do not occur that could lead to fuel failure

Conducted Experiment to determine flow

Page 114: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Radial Fuel DistributionRadial Fuel Distribution

•• A central core of pure A central core of pure graphite reflector graphite reflector pebbles is surrounded pebbles is surrounded by an annulus of a by an annulus of a 50/50 fuel50/50 fuel--andand--reflector mix, and a reflector mix, and a larger annulus of pure larger annulus of pure fuel pebbles.fuel pebbles.

Page 115: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Half Model Data Collection

Page 116: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Comparison to Design Profile

0

10

20

30

40

50

60

70

80

90

0 10 20 30Width (cm)

Hei

ght (

cm)

-Velocity Profile very similar

- Very flat until the funnel region

30°, 4 cm exit

07.mpg 09.mpg

Movie Clips

Page 117: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Trial with Central Column

Page 118: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Video Demo 19.mpg

20.mpg

21.mpg

22.mpg

23.mpg

Page 119: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

StreamlinesConfirmed by 3D Experiment

0 5 10150

20

40

60

80

100

-5 0 5

0

5

10

x (cm)

y (c

m)

Page 120: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Slow Flow Results

• Used drill to remove pebbles at 120 /min.

• Flow lines still linear

Page 121: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Shaping Ring for Central Column Formation

Bottom ofShaping ring

• Shaping ring used to form central column at top 3 inches

• Rest open - no ring• Column maintained

during slow drain down.

Page 122: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Core Monitoring System

Imaging of Core Tracer Ball Method

Page 123: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Visually speaking…K

N

InverseRadon

TransformR

IProjection (line integrals)

Perfect

Reconstruction!

Attenuation correction function

Page 124: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Summary

•Nitrogen tracer produces 10.8 MeV gamma ray

•Gamma ray detected by detector ring

•Core is imaged by Tomography

Page 125: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Image of CoreCore Boundary

•Color intensity proportional to gamma flux measured by detector

Page 126: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Radial Neutron Flux (0-175cm) Profile of PBMR Core10th slice (370 cm)

Page 127: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Summary

Neutron flux is reconstructed

Result of tomography

Page 128: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

License By Test

• Build a research/demonstration plant-reactor research facility

• Perform identified critical tests• If successful, certify design for

construction.

Page 129: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Risk Informed Approach

• Establish Public Health and Safety Goal• Demonstrate by a combination of deterministic

and probabilistic techniques that safety goal is met.

• Using risk based techniques identify accident scenarios, critical systems and components that need to be tested as a functional system.

Page 130: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

MIT’s Project Innovations

• Advanced Fuels• Totally modular - build in a factory

and assemble at the site• Replace components instead of repair• Indirect Cycle for Hydrogen

Generation for fuel cells & transportation

• Advanced computer automation• Demonstration of safety tests

Page 131: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Future Research Activities• Build and Test Advanced Plate Fin IHX

Design• Benchmark new series of NACOK Air

Ingress Tests with CFD.• Perform Pebble Flow Experiments to

Reduce Central Column By-pass Flow• Expand Fuel Performance Model to handle

rapid transients (rod ejection)• Make and Test Advanced Fuel Particles

with Tsinghua University

Page 132: MIT Modular Pebble Bed Reactor (MPBR)web.mit.edu/pebble-bed/Presentation/PBRproject.pdf · MIT Modular Pebble Bed Reactor (MPBR) A Summary of Research Activities and Accomplishments

Summary• MIT Project aimed at advanced pebble bed

reactor development with focus on innovation in design, modularity, license by test, using a full scale reactor research facility to explore different fuel cycles, process heat applications, and advanced control system design, helium gas turbines and other components.

• Desire Collaborations to develop international confidence in the technology, safety,economics and practicality.

• We have a unique opportunity to develop pebble bed reactors but it is time critical