Prise en main de la MiraBox

Boot de la MicroSD class 10 8GB avec une partition 1 Boot FAT 32 de 100Megaoctectpartition 2 EXT4 de ~8GB

Download the ARCHLinuxARM and copy all the files in the folder boot in the Boot part of the Micro SD.

Then you can put the Boot Micro SD in the Mirabox and with the help of Putty you can have an interface with your Mirabox, the log boot is normally showed in the Putty's window.

Note: Input with the keyboard didn't match. I have to see in the manager device of windows for the port, the paramaters of the connection. Normally fixed with Putty with the Mirabox Arch Linux Developpers, not all the paramters are treated, I have look in the system Manager of Windows to complete the other paramters like parity, stop bit, flow controls, and after changing those parameters in the Putty Configuration, my Input-Keyboard was functionnal.