Misc. Parts for L2020, L2020GT, L3020 &...

Description Part Number Price

Seal Kit, Fan Motor (All) (incl. Oil seal, Excluder, O-ring & spedi-sleeve) 72548 $118.28

Seal/Retainer Kit, Fan Motor (All) (incl. 72548 & 33777 assembled & spedi-sleeve) Not for new style motors 305944 & 305950

72549 $198.92

Seal, Oil (All) 71980 $25.81

Excluder (Dust Seal) 33809 $12.90

O-ring seal 28494 $0.29

Retainer, Seal (not for new style motors 305944 & 305950) 33777 $91.40

Rubber Slinger 72294 $2.26

Driver, for Seal 71980 24536 $12.00

Driver, for Spedi-sleeve 71980-1 306429 $6.57

Seal Tool 23940 $5.40

Hole Punch #5 Belt 24386 $23.76

Shaft for 23800 & 36580 Spinner Motors 28485 $215.05

Spedi-Sleeve for Shaft 28485 71980-1 $33.45

Motor, Fan (for L2020, L2020GT) (was 23800) 305944 $701.88

Motor, Fan (for L3020, L3020GT) (was 36580) 305950 $720.35

Fan Assy. - R.H. (incl. Disc, Fins & Hub assembled) 14372 $387.10

Fan Assy. - L.H. (incl. Disc, Fins & Hub assembled) 14373 $387.10

Fin, R.H. (replaces 25870) 309091 $32.26

Fin, L.H. (replaces 25871) 309092 $32.26

Disc, Standard-duty (R.H or L.H.) 27056 $102.15

Disc, Heavy-duty, 1/4” (R.H. or L.H.) 57830 $161.29

Gate Jack Assy. (incl. 85002 U-joint) 85005 $311.83

U-Joint, Stainless Steel 85002 $106.45

Handle, Gate Jack 14382 $29.26

Belt #5, 11 ft. box 305307-AD $1223.53

Belt #5, 12 ft. box 305307-AE $1295.22

Belt #5, 12.5 ft box 305307-AF $1328.68

Belt #5, 13 ft. box 305307-AG $1362.13

Splice Kit for #5 Belt (individual pieces are availiable) 53995 $338.71

Bearing, 4-bolt (Drive Roller) 6465 $60.22

Bearing, 2-bolt (Snubber Roller) 32468 $35.48

Bearing, Take-up 22511 $36.56

Seal, Gear Case Output shaft 37006 $9.63

Spedi-Sleeve for seal 37006) 37006-1 $38.32

Shield Group, #5 - 11 ft. (incl. hardware) 39609 $220.43


Shield Group, #5 - 12.5 ft. (incl. hardware) 97867 $354.84



Shield Group, #4 - 12.5 ft. (incl. hardware) 97870 $736.56


Hydraulic Filter (spin-on) 43530 $16.52

Valve, Fan Control (L2020, L2020GT) 32485 $209.68

Valve, Fan Control (L3020, L3020GT) 43510 $209.68

Gauge, Hydraulic Tank Level w/Temp 38575 $38.71

Indicator, Plugged Filter 43534 $41.94

Misc. Parts for L2020, L2020GT, L3020 & L3020GT

AMES, IA: 1-800-779-7979 518 MARSHALL, MO: 1-800-889-6161

Note: M.S. = Mild Steel S.S. = Stainless Steel NS = Not Shown AR = As Required

Ref. Part No. M.S. Part No. 409 S.S.

Part No. 304 S.S.

Description Qty.

1 2884 36384 36384 Slide, Feedgate- L.H. 1 2 2885 36385 36385 Slide, Feedgate- R.H. 1 3 83664 83665 83666 Feedgate Assy. - consists of 3a - 3f 1 3a 83661 83662 83663 Weldment, Feedgate 1 3b 13816 13816 13816 Belt, Sealer 1 3c 7084 38756 36388 Retainer, Sealer 1 3d 20619 36405 36405 Capscrew 5 3e 20642 36412 36412 Nut 5 3f 20712 36418 36418 Washer 5 4 85005 85005 85005 Jack Assy. - consists of 4a - 4c 1 4a 40704 40704 40704 Jack 1 4b 20918 20918 20918 Roll Pin 2 4c 85002 85002 85002 U-joint 1 5 14382 14382 14382 Handle 1 6 85002 85002 85002 U-joint 1 7 20918 20918 20918 Roll Pin 2 NS 84221 84221 84221 Repair Kit, Jack AR


Ref. Part No. MS Part No. SS Description Qty.

1 6465 6465 Bearing, 4-bolt flange 2

2 32468 32468 Bearing, 2-bolt flange 2

3 53982 53982 #5 Belt, 10’ (251”) AR

3 53983 53983 #5 Belt, 11’ (275”) AR

3 53984 53984 #5 Belt, 12’ (299”) AR

3 55454 55454 #5 Belt, 12-1/2’ (311”) AR

3 53985 53985 #5 Belt, 13’ (323”) AR

4 39572 43793 Pulley, Drive 1

5 33875 36366 Pulley, Snubber 1

6 81343 81344 Pulley, Idler 1

7 81345 81345 Spacer 2

8 81354 81354 Set Screw- 3” 1

9 36417 36417 Nut 1

10 20319 36409 Carriage Bolt- 3/8 x 1-1/4 12

11 20712 36420 Lockwasher- 3/8 12

12 20644 36414 Nut 12

36507 36507 Take-up Assy. (includes items 13 - 18 & 20) 2

13 7895 7895 Take-up bracket weldment 2

14 39110 39110 Nut weldment 2

15 36508 36508 Tightener Screw 2

16 22511 22511 Bearing, Take-up 2

17 30725 30725 Collar 2

18 20925 20925 Roll Pin 2

19 53995 53995 Splice kit, #5 Belt (includes 39603 splice pin; [4] 53992 1-bolt fastener; [2] 53993 2-bolt fastener; [4] 53994 3-bolt fastener; [2] 33884-23 belt stiffener tape; [2] 39604-23 sealer tubes)

1

(19) 39603 39603 Splice Pin (coated cable) 1

20 36509 36509 Hex Nut - 1” 2

Note: MS = Mild Steel SS = Stainless Steel AR = As Required


Item Part No. Description Qty. Req. 43501 Gear case assy. (complete) 1 1 2564 Breather 1 2 6031 Plug .375” 2 3 20040 Capscrew 5/16” x 2” 9 4 20711 Lock washer 5/16” 9 5 27465 Bushing .375 x .125 1 6 44403 Housing, outer 1 7 37002 Housing, inner 1 8 304561 Gear, pinion 1 9 38981 Gear, driven 1 10 37005 Gasket 1 11 37006 Seal, oil 111a 37006-1 Spedi-sleeve for 37006 seal (if needed) AR 12 37007 Bearing 1 13 37008 Bearing 3


Item Style I Part No.

Style II Part No.

Description Qty. Req.

36671 36671 Gear Case Assy. - Single Pinion 11 304559 304559 Housing - Outboard 12 304560 304560 Housing - Inboard 13 304561 304561 Gear - Pinion 11 Tooth 24 38981 304562 Gear - Driven 67 Tooth 15 37007 37007 Bearing 26 37008 37008 Bearing 47 37006 37006 Seal - Oil 18 38979 38979 Washer, 2-1/2 x 11/32 19 6031 6031 Plug 1

10 37005 304563 Gasket - Housing 111 20040 20040 Cap Screw. 5/16 NC x 2 912 20711 20711 Lock Washer, 5/16 913 2564 2564 Breather 114 27465 27465 Bushing, 3/8 x 1/8 115 21490 21490 Plug - Magnetic 116 38980 38980 Screw, 5/16 x 1 Allen head 117 37010 37010 Key, 1/2 x 1/2 x 1-1/2 2


Single Pinion Gear Case - No Mark II

Note: Spedi Sleeve for seal (37006) is available as PN. 37006-1

Motor Gasket - 74524Spacer - 34650

24” Spinner Fan Assembly (3 blade fans)

Ref. Part No. Description Qty. 1 20128 Capscrew- 1/2-13 x 1-1/4 SS 2 2 20714 Lockwasher- 1/2 SS 12 3 10877 Hub 2 4 27056 Disc, distributor- standard 2 4 57830 Disc, distributor- Heavy duty 2 5 20676 Lock nut- 1/4 SS 12 6 20004 Capscrew- 1/4-20 x 7/8 SS 12 7 20034 Capscrew- 5/16-18 x 3/4 18 8 25870 Fin weldment- R.H. 3 9 20677 Hex Nut- 5/16 18 10 25871 Fin weldment- L.H. 3 11 305944 Motor- L2020 (was 23800) 2 11 305950 Motor- L3020 (was 36580) 2 12 14373 Distributor assy.- standard L.H. (in-

cludes items 3 - 9) 1

13 14372 Distributor assy.- standard R.H. (in-cludes items 3 - 9)

1

14 Ref. Fan Frame 1 15 36940 Carriage bolt- 1/2-13 x 2 SS 4 16 36426 Flatwasher- 1/2 SS 4 17 Ref. Brace 2 18 36416 Hex Nut- 1/2-13 SS 4 19 36398 Capscrew- 3/8-16 x 1 SS 4 20 36425 Flatwasher- 3/8 SS 4

Ref. Part No. Description Qty. 21 36420 Lockwasher- 3/8 SS 4 22 36414 Hex Nut- 3/8-16 SS 4 23 82964 Shield weldment- R.H. SS 1 24 82965 Shield weldment- L.H. SS 1 25 36399 Capscrew- 3/8-16 x 1-1/4 SS 2 26 36402 Capscrew- 1/2-13 x 1-1/4 SS 6 27 72294 Washer- Rubber 2 28 43510 Valve, flow divider- L2020 1 28 71781 Valve, flow divider- L3020 1 29 Ref. Capscrew AR 30 Ref. Capscrew AR 31 Ref. Flatwasher AR 32 Ref. Lockwasher AR 33 Ref. Hex Nut AR 34 76825 Spacer SS 2


Ref. Part No. Description Qty. 1 33777 Retaining ring, Seal ** 1 2 28485 Shaft 1 3 33809 Excluder, dust seal * / ** 1 4 71980 Seal, Oil * / ** 1 5 28494 O-ring * / ** 1 6 41014 Bearing cone 2 7 41013 Bearing cup 2 8 28454 Spacer 1 9 28486 Spacer kit 1 10 6089 Snap ring 1 11 28490 Cover, shaft end 1 12 58797 Plug 2 13 28495 Bushing (motor 23800 only) 1 14 23806 Bearing 4 15 23819 Pocket seals (makes 12 seals) 1 16 23818 Wear plate 2

Ref. Part No. Description Qty. 17 23820 Gasket 2 18 28498 Housing (motor 23800) 1 18 38687 Housing (motor 36580) 1 19 23822 Gear set (motor 23800) 1 19 23824 Gear set (motor 36580) 1 20 23812 Cover, port end 1 21 NA Washer 4 22 23833 Capscrew (motor 23800) 4 22 20190 Capscrew (motor 36580) 4 23 24458 Key 1 * 72548 Seal kit (includes 3, 4, 5 & 71980-

1) ** 72549 Seal/retainer assy. (includes 1, 3,

4, 5 & 71980-1) 72547 Repair Kit (includes 1, 3-7, 9, 13,

15 & 17) NS 71980-1 Wear sleeve for shaft 28485 */ ** AR

Parts for spinner motors: 23800 used on 2020 36580 used on 3020Note: see parts listing for new style motors305944 & 305950


New Style Spinner Motors: 305944 used on 2020 models 305950 used on 3020, 3220 & L4000 modelsNote: these motors replace 23800 & 36580

Ref. Part No. Description Qty. 1 306091 Retainer ring * 1 2 306093 Shaft assy. (threaded) incl. 6 - 10 1 3 33809 Excluder, dust seal * 1 4 71980 Seal, Oil * 1 5 28494 O-ring * 1 6 306093 Bearing cone 7 306093 Bearing cup 8 306093 Spacer 9 306093 Lockwasher 10 306093 Nut, lock 11 306087 Cover, shaft end 1 12 58797 Plug 2 13 28495 Bushing 1 14 23806 Bearing 4 15 23819 Pocket seals (makes 12 seals) 1

Ref. Part No. Description Qty. 16 23818 Wear plate 2 17 23820 Gasket 2 18 28498 Housing (motor 305944) 1 18 41954 Housing (motor 305950) 1 19 23822 Gear set (motor 305944) 1 19 23824 Gear set (motor 305950) 1 20 23812 Cover, port end 1 21 NA Washer 4 22 23833 Capscrew (motor 305944) 4 22 20190 Capscrew (motor 305950) 4 23 24458 Key 1 * 305824 Seal/retainer assy. (includes 1 &

3 - 5)


Note: Some 16’ units require special heavy duty sprockets and other related parts for front and rear of conveyor. Check serial number.


See parts listing on next page.

L3020GT Belt-Over Chain ConveyorDrive Group

Ref QtyM.S. S.S.

1 82882 82885 4 Bearing Guide

2 6465 6465 2 Bearing

3 20748 20748 4 Set Screw

4 38600 38600 1 Shaft, Drive

5 6131 6131 2 Key

6 27275 27275 2 Sprocket, Drive

7 37010 37010 2 Key

8 1 Gear Case Asm.

13 82550 82552 1 Weldment, Torque Arm

Idler GroupRef Qty

M.S. S.S.

1 36508 36508 2 Weldment, Tightener Screw

2 7895 7895 2 Weldment, Take-Up Bracket

3 39110 39110 2 Weldment, Nut

4 20925 20925 2 Roll Pin

5 30725 30725 2 Collar

6 22511 22511 2 Bearing, Take-Up

7 1899 1899 2 Sprocket, Idler

8 82799 82799 1 Shaft, Idler

9 2135 2135 2 Key

10 20743 20743 4 Set Screw

11 12 Bolt, Carriage- 3/8" x 1"

12 12 Washer, Lock

13 12 Nut

Part no. Description

Part no. Description

Note: Some 16’ units require special heavy duty sprockets and other related parts for front and rear of conveyor. Check serial number.



See parts listing on next page.

Removeable Endgate, Feedgate & JackRef. Part no.

Carbon Steel

Part no.409 Stain-less Steel

Part no.304 Stain-less Steel


1 96379 86773 86952 Endgate Weldmt. (Removable) 12 20128-X1 20128-X1 20128-X1 Capscrew 1/2 x 1-1/4” GR8 43 20695 20695 20695 Flatwasher 1/2” 84 20714 20714 20714 Lockwasher 1/2” 45 20646 20646 20646 Nut 1/2” 46 14382 14382 14382 Handle 1- 14261 55868 71509 Feedgate Assy.- L3020 (incl. 7-10, 12 & 13) 1- 83664 83665 83666 Feedgate Assy.- L2020 (incl. 7-10, 12 & 13) 17 14262 55867 71510 Feedgate Weldmt.- L3020 17 83661 83662 83663 Feedgate Weldmt.- L2020 18 27296 27296 27296 Belt, Sealer- L3020 18 13816 13816 13816 Belt, Sealer- L2020 19 27297 55870 55870 Retainer, Belt- L3020 19 7084 38756 36388 Retainer, Belt- L2020 110 20621 36405 36405 Screw 1/4 x 1” 711 20006 40750 40750 Capscrew 1/4 x 1-1/4” 612 20710 36418 36418 Lockwasher 1/4” 1313 20642 36412 36412 Nut 1/4” 1314 2884 36384 36384 Slide, Feedgate LH 115 2885 36385 36385 Slide, Feedgate RH 116 85002 85002 85002 U-joint SS 117 20918 20918 20918 Roll Pin 218 40704 40704 40704 Jack Assy. 1- 84221 84221 84221 Repair Kit for jack 40704 (incl. 19-25)- 85005 85005 85005 Gate Jack Assy. w/U-joint (incl. 16-18) 1

19 84210 84210 84210 Washer, Thrust 120 84211 84211 84211 Bearing, Thrust 121 84212 84212 84212 Washer 122 84213 84213 84213 Bushing 223 84214 84214 84214 Gear, Miter 224 84215 84215 84215 Pin, Groove 125 84216 84216 84216 Roll Pin 126 86878 86878 86878 Hairpin 127 20138 80798 80798 Capscrew 1/2 x 3-3/4” 128 20680 39016 39016 Nut 1/2” 129 20074 36296 36296 Capscrew 3/8 x 2-3/4” 130 20678 72054 72054 Nut, Lock 3/8” 1



G4 Conveyor Idler

Ref. Part No. Description Qty. Req.

36507 Take-up assy. (includes 1 - 6 & 11) 1 36508 Tightener screw weldment 2 2 7895 Take-up bracket weldment 2 3 39110 Nut weldment 2 4 20925 Roll pin 2 5 30725 Collar 2 6 22511 Bearing, Take-up 2 7 97051 Sprocket, Idler 2 8 82799 Shaft, Idler 1 9 2135 Key 2 10 20743 Set screw 4 11 36509 Hex nut - 1” 2 12 36408 Bolt, carriage 3/8 x 1 12 13 36420 Washer, lock 3/8 12 14 36414 Hex nut, 3/8 12


G4 Conveyor Drive


1 86999 Shaft, drive 1 2 6465 Bearing 2 3 88276 Sprocket 2 4 20743 Set screw 4 5 6131 Key 2 6 82885 Guide, bearing 4 7 36399 Cap screw, 3/8 x 1-1/4” 8 8 36420 Lock washer 3/8 8 9 36414 Hex nut 3/8 8 10 82552 Bracket, torque arm LH 1 11 20833 Cotter pin 1/4 x 1-1/2” 1 12 2716 Flat washer 3/4” 2 13 20128 Cap screw 1/2 x 1-1/4” 2 14 20680 Nut, lock 1/2 2 15 37010 Key 1/2 x 1-1/2 (Not Shown) 2 16 56264 Cap/plug, plastic 1

Ref. Part no.Carbon Steel

Part no.Stainless Steel


87096 87095 24” Fan Assy. 87106 87106 Fan Assy.- LH (includes items 32 & 35-40) 187105 87105 Fan Assy.- RH (includes items 32 & 35-40) 1

1 87051 87090 Plate, Back 12 87013 87082 Mount, Motor Weldmt. 13 87021 87021 Shaft, Support Weldmt. 14 87065 87023 Plate, Shaft Mount 15 87032 87032-X1 Guard, Spinner Weldmt. 16 87024 87024 Handle 17 87170 87170 Jack, Coated Assy. 18 87025 87025 Angle, Valve Mount 19 71781 71781 Valve, Flow Divider 1

10 305950 305950 Motor, Hydraulic (was 36580) 211 20128 36402 Capscrew 1/2 x 1-1/4” 1212 20695 36426 Flatwasher 1/2” 413 20714 36422 Lockwasher 1/2” 10

24” Hydraulic Fans (4 blade fans)


24” Hydraulic Fan Assy.- continuedRef. Part no.

Carbon Steel

Part no.Stainless Steel


14 20680 39016 Nut, Lock 1/2” 415 20127 36401 Capscrew 1/2 x 1” 216 20067 36398 Capscrew 3/8 x 1” 417 20693 36425 Flatwasher 3/8” 418 20712 36420 Lockwasher 3/8” 419 20644 36414 Nut 3/8” 420 6072 6072 Zerk, Grease 421 6547 6547 Pin, Clevis 122 87048 87048 Pin, Clevis 123 40576 40576 Hairpin 224 85002 85002 U-joint SS 125 20010 34865 Capscrew 1/4 x 2-1/4” 126 20005 36395 Capscrew 1/4 x 1” 127 20691 36423 Flatwasher 1/4” 128 20710 36418 Lockwasher 1/4” 229 20642 36412 Nut 1/4” 230 20918 20918 Roll Pin 231 72294 72294 Washer, Rubber 232 27056-X4 27056-X4 Disc, Distributor, RH 133 27056-X5 27056-X5 Disc, Distributor, LH 134 10877 10877 Hub 235 20004 20004 Capscrew 1/4 x 7/8” 1236 20676 20676 Nut, Lock 1/4” 1237 25870 25870 Fin Weldmt.- RH 438 25871 25871 Fin Weldmt.- LH 439 20034 20034 Capscrew 5/16 x 3/4” 2440 20677 20677 Nut, Lock 5/16” 2441 6461 76825 Spacer 1NS 20430 36411 Bolt, Carriage 1/2” 4NS 20695 36426 Flatwasher 1/2” 4NS 20714 36422 Lockwasher 1/2” 4NS 20646 36416 Nut 1/2” 4NS 87110 87110 Decal, Fan adjustment 1

NS = Not Shown


Dual Pinion Gear Case - Mark IV

Ref. Part no. Description Qty. req.55971 Gear Case Assy. 1

1 2564 Breather 12 6031 Plug 23 20040 Capscrew 5/16 x 2” 104 20711 Lockwasher 5/16” 105 27465 Bushing, Pipe 1/8 x 3/8 96 55974 Housing- Outboard, Mark IV.4 17 38982 Housing- Inboard 18 304561 Gear, Pinion 29 38981 Gear 1

10 38978 Gasket 111 37006 Seal, Oil 112 37007 Bearing 213 37008 Bearing 414 20431 Set Screw 5/16 x 3/4” 115 38979 Washer 116 38980 Screw, Allen Head 1

Note: Spedi Sleeve for seal (37006) is available as P/N 37006-1

Hydraulic Motor- 1-1/4” Modified_P/N 82462Hydraulic Motor- 1/1/4” Standard_P/N 82459


Ref. Style I Part No.

Style II Part No.


37985 37985 Gear Case Assy. (Dickey-john) 11 304557 304557 Housing- Outboard 12 38982 304558 Housing - Inboard 13 304561 304561 Gear - Pinion 11 Tooth 24 38981 304562 Gear - Driven 67 Tooth 15 37007 37007 Bearing 2

6 37008 37008 Bearing 47 37006 37006 Seal - Oil 18 38979 38979 Washer, 2-1/2 x 11/32 19 6031 6031 Plug 1

10 38978 304564 Gasket - Housing 111 20040 20040 Cap Screw, 5/16 NC x 2 1012 20711 20711 Lock Washer, 5/16 1013 2564 2564 Breather 114 27465 27465 Bushing, 3/8 x 1/8 115 21490 21490 Plug - Magnetic 116 38980 38980 Screw, 5/16 x 1 Allen head 117 37010 37010 Key, 1/2 x 1/2 x 1-1/2 2

Note: Spedi Sleeve for seal (37006) is available as PN. 37006-1


Dual Pinion Gear Case - Style I & II

Gasket for motors = 74524


MultApplier Conveyor Drive


1 86761-X2 Shaft, Drive 1-1/2 x 33” 1 2 86757 Sprocket (includes set screws 20743) 2 3 6131 Key 2 4 20743 Set screw 5/16 x 3/8” 4 5 6697 Bearing 2 6 86762 Coupling 1 7 86765 Motor, Hydraulic 1

56293 Seal kit for 86765 motor 1 8 86766 Mount, motor 1 9 21101 Screw, button head 1/2 x 1-1/2” 8 10 72056 Bolt, carriage 1/2 x 1” 2 11 36539 Cap screw 1/2 x 1-1/2” 2 12 36422 Washer, lock 1/2 12 13 36416 Nut, hex 1/2 12 14 304056 Encoder - DJ 360 count w/ hardware 1 14 303994 Encoder - DJ 180 count w/ hardware 1 15 304953-X! Bracket, DJ encoder 1 16 56263 Sleeve, rate encoder (shaft bushing) 1 17 4059 Key 5/16 x 1-1/2” (Not Shown) 1


MultApplier Conveyor Idler


1 89779 Shaft, Idler 1 2 86757 Sprocket (includes set screws 20743) 2 3 6131 Key 2 4 20743 Set screw 5/16 x 3/8” 4 5 22511 Bearing, takeup 2 6 87857 Bolt weldment 2 7 17078 Collar, set 2 8 36417 Nut, hex 5/8 (Not Shown) 2 9 87856 Nut weldment 2

308709 B.O.C. for 5’ MultApplier box AR 308711 B.O.C. for 7’ MultApplier box AR

Misc. Parts for L2020-G4 and L3020-G4 Description Part Number PriceFan Assy. - R.H. (incl. Disc, Hub and Blades) 87105 $392.47Fan Assy .- L.H. (incl. Disc, Hub and Blades) 87106 $392.47Disc only - R.H. 27056-X4 $268.82Disc only - L.H. 27056-X5 $268.82Heavy-duty Fan Assy. - R.H. (incl. H.D. Disc, Hub & Blades) 87105-X2 $483.87Heavy-duty Fan Assy. - L.H. (incl. H.D. Disc, Hub & Blades) 87106-X2 $483.87Heavy-duty Disc only, 1/4” - R.H. 57830-X2 $311.83Heavy-duty Disc only, 1/4” - L.H. 57830-X3 $311.83Fin (Blade) - R.H. (replaces 25870) 309091 $32.26Fin (Blade) - L.H. (replaces 25871) 309092 $32.26Motor, Fan (for 2020G4) replaces 23800 305944 $701.88Motor, fan (for 3020G4) replaces 36580 305950 $720.35Filter Element (spin-on) 43530 $16.52Filter Element (in tank) for new style tank 305066 $33.33Fan Speed Sensor only (for Mark IV.4) 88862 $87.40Fan Speed Sensor Kit (for RAVEN) 117-0159-575 $95.43Remote Driver Board (Mark IV) (black box) 84953 $872.96Motor (Mark IV) 83642 $483.87Cap Assy. (Mark IV) 84939 $607.53Reed Switch Board (Mark IV) 84934 $145.16Mark IV Controller 82930 CALLMark IV.4 Controller 99281 CALLSpreader Test Kit 300508 $510.75

G4 Spinner Retrofit Kits Description Part Number Net Pricefor L2020GT- Carbon Steel- w/Mark III, IV, IV.4 or Dickey-john hydraulics

302526 $3793.81

for L2020GT- Stainless Steel- w/Mark III, IV, IV.4 or Dickey-john hydraulics

302527 $4225.63

for L3020GT- Carbon Steel- w/Dickey-john hydraulics 302534 $4024.25for L3020GT- Carbon Steel- w/Manual hydraulics 302532 $4030.07for L3020GT- Stainless Steel- w/Mark III, IV or IV.4 302531 $5338.67for L3020GT- Stainless Steel- w/Dickey-john hydraulics 302535 $4465.49for L3020GT- Stainless Steel- w/Manual hydraulics 302533 $4471.31


Misc. Parts for L2020, L2020GT, L3020 &...

Documents

Transcript of Misc. Parts for L2020, L2020GT, L3020 &...